Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
DTN DCS
Other
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
Other
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
25-BD-012H TSB
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
24-BD-001H
Service Bulletin/Repair Instructions
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
23-EM-005H
Service Bulletin/Repair Instructions
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
23-BD-007H
Service Bulletin/Repair Instructions
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
23-BD-002H
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
22-EM-010H
Service Bulletin/Repair Instructions
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
22-GI-006H
Service Bulletin/Repair Instructions
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
21-AT-006H
Service Bulletin/Repair Instructions
Hyundai approves only the ATF, DCT gear oil and IVT gear oil specified in the vehicleâÂÂs ownerâÂÂs manual. ï· Use of other ATF may result in improper shift quality or other drivability conditions. ï· Use of other DCT and IVT gear oil may result in reduced durability. Hyundai does not approve the use of any aftermarket ATF or gear oil additives.
21-EM-004H
Service Bulletin/Repair Instructions
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
21-BR-002H
Service Bulletin/Repair Instructions
This bulletin provides best practice recommendations when performing brake service procedures.
21-EM-003H
Service Bulletin/Repair Instructions
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
20-BR-002H
Service Bulletin/Repair Instructions
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
20-SS-004H
Service Bulletin/Repair Instructions
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
20-BD-014H
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
20-SS-002H(1)
Service Bulletin/Repair Instructions
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
20-BD-007H-1
Service Bulletin/Repair Instructions
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
20-EE-003H
Service Bulletin/Repair Instructions
This bulletin provides information on identifying dealer stock vehicles with either: ⢠A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. ⢠A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
20-AT-016H
Service Bulletin/Repair Instructions
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
20-BD-007H
Service Bulletin/Repair Instructions
This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
20-SS-001H
Service Bulletin/Repair Instructions
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
20-BE-001H
Service Bulletin/Repair Instructions
This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
19-BE-011H-1
Service Bulletin/Repair Instructions
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-GI-006H
Service Bulletin/Repair Instructions
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
TSB-09-AT-013
Service Bulletin/Repair Instructions
HYUNDAI: AUTOMATIC TRANSAXLE RANGE SWITCH DIAGNOSTIC TROUBLE CODES P0705 (RANGE SWITCH SIGNAL PROBLEMS), P0707 (RANGE SWITCH OPEN CIRCUIT), AND P0708 (RANGE SWITCH SHORT CIRCUIT OR MULTIPLE INPUTS). AN IMPROPERLY ADJUSTED OR IMPROPERLY OPERATING RANGE SWITCH MAY RESULT IN THE ABOVE MENTIONED CONDITIONS. MALFUNCTION INDICATOR LIGHT (MIL) ILLUMINATED; IMPOSSIBLE ENGINE START IN P OR N. *PE
0640019
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE (DTC) LIST. *KB
0640003
Service Bulletin/Repair Instructions
REMANUFACTURED AUTOMATIC TRANSAXLE DIFFERENTIAL OIL SEAL. *TT
0540018
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST. *TT
158
Service Bulletin/Repair Instructions
REPROGRAMS ARE AVAILABLE FOR AUTOMATIC TRANSAXLE DRIVEABILITY ISSUES. TECHNET TIMES. HYUNDAI. *TT
05360031
Service Bulletin/Repair Instructions
2000-2004 1.5L & 1.6L ACCENT P0130 (OXYGEN SENSOR) AND P0530 (SPEED SENSOR). *SC
0536003
Service Bulletin/Repair Instructions
DIAGNOSTIC TROUBLE CODE (DTC) P0130 (OXYGEN SENSOR MALFUNCTION); DIAGNOSTIC TROUBLE CODE (DTC) P0503 (SPEED SENSOR MALFUNCTION; REVERSE TO DRIVE LURCH WHILE ROLLING BACKWARDS (ON AUTOMATIC TRANSAXLE EQUIPPED VEHICLES ONLY). *TT
151
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST. *TT
0497002
Service Bulletin/Repair Instructions
FD46XG PAG OIL SPECIFICATIONS FOR AIR CONDITIONING COMPONENT REPLACEMENT. *TT
0804
Service Bulletin/Repair Instructions
FD46XG POLY ALKYLEN GLYCOL (PAG) OIL SPECIFICATIONS FOR AIR CONDITIONING COMPONENT REPLACEMENT. *NM
0340007
Service Bulletin/Repair Instructions
ATA SOLENOID DIAGNOSTIC TROUBLE CODES P0740, P0741, P0742, P0743, P0745, P0747, P0748, P0750, P0752, P0753, P0755, P0757, P0758, P0760, P0765. *TT *MJ
0340022
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE PULSE GENERATOR DIAGNOSTIC TROUBLE CODES P0717 & P0722. 2004 ACCENT INCLUDED. *TT
0336024
Service Bulletin/Repair Instructions
RESISTANCE VALUES FOR IDLE SPEED CONTROL ACTUATOR (ISCA). VARIOUS MODELS INCLUDING THE 2004 SONATA. *TT
0340016
Service Bulletin/Repair Instructions
DIAGNOSTIC TROUBLE CODE (DTC) P0722 - PULSE GENERATOR-B INSPECTION AND TCM REPROGRAMMING. *TT
0336017
Service Bulletin/Repair Instructions
SLOWER THAN USUAL ACCELERATION AFTER AN INITIAL COLD START; GREATER THAN USUAL RPM DROP WHEN ENGAGING DRIVE OR REVERSE; CHECK ENGINE LIGHT ON AND P0116 STORED. *TT
0340010
Service Bulletin/Repair Instructions
SHOCK OR DELAYED ENGAGEMENT DURING PARK TO REVERSE OR PARK TO DRIVE SHIFT TRANSMISSION CONTROL MODULE (TCM) REPROGRAMMING INSTRUCTIONS. *TT
0340001
Service Bulletin/Repair Instructions
ATM DIODE PIN CORROSION IN THE CONTROL WIRING HARNESS LOCATED BEHIND THE DASH PANEL. *TT
02010101
Service Bulletin/Repair Instructions
FRONT A-PILLAR BRACKETS - (CAMPAIGN 055). *TT
0201010
Service Bulletin/Repair Instructions
FRONT A-PILLAR BRACKET INSTALLATION (CAMPAIGN 055). *TT
0240022
Service Bulletin/Repair Instructions
SUBJECT REGARDING CHANGE TO CABLELESS TYPE SPEEDOMETER. *TT
0240020
Service Bulletin/Repair Instructions
SUBJECT REGARDING AUTOMATIC TRANSAXLE HARSH AND/OR DELAYED SHIFTS. *JG
0240017
Service Bulletin/Repair Instructions
SUBJECT REGARDING DIAGNOSTIC TROUBLE CODE P0722 - PULSE GENERATOR - B INSPECTION AND TRANSMISSION CONTROL MODULE REPROGRAMMING INSTRUCTIONS. *JG
02360061
Service Bulletin/Repair Instructions
SUBJECT REGARDING ELECTRONIC CONTROL MODULE REPROGRAMMING INSTRUCTIONS FOR P0128. *JG
0240014
Service Bulletin/Repair Instructions
SUBJECT REGARDING AUTOMATIC TRANSAXLE BELLHOUSING COVER. *JG
0240010
Service Bulletin/Repair Instructions
SUBJECT ON AUTOMATIC TRANSAXLE HARSH OR DELAYED PARK REVERSE OR PARK DRIVE ENGAGEMENT. *YH
0240012
Service Bulletin/Repair Instructions
SUBJECT REGARDING AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES LIST. *YH
01400061
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE PULSE GENERATOR DIAGNOSTIC TROUBLE CODES P0717 AND P0722 - REVISED. *JG