Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26-GI-002H TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
DTN DCS
Other
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
Other
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-01-035H TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
26-AD-001H TSB
Service Bulletin/Repair Instructions
Some 2019MY and newer vehicles equipped with a front view camera may illuminate certain warning lights and trigger DTC C272246 fault code for the front camera. In the following cases, the front camera auto-calibration range may be exceeded while driving: • If the front camera is not properly installed and is completely or partially detached. • In case of excessive changes affecting the vehicle's balance (e.g., loading excessively heavy cargo in a specific location of the vehicle, or significant under-inflation of the tires). • Specific road conditions affecting the vehicle's balance (e.g., excessive road crown) This TSB provides instructions on how to service the vehicle when the front camera related warning light(s) are triggered due to system out of calibration (DTC_C272246).
25-BD-012H TSB
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-01-044H TSB
Service Campaign
Some Kona Electric (SX2 EV) vehicles may experience battery drain due to faulty logic keeping the taillights illuminated while the vehicle is parked and turned off. Follow the procedures outlined in this TSB to update the Body Domain Controller (BDC) to the latest software.
25-01-042H TSB
Service Campaign
Certain 2024MY Kona Electric (SX2 EV) and 2023-2024MY IONIQ 5 (NE EV) vehicles are equipped with a Motor and Reduction Gear System, also known as Motor-Gear Driven Unit (MGDU), that may have received an incorrect amount of oil/fluid during manufacturing. In some cases, the motor and/or reduction gear can produce a grinding/whining noise during operation. Follow the procedures in this bulletin to drain the existing oil and replace it with new oil to resolve this condition.
25-BE-002H TSB
Service Bulletin/Repair Instructions
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
25-01-018H-1 TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
25-BE-008H TSB
Service Bulletin/Repair Instructions
Certain vehicles (See Applicable Vehicles List below) equipped with the 12-inch instrument cluster display and separate Instrument Cluster Module require software verification PRIOR to odometer mileage writing. If the Cluster Module does not have the latest software, the incorrect mileage may be written to the new module. This bulletin provides information to confirm the Instrument Cluster Module is equipped with the latest software version prior to using the GDS tablet to write the odometer mileage.
25-01-018H TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
25-01-013H TSB
Service Campaign
Certain Kona Electric (SX2 EV) vehicles may exhibit a dead battery concern linked to the Multimedia Keyboard (MKBD) logic. The MKBD may not enter sleep mode when the vehicle is turned OFF, causing the battery to be drained. Follow the procedure in this TSB to update the software for the MKBD to address this condition.
24-01-094H
Service Campaign
Certain Kona Electric (SX2 EV) vehicles may exhibit a dead battery concern linked to the Multimedia Keyboard (MKBD) logic. The MKBD may not enter sleep mode when the vehicle is turned OFF, causing the battery to be drained. Follow the procedure in this TSB to update the software for the MKBD to address this condition.
24-01-051H-1 OL
Service Campaign
Certain Hyundai Electric vehicles may exhibit a condition of an interrupted charging session or a lower charging speed while charging with a 240V AC (Level 2) charger. This occurs to prevent potential damage to the charging cable connection.
24-BE-013H
Service Bulletin/Repair Instructions
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Connected Car Service (CCS) functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.
24-01-051H-1
Service Campaign
Certain 2022-2024MY IONIQ 5 (NE1), 2023-2024MY IONIQ 6 (CE1) and 2024-2025MY Kona Electric (SX2 EV) vehicles may exhibit a condition while charging with a 240V AC (Level 2) charger where the vehicle experiences an interrupted charging session or a lower charging speed. This occurs to prevent potential damage to the charging cable connection. Follow the procedure in this TSB to update the software logic for the Vehicle Charging Management System (VCMS), which initiates a self-restart that allows the vehicle charging to return to full capacity once stabilized.
24-BD-001H
Service Bulletin/Repair Instructions
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.