IND-02-14-2025-02
Other
This Indian Motorcycle help center article provides information regarding inspection and maintenance on the brake system for model year 2016 + Indian Springfield motorcycles.
Vehicle report
2016 INDIAN SPRINGFIELD
Service bulletins
34 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IND-02.14.2025-03
Other
This Indian Motorcycle help center article provides information regarding inspection and tension adjustment of the drive belt on model year 2016+ Indian Springfield motorcycles.
IND-02.14.2025-05
Other
This Indian Motorcycle help center article provides information regarding the installation and removal of the battery on model year 2016+ Indian Springfield.
IND-02.28.2025-04
Other
This Indian Motorcycle help center article provides information regarding inspection and tension adjustment of the drive belt on model year 2016+ Indian Springfield motorcycles.
IND-02.10.2025
Other
This Indian Motorcycle help center article provides information regarding the inspection and adjustment of the clutch lever on model year 2016+ Indian Springfield motorcycles.
IND-03.13.2023
Service Bulletin/Repair Instructions
This communication provides guidance on how to properly change the headlamp bulb on Indian Springfield, Indian Vintage, or MY2020 and older Indian Chief motorycles.
I-19-02-A/B/C
Service Bulletin/Repair Instructions
Indian Motorcycle has determined that an electrical defect may exist in 2014-2020 Heavyweight Air Cooled Indian Motorcycles, resulting in the unexpected loss of forward lighting. This defect may also cause heat damage to the Vehicle Control Module (VCM) and Pin 11 of the center VCM connector. Indian Motorcycle has released this bulletin with instructions to inspect the VCM connector for damage, update the VCM software, and replace the VCM and pin 11 connector if damaged.
I-22-03-02
Service Bulletin/Repair Instructions
Indian Motorcycle identified that on Indian Scout Models there is a potential for damage to occur to electrical hardware or the vehicle harness if the battery ground cable and ground joint is not connected properly. Damage can occur during procedures that require the battery cable to be disconnected or during battery removal and installation.
IND-02-14-2022
Service Bulletin/Repair Instructions
Best practices for gauges, speedometers, and tachometers providing information regarding how to clean and maintain. The version has been translated into French.
I-20-06 R02
Service Bulletin/Repair Instructions
Indian Motorcycle has determined that some 2014-2020 FullâSize (111 c.i. / 116 c.i.) and 2020 Challenger models sold in Japan show compliance concerns due to operating range frequency of key fob, Vehicle Control Module (VCM) or Wireless Control Module (WCM), and Tire Pressure Monitor System (TPMS). Mentioned devices operate in restricted in Japan frequency of 433Hhz.
IDH-HOLD
Service Bulletin/Repair Instructions
EFFECTIVE IMMEDIATELY: STOP SALE on affected motorcycle(s) identified in your inventory until further notice.
I-20-06 R01
Service Bulletin/Repair Instructions
Indian Motorcycle has determined that some 2014-2020 FullâSize (111 c.i. / 116 c.i.) and 2020 Challenger models sold in Japan show compliance concerns due to operating range frequency of key fob, Vehicle Control Module (VCM) or Wireless Control Module (WCM), and Tire Pressure Monitor System (TPMS). Mentioned devices operate in restricted in Japan frequency of 433Hhz.
I-20-12-01
Service Bulletin/Repair Instructions
This Team Tip has been released by Indian Motorcycle to provide information regarding odometer maintenance and address concerns about correct odometer value.
ISA-20-03
Service Bulletin/Repair Instructions
Indian Motorcycle has identified a potential calibration issue affecting some 111/116 c.i. motorcycles. When active, the P1530 fault causes the motorcycle to operate in a reduced power (limp) mode.
ISA-19-03 R03
Service Bulletin/Repair Instructions
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
ISA-19-03 R02
Service Bulletin/Repair Instructions
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
ISA-19-03 R01
Service Bulletin/Repair Instructions
Indian Motorcycle has determined the gear position switch used on 2014-2019 (111 c.i.) motorcycles may provide an inaccurate signal, which can lead to an incorrect gear being displayed. Oxidation on the contacts of the gear position switch may cause a change in resistance values resulting in the rider display indicating an incorrect gear. Incorrect gear indication during start-up can increase the risk of a crash.
I-19-09-01
Service Bulletin/Repair Instructions
This Team Tip identifies differences between crankcases used throughout Indian Motorcycle 111 C.I. engine production, and introduces a new service crankcase for 2014-2020 models.
I-19-09-02
Service Bulletin/Repair Instructions
Updated information has been added to all Indian Motorcycle Service Manuals to provide dealers with clear directions when servicing the fuel system. Be sure to reference the applicable Service Manual for the most accurate information.
I-19-03-01
Service Bulletin/Repair Instructions
This Team Tip has been released to assist dealers when servicing vehicles that have, or are suspected to have, aftermarket (non-OEM) modifications. It is critical for expedient and accurate diagnosis of a motorcycle, to identify and disclose all existing modifications to Indian Technical Service. Use of aftermarket components can create operating characteristics and sensor feedback that do not align with factory parameters. These cases can send our technicians down the wrong path and result in longer diagnostic time and a poor customer experience.
I-18-11-03
Service Bulletin/Repair Instructions
This Team Tip is designed to inform dealers about updated information regarding gear position switches for all 2014- 2019 Indian Motorcycle (111 c. i.) models. Updated information has been added to the Service Manual to provide dealers with clear direction on how to properly maintain and service gear position switches. We have also updated the maintenance interval chart to include the inspection and cleaning of the gear position switch at 10,000 mile intervals.
I-18-03
Service Bulletin/Repair Instructions
Indian Motorcycle has identified three separate calibration concerns currently affecting 2017 and 2018 full-size Indian Motorcycles. The Indian Motorcycle engineering team has released updated ECM and cluster calibrations to correct these concerns. Gear Position Fault, Coil Driver Fault, and Battery Drain issues will all be resolved with this reflash. Refer to Team Tip I-17-11-01 for more details.
I-18-05-01
Service Bulletin/Repair Instructions
2014-2018 Indian Motorcycles utilize Absorbent Glass Mat (AGM) batteries which are selected for their superior vibration resistance, weight savings, and high output. This Team Tip is being released to provide the Indian dealer network with specific recommendations to help maintain and restore the AGM type batteries used in Indian Motorcycles.
I-18-06 R01
Service Bulletin/Repair Instructions
Indian Motorcycle is actively investigating a potential concern affecting 111 ci engines that have been equipped with the Thunder Stroke 116 ci Stage 3 Big Bore accessory kit. Investigation is currently planned to conclude by 5/7/18, and at that time this communication will be re-issued with additional information. In the interim, Big Bore Kits and vehicles equipped with kits should not be sold.
I-17-11-01
Service Bulletin/Repair Instructions
Indian Motorcycle has identified three separate calibration concerns currently affecting 2017 and 2018 full-size Indian Motorcycles. The Indian Motorcycle engineering team is working quickly to develop and release updated ECM and cluster calibrations to correct these concerns, but during the interim, the strategies outlined below can reduce customer frustration and unnecessary diagnostic time.
G-17-10-02
Service Bulletin/Repair Instructions
At Polaris, we are committed to the safety of our customers and riders. Through product design, dedicated safety engineering, and increased consumer awareness, Polaris continues to work toward a safe riding experience and proper operation of our products. The following information can be used to help identify and report Product Safety Concerns.
ISA-17-02
Service Bulletin/Repair Instructions
Indian Motorcycle has determined that some 2014-2017 111ci motorcycles equipped with Stage 2 Performance Cams, Part Number 2881676, may experience intermittent drivability issues.
I-17-01 Letter
Service Bulletin/Repair Instructions
During the paint process, the device used to mask the fuel fill port allowed clear coat to be applied where exposure to fuel vapor is possible. If this occurs, fuel vapor can get under the clear coat, causing the base coat to bubble. To ensure that we continue to deliver world class quality, Indian Motorcycle will replace all affected fuel tanks with a new tank that has been painted to factory specification using an improved masking process.
I-17-01
Service Bulletin/Repair Instructions
Indian Motorcycle has learned that a defect exists affecting all 2016 Jack DanielâÂÂsî Limited Edition Vintage and Springfield fuel tanks, which may affect paint adhesion around the fuel fill port. During the paint process an alteration to the fuel fill port masking fixture caused the clear coat to terminate where exposure to fuel vapor is possible. If this occurs, fuel vapor can get under the clear coat, causing the base coat to bubble. Indian Motorcycle will replace all affected fuel tanks with a new tank that has been painted to factory specification using an improved masking fixture.
I-16-03-01
Service Bulletin/Repair Instructions
Indian Motorcycle has implemented an updated, maintenance-free fuel pump assembly for all full size Indian motorcycles produced from November 11, 2015. The updated fuel pump is a direct replacement for the previous version and does not affect fuel pump removal or installation procedures.
G-15-12-01 R03
Service Bulletin/Repair Instructions
There is no doubt that for a Polaris customer the process of picking up a brand new vehicle is one of the most exciting times in the ownership experience. To ensure that all Polaris dealers are equipped to deliver a world-class experience that matches the high quality and excitement of the products, PCDX was developed to create a mobile streamlined dealership delivery experience. PCDX combines the setup, registration, and delivery process into one easy to use application.
I-16-01-01
Service Bulletin/Repair Instructions
Indian Motorcycle has determined that some 2016 full-size Indian Motorcycles may develop an oil leak from the Primary Access Cover Seal. Leaks typically appear during setup or dealer flooring. This may occur if the seal (PN:5415433) migrated out of position during assembly, prior to cover installation.
G-15-12-01 R02
Service Bulletin/Repair Instructions
PCDX is an online and mobile interface for providing a consistent dealer setup and customer delivery experience. The interface walks the dealer and the customer through a standardized online form that includes the PDI (pre-delivery inspection), general warnings, assembly and inspection, safety bulletins, test ride, customer information, customer walkaround and discussion, and customer acceptance. This application has been proven in dealerships to automate document retention, streamline vehicle setup, and provide a consistent, professional customer experience. Vehicles shipped after 11/1/2015 no longer include a paper PDI form with the vehicle setup material; instead dealers should complete the vehicle setup and PDI using the PCDX application, which can be located on the Dealer Website under Service and Warranty â PCDX.
G-15-12-01
Service Bulletin/Repair Instructions
This Team Tip is being released to dealers to provide information regarding the required transition to online PCDX and PCDX training.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.