Vehicle report

2020 INDIAN FTR1200

Service bulletins

19 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

IND-11.11.2025

Other

This Indian motorcycle help center article provides information regarding the removal and installation on the seat on 2019-2025 Indian FTR motorcycles.

IND-10.16.2025

Other

This Indian motorcycle help center article provides information regarding adjustment of the suspension on model year 2019-2024 Indian FTR 1200 motorcycles.

IND-02.28.2025-01

Other

This Indian Motorcycle help center article provides information regarding how to inspect and adjust the clutch lever on your Indian FTR Motorcycles.

IND-02.25.2025-03

Other

This Indian Motorcycle help center article provides information regarding how to remove and install the battery on Indian FTR Motorcycles.

IND-02.25.2025-04

Other

This Indian Motorcycle help center article provides information regarding inspection and maintenance of the brake system on Indian FTR motorcycles.

IND-11.13.2024

Other

This Indian Motorcycle Help Center article provides details regarding the removal and installation of the seat on Model Year 2019-2024 FTR motorcycles.

2023-01-10.26.23

Service Bulletin/Repair Instructions

Some RIDE COMMAND 7" displays may experience a blank screen, blackout, or the impression that it won't turn on, leading to display replacement.

IND-06.26.2023

Service Bulletin/Repair Instructions

This communication provides information regarding software updates on the 4.3" touchscreen display powered by RIDE COMMAND on 2019-2022 Indian FTR models.

I-22-04

Service Bulletin/Repair Instructions

Indian Motorcycle has determined that Model Year 2019-2020 and 2022 FTR motorcycles may experience a failure at the coolant junction resulting in coolant loss during operation. If this occurs, coolant may come in contact with the rider, posing an injury hazard and/or coolant may come in contact with the rear tire, posing a crash hazard. To address this concern, Indian Motorcycle has released this safety recall with instructions to replace the coolant junction with an improved part.

I-22-03-02

Service Bulletin/Repair Instructions

Indian Motorcycle identified that on Indian Scout Models there is a potential for damage to occur to electrical hardware or the vehicle harness if the battery ground cable and ground joint is not connected properly. Damage can occur during procedures that require the battery cable to be disconnected or during battery removal and installation.

IND-02-14-2022

Service Bulletin/Repair Instructions

Best practices for gauges, speedometers, and tachometers providing information regarding how to clean and maintain. The version has been translated into French.

01IND2021-12-07

Service Bulletin/Repair Instructions

Indian General Ride Command Diagnosis

DEX.11.24.21

Service Bulletin/Repair Instructions

Polaris has identified an issue with a population of the 2881779-156 and 2881779-521 Air Intake Kits.

I-21-04-01

Service Bulletin/Repair Instructions

For international models, Indian Motorcycle has introduced new software for the Ride Command 7 inch display. This update includes the improved keyboards and keyboard support.

I-21-04-01 FAQ

Service Bulletin/Repair Instructions

Additional details associated with the I-21-04-01 bulletin.

I-21-04-01Email

Service Bulletin/Repair Instructions

Notifying dealers of the release of Team Tip I-21-04-01

IDH-HOLD

Service Bulletin/Repair Instructions

EFFECTIVE IMMEDIATELY: STOP SALE on affected motorcycle(s) identified in your inventory until further notice.

I-20-12-01

Service Bulletin/Repair Instructions

This Team Tip has been released by Indian Motorcycle to provide information regarding odometer maintenance and address concerns about correct odometer value.

DW 4.1

Service Bulletin/Repair Instructions

Digital Wrench version 4.1 is now available for download. Updating to version 4.1 is required to update the base Digital Wrench software version from 4.0 to 4.1 to allow for future MY20 vehicle support.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.