IND-04162026
Other
This Indian Motorcycle help center article provides information regarding how to install grips on model year(s) 2015-2024 Scout.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IND-04162026
This Indian Motorcycle help center article provides information regarding how to install grips on model year(s) 2015-2024 Scout.
IND-9.16.2025
This Indian Motorcycle help center article provides information regarding shock inspection and adjustment on model year 2015 - 2024 Indian Scout motorcycles.
IND-07.15.2025-1
This Indian Help Center article provides information regarding how to change the oil on Model Year 2015-2024 Indian Scout motorcycles.
IND-07.15.2025-2
This Indian Help Center article provides details regarding how to remove and replace the headlamp bulb Model Year 2015-2024 Indian Scout Motorcycles.
I-22-03-02
Indian Motorcycle identified that on Indian Scout Models there is a potential for damage to occur to electrical hardware or the vehicle harness if the battery ground cable and ground joint is not connected properly. Damage can occur during procedures that require the battery cable to be disconnected or during battery removal and installation. In an effort to reduce likelihood of service error, Indian Motorcycle is releasing this Team Tip to provide guidance on proper steps for dealer setup and service. The team tip was originally released March 22, 2022 and has been updated to include model year 2023-2024 Indian Scout vehicles.
IND-02.28.2025-02
This Indian Motorcycle help center article provides information regarding how to remove and replace the battery on your Scout, Scout Sixty, Scout Bobber, Scout Sixty, Scout Bobber Twenty or Scout Rogue.
IND-02.28.2025-03
This Indian Motorcycle help center article provides information regarding how to remove the driver's seat on Indian Scout motorcycles.
IND-02.25.2025
This Indian Motorcycle help center article provides information regarding how to properly maintain and adjust the clutch lever on your Indian Scout, Scout Sixty, Scout Bobber, Scout Bobber Twenty, and Scout Rogue.
IND-02.25.2025-01
This Indian Motorcycle help center article provides information regarding the inspection and maintenance of the brake system on Indian Scout, Scout Sixty, Scout Bobber, Scout Bobber Twenty and Scout Rogue motorcycles.
IND-02.25.2025-02
This Indian Motorcycle help center article provides information regarding how to inspect and adjust the drive belt tension on your Indian Scout, Scout Sixty, Scout Bobber, Scout Bobber Twenty or Scout Rogue.
IND-02.11.2025
This Indian Motorcycle help center article provides information regarding replacement of the air filter on model year 2015-2024 Indian Scout and Scout Bobber motorcycles
IND-02-14-2022
Best practices for gauges, speedometers, and tachometers providing information regarding how to clean and maintain. The version has been translated into French.
IDH-HOLD
EFFECTIVE IMMEDIATELY: STOP SALE on affected motorcycle(s) identified in your inventory until further notice.
I-20-12-01
This Team Tip has been released by Indian Motorcycle to provide information regarding odometer maintenance and address concerns about correct odometer value.
I-19-09-01
This Team Tip identifies differences between crankcases used throughout Indian Motorcycle 111 C.I. engine production, and introduces a new service crankcase for 2014-2020 models.
I-19-09-02
Updated information has been added to all Indian Motorcycle Service Manuals to provide dealers with clear directions when servicing the fuel system. Be sure to reference the applicable Service Manual for the most accurate information.
I-19-03-01
This Team Tip has been released to assist dealers when servicing vehicles that have, or are suspected to have, aftermarket (non-OEM) modifications. It is critical for expedient and accurate diagnosis of a motorcycle, to identify and disclose all existing modifications to Indian Technical Service. Use of aftermarket components can create operating characteristics and sensor feedback that do not align with factory parameters. These cases can send our technicians down the wrong path and result in longer diagnostic time and a poor customer experience.
I-18-10-01
Digital Wrench update version 09/13/2018 and later now REQUIRES an internet connection to perform ECM Reprogramming on Scout/Scout Sixty/Scout Bobber motorcycles. The new Reconfiguration Procedure automatically confirms vehicle information accuracy during ECM reprogramming.
I-18-05-02
Indian Motorcycle dealers should be aware that they may encounter 2015âÂÂ2018 Indian Scouts with any of three different front brake levers. Any of these are acceptable equipment on any Scout outlined, but you should take note of installation instructions/differences for each variation.
I-18-05-01
2014-2018 Indian Motorcycles utilize Absorbent Glass Mat (AGM) batteries which are selected for their superior vibration resistance, weight savings, and high output. This Team Tip is being released to provide the Indian dealer network with specific recommendations to help maintain and restore the AGM type batteries used in Indian Motorcycles.
G-17-10-02
At Polaris, we are committed to the safety of our customers and riders. Through product design, dedicated safety engineering, and increased consumer awareness, Polaris continues to work toward a safe riding experience and proper operation of our products. The following information can be used to help identify and report Product Safety Concerns.
ISA-17-01
Indian Motorcycle has determined that some Indian Scout and Scout Sixty motorcycles could develop a slow crank or no start situation due to a starter that was potentially manufactured with a defect. This Service Advisory has been released to communicate a process which enables dealers to assist customers and repair qualified motorcycles without requiring pre-authorization from Indian Motorcycle.
G-16-11-01
Polaris has released Team Tip G-16-10-01 to inform dealers that Polaris Mobile Digital Wrench (PMDW) version 3.28 or later requires dealers to enter a valid 10-digit Digital Wrench serial number to operate the app. The serial number requirement has been added to improve visibility to app downloads and usage.
G-15-12-01 R03
There is no doubt that for a Polaris customer the process of picking up a brand new vehicle is one of the most exciting times in the ownership experience. To ensure that all Polaris dealers are equipped to deliver a world-class experience that matches the high quality and excitement of the products, PCDX was developed to create a mobile streamlined dealership delivery experience. PCDX combines the setup, registration, and delivery process into one easy to use application.
G-15-12-01 R02
PCDX is an online and mobile interface for providing a consistent dealer setup and customer delivery experience. The interface walks the dealer and the customer through a standardized online form that includes the PDI (pre-delivery inspection), general warnings, assembly and inspection, safety bulletins, test ride, customer information, customer walkaround and discussion, and customer acceptance. This application has been proven in dealerships to automate document retention, streamline vehicle setup, and provide a consistent, professional customer experience. Vehicles shipped after 11/1/2015 no longer include a paper PDI form with the vehicle setup material; instead dealers should complete the vehicle setup and PDI using the PCDX application, which can be located on the Dealer Website under Service and Warranty â PCDX.
G-15-12-01
This Team Tip is being released to dealers to provide information regarding the required transition to online PCDX and PCDX training.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.