Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26-AT-004H TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to a Transmission Control Unit (TCU) software update for some vehicles equipped with an 8-speed wet dual clutch transmission (8WDCT). The software update revises the touch point learning variation, improving drivability and judder symptoms. Certain 8WDCTs (indicated by a new part number) received an updated clutch spring. The correct TCU software update must be matched with the correct corresponding 8WDCT hardware, otherwise, drivability concerns may occur. This service procedure should be performed prior to any 8WDCT replacements done for drivability/judder concerns.
DTN DCS
Other
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
Other
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-AD-001H TSB
Service Bulletin/Repair Instructions
Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
25-BD-012H TSB
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020H TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-01-045H TSB
Service Campaign
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
25-EM-004H TSB
Service Bulletin/Repair Instructions
Certain Elantra N (CN7 N) vehicles may experience a rattle and/or buzzing sound coming from the rear muffler assembly at idle or on deceleration. Follow the service procedure below to replace the spring located in the active valve exhaust system to resolve the concern.
25-BE-005H-2 OL
Warranty Program/Extension
Certain 2021 – 2025 model year Elantra, 2022 – 2025 model year Elantra N and 2021 – 2025 model year Elantra Hybrid vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the Horn Assembly under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owner.
25-FL-003H
Service Bulletin/Repair Instructions
Certain Elantra (CN7), Elantra N (CN7 N), Elantra (CN7A) vehicles may experience a thudding noise coming from the fuel tank assembly at idle or on an incline when the PCSV (Purge Control Solenoid Valve) is operating, and fuel level is above 90% full. If the noise is heard, follow the service procedure to replace the fuel tank assembly and resolve the concern.
25-BE-005H-2 DN
Warranty Program/Extension
Certain Hyundai Elantra (CN7) non N-Line and N-Line, Elantra (CN7A), Elantra (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
25-BE-005H-2 TSB
Warranty Program/Extension
Certain Elantra (CN7) non-N-Line and N-Line, Elantra (CN7A), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
25-BE-002H TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
25-01-024H-1 TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
25-BE-005H-1 DN
Warranty Program/Extension
Certain Hyundai Elantra (CN7) non N-Line and N-Line, Elantra (CN7A), Elantra (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. Please note that any vehicles under 10 years/120,000 miles are covered by this TSB, even if vehicle is within original warranty of 5 years/60,000 miles.
25-BE-005H-1 TSB
Warranty Program/Extension
Certain Elantra (CN7) non-N-Line and N-Line, Elantra (CN7A), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. If a horn needs to be replaced, follow the instructions within this TSB to install the latest design. Please note that any vehicles under 10 years/120,000 miles are covered by this TSB, even if vehicle is within original warranty of 5 years/60,000 miles.
25-01-024H EM
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
25-01-024H TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
25-FL-002H OL
Warranty Program/Extension
Certain 2019 - 2022 model year Veloster N, 2022 - 2023 model year Elantra N, and 2022 - 2023 model year Kona N vehicles may have a Fuel Control Valve (FCV) in the High-Pressure Fuel Pump (HPFP) assemblies that could allow excess fuel to enter the fuel pump. This condition may result in a reduction or loss of motive power at low speeds. The vehicle will also have Diagnostic Trouble Code (DTC) P0088. The warranty coverage for the High-Pressure Fuel Pump (HPFP) has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
25-FL-002H TSB
Warranty Program/Extension
Certain 2019-2022MY Veloster N (JSN), 2022-2023MY Elantra N (CN7N), and 2022-2023MY Kona N (OSN) vehicles are equipped with high pressure fuel pump (HPFP) assemblies that have fuel control valves (FCV) that could allow excess fuel to enter the fuel pump due to gradual wear of the FCV plunger. An air/fuel mixture that runs too “rich” may result in a reduction or loss of motive power at low speeds. The vehicle will also have Diagnostic Trouble Code (DTC) P0088. Hyundai is extending warranty coverage for the HPFP under this condition to 15 years or 150,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
24-EM-010H
Service Bulletin/Repair Instructions
Certain Elantra N (CN7 N), Kona N (OS N), and Veloster N (JS N) vehicles may have DTC P1326 set due to water intrusion in the knock sensor connector during heavy rain or car wash conditions. There is no abnormal engine noise present, and the vehicle may enter “limp home” mode.
24-ST-001H
Service Bulletin/Repair Instructions
N Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicle’s steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed. Additionally, the summer tires on the N vehicles can make the shudder or vibration more pronounced in cold ambient conditions.
24-FL-006H TSB
Service Bulletin/Repair Instructions
Certain vehicles equipped with a 2.0L T-GDI Theta II engine may exhibit one or more misfire DTCs due to the injectors leaking internally. This may be caused by internal filter breakage in the injector. Follow the procedure in this TSB to replace all 4 injectors on affected vehicles, using the kit in the Parts Information section.
24-01-045H-2
Service Campaign
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-01-045H-1
Service Campaign
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-01-045H
Service Bulletin/Repair Instructions
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-BD-001H
Service Bulletin/Repair Instructions
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
23-EM-005H
Service Bulletin/Repair Instructions
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
23-AT-002H
Service Bulletin/Repair Instructions
This bulletin provides service procedures to prevent possible moisture intrusion of the HP EOP (High Flow Electric Oil Pump) connector when servicing the 8-speed wet dual clutch transmission (8WDCT). If moisture enters the HF EOP connector, this can result in corrosion and insufficient connection of the terminals.
23-BD-007H
Service Bulletin/Repair Instructions
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
23-BD-002H
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
22-AT-011H
Service Bulletin/Repair Instructions
This bulletin outlines changes to the service manual regarding the replacement of 8-speed dual clutch transmissions (DCT) and associated transmission control module (TCM). Additional steps, not in the service manual, are required within GDS prior to replacing the DCT/TCM, otherwise drivability concerns and/or DTCs may occur.