Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
DTN DCS
Other
The National Highway Traffic Safety Administration (NHTSA) has issued an urgent safety advisory regarding dangerous, counterfeit driver‑side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN), that have been identified in U.S. vehicles following prior crashes, theft, or non‑certified airbag replacements. These inflators are not approved for use, may rupture during deployment, and have caused serious injuries and fatalities. Please see attached announcement, provided by NHTSA, for more details.
DTN DL
Other
The National Highway Traffic Safety Administration (NHTSA) has identified the presence of substandard and dangerous driver’s-side airbag inflators manufactured by Jilin Province Detiannuo Automobile Safety System Co., Ltd. (DTN). These inflators were not supplied, approved, or authorized by the vehicle manufacturers and have primarily been found in vehicles that previously experienced a crash and underwent airbag replacement using non-genuine parts. These dangerous inflators have ruptured during deployment, posing a serious risk of injury or death due to metal fragments entering the vehicle cabin. To date, Hyundai is aware of three people who have died while driving a Hyundai vehicle with one of these substandard replacement airbag inflators that deployed in what likely would have been a survivable crash. NHTSA has issued a public advisory urging vehicle owners and service professionals to have vehicles inspected if there is reason to believe that a non-genuine replacement airbag may have been installed. Vehicles with salvage or rebuilt titles, prior airbag deployments, or unknown repair histories may present a higher risk. NHTSA strongly cautions against self-inspection by vehicle owners and recommends inspection by trained technicians.
26-01-033H DN
Warranty Program/Extension
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.
26-01-033H TSB
Warranty Program/Extension
This TSB references the Op codes to use for claim submission and the Parts required based on the vehicle’s inspection results from TSB 22-01-023H-2 (DTC P1326 – Engine Bearing Inspection/Engine Replacement) or the latest version.
P33 OL
Other
In response to this trend, we engineered a software upgrade that addresses the social media theft method and made it available to owners of eligible models free of charge at authorized Hyundai dealers since early 2023. In addition to the anti-theft software, we’ve developed a new zinc-reinforced ignition cylinder protector hardware upgrade that can be installed at the ignition cylinder location to provide additional protection against the social media theft method. Because your Hyundai vehicle with the VIN listed above (“Subject Vehicle”) was not factory-equipped with an engine immobilizer and was previously eligible for the software upgrade, you are now eligible until March 31, 2027 to have the ignition cylinder protector installed — if you request it — at no cost to you through an authorized Hyundai dealership.
25-01-089H DCS
Other
Upon customer's request ONLY, the Technical Service Bulletin (TSB) 25-01-089H provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows. This repair procedure is being provided in addition to the previous Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1).
25-01-089H DN
Other
In addition to the Anti-Theft software provided under Service Campaign 993 (TSB 24-01-009H-1), a zinc reinforced ignition cylinder protector hardware upgrade is being made available to customers upon request. This supplemental security measure is to be installed at the ignition switch location and provides additional protection against the social media theft method. Vehicles not equipped with an immobilizer during production at the factory are eligible. The repair procedure shall be performed and claimed upon customer request only. Any future repairs to these vehicles in which an installed ignition cylinder protector impacts required parts and/or labor, shall be covered by HMA. Please see TSB 25-01-089H for details.
25-01-089H TSB
Other
This bulletin provides the service procedure for installation of a key cylinder reinforcement protector assembly and two anti-theft decals on the front windows.
25-BD-012H TSB
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
25-01-024H-1 TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
25-01-024H EM
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon's communication network. If you are experiencing issues with remote commands, or other Bluelink services, please see the instructions below to reestablish the connection via the AVN pinhole reset method.
25-01-024H TSB
Service Campaign
Some vehicles may exhibit a loss of connectivity or interruptions in the middle of using Bluelink Service functions. This may be due to an irregular disconnection on Verizon’s communication network. Follow the procedure in this TSB to reestablish the connection via the AVN pinhole reset method.
TXXQ OL
Warranty Program/Extension
Certain 2018 – 2019 model year Accent and certain 2016 – 2017 model year Tucson vehicles may display various Diagnostic Trouble Codes (DTC) related to the Airbag Control Unit (ACU), which may cause the airbag warning light to illuminate. At Hyundai, we are committed to providing vehicles of outstanding quality and value. In an effort to meet this commitment, Hyundai is extending the warranty coverage for the ACU under this condition to 15 years with unlimited mileage from the date of original retail delivery or date of first use and is valid for original and subsequent owners.
24-BE-014H DBP
Warranty Program/Extension
Certain 2018-2020MY Accent (HC) and 2016-2018MY Tucson (TL) vehicles may experience inoperable Airbag Control Unit (ACU) and have Diagnostic Trouble Code (DTC) stored in the ECM. Hyundai is extending warranty coverage for the airbag control unit (ACU) under this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
24-BE-014H TSB
Warranty Program/Extension
Certain 2018-2019MY Accent (HC) and 2016-2017MY Tucson (TL) vehicles may experience inoperable Airbag Control Unit (ACU) and have Diagnostic Trouble Code (DTC) stored in the ECM. Hyundai is extending warranty coverage for the airbag control unit (ACU) under this condition to 15 years/unlimited mileage from the date of original retail delivery or date of first use (whichever occurs first) and is valid for original and subsequent owners.
24-01-050H-1
Service Campaign
This bulletin provides instructions to update the 4th generation AVN head unit software to ensure the SIM Over The Air function for the Bluelink service is operating properly.
24-01-068H
Service Campaign
Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
24-01-050H
Service Bulletin/Repair Instructions
This bulletin provides instructions to update the 4th generation AVN head unit software to ensure the SIM Over The Air function for the Bluelink service is operating properly.
24-01-009H-1
Service Campaign
A class settlement against Hyundai Motor America (“HMA”) that had alleged that certain 2011 – 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the “Class Vehicles”) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional “turn-key-to-start” ignition systems.
24-AT-002H
Service Bulletin/Repair Instructions
This TSB provides a procedure to diagnose and replace, if necessary, an automatic transmission with Incorrect Ratio DTC (transmission clutch slip in gear above limit) listed on Page 2.
24-EM-002H
Service Bulletin/Repair Instructions
Certain 2016-2021MY Tucson (TL) 2.0L vehicles may experience continued DTC P1326 after the ECU update has been performed per TSB 22-01-028H-1 (or later) âENGINE MONITORING LOGIC (SERVICE CAMPAIGN 966)â.
24-BD-001H
Service Bulletin/Repair Instructions
This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
24-01-009H
Service Bulletin/Repair Instructions
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
23-01-014H-6
Service Bulletin/Repair Instructions
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
23-01-014H-5
Service Bulletin/Repair Instructions
Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
23-EM-005H
Service Bulletin/Repair Instructions
This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
23-BE-010H
Service Bulletin/Repair Instructions
Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
22-01-023H-2
Service Bulletin/Repair Instructions
A class action lawsuit against Hyundai Motor America (âHMAâ) alleges that certain Hyundai vehicles (âClass Vehiclesâ) were manufactured, marketed, sold, and/or leased with an engine defect that can result in sudden engine seizure, stalling, engine failure, and in some circumstances, engine fire, and that some owners and lessees of Class Vehicles have been improperly denied repairs under warranty. Neither HMA nor Hyundai Motor Company have been found liable for any of the claims alleged in the lawsuit. The parties have instead reached a voluntary settlement (the âSettlementâ) to avoid lengthy litigation and to provide owners of Class Vehicles certain benefits.
23-01-014H-4
Service Bulletin/Repair Instructions
Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
23-BD-007H
Service Bulletin/Repair Instructions
Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
23-01-014H-3
Service Bulletin/Repair Instructions
Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
23-BD-002H
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
22-EM-010H
Service Bulletin/Repair Instructions
Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
22-GI-006H
Service Bulletin/Repair Instructions
Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
22-AT-007H
Service Bulletin/Repair Instructions
Certain vehicles (listed below) equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing clutch judder, updating the Transmission Control Unit (TCU) with revised logic, and/or replacing the Double Clutch.
22-01-023H-1
Service Bulletin/Repair Instructions
Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
22-01-028H-1
Service Bulletin/Repair Instructions
Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
22-EM-006H-1
Service Bulletin/Repair Instructions
The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
DBP966
Service Bulletin/Repair Instructions
Hyundai is conducting a service campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
DBPT6G
Service Bulletin/Repair Instructions
Certain vehicles that have completed Service Campaign 966 may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
22-01-033H
Service Bulletin/Repair Instructions
Applicable vehicles with 2.0L T-GDI and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC P1326 and/or engine may exhibit Abnormal Noise or No Crank/No Start condition. Follow the procedure to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results.
22-EM-001H-1
Service Bulletin/Repair Instructions
The warranty coverage for engine long block repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to a Limited Lifetime Warranty and is valid for original and subsequent owners.
22-EM-002H-1
Service Bulletin/Repair Instructions
The warranty coverage for engine long block repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first. Warranty coverage is valid for original and subsequent owners.
22-01-023H
Service Bulletin/Repair Instructions
Certain vehicles listed below may experience the Check Engine warning lamp illuminated with DTC P1326 and/or an engine concern/noise related to connecting rod bearing wear or damage. Follow the procedure to inspect the vehicle and replace the engine and/or update the engine ECU software (if new ROM is available) based on the inspection results.
22-01-028H
Service Bulletin/Repair Instructions
Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
22-EM-001H
Service Bulletin/Repair Instructions
The warranty coverage for engine long block repair or replacement regarding engine damage or malfunction from connecting rod bearing wear has been extended to a Limited Lifetime Warranty and is valid for original and subsequent owners.
21-01-023H-4
Service Bulletin/Repair Instructions
Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
21-01-080H
Service Bulletin/Repair Instructions
When asked to provide the Modem Information, the Universal Subscriber Identity Module (USIM) information is not available. This bulletin describes the 3-part Software to correct this condition and activate Blue Link Services.
DBP972
Service Bulletin/Repair Instructions
When asked to provide the Modem Information, the Universal Subscriber Identity Module (USIM) may not be available. This TSB# 21-01-080H describes the 3-part software to correct this condition and activate Blue Link Services.
21-01-066H
Service Bulletin/Repair Instructions
Applicable vehicles with 2.0L T-GDI and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC P1326 and/or engine may exhibit Abnormal Noise or No Crank/No Start condition. Follow the procedure to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results.
T3GDBP20211103
Service Bulletin/Repair Instructions
Hyundai has launched a Service Campaign for applicable vehicles with 2.0L Turbo and 2.4L GDI engines that may experience the Check Engine warning lamp illuminated with DTC P1326.
21-EM-005H-1
Service Bulletin/Repair Instructions
The Powertrain warranty coverage for certain engine repairs and/or replacement where the engine damage or malfunction is related to connecting rod bearing wear, has been extended to 15 years or 150,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
21-01-023H-3
Service Bulletin/Repair Instructions
Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
21-AT-014H
Service Bulletin/Repair Instructions
Certain vehicles (listed below) equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing clutch judder, updating the Transmission Control Unit (TCU) with revised logic, and/or replacing the Double Clutch.
21-BD-006H
Service Bulletin/Repair Instructions
Certain Elantra (AD/ADa) and Tucson (TL) vehicles may experience an internal or external door handle being inoperative or requiring repeated attempts to open the door. If this condition occurs, replace the affected door latch. The warranty coverage for the door latch has been extended to 10 years (unlimited mileage) from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
21-EM-004H
Service Bulletin/Repair Instructions
This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
21-BR-002H
Service Bulletin/Repair Instructions
This bulletin provides best practice recommendations when performing brake service procedures.
21-EM-003H
Service Bulletin/Repair Instructions
This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
21-AT-005H
Service Bulletin/Repair Instructions
This bulletin provides service information for a vehicle that exhibits DTC P0507 âIdle Speed Control (ISC) System â RPM Higher than expectedâ.
20-BR-002H
Service Bulletin/Repair Instructions
This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
20-SS-004H
Service Bulletin/Repair Instructions
This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the âTire Balance Data Sheetâ must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
20-AT-025H
Service Bulletin/Repair Instructions
This bulletin provides the procedure to update the TCU for vehicles that may exhibit a hesitation at acceleration particularly from a rolling stop condition. This update optimizes the TCU torque control logic.
20-ST-001H-2
Service Bulletin/Repair Instructions
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
20-ST-001H-1
Service Bulletin/Repair Instructions
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
20-BD-014H
Service Bulletin/Repair Instructions
This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
20-BE-008H
Service Bulletin/Repair Instructions
This bulletin provides information for new software to update the Navigation and Display Audio system to include the Apple CarPlay and Android Auto feature. This bulletin describes how to transfer the update software to a storage drive (USB or SD Card) and perform the software installation into the audio system.
20-AT-017H
Service Bulletin/Repair Instructions
If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. ï· Check Engine light on ï· DTC P0880/P088000 - TCM Power signal error open/short ï· Transmission stuck in 4th gear fail-safe ï· Harsh shift into Reverse and Drive
DCT Dealer Best
Service Bulletin/Repair Instructions
An informational brochure about the Dual Clutch Transmission was sent to Class Members of 2015-2017 model year Sonata Eco vehicles, 2016-2017 model year Tucson vehicles, and 2016-2017 model year Veloster vehicles equipped with a Dual Clutch Transmission.
20-SS-002H(1)
Service Bulletin/Repair Instructions
This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
20-BD-007H-1
Service Bulletin/Repair Instructions
This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
20-EE-003H
Service Bulletin/Repair Instructions
This bulletin provides information on identifying dealer stock vehicles with either: ⢠A Battery SOC alert - low Battery State of Charge (SOC) at or below 50%. ⢠A 30 Day alert - vehicle has not started and reported an SOC in 30 days.
20-AT-016H
Service Bulletin/Repair Instructions
The automatic transmission warranty repair policy authorizes in-dealership repairs of the following components for both OEM (new) and remanufactured automatic transmissions:
20-AT-014H
Service Bulletin/Repair Instructions
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
20-AT-011H
Service Bulletin/Repair Instructions
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
20-BD-007H
Service Bulletin/Repair Instructions
This bulletin describes the general guidelines to disinfect and protect vehicle interior surfaces using certain safe chemical products.
Campaign T3G DBP
Service Bulletin/Repair Instructions
Applicable vehicles with 2.0L Turbo and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC P1326. Follow the procedures on TSB #20-01-004H (supersedes TSB #19-01-006H-4) rotate the crankshaft, perform the bearing inspection (if crankshaft does rotate) and/or replace the engine based on the crankshaft/bearing inspection results.
20-AT-008H
Service Bulletin/Repair Instructions
If you are servicing an applicable vehicle with a âCheck Engineâ light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness.
20-01-004H - The
Service Bulletin/Repair Instructions
Applicable vehicles with 2.0L Turbo and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC P1326. Follow the procedure to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results.
20-01-006H
Service Bulletin/Repair Instructions
Hyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound on certain vehicles, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Campaign 953 Dea
Service Bulletin/Repair Instructions
Hyundai has developed a new engine monitoring technology called a Knock Sensor Detection System (KSDS). The technology uses software innovations and leverages existing engine sensors to continuously monitor for symptoms that may precede an engine failure. Watch this video to learn more. The KSDS software continuously monitors engine vibrations for unusual patterns that develop as an engine connecting rod bearing wears abnormally that could later cause engine seizure. If vibrations caused by bearing wear start to occur, the malfunction indicator lamp will blink continuously, an audible chime will sound and the vehicle will be placed in a temporary engine protection mode with reduced power and acceleration. At that time, Diagnostic Trouble Code (DTC) P1326 will be recorded in the ECM. In addition, Hyundai will extend the warranty to 10 years and 120,000 miles (up from 100,000 miles) for original and subsequent owners of the covered vehicles for engine repairs needed because of excessive connecting rod bearing damage.
20-SS-001H
Service Bulletin/Repair Instructions
This bulletin describes the requirements for all wheel alignment and/or vehicle tracking claims and best practices when diagnosing and conducting alignment-related repairs for all models and model years.
20-BE-001H
Service Bulletin/Repair Instructions
This bulletin provides guidelines to inspect the USB, head unit, and multi-box for common connection conditions. 2. This bulletin presents guidelines to inspect for common Android Auto and Apple CarPlay connection conditions. 3. This bulletin provides physical differences between the USB 2.0 port and USB 3.0 port.
20-ST-001H
Service Bulletin/Repair Instructions
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
20-AT-001H
Service Bulletin/Repair Instructions
This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-AT-021H-1
Service Bulletin/Repair Instructions
If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. ? PASS: Stall speed is between 1700~2900 rpm (See shop manual for stall speed). ? FAIL: Engine revs to redline limit (6,000~6,500 rpm). If so, replace the transmission.
19-AT-024H
Service Bulletin/Repair Instructions
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ?P0705 - Range switch sensor circuit ?P0706 - Range switch range/performance ?P0707 - Range switch - open circuit ?P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ?Malfunction Indicator Light (MIL) illuminated ?4th gear fail-safe ?No gear indication in cluster ?Intermittent no engine crank/no start in ?P? or ?N? with or without MIL or DTC.
19-BE-011H-1
Service Bulletin/Repair Instructions
The Blind Spot Detection (BSD) or Blind-Spot Collision Warning (BCW) is a system that measures the speed of and distance from the following vehicles by using two magnetic wave radar sensors attached in the rear bumper. The BSD/BCW detects vehicles within the blind spot zone and gives off an alarm (visual and audible). The two magnetic radar sensors provide these functions for BSD/BCW: ? Senses other vehicles in the BSD/BCW zone and turns on the BSD/BCW warning lamp for the driver. The warning lamp starts blinking, along with an audible sound, when the driver turns on the turn signal lamp to enter the lane where another vehicle is driving.
19-BE-015H-1
Service Bulletin/Repair Instructions
This bulletin contains information regarding the clock display on certain Navigation (AVN 4.0) head units. This procedure is specifically for the clock date and time not displaying which started appearing around August 17, 2019. Other similar concerns which were opened before this date are a different root cause and will not be resolved by this information. An example of the clock concern is shown in the screenshot below:
19-GI-006H
Service Bulletin/Repair Instructions
This bulletin provides instruction detailing the proper methodology for scanning and uploading captured GDS data files to the Techline Repository. Compliance with this bulletin ensures that the GDS data files are correctly transferred and matched with a Techline Case number.
19-BD-007H
Service Bulletin/Repair Instructions
The warranty coverage for the panoramic sunroof moving glass has been extended to 10 years or 120,000 miles from the date of original retail delivery or date of first use, whichever occurs first, and is valid for original and subsequent owners.
19-AT-015H
Service Bulletin/Repair Instructions
If you are servicing an applicable vehicle with a ?Check Engine? light on and one or more of the DTC listed below, follow the repair procedure and replace the related solenoid and oil pressure harness
19-EE-001H-1
Service Bulletin/Repair Instructions
This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Intl. (KBI).
19-AT-012H
Service Bulletin/Repair Instructions
This TSB provides a procedure to diagnose and repair a transaxle for the following Incorrect Ratio DTC (transaxle clutch slipping more than 200 rpm in gear).
19-BE-009H
Service Bulletin/Repair Instructions
This bulletin provides information for troubleshooting of the Blind-Spot Collision Warning (BCW/BSD) system whenever it exhibits Diagnostic Trouble Code (DTC) C120B/D or C160A.
19-01-010H
Service Bulletin/Repair Instructions
Some subject vehicles may experience the illumination of various warning lamps including the brake warning lamp and other lamps. This bulletin describes the procedure to apply sealant to the vacuum pump or replace the vacuum pump cap based on vehicle inspection.
Campaign T3C TL
Service Bulletin/Repair Instructions
Hyundai has launched a Service Campaign to inspect and repair or replace the vacuum pump cap on certain Tucson (TL) vehicles.
19-ST-001H
Service Bulletin/Repair Instructions
This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
19-HA-001H
Service Bulletin/Repair Instructions
This bulletin provides additional service diagnostic information and repair procedures related to electric A/C compressors equipped in hybrid electric vehicles, plug-in hybrid electric vehicles, and electric vehicles.
19-FL-003H
Service Bulletin/Repair Instructions
This bulletin provides the procedure to write the Vehicle Identification Number (VIN) during the replacement of the Engine Control Module (ECM) or Powertrain Control Module (PCM). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
19-BE-004H
Service Bulletin/Repair Instructions
This bulletin provides information on the serviceable parts for the outside mirror assembly. When diagnosing and repairing the outside mirror, do not replace the entire assembly. Refer to page 2 of this TSB for replacement of individual parts.
19-AT-002H
Service Bulletin/Repair Instructions
Certain vehicles (listed below) equipped with 7-speed Dual Clutch Transmission (DCT) may exhibit an abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing and replacing the Double Clutch, including a Transmission Control Unit (TCU) software update.
5NP-M7Z5K-02
Service Bulletin/Repair Instructions
This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Inc. (KBI).
5NP-Z3A5R-02
Service Bulletin/Repair Instructions
This bulletin provides the procedure to update the TCU (Transmission Control Unit) in certain vehicles (listed Below) when replacing the Dual Clutch Transmission (DCT) with updated clutch material. This bulletin also provides a method of identifying transmissions with the updated F850 clutch material.
5NP-S6S9Z-12
Service Bulletin/Repair Instructions
This bulletin provides information related to a BMS (Battery Management System) ECU software update that must be performed after replacing a high voltage Lithium Battery in a Sonata HEV (YF HEV) or Tucson Fuel Cell Electric Vehicle (LM FCEV).
5NP-A3B3W-10
Service Bulletin/Repair Instructions
Hyundai Motor America is conducting a Service Campaign to inspect and (if necessary) replace the vacuum pump cap on certain 2016-17 Tucson vehicles. Service Campaign T3C provides a service procedure to inspect and/or replace the vacuum pump cap.
5NP-D3P4H-10
Service Bulletin/Repair Instructions
On some Tucson (TL) vehicles may experience the illumination of various warning lamps including the brake warning lamp and other lamps. This bulletin describes the procedure to apply sealant to the vacuum pump or replace the vacuum pump cap based on vehicle inspection.
5NP-X9G4F-09
Service Bulletin/Repair Instructions
This bulletin describes the proper steps to identify and correct a symptom with a "Subscription Updated" or "Loading" pop-up message shown (intermittently) after every Head Unit boot up.
5NP-F6W6P-05
Service Bulletin/Repair Instructions
The shift lever on some 6-speed vehicles may intermittently not shift out of Park. This bulletin provides the diagnostic procedures to correct this condition.
5NP-Q5T3B-05
Service Bulletin/Repair Instructions
This bulletin provides information related to the FCU (Fuel Cell Control Unit) software update for TUCSON FCEV (LM FCEV) vehicles. This update includes improvement for fuel cell stack durability and diagnosis condition.
5NP-P5L7D-05
Service Bulletin/Repair Instructions
If you are servicing a vehicle with a harsh and/or delayed shift, use the GDS as shown in the Service Procedure to measure shift engagement time.
5NP-K3U7J-05
Service Bulletin/Repair Instructions
This bulletin provides information to replace the A/C Evaporator Temperature Sensor and to update the HVAC ECU on certain 2016-2017 model year Tucson (TL) vehicles.
5NP-T6W2Z-03
Service Bulletin/Repair Instructions
This bulletin provides information to replace the A/C Evaporator Temperature Sensor and to update the HVAC ECU on certain 2016-2017 model year Tucson (TL) vehicles.
5NP-D8E5P-03
Service Bulletin/Repair Instructions
Hyundai Motor America is conducting a Service Campaign to replace the evaporator temperature sensor and update the ECM software on certain 2016-17MY Tucson vehicles. Service Campaign T2U provides a service procedure to replace the evaporator temperature sensor and update the ECM software.
5NP-C5J4H-01
Service Bulletin/Repair Instructions
This bulletin describes the procedure to determine if the vehicle's head unit needs to be replaced as a result of a defect causing an echo when a phone call is answered via Apple CarPlay.
5NP-G8S6L-01
Service Bulletin/Repair Instructions
This bulletin describes the procedure to determine if the vehicle's navigation unit needs to be replaced as a result of the inability to set the clock or view it on the top of the screen.
5NP-Z6F3A-11
Service Bulletin/Repair Instructions
Before installing an automatic transmission, check the depth of the torque converter in the case to confirm the torque converter is fully installed in the transmission. If this is not done, the oil pump may be damaged.
5NP-K9M7J-10
Service Bulletin/Repair Instructions
Due to parts communization, the rear trailing arms on (TL) Tucsons produced after July 26, 2016 have been revised. This change also affects service parts. Therefore, anytime a rear trailing arm is replaced on (TL) Tucsons produced on or before July 26, 2016 it is necessary to replace both sides. Refer to the repair procedure located in the applicable Service Shop Manual: Suspension System - Rear Suspension System- Trailing Arm - Repair Procedures.
5NP-Y8D3S-10
Service Bulletin/Repair Instructions
On certain 2016 - 2017 MY Tucson (TL), intermittently there is no sound from the audio system. This is caused by the instrument cluster not sending the proper CAN signals to the amplifier. This bulletin describes the procedure to reprogram the instrument cluster to correct the signal transmission timing.
5NP-E2C3Q-09
Service Bulletin/Repair Instructions
This bulletin provides information on how to return a Hyundai HEV/PHEV/EV/Fuel Cell Lithium Battery for proper disposal and safe environmental recycling using Hyundai?s authorized vendor Kinsbursky Brothers Inc. (KBI).
5NP-V3F8T-09
Service Bulletin/Repair Instructions
If you are servicing a vehicle with the DTC or symptoms listed below, refer to the Service Procedure to diagnose the condition. ? Diagnostic trouble codes: ? P0705 - Range switch sensor circuit ? P0706 - Range switch range/performance ? P0707 - Range switch - open circuit ? P0708 - Range switch - short circuit or multiple inputs ? Symptoms: ? Malfunction Indicator Light (MIL) illuminated ? 4th gear fail-safe ? No gear indication in cluster ? Intermittent no engine crank/no start in ?P? or ?N? with or without MIL or DTC.
5NP-B6N5A-04
Service Bulletin/Repair Instructions
This bulletin provides the procedure to update both the ECM (Engine Control Module) and the TCM (Transmission Control Module) on some 2016 and 2017 Hyundai Tucsons equipped with a 7-speed EcoShift® Dual Clutch Transmission (DCT). The update will address: ? A slight hesitation at low speeds that can be experienced in certain driving conditions. This update improves the low speed engine and transmission response. ? Malfunction indicator light illuminated with DTC P0128 - Coolant Thermostat - Coolant Temp Below Thermostat Regulating Temperature.
5NP-D8L3J-01
Service Bulletin/Repair Instructions
THE 2017 SANTA FE (NC) AND 2016 2017 TUCSON (TL) ARE AVAILABLE WITH A GENUINE HYUNDAI TRAILER HITCH AND WIRING HARNESS. ON CERTAIN UNITS, WHEN THE TRAILERS LIGHTING WIRING HARNESS IS CONNECTED TO THE VEHICLE, THE TOW HITCH MODULE MAY MALFUNCTION RESULTING IN CONTINUOUS ILLUMINATION OF THE TRAILERS BRAKE AND/OR TURN SIGNAL BULB(S). THIS CONDITION AFFECTS ONLY THE TRAILERS LIGHTING; NOT THE VEHICLES. IF A VEHICLE EQUIPPED WITH THE GENUINE HYUNDAI ACCESSORY TOW PACKAGE IS DRIVEN WITH A TRAILER, IT IS POSSIBLE THAT THE TRAILER LIGHTS WOULD BE UNABLE TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARDS. A FAILURE TO NOTIFY OTHER VEHICLES OF THE DRIVERS INTENT COULD POTENTIALLY INCREASE THE RISK OF A CRASH.
5NP-P8N9N-12
Service Bulletin/Repair Instructions
Hyundai Motor America is conducting a Service Campaign to update both the ECM (Engine Control Module) and the TCM (Transmission Control Module) on certain 2016-17MY Model Year Tucson equipped with DCT. Service Campaign T1B provides a procedure to update the ECM and TCM.
5NP-P9A3V-12
Service Bulletin/Repair Instructions
Eco, Sport, and Limited trim 2016 Hyundai Tucsons are equipped with a 7-speed EcoShift® Dual Clutch Transmission (DCT). In specific operating conditions, the transmission clutch application logic can result in a delayed engagement when accelerating from a stop. If the accelerator pedal is steadily depressed for approximately 1.5 to 2 seconds, the vehicle will begin to accelerate and normal driving is resumed. However, if the accelerator pedal is repeatedly cycled, the vehicle will not accelerate. The inability to move the vehicle in traffic may increase the risk of a crash. Also accompanying with the software are updates for the following: ? A slight hesitation at low speeds that can be experienced in certain driving conditions. This update improves the low speed engine and transmission response. ? Malfunction indicator light illuminated with DTC P0128 - Coolant Thermostat - Coolant Temp Below Thermostat Regulating Temperature.
5NP-R6T4X-12
Service Bulletin/Repair Instructions
Hyundai Motor America conducted Recall 149 to update the DCT Control Logic on certain 2016 Model Year Tucson 1.6L vehicles. Recall 149 (16-01-038-01) provides an updated procedure to update the TCU and ECM software. Hyundai Motor America is conducting a revision to Recall to update both the TCU and ECM.
5NP-X7Y4J-12
Service Bulletin/Repair Instructions
This bulletin provides the procedure to update both the ECM (Engine Control Module) and the TCM (Transmission Control Module) on some 2016 and 2017 Hyundai Tucsons equipped with a 7-speed EcoShift® Dual Clutch Transmission (DCT). The update will address: ? A slight hesitation at low speeds that can be experienced in certain driving conditions. This update improves the low speed engine and transmission response. ? Malfunction indicator light illuminated with DTC P0128 - Coolant Thermostat - Coolant Temp Below Thermostat Regulating Temperature.
5NP-N5Z7L-10
Service Bulletin/Repair Instructions
EFFECTIVE SEPT. 10, 2016 THE FOLLOWING SERVICE CAMPAIGN WILL END.
5NP-X7J3D-10
Service Bulletin/Repair Instructions
ECO, SPORT, AND LIMITED TRIM 2016 HYUNDAI TUCSONS ARE EQUIPPED WITH A 7-SPEED ECOSHIFT® DUAL CLUTCH TRANSMISSION (DCT). IN SPECIFIC OPERATING CONDITIONS, THE TRANSMISSION CLUTCH APPLICATION LOGIC CAN RESULT IN A DELAYED ENGAGEMENT WHEN ACCELERATING FROM A STOP. IF THE ACCELERATOR PEDAL IS STEADILY DEPRESSED FOR APPROXIMATELY 1.5 TO 2 SECONDS, THE VEHICLE WILL BEGIN TO ACCELERATE AND NORMAL DRIVING IS RESUMED. HOWEVER, IF THE ACCELERATOR PEDAL IS REPEATEDLY CYCLED, THE VEHICLE WILL NOT ACCELERATE. THE INABILITY TO MOVE THE VEHICLE IN TRAFFIC MAY INCREASE THE RISK OF A CRASH.
5NP-P9D5W-10
Service Bulletin/Repair Instructions
HYUNDAI MOTOR AMERICA IS CONDUCTING RECALL 149 TO UPDATE THE TCU SOFTWARE ON CERTAIN 2016 MODEL YEAR TUCSON 1.6L VEHICLES. RECALL 149 PROVIDES A PROCEDURE TO UPDATE THE TCU SOFTWARE.
5NP-S9D9P-10
Service Bulletin/Repair Instructions
THIS BULLETIN PROVIDES INFORMATION ON COMPONENTS, ATTRIBUTES, AND PRECAUTIONS OF THE 7-SPEED DRY-TYPE DUAL CLUTCH TRANSMISSION (DCT).
5NP-B3N9F-09
Service Bulletin/Repair Instructions
THIS BULLETIN PROVIDES INFORMATION FOR NEW SOFTWARE TO UPDATE THE NAVIGATION AND DISPLAY AUDIO SYSTEM TO INCLUDE THE APPLE CARPLAY AND ANDROID AUTO FEATURE. THIS BULLETIN DESCRIBES HOW TO TRANSFER THE UPDATE SOFTWARE TO A STORAGE DRIVE (USB OR SD CARD) AND PERFORM THE SOFTWARE INSTALLATION INTO THE AUDIO SYSTEM.
5NP-B6E2P-10
Service Bulletin/Repair Instructions
THE PCM OR TCM CONTAINS LOGIC TO ADJUST SOLENOID DUTY AND LINE PRESSURE AS NEEDED TO COMPENSATE FOR NORMAL CLUTCH WEAR OVER THE LIFE OF THE TRANSAXLE. THIS BULLETIN PROVIDES THE PROCEDURES NECESSARY TO RESET (ERASE) AND RELEARN THE PCM/TCM ADAPTIVE VALUES. AFTER THE FOLLOWING REPAIRS HAVE BEEN COMPLETED, THE PCM/TCM ADAPTIVE VALUES MUST BE RESET IN ORDER TO PROVIDE OPTIMUM SHIFT QUALITY. IF THE PROCEDURE IS NOT PERFORMED, THE TRANSMISSION MAY EXPERIENCE A SHIFT FLARE OR HARSH SHIFT. H REPLACE AUTOMATIC TRANSAXLE OR PCM/TCM H REPROGRAM OR EXCHANGE A PCM/TCM FROM ANOTHER VEHICLE
5NP-Q7S7E-09
Service Bulletin/Repair Instructions
THE SHIFT LEVER ON SOME 6-SPEED VEHICLES MAY INTERMITTENTLY NOT SHIFT OUT OF PARK. THIS BULLETIN PROVIDES THE DIAGNOSTIC PROCEDURES TO CORRECT THIS CONDITION.
5NP-M5P8Y-07
Service Bulletin/Repair Instructions
THIS TSB PROVIDES INTRUCTION ON UPDATING THE NAVIGATION/AUDIO SYSTEM TO INCLUDE APPLE CARPLAY AND ANDROID AUTO FEATURES.
5NP-F9E3D-09
Service Bulletin/Repair Instructions
THIS BULLETIN DESCRIBES STEPS TO ACTIVATE APPLICABLE VEHICLES WITH NAVIGATION OR DISPLAY AUDIO RADIOS THAT HAVE BEEN DE-ACTIVATED FOR THE FOLLOWING REASONS: H A CUSTOMER WHO INITIALLY WAIVES BLUE LINK ENROLLMENT, AND THEN DECIDES TO ENROLL AFTER PURCHASE OF VEHICLE. H A CUSTOMER WHO ALLOWS ALL PACKAGES OF THEIR BLUE LINK SUBSCRIPTION TO EXPIRE AND THEN WISHES TO RE-SUBSCRIBE TO BLUE LINK. H A CUSTOMER WHO DID NOT ENROLL IN BLUE LINK WITHIN THE FIRST 30 DAYS OF OWNERSHIP (AT WHICH TIME THE DEVICE BECOMES INACTIVE), BUT THEN DECIDES TO ENROLL. H A SUBSEQUENT OWNER WHO WISHES TO ENROLL IN BLUE LINK.
16-01-021
Service Bulletin/Repair Instructions
Recall 142 2016 Tucson (TL) Tow Hitch Harness Repair Hyundai Motor America is launching Recall 142 for certain 2016 MY Tucson vehicles. If an affected 2016 Tucson equipped with the Hyundai accessory tow package is driven with a trailer, it is possible that the trailers lights would not comply with Federal Motor Vehicle Safety Standards.
5NP-Q5D9Y-09
Service Bulletin/Repair Instructions
THE 2016 TUCSON (TL) IS AVAILABLE WITH AN ACCESSORY TRAILER HITCH AND ACCOMPANYING WIRING HARNESS. FOR AFFECTED VEHICLES WITH THIS ACCESSORY INSTALLED, WHEN THE VEHICLE¡¦S ENGINE IS RUNNING AND THE BRAKE LIGHTS ARE ILLUMINATED, IF THE TURN SIGNAL IS ACTIVATED THE TRAILER¡¦S TURN SIGNAL LAMP MAY EITHER: H REMAIN CONTINUOUSLY ILLUMINATED (NOT FLASH), OR H TURN OFF.
5NP-X4N7R-09
Service Bulletin/Repair Instructions
HYUNDAI MOTOR AMERICA IS LAUNCHING RECALL 142 FOR CERTAIN 2016 MY TUCSON VEHICLES. IF AN AFFECTED 2016 TUCSON EQUIPPED WITH THE HYUNDAI ACCESSORY TOW PACKAGE IS DRIVEN WITH A TRAILER, IT IS POSSIBLE THAT THE TRAILERS LIGHTS WOULD NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARDS.
5NP-V4K9Q-09
Service Bulletin/Repair Instructions
HYUNDAI MOTOR AMERICA IS CONDUCTING A SERVICE CAMPAIGN TO VERIFY THE BATTERY TERMINAL AND BATTERY MOUNTING BRACKET TORQUE ON CERTAIN 2016 MODEL YEAR TUCSON VEHICLES. SERVICE CAMPAIGN TCC PROVIDES A SERVICE PROCEDURE TO VERIFY THE TERMINAL AND BRACKET TORQUE.
5NP-W4D3B-09
Service Bulletin/Repair Instructions
DURING RECENT REWORK AT A PORT FACILITY, THE BATTERY TERMINALS AND BATTERY MOUNTING BRACKET BOLTS MIGHT NOT HAVE BEEN SECURED PROPERLY. THIS BULLETIN PROVIDES THE PROCEDURE TO VERIFY THE BATTERY TERMINAL AND BATTERY MOUNTING BRACKET TORQUE.
5NP-E2D7G-09
Service Bulletin/Repair Instructions
THE FOLLOWING VEHICLES ARE EQUIPPED WITH A 6-SPEED AUTOMATIC TRANSMISSION. THE ATF LEVEL MUST BE CHECKED BY THE FOLLOWING PROCEDURE.
142
Service Bulletin/Repair Instructions
WEBDCS: RECALL 142 2016 Tucson (TL) TRAILER HITCH WIRING - Remedy Not Yet Available Identification Once the remedy is available the Campaign Description will provide the necessary Technical Service Bulletin Number and the applicable link.
5NP-X6A3S-09
Service Bulletin/Repair Instructions
EFFECTIVE TUESDAY, APRIL 5, 2016 HYUNDAI MOTOR AMERICA WILL BE IDENTIFYING VINS WITH OPEN RECALL CAMPAIGN 142.
16-01-019
Service Bulletin/Repair Instructions
BATTERY TERMINAL AND MOUNTING BRACKET INSPECTION (SERVICE CAMPAIGN TCC) Description: During recent rework at a port facility, the battery terminals and battery mounting bracket bolts might not have been secured properly. This bulletin provides the procedure to verify the battery terminal and battery mounting bracket torque.
16-AT-004
Service Bulletin/Repair Instructions
AUTOMATIC TRANSAXLE (6-SPEED) ATM FLUID LEVEL CHECK Description: The following vehicles are equipped with a 6-speed automatic transmission. The ATF level must be checked by the following procedure: NOTICE Use only ATF meeting the SP-IV specification approved by Hyundai. DO NOT use SP-III or other ATF which may result in degradation of shift quality or transaxle durability.
16-AT-003
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
16-BE-001
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-15-01-038
Service Bulletin/Repair Instructions
SUMMARY TO BE PROVIDED ON A FUTURE DATE.