IK2300016
Service Bulletin/Repair Instructions
This document will guide the user through diagnosing a failed high-voltage battery when there is a suspected concern indicated by symptom or fault code.
Vehicle report
2025 INTERNATIONAL EMV
Service bulletins
29 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IK2300024
Service Bulletin/Repair Instructions
IC Bus® Electric CE Series and International® eMV™ Series VCU calibration release information
IK2300021
Service Bulletin/Repair Instructions
This document will guide the user through information required to know before servicing air conditioning systems on an electric vehicle
26103
Service Campaign
This document will guide the user through replacing the A/C Refrigerant Oil Service Label.
26101
Service Campaign
Certain International® trucks and IC BusTM CE Series buses may have out of date BCM programing that may cause erroneous fault codes after a vehicle sits for 2 or 3 days.
IK2600090
Other
New CARB Idle Reduction Change Request
IK4300035
Service Bulletin/Repair Instructions
This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.
IK2600255
Other
This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 1037 to ensure continued compliance with greenhouse gas (GHG) regulations.
IK2300038
Service Bulletin/Repair Instructions
This document will walk the user through correcting the battery State of Charge (SOC) calibration. It has been found on some electric vehicles that the SOC calibration can become incorrect over time. Often times this is from the vehicle sitting a long period without use or charging the batteries. This will result in the SOC value on the cluster becoming inaccurate compared to the SOC value in the battery packs. This may also result in a low value for the vehicle range estimate on the EGC.
IK2600047
Service Bulletin/Repair Instructions
Engine replacements for all International engines will need to follow this procedure.
IK1600272
Service Bulletin/Repair Instructions
This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.
IK2600279
Service Bulletin/Repair Instructions
This document provides: Steps to take when switch pack programming fails, or when switch pack disappears after body control module update Sample scenarios Additional information to assist readers in understanding DLB switch pack programming
IK0600030
Service Bulletin/Repair Instructions
This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)
IK2300045
Service Bulletin/Repair Instructions
This document will guide the user through determining why the vehicle is not able to enable the high voltage system or enter Drive Ready mode.
IK2300032
Service Bulletin/Repair Instructions
This document will guide the user through the TPIM HV ( High Voltage ) DC Cable installation with proper shielding position.
IK1201009
Service Bulletin/Repair Instructions
In some geographic areas, ambient temperatures reaching below 15°F (-10 °C), including high levels of humidity, an operator may experience engine stalling, low performance, and or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists all the currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.
IK0400173
Service Bulletin/Repair Instructions
This document will guide the user through the Hill Hold Assist VIN list to replace the Bendix blank ECUs.
IK3400001
Service Bulletin/Repair Instructions
Title: Service Portal iKNow Feedback Case Types Applies To: All
24106
Service Campaign
Air Conditioning Human Machine Interface (HMI) Panel and Electronic Control Unit (ECU) Software Update
IK1400005
Service Bulletin/Repair Instructions
Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
25104
Service Campaign
MODELS INVOLVED: International® MV™ Series trucks
IK1900022
Service Bulletin/Repair Instructions
Title: A/C Refrigerant and Oil Capacities Applies To: All current models
IK0900157
Service Bulletin/Repair Instructions
Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
IK1200716
Service Bulletin/Repair Instructions
Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean Truck Check
IK0500054
Service Bulletin/Repair Instructions
Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
IK2600069
Service Bulletin/Repair Instructions
Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
IK0300078
Service Bulletin/Repair Instructions
This document reminds technicians of the critical relationship between the truck's suspension and the driveline operating angles. The information applies to diesel, gas, and electric vehicles.
IK2300041
Service Bulletin/Repair Instructions
Title: 6090/6091 Connector Damage Applies To: IC Bus® Electric CE Series, International® eMV™ Series
24518
Service Campaign
Windshield defrosting and defogging systems on certain 2025 International® eMV™ Series vehicles built 5/21/2024 thru 10/21/2024.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.