Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26-EE-003H TSB
Some vehicles may exhibit difficulty starting in cold weather. This bulletin provides the procedure to perform an inspection on the starter magnetic switch for potential freezing and, if necessary, replace the starter magnetic switch (solenoid) assembly.
DTN DCS
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-AD-001H TSB
Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
P33 OL
In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.
25-EM-007H TSB
Some Elantra (CN7, CN7A), Kona (OS, SX2), and Sonata Hybrid (DN8 HEV) vehicles equipped with 2.0L engines may illuminate a warning lamp for DTC P218100 (Cooling System Performance) related to the Integrated Thermal-Management Module (ITM). Follow the service procedure in this bulletin to install a spring onto the thermostat within the ITM, in order to prevent premature opening, and perform an ECU software update on affected vehicles.
25-01-089H DCS
Upon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. This repair procedure is being provided in addition to the previous Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1).
25-01-089H DN
In addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental security measure is to be installed at the ignition switch location and provides additional protection against the social media theft method. Vehicles not equipped with an immobilizer during production at the factory are eligible. The repair procedure shall be performed and claimed upon customer request only. Any future repairs to these vehicles in which an installed ignition cylinder protector impacts required parts and/or labor, shall be covered by HMA. Please see TSB 25-01-089H for details.
25-01-089H TSB
This bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.
25-BD-012H TSB
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-BE-020H TSB
This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-01-045H TSB
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
25-BE-005H-2 OL
Certain 2021 – 2025 model year Elantra, 2022 – 2025 model year Elantra N and 2021 – 2025 model year Elantra Hybrid vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the Horn Assembly under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use, and is valid for original and subsequent owner.
25-FL-003H
Certain Elantra (CN7), Elantra N (CN7 N), Elantra (CN7A) vehicles may experience a thudding noise coming from the fuel tank assembly at idle or on an incline when the PCSV (Purge Control Solenoid Valve) is operating, and fuel level is above 90% full. If the noise is heard, follow the service procedure to replace the fuel tank assembly and resolve the concern.
25-BE-005H-2 DN
Certain Hyundai Elantra (CN7) non N-Line and N-Line, Elantra (CN7A), Elantra (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
25-BE-005H-2 TSB
Certain Elantra (CN7) non-N-Line and N-Line, Elantra (CN7A), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
25-BE-002H TSB
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
25-01-024H EM
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
25-BE-005H DN
Certain Hyundai Elantra (CN7), Elantra (CN7A), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
25-BE-005H TSB
Certain Elantra (CN7), Elantra (CN7A), and Elantra Hybrid (CN7 HEV) vehicles may experience an inoperable horn. Hyundai is extending the warranty coverage for the horn replacement under this condition to 10 years or 120,000 miles from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners. If a horn needs to be replaced, follow the instructions within this TSB to install the latest design.
25-HA-001H
Certain Elantra (CN7 and CN7A) vehicles may experience the following conditions: • Lack of airflow coming from the forward-facing center vents • Mode actuator not changing airflow direction after various inputs • Popping/snap noise when switching between different modes If any of the conditions above exist, follow the repair procedure in this bulletin to replace the ventilator lever.
24-01-045H-2
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-01-045H-1
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-BE-001H-1
Some vehicles equipped with the AVN 5th Gen Wide system may exhibit a condition where the radio app crashes frequently when entering radio mode and/or displays a message that reads “Uneven Road Ahead, Drive carefully” on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.
24-01-045H
A software update is available for multiple vehicles equipped with either Display Audio 2.0V or the AVN 5th Gen Wide system.
24-01-009H-1
A class settlement against Hyundai Motor America (“HMA”) that had alleged that certain 2011 – 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the “Class Vehicles”) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional “turn-key-to-start” ignition systems.
24-BE-005H
Certain 2021~2022MY Elantra (CN7/CN7A) vehicles may exhibit a warning light with DTC C1620, caused by a distorted signal due to internal contamination of the front radar reception antenna. Customers may also report other systems related to the front radar being inoperative, such as Smart Cruise Control (SCC) or Forward Collision-Avoidance Assist (FCA). Other functions of the Advanced Driver Assistance System (ADAS) are not affected. Follow the procedure in this bulletin to replace the affected front radar unit and perform all related adjustments according to Shop Manual instructions.
24-FL-003H
This bulletin contains the software update procedure for the Engine Control Unit (ECU) on certain 2021-2023MY Elantra (CN7) and 2022-2023MY Kona (OS) vehicles equipped with the 1.6 liter T-GDI Gamma 2 engine, that may exhibit a warning lamp with one or more of the DTCs listed below: ⢠P250F - Engine Oil Level Too Low ⢠P011B, P050C - Engine Coolant Temperature/intake Air Temperature Correlation ⢠P00B7, P2B60 - Engine Coolant Flow Low/Performance
24-BD-001H
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
24-01-009H
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
23-01-014H-6
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
24-BE-001H
Some vehicles equipped with the AVN 5th Gen Wide system may exhibit a condition where the radio app crashes frequently when entering radio mode and/or displays a message that reads âUneven Road Ahead, Drive carefullyâ on the cluster along with a warning sound. Follow the procedure outlined in this bulletin to update the AVN software to resolve this condition.
23-01-014H-5
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
23-EM-005H
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
23-EE-010H
This bulletin is issued to provide the extended battery diagnosis procedure using GDS-M. This battery diagnosis function displays the various battery-related faults such as: ⢠Internal short circuit ⢠Battery deterioration ⢠Malfunction of electronic parts ⢠Insufficient battery charge ⢠Normal battery ⢠Charging defect Battery diagnosis uses the battery sensor history saved for the last 30 days and ICU diagnostic communication to track battery state of charge (SOC) and current parasitic draw history.
23-AT-013H
This bulletin provides information related to a Transmission Control Unit (TCU) software update for certain vehicles equipped with an 8-speed wet dual clutch transmissions (8WDCT) that improves the touch point learning variation. Certain 8WDCTs (indicated by a new part number) received an improved clutch spring. The correct TCU software update must be matched with the correct corresponding 8WDCT hardware, otherwise drivability concerns may occur.
23-AT-010H
Certain vehicles equipped with the Intelligent Variable Transmission (IVT) may experience a check engine light or malfunction indicator light due to Diagnostic Trouble Codes (DTC) listed below. This bulletin provides information on replacing the oil pressure sensor to remedy these DTCs, rather than replacing the entire IVT assembly.
23-BE-010H
Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
23-BE-007H
This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundaiâs Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
23-01-036H-1
Certain Hyundai Elantra, Sonata, and Santa Fe vehicles may exhibit the Electronic Parking Brake (EPB) warning light on due to brake fluid entering the HECU (Hydraulic Electronic Control Unit) electrical connector. DTC C1501 (EPB Switch Failure) may be present, but EPB performance remains unaffected.
23-01-014H-4
Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
23-01-036H
Some Elantra (CN7A), Sonata (DN8A) and Santa Fe (TMA) vehicles may exhibit the Electronic Parking Brake (EPB) warning light on due to brake fluid entering the HECU electrical connector. DTC C1501 (EPB Switch Failure) may be present, but EPB performance remains unaffected. This bulletin describes the procedure to inspect, and if necessary, replace the Hydraulic Electronic Control Unit (HECU).
23-BD-007H
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
23-01-014H-3
Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
23-01-016H
Certain 2022-23MY Elantra (CN7/CN7a), 2022-23MY Elantra N (CN7 N), and 2023MY Elantra Hybrid (CN7 HEV) vehicles normally equipped with two (2) complete Smart Key FOBs were delivered with only one (1) complete Smart Key FOB and one additional mechanical key. A second Smart Key FOB can now be provided to the customer. Please refer to TSB 23-01-016H (or latest version) for parts and programming information.
23-BD-002H
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
22-01-076H-1
Some 2021 ~ 2022MY Elantra (CN7, CN7a, CN7 HEV) vehicles may exhibit a condition with multiple warning lights displayed on the instrument cluster and various symptoms; multiple DTCs (Diagnostic Trouble Code), reduction in power steering assist, and not able to shift out of Park. Possible DTCs set are: ⢠C181287 â CAN Time-out Gateway ⢠C181208 â CAN Time-out Gateway ⢠C180581 â LKAS CAN Signal Error ⢠C181887 â CAN Time-out BCA ⢠B109052 â TCU Missing Error This bulletin provides the service procedure to update the ICU (Integrated Central Control Unit) software to resolve the conditions stated above.
22-01-076H
Some 2021 ~ 2022MY Elantra (CN7, CN7a, CN7 HEV) vehicles may exhibit a condition with multiple warning lights displayed on the instrument cluster and various symptoms; multiple DTCs (Diagnostic Trouble Code), reduction in power steering assist, and not able to shift out of Park. Possible DTCs set are: C181287 â CAN Time-out Gateway, C181208 â CAN Time-out Gateway, C180581 â LKAS CAN Signal Error, C181887 â CAN Time-out BCA, B109052 â TCU Missing Error This bulletin provides the service procedure to update the ICU (Integrated Central Control Unit) software to resolve the conditions stated above.
22-EM-010H
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
22-AT-009H
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed on Page 2, follow the repair procedure and perform the diagnosis. If necessary, replace the High Flow electric oil pump (HF EOP) for HF EOP issues or the Dual Clutch Transmission for High Pressure electric oil pump (HP EOP) issues.
22-GI-006H
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
218/231 amend
Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
22-01-054H
Certain Elantra (CN7/CN7a), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles normally equipped with two (2) Smart Key FOBs will receive only one (1) Smart Key FOB and one additional mechanical key, per vehicle, until further notice. A second Smart Key FOB, per vehicle, will be provided at a later date.
22-EM-009H
Certain Elantra (CN7/CN7a), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles normally equipped with two (2) Smart Key FOBs will receive only one (1) Smart Key FOB and one additional mechanical key, per vehicle, until further notice. A second Smart Key FOB, per vehicle, will be provided at a later date.
988DBP
Certain 22-23MY Elantra (CN7/CN7a), Elantra N (CN7 N), and Elantra Hybrid (CN7 HEV) vehicles normally equipped with two (2) Smart Key FOBs will receive only one (1) Smart Key FOB and one additional mechanical key, per vehicle, until further notice.
22-ST-007H
N Vehicles are designed to maximize dynamic steering performance. In normal Ackerman steering geometry, the inner front tire turns more than the outer tire to help cornering in low-speed situations, i.e., parking lot maneuvering or sharp U-turns. N vehicles have a steering geometry optimized for performance driving. The N vehicleâs steering angle difference between the front wheels is reduced to enhance cornering performance. While this helps in high performance driving conditions, it can cause a higher level of tire side scrub that may create a slow shudder or vibration while turning at full steering lock. The feel is similar to turning a 4WD vehicle on dry asphalt when locked in 4WD. This shudder or vibration at parking lot speeds is normal, and no repairs should be performed.
22-01-038H
Some 2022 Elantra (CN7) vehicles may exhibit one or both of the following conditions: ⢠When driving and the vehicle blind spot collision warning alert sound is on; upon reduction of speed below 10 mph, the warning sound does not turn off. ⢠When backing up/moving in reverse and the rear cross traffic collision audible warning sound is on; upon changing the transmission into Drive, the warning sound does not turn off. This bulletin provides the service procedure to update the left and right BCA (Blind-Spot Collision-Avoidance Assist) modules software to resolve the condition(s) stated above.
22-01-027H
Certain Elantra N (CN7 N) vehicles may have been produced with the clutch disc installed in the reverse direction, potentially causing premature wear due to less clearance between the disc and pressure plate. This bulletin outlines the procedures to inspect the clutch disc, and if necessary, repair the condition.
22-01-014H
This bulletin describes the procedure to update wireless CarPlay to alleviate frequent disconnection of wireless CarPlay caused by other wireless noise from unknown sources which could make wireless communication unstable between D-Audio and mobile phone.
21-01-048H
On certain 2021-2022 Elantra vehicles, a coolant leak at the Water Temperature Sensor (WTS) may be observed due to machining burrs at the mounting port of the cylinder head, resulting in improper coolant sealing.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.