Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26-BD-005H TSB
Some Santa Fe Hybrid (MX5A HEV) vehicles may have walk-in switches that are not fully secured. This bulletin provides instructions to trim the seat cover and replace the walk-in switch with improved parts.
26-BE-026H TSB
Some Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may exhibit a 12-volt battery drain due to the passive entry feature of the Digital Key 2 premium causing repeated wakeup of the vehicle. This bulletin provides instructions to perform software updates for the Ultra-Wide Band (UWB) and Body Domain Control (BDC) modules.
26-BD-008H TSB
Some Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles equipped with natural leather or Nappa leather seating surfaces may exhibit wrinkling on the first or second row seat cushions or seat backs, or tearing along the perforation holes due to the stiffness of the leather material. This bulletin provides instructions to replace the wrinkled or torn seat covers.
26-BE-015H TSB
Some Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles equipped with power seats with or without Integrated Memory System (IMS) may produce buzz, squeak, rattle noises when the driver’s front seat is adjusted forward or backwards due to friction within the motor’s tube. This bulletin provides instructions to remove the motor tube.
26-GI-002H TSB
This bulletin provides information related to the navigation and head unit software changes introduced in the 2026 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2026 1st Navigation Map and Software Update Key Improvements and Additional Improvements tables in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB.
DTN DCS
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-01-035H TSB
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
26-BD-001H TSB
Some Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles equipped with 2nd row captain’s chairs have an armrest cap that may detach. This bulletin provides the procedure to replace the armrest cap on the 2nd row captain’s chairs with a revised part.
26-01-016H-1 TSB
Certain Santa Fe Hybrid (MX5A HEV) vehicles may experience a discharged battery condition due to the Fingerprint Module (FPM) not entering 'SLEEP' mode when the ignition is turned off. This bulletin provides instructions to perform a software update with revised logic for the FPM.
26-01-016H TSB
Certain Santa Fe Hybrid (MX5A HEV) vehicles may experience a discharged battery condition due to the Fingerprint Module (FPM) not entering 'SLEEP' mode when the ignition is turned off. This bulletin provides instructions to perform a software update with revised logic for the FPM.
LA6 & LA6A DCS
Certain Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may experience a discharged battery condition due to the Fingerprint Module (FPM) not entering 'SLEEP' mode when the ignition is turned off. Technical Service Bulletins (TSBs) 26-01-015H and 26-01-016H provide instructions to perform a software update with revised logic for the FPM. *Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required. Deployment of the OTA to Bluelink customers is planned starting the week of 02/16/2026.
LA1/LA1A DCS
Certain Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may experience battery drain and inoperative heated seat capacitive touch buttons due to incorrect ECU logic for the Seat Heater Unit – Front (SHU_FRT). Technical Service Bulletins (TSBs) 25-01-025H-1 and 25-01-028H-1 provides instructions to perform a software update for the Seat Heater Unit – Front to correct the logic. Over-the-Air (OTA): This update can also be conducted via OTA. The customer can complete on his/her own if he/she has an active subscription to Hyundai Bluelink. A visit to the dealership is not required. Deployment of the OTA to Bluelink customers is planned to start the week of 11/11/25.
25-BD-012H TSB
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-01-058H OL
Hyundai has become aware that some vehicles may exhibit a “pop,” “tick,” or “creak” noise from the right front subframe area while driving. The noise may be caused by a missing weld on the right front subframe mounting stud.
25-BE-020H TSB
This bulletin provides information related to the changes introduced in the 2025 1st Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system as described in this TSB.
25-01-058H DN
Certain Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may produce a “pop”, “tick”, or “creak” noise from a missing weld on the mounting stud of the right front subframe while driving. The vehicle’s structural integrity is maintained even with a missing weld; however, drivers may report an abnormal noise coming from the affected area during certain driving scenarios.
25-01-058H TSB
Certain Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may produce a “pop”, “tick”, or “creak” noise from a missing weld on the mounting stud of the right front subframe while driving. The vehicle’s structural integrity is maintained even with a missing weld; however, drivers may report an abnormal noise coming from the affected area during certain driving scenarios. This bulletin describes the procedure to inspect, and if necessary, repair the missing weld on the mounting stud to eliminate the noise.
25-BE-002H TSB
This bulletin provides information related to the changes introduced in the 2024 2nd Navigation Map and Software Update. The changes may vary depending on vehicle type, model, and navigation system. Refer to the 2024 2nd Navigation Map and Software Update Improvements section in this TSB for a list of specific changes. The software can be downloaded via Navigation Updater (NAU) and updated by USB. The NAU website is https://update.hyundai.com/US/EN/navigationUpdate. For certain models equipped with a relevant Bluelink package, the software may be downloaded and applied via OTA update.
25-01-018H-1 TSB
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
25-01-028H TSB
Certain Santa Fe Hybrid (MX5A HEV) vehicles may experience battery drain due to incorrect ECU logic for the Seat Heater Unit – Front (SHU_FRT). This bulletin provides instructions to perform a software update for the Seat Heater Unit – Front to correct the logic.
25-BE-008H TSB
Certain vehicles (See Applicable Vehicles List below) equipped with the 12-inch instrument cluster display and separate Instrument Cluster Module require software verification PRIOR to odometer mileage writing. If the Cluster Module does not have the latest software, the incorrect mileage may be written to the new module. This bulletin provides information to confirm the Instrument Cluster Module is equipped with the latest software version prior to using the GDS tablet to write the odometer mileage.
25-01-018H TSB
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to verify Bluelink Data Communication Unit (DCU) network connection and if needed, reset the DCU in Dealer Mode to resolve the connection.
25-BE-003H DN
Hyundai Motor America has noted that several vehicles were impacted by a telecommunications outage that occurred on Sunday, February 9th , resulting in the potential loss of connectivity or interruptions when attempting to use Bluelink functions. Voice Recognition, Sports Media, and Weather will not be available. Dealer stock and retailed vehicles are both affected. If a customer calls in and their vehicle is experiencing issues related to Bluelink, please have them come into the dealership to assist with resetting the Bluelink Data Communication Unit (DCU) and utilize TSB 25-BE-003H posted on Hyundai Tech Info.
25-BE-003H TSB
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink functions. This may be due to an occasional disconnection on Verizon’s communication network. Follow the procedures in this bulletin to reset the Connected Car Data Communication Unit (DCU) in Dealer Mode to resolve the connection.
24-01-092H-1
Certain 2025MY Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may have a Bluelink malfunction or not able to have Bluelink setup. This bulletin provides instructions to reset the network in Dealer Mode to prevent the Data Concentrator Unit (DCU) modem from experiencing a "Blue Link Not Open" error.
24-01-092H TSB
Certain 2025MY Santa Fe (MX5A) and Santa Fe Hybrid (MX5A HEV) vehicles may have a Bluelink malfunction or not able to have Bluelink setup. This bulletin provides instructions to reset the network in Dealer Mode to prevent the Data Concentrator Unit (DCU) modem from experiencing a "Blue Link Not Open" error.
24-BE-007H-1
Certain Santa Cruz (NXT), Santa Fe (MX5A), Santa Fe Hybrid (MX5A HEV), and Tucson (NX4A) vehicles may exhibit a display screen flickering or intermittently going blank. This may be due to the shield width of the coaxial cable being too wide, causing a loose connection. Follow the procedures in this bulletin to adjust the width of the shield using a supplied shield adjustment jig.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.