IK2600083
Service Bulletin/Repair Instructions
The new clusters in the post-2007 models store the mileage in memory. When replacing the cluster, follow these instructions to program the current vehicle mileage into the memory of the new cluster.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IK2600083
The new clusters in the post-2007 models store the mileage in memory. When replacing the cluster, follow these instructions to program the current vehicle mileage into the memory of the new cluster.
IK2600090
New CARB Idle Reduction Change Request
IK4300035
This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.
IK1201291
This document will guide the user through Mass Air Flow (MAF) calibration procedure
IK2600047
Engine replacements for all International engines will need to follow this procedure.
IK1600272
This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.
IK2600279
This document provides: Steps to take when switch pack programming fails, or when switch pack disappears after body control module update Sample scenarios Additional information to assist readers in understanding DLB switch pack programming
IK1201009
In some geographic areas, ambient temperatures reaching below 40°F (4°C), including high levels of humidity, an operator may experience engine stalling, low performance, and/or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.
IK0600030
This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)
IK3400001
Title: Service Portal iKNow Feedback Case Types Applies To: All
IK1400005
Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
IK1900022
Title: A/C Refrigerant and Oil Capacities Applies To: All current models
IK0900157
Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
IK1200716
Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean Truck Check
IK0500054
Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
IK2600069
Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
IK0300078
This document reminds technicians of the critical relationship between the truck's suspension and the driveline operating angles. The information applies to diesel, gas, and electric vehicles.
IK1400023
This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
IK0400037
This document is to guide users to eliminate brake pedal rattle noise.
IK0200013
Suggested alignment target values when performing a vehicle axle alignment.
IK0800407
Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
IK0800351
J1939 Data Link Source Address Information
IK0300010
Diagnosis of chassis wander complaints.
IK0400040
General Wheel Speed Sensor Troubleshooting
IKo800080
J1939 Data Link Troubleshooting
IK1201391
Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
IK1201466
New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines
IK1201472
Pico Scope CCOS (Crankcase Separator Test)
IK0800605
PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
IK0800607
PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
IK0800609
PicoScope Test for Datalink (CAN) Health Shorts & opens
IK0800610
PicoScope Test Resistance and Ohmmeter
IK0800611
PicoScope Wheel Speed Sensor Test
IK1201469
PicoScope Test One Channel RCT
IK1600131
Cab water leak troubleshooting tips; HX with steel cab only
IK2600052
Calculating pulses per mile (speedometer setting); only models equipped with International engines
IK1201241
ECM Calibration for DPF Replacement; Applies to MaxxForce Engines
IK0800080
J1939 Data Link Troubleshooting
IK1000003
Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
IK1201299
Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
IK0700112
Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
IK1600233
Cab Lean Concern
IK0800504
Repair Procedures for Vehicles Struck by Lightning
IK1600258
Cleaning and Disinfecting Trucks and Buses
IK0400159
Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
IK0800444
Driver Information Display (VIS/DID) screen fails to boot up.
IK1500085
LT / ProStar Fuel Tank Unable to Fill; only sleeper models
IK1200508
2007 EPA MaxxForce® 11/13 - DTC 1628 Lambda Sensor Temp above Maximum; Only truck models with 2007 EPA MaxxForce 11 and 13 engines
IK0800092
The First Check to make when Troubleshooting any Body Controller or ESC Issue
K1200716
Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
IK0800085
ProStar Electrical System Load Shed Feature 08XEV
IK1600207
Wind noise at upper side of cab door
IK0800059
Brake Lights Staying On
IK0800017
Programing New Key Fobs
59310-004
Hendrickson Assembly Instructions; Transverse Torque Rods
IK0800130
Air Pressure Gauges and A/C Pressure Transducer Troubleshooting
IK0300047
Improved Bushings for Hendrickson Torque Rods
4328530R1
Tool Instruction - BCM Programming Harness
IK0800475
Radio Diagnostics and Information
Rec17V-792_2017-
The fire extinguishers may become clogged or require excessive force to activate. In certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. Only equipped with Kidde model FC5 and FC10 fire extinguishers identified by International part numbers 1696423C2 and 1696423C3 and installed post production at Navistar?s Truck Sales Processing Center (TSPC).
IK4300001
Updating OnCommand Link with Accelerator
IK1200921
ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
IK2700100
OnCommand EZ-Tech
IK2500511
Using Supplier Software to Check DTCs
IK0800341
Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
IK0700097
NEW Ultrasonic DEF Tank Sending Unit; only models with SCR Aftertreatment system.
IK0700096
Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR Aftertreatment system and N9, N10, N13, A26 or Cummins ISB, ISL, ISX engines built from January 2016
IK0800546
HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
IK2900030
Dealer EZ-Tech and Diagnostic Software Support Resource Center
IK1201363
CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
IK1201360
Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
IK2700090
OnCommand EZ-Tech Download Center
IK0800537
DM harness inspection; Only with Steering Column feature code 05710
IK0500038
Steering Shake, Shimmy, Shudder, or Steering Vibration; only with 14k front weight rated axles and below
IK0500058
Steering Fluids
IK1201248
Cooling System Flush Procedure
IK0800374
To Get A Helios Capture; All 1939 and 1708 multiplexed trucks only
IK0400057
NEW BRAKE LIGHT OPERATION; PROSTAR AND LONESTAR WITH AIR BRAKES
IK1200029
RADIATOR INTERNAL RESTRICTION AND FLUSH PROCEDURE
IK1600201
PROSTAR SLEEPER CAB STRUT NOISE OR AIR LEAKS
IK0800441
Adding an Electronic Trailer Brake Controller
TT7829EN
Tech Tip to aid technicians in the efficient removal and installation of a TC10 transmission
IK-1201314
PERFORMING RELATIVE COMPRESSION TEST AND MISFIRE TEST WITH CPA TOOL
IK-1200915
MISFIRE DIAGNOSTICS IBB; SPN132(X) - FMI 31
IK-1201117
IK1201117 - OPEN CRANKCASE BREATHER
IK-1500051
IK1500051 - DAVCO FUEL PRO 382 TECHNICAL MANUAL, INSTALLATION, DIAGNOSTICS, AND SERVICE
IK-1201253
IK1201253 - EXHAUST MANIFOLD SERVICE PROCEDURES
IK-1200991
DIAGNOSING HARD START / NO START, ROUGH IDLE COMPLAINTS OR ICP PRESSURE CONCERNS
IK-1201042
CRANKSHAFT AND CAMSHAFT POSITION SENSOR AIR GAP SPECIFICATIONS
IK-1201326
IK1201326 - SERVICE PARTS DAMAGED NEW TURBOCHARGER OIL SUPPLY TUBE
IK1600116
Mirror / Map Light / Visor LED Lighting Up when CB MIC is keyed
IK0900115
Fan Shaft Failure Diagnostics with feature code 12THX (Viscous Fan Drive)
IK0800427
Active Faults During Load Shed
IK0800414
Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
IK0800460
Build to VIN Wiring Harnesses
IK1900080
VORAD VS-400 Side Display Inop
IK0300008
Vibration Troubleshooting
IK1600023
Mirror Repair Procedures and Replacement Parts Availability
IK1900212
Front Blower Motor Runs Breifly At Initial Power Up
IK0400125
NAVISTAR: VARIOUS TYPES NAVISTAR VEHICLES WILL BE RECEIVING UPDATES ON THE REAR S CAM TUBE/ BRACKET PARTS. *TA UPDATED 9/10/15 *CN
IK0400146
N13, MaxxForce 11, 13 engine Two Cylinder Air Compressor Testing
IK0800296
HVAC faults 520211 and 520465
IK1100005
Eaton Clutch Information
IK1900218
ESPAR AirTronic Low Run Time.
IK0700032
DPF Snap Accel Test - Quick Test to All vehicles with DPFs
IK-0800465
NAVISTAR: STEERING WHEEL WILL NOT HAVE SHIFT CONTROLS DUE TO PHOENIX SHIFTER BEING PROGRAMMED TO LOOK FOR STEERING WHEEL MOUNTED SHIFT CONTROLS AND IF AN ERROR IS DETECTED, A FAULT WILL BE SET. MODEL PROSTAR. *PE UPDATED 9/14/15 *CN
IK1500005
Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; equipped with feature 595192 built after 08/19/2002
IK1500035
Dual Fuel Tank Transfer Pump Troubleshooting on Post-2007 NGV and ProStar
MIN15101
NAVISTAR: SOME NAVISTAR PROSTAR VEHICLES WITH THE CUMMINS ISX 15L ENGINES INSTALLED WERE BUILT WITH THE FRONT LEFT FRAME CROSSMEMBER BOLT INSTALLED IN THE WRONG DIRECTION. *TA
IK1900172
ESPAR HEATER DIAGNOSTIC GUIDE
IK0400141
Trailer ABS In-Dash Lamp Stays On After A Trailer Has Been Disconnected; only with An In-Dash Trailer ABS Warning Lamp feature
IK0800485
Cluster Software Update Instructions
IK0800119
ProStar and NHPV with Suspension Dump feature code 595ACA or 595BBC
IK-080227
INTERNATIONAL: TWO NEW ACCELERATOR POSITION SENSOR (APS) CONTAIN NON-CONTACT HALL EFFECT IDLE VALIDATION SENSORS HAS BEEN DEVELOPED AND RELEASED FOR PRE 2010 EMISSIONS INTERNATIONAL ENGINES. MODEL 2008-09 MAXXFORCE 11 AND 13 ENGINE. *PE
IK0800227
ACCELERATOR POSITION SENSOR / IDLE VALIDATION SWITCH APS / IVS DIAGNOSTICS
IK0800499
BATTERY DISCHARGE DURING EXTENDED STORAGE; PROSTAR EQUIPPED WITH FEATURE 0008WEN
IK-0900094
IK: REPAIR INFORMATION REGARDING THE MISSING OR LOOSE BOLT ATTACHING HORTON STRATIS ANTI ROTATION BRACKET (ARB) TO ENGINE. MODEL PROSTAR, WORKSTAR, LONESTAR. NO YEARS LISTED. *PE UPDATED 6/27/2014 *JS UPDATED 11/7/14. *PE UPDATED 1/30/15. *PE
IK1600202
COWL TRAY SEAL; ONLY BUILT PRIOR TO 11/11/2013
IK0800279
BODY CONTROLLER SOFTWARE REVISION 231 HVAC IMPROVEMENTS; POST 2007 MODELS ONLY
IK0400133
Collision Avoidance Wingman FLR-10 to FLR 20 Retrofit
IK0800185
Wipers and Aftertreatment Lights Inop on Post 2007 Trucks with Body Controller
IK1900015
Activate HVAC Front Blower Message In Dash Message center; with Sleeper cab only
IK1900019
Sleeper HVAC blower will not run on high with engine off; with Sleeper cab only
IK1900077
Air Solenoid Issues on Trucks built after 1-1-2007
IK-0800279
INTERNATIONAL TRUCK: THERE IS A BODY CONTROLLER SOFTWARE REVISION. *RM ALSO INCLUDED MODEL DURASTAR MODEL YEAR 2008. UPDATED 3/11/2014 *JS UPDATED 8/04/2014 *JS
IK1300016
New Synthetic Oil for Eaton and Spicer Transmissions; only with Eaton or Spicer transmissions
IK1300021
Transmission Keeps Shifting and Display Keeps Flashing After Ignition is Turned Off; only with Freedom Line Transmission
IK1300029
Roll Pins Backing Out of Bell Crank; Only with manual transmission
IK0500049
LUK/Ixetic Power Steering Pump Fittings; only Vehicles equipped with Maxxforce 11, 13 engines
IK0900030
In Chassis Cleaning Procedure for Cooling Package in All Models with MaxxForce 11, 13 Engines
IK0800478
Headlight Condensation or Frost; excludes sealed beam headlights such as on WorkStar, Paystar and 9900i)
IK1100004
Clutch Linkage Rattle
IK1600008
Bottom Bunk Rattle on ProStar; only models built prior to 12-11-07
IK1600034
Rubbing Between Front and Rear Skirts on ProStar
IK1600049
ProStar Side Skirt Paint Mismatch
IK1600062
Push-in Trim Fasteners Popping out or Missing
IK1600063
Sleeper Curtain Getting Sucked into HVAC Duct
IK1600064
No Idle Curtains Missing Velcro; only models with feature 16UZL - No Idle HVAC
IK1600065
Sleeper Buzz, Squeak, Rattle
IK1600066
Drawer Rattle
IK1600067
Work Surface Rattle
IK1600095
Work Surface Latch Jammed - Replacement
IK-0400023
IKNOW: THE BRAKE CONTROLLER MAY HAVE FUSED LABELED AS 30 AMP FUSE. IT SHOULD BE LABELED AS 15 AMP FUSE IN THE F8-B LOCATION. *JS
IK0400023
ProStar Wabco Brake Control Fuse Specification; Only with Wabco Brakes Controller
IK0400033
Automatic Traction Control (ATC) Tire Size Compatibility; only with feature 04AZD and 04AZJ Bendix ATC
IK1600002
ProStar Air Deflector Mounting Procedure (Rattling Noise from Air Deflector or Bulging Between Fasteners)
IK1500002
Fuel Level Not Equal Between Tanks on Dual Draw Dual Return Dual Tank Systems.
IK0900018
Prostar upper radiator pipe cracking or breaking at support bracket or at flange area; only Prostars built before 8/28/07
IK0800014
City Horn Blows When Driver Shuts off Truck and Walks Away; only equipped with with ESC or Body Controller
IK0800056
Retrieving Fault Codes Through the Cluster Doesn?t Work
IK0800196
Asterisk in Lower Right Quadrant of Dash Display
IK1200271
Remote Throttle Control Options for Vehicles with ESC?s or Body Controllers and International Engines
IK0800352
Body Controller/ESC Software Updates
IK-1500040
INTERNATIONAL: THREE INCH FUEL TANK FILL CAP GASKET CRACKING. APPLIES TO HEAVY DUTY MODELS. SOME OF THE THREE INCH FUEL FILL CAP GASKETS HAVE BEEN CRACKING. USED PRIMARILY ON HEAVY DUTY VEHICLES LIKE 5000, 8000, 9000 AND PROSTAR. *PE UPDATED 3/20/14. *PE
IK0800064
Battery Drain ( Parasitic Drain) with Sleeper Refrigerator; only models with optional refrigerator
IK0800201
Disable Cummins Icon; Only models equipped with Cummins engine and with Icon installed.
IK0700002
Proper Exhaust Shield Orientation
IK0700006
Turbocharger Exhaust Pipe Leak; only models with Cummins ISX ,ISM or CAT C13 Engines Built before 11-26-2007
IK0900007
Ethylene Glycol Coolant Color Change to be Phased-In Approximately April 1, 2004
IK-0700015
INTERNATIONAL: EXHAUST SYSTEM AND AFTERTREATMENT INLET CAMPAIGN C0957. APPLIES TO TRUCKS WITH SLEEPERS. *PE UPDATED 7/16/10. *PE UPDATED 8/17/10. *PE UPDATED 02/07/2014 *JS
IK-0700047
INTERNATIONAL: ON THE AFTERTREATMENT SUPPORT HANGER, THE HORIZONTAL AFTERTREATMENT SUPPORT ROD BOLT IS LOOSE OR BACKED OUT, DUE TO POSSIBLE WEAR AND NEEDS TO BE REPLACED, IF NECESSARY. *PE UPDATED 02/07/2014 *JS
IK0700015
ISX CM871 Navistar Exhaust System and Aftertreatment Inlet Campaign; only models with sleepers Built between August 1, 2008 and August 1, 2009 with Cummins ISX Engines
IK0800246
Manual Mode Button on the Eaton Shift Console is flashing with No Active Codes in the TCM. With Active Code 3655, 3654 or 3656 in the Body Controller; only models with Eaton Ultra and Auto Shift Transmissions
IK0800468
Dash Cluster Stuck in one mode
IK1600177
SkyRise Roof Replacement
IK0800037
Location of 1000 OHM Resistor In the HVAC Wiring
IK-0400057
NAVISTAR: THE BRAKE LIGHTS STAY ON AND ARE NOT WORKING. THERE ARE PROBLEMS WITH VOLTAGE. *RM UPDATED 10/15/12. *PE UPDATED 11/6/2013 *JS
IK0800043
How to Add Lift Gate Battery Protection; only models equipped with Electronic System Controller (ESC) or Body Controller (BC).
IK0900075
Horton Stratis Fan Hub Diagnostics
IK0800047
Remote Power Module (RPM) Troubleshooting
IK-0800427
INTERNATIONAL: THERE ARE CODE FAULTS, CAUSED BY LOAD SHEDDING, LOADED IN OTHER MODULES AND UNIT GOES INTO LOAD SHED AND FAILS TO HAVE POWER IN SWITCHES. MODEL PROSTAR, LONESTAR. NO YEARS LISTED. *PE
IK-0800418
INTERNATIONAL: WELDON TAIL LIGHTS ARE REPLACING THE TRUCK LITE ON SOME TRUCKS BUILT BEFORE 2/21/13. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE UPDATED 07/23/2013 *JS UPDATED 09/11/2013 *JS
IK0800418
Additional hardware is required when replacing Tail Light Assemblies from Truck-Lite to Weldon; only ProStar models with tail light part numbers 3707933C93 and 3707932C93
IK0500007
Adjustment Procedure for Tilt Only Steering Column; only models with Feature code 0005708
IK1900088
Wiper Troubleshooting
IK1600027
Cab Ride Height Specifications and Adjustment Procedures
IK-1600183
IKNOW: REPAIR PROCEDURES FOR COMPLAINTS OF FOUL ODORS IN THE CAB. APPLIES TO POST 2010 PROSTAR/TRANSTAR. *JS
IK-08000422
IKNOW: THE BATTERY CUBE FUSE STUD TERMINAL WITH THE ALTERNATIVE PART NEEDS TO BE REPLACED. SOME VEHICLES MAY EXPERIENCE A SHORTED FUSE BECAUSE THE INSTALLATION WAS IMPROPER. MODELS INCLUDE ALL PROSTARS (PRIOR TO SCR RELEASE) *JS
IK-1900205
IKNOW: INSTALL KIT IN ORDER TO ALLEVIATE LOOSE, VIBRATING, OR RATTLING OF THE HOOD-MOUNTED MIRRORS. *JS
IK0800139
Remote Engine Speed Control Module (RESCM) Troubleshooting; Only trucks equipped with RESCM
IK-0400119
IKNOW: PROSTAR BRAKE ASSEMBLY CONVERSION. THE WELD MAY BE CRACKING IN THE STAMPED S-CAM TUBE BRACKET. THE STAMPED SPIDER BRAKE ASSEMBLY SHOULD BE CONVERTED TO A CAST SPIDER BRAKE ASSEMBLY. *JS
IK0800369
Cummins Active Fault Code 249 / 256 Ambient Air Temperature Sensor; only models with Cummins ISX or ISM engines
IK1200431
Cummins Ambient Air Temperature (AAT) Sensor Located Rear of Vehicle; Only models with Cummins ISX or ISM engines
IK1600174
Updating Body Controller Software
IK-0800415
INTERNATIONAL: THE TURN SIGNAL LAMPS AND HAZARDS FAILS TO ILLUMINATE AND/OR WORK PROPERLY. MODEL 2007 AND NEWER HPV, PROSTAR, LONESTAR. *PE
IK0800411
Body Controller Resource Center
IK0800111
Inverter/Charger Power System
IK0800412
Headlight Operation and Troubleshooting; only Post 2007 Vehicles Built with a Body Controller
IK1600171
Espar Heater; only models with Feature Code 16UZL
IK1600170
Sleeper Side Sill/Underbody Cross-Member Weld Check and Repair
IK0800366
Power Windows randomly stop
IK1200634
Aftertreatment Resource Center; All models equipped with EPA 2007 and newer engines
IK0300004
Drive Axle and Steer Axle Air Suspension Ride Height Settings; only models equipped with Feature Code 03AZD and 03AZG, Hendrickson MaxxPower Front Air Suspension.
IK0800404
Circuit diagram for ProStar/LoneStar Fifth wheel; link to missing diagram.
IK-0500045
INTERNATIONAL (NAVISTAR): INFORMATION IS BEING PROVIDED REGARDING THE INSPECTION AND REMOVAL OF STEERING WHEEL AND THREE WELDS BETWEEN ARMATURE AND STEERING WHEEL. MODELS PROSTAR, LONESTAR, TRANSTAR, WORKSTAR, DURASTAR. NO MODEL YEARS LISTED. *PE
IK-1500067
INTERNATIONAL: INFORMATION REGARDING THE FUEL SYSTEM COMPONENTS AND REPAIRS TO CORRECT INTERFERENCE TO AVOID FUEL LINE CONTACT WEAR. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE
IK-0500043
INTERNATIONAL: INFORMATION BEING PROVIDED REGARDING THE RUSTING OF POWER STEERING HOSES THAT NEEDS TO BE REMOVED AND REPLACED. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE
IK-0800382
INTERNATIONAL: BATTERY CABLES ROUTED TOO CLOSE TO SPRING HANGER SHACKLE BOLT FOR LEFT-SIDED BATTERY BOX OR 8600 BOC BATTERY BOX. MODEL PRO-STAR113 GARLAND BUILT. NO MODEL YEARS LISTED. *PE
IK-0800383
INTERNATIONAL: SPRING HANGER SHACKLE BOLT MAY HAVE BATTERY CABLES ROUTED TOO CLOSE FOR LEFT SIDED BATTERY BOX OR 8600 LSM BOC BATTERY BOX FOR EXCOBEDO BUILT PROSTAR 113. NO MODEL YEARS LISTED. *PE
IK-0400087
NAVISTAR: NEED TO REMOUNT OR REALIGN THE AIR SUSPENSION PRESSURE SENSOR HORIZONTAL AND NOT VERTICAL. *PE UPDATED 4/9/12. *JS
IK-1900168
NAVISTAR: INFORMATION IS BEING PROVIDED REGARDING THE FAILURE OF THE SWITCH FOR THE 5TH (FIFTH) WHEEL JAW UNLOCK. MODELS PROSTAR AND LONESTAR. NO MODEL YEARS LISTED. *PE UPDATED 5/9/12 *JS
IK-0800334
INCORRECT 5AMP FUSE AT LOCATION F11-D ON WABCO 6 SENSOR 6 MODULATER. *KB
AFC-11929
NAVISTAR: HVAC FRONT INSIDE MODULE DRAIN REPAIR. *KB
IK-1900144
HVAC SYSTEM COMPRESSOR AND DISCHARGE HOSE FAILURE DIAGNOSTICS AND REPAIR PROCEDURES. NAVISTAR. *KB
AFC-12902
NAVISTAR: MAXXFORCE 11, 13, AND 15 RECALIBRATION TO ADRESS FREQUENT WARNING LIGHTS. *KB
SB-IK-0800293-2
NAVISTAR: TROUBLESHOOTING FOR INTERMITTENT OR NO FRONT BLOWER OPERATION. *RM
AFC-10910
NAVISTAR: SOME ENGINES MAY EXPERIENCE ENGINE OVER-HEATING DUE TO THE FAN CLUTCH NOT ACTUATING. *RM UPDATED 5/23/11. *PE
IK-0300023
INTERNATIONAL: LOWER FRONT SHOCK MOUNT BENDING ON PROSTAR S MODELS (113) BBC W/ALL ENGINES AND PROSTAR MODELS (122) BBC W/CATERPILLAR C15 ENGINES. PROSTAR MODELS WITH CATERPILLAR C15 ENGINES WILL ONLY HAVE THE ISSUE ON THE RIGHT SIDE. NO MODEL YEARS LISTED. *PE UPDATED 4/6/11. *PE
IK-1900136
NAVISTAR INT'L: DEVELOPED IN RESPONSE TO REPORTS OF INTERMITTENT OR INOPERABLE FRONT BLOWER MOTORS ON PROSTAR AND LONESTAR MODELS BUILT 12/10/07-12/04/09. PROVIDES GENERAL TROUBLESHOOOTING PROCEDURE FOR THE HVAC BLOWER CIRCUIT THAT CAN BE USED FOR ALL HPV MODELS BUILT AFTER 12/10/07. DURASTAR, TRANSTAR AND WORKSTAR MODEL. *PE
REC G-10511
NAVISTAR: FASTENER THAT CLAMPS PITMAN ARM TO STEERING GEAR SHAFT MAY NOT HAVE BEEN FULLY TIGHTENED UPON ASSEMBLY. THIS CONDITION MAY ALLOW PITMAN ARM TO SLIP ON SHAFT RESULTING IN REDUCTION OF STEERING CONTROL. REDUCTION IN STEERING CONTROL INCREASES RISK OF A CRASH THAT MAY RESULT IN PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH. *PE
IK-1200431
NAVISTAR: CUMMINS AIR TEMPERATURE SENSOR LOCATED REAR OF VEHICLE, INSTEAD OF FRONT, ON SOME MODELS. THIS CAN BE MISTAKEN FOR A GROUND CONNECTOR. DO NOT BOLT THIS SENSOR TO GROUND. SHOULD REMAIN STRAPPED TO HARNESS. *PE
SB-IK-0400063
INTERNATIONAL: BRAKE PEDAL NOT RETURNING AND STICKING SLIGHTLY IN THE APPLIED POSITION. BRAKE PEDAL NOT RETURNING AND BINDING. BRAKE LIGHT STAYING ON. MODEL PROSTAR, NO MODEL YEARS LISTED. *PE UPDATE 02/17/10. *PE UPDATED 7/16/10. *PE
IK-1600114
INTERNATIONAL: FIXED VENT WINDOW 016HKR REPLACEMENT AND REBONDING INSTRUCTIONS. UNWANTED AIR, NOISE, OR WATER INTRUSTION. MODEL YEARS NOT LISTED. *PE
AFC-09908
NAVISTAR: IMPLEMENTATION OF ENGINE RECALIBRATION. THIS WILL REQUIRE THE RECALIBRATION OF THE ENGINE ECM. IN COLD WEATHER CONDITIONS, THE SOFTWARE UPGRADE WILL ENSURE PROPER LUBRICATION OF THE TURBOCHARGER BY DELAYING ACCELERATOR PEDAL RESPONSE UNTIL BUILD UP OF ADEQUATE OIL PRESSURE. THIS ACTION WILL PREVENT THE ENGINE FROM BEING IMMEDIATELY ACCELERATED AFTER A COLD START. NO MODEL YEARS LISTED. *PE
IK-0800194
INTERNATIONAL TRUCK: INTERMITTENT OR NO FRONT BLOWER OPERATION. OUTLINES THE PROCESS FOR TROUBLESHOOTING THE FRONT BLOWER ON PROSTAR, LONESTAR, DURASTAR, TRANSTAR, AND WORKSTAR MODELS. NO MODEL YEARS LISTED. *PE
IK-0800158
INTERNATIONAL: ICON WILL NOT FUNCTION PROPERLY. ABS LIGHTS COME ON WHEN ICON STARTS OR STOPS. UNIT SHUTS DOWN BEFORE ICON PARAMETER IS REACHED. IF YOU HAVE MORE THAN ONE HOUR IN TROUBLESHOOTING AND DO NOT HAVE A GOOD DIRECTION TO FOLLOW FOR RESOLUTION, PLEASE OPEN A IKNOW CASE FILE. NO MODEL YEARS LISTED. *PE
TB-IK-0800172
INTERNATIONAL TRUCK: WRITTEN PROCEDURE IS TO SIMPLIFY AND CLARIFY THE OPERATION OF IMPROVING CAB CIRCUIT GROUNDS. SYMPTOMS ARE: CLUSTER LOCKUP; TRAILER ABS LIGHT; SWITCH PACK LIGHT FLASH; GAUGES DROPPING OUT; ALL THIS CAN CAUSE UNUSUAL ELECTRICAL ISSUES. NO MODEL OR MODEL YEARS LISTED. *PE
IK0800172
NAVISTAR: VARIOUS TYPES OF VEHICLES INCLUDING LONESTAR, PROSTAR, 8600, AND 7600 VEHICLES WILL NEED AN OPERATION TO IMPROVE THE CAB CIRCUIT GROUNDS. 7/17/15 *TA
AFC-08914
NAVISTAR: MISLOCATED TORQUE ROD BRACKET ON CERTAIN PROSTAR AND 9000 MODELS. REQUIRES AN INSPECTION TO DETERMINE IF THE TORQUE ROD BRACKET WAS MISLOCATED ON DANA 40K AND 46K TANDEM AXLES. MODEL YEARS UNKNOWN. *PE
TSI-08-05-02
NAVISTAR: POWER STEERING INTERMEDIATE SHAFT U JOINT END PLAY MEASUREMENT. *PE
TSI-08-05-01
NAVISTAR: PROSTAR POWER STEERING COOLER HOSES. *PE
IK-1900077
INTERNATIONAL TRUCK: AIR SOLENOID ISSUES ON TRUCKS BUILT AFTER 1/1/07. THIS APPLIES TO MODEL HPV AND PROSTAR 2008. SOME IR SOLENOIDS HAVE BEEN MISPACKAGED AND POSSIBLY THE SOLENOIDS THEMSELVES HAVE BEEN LABELED WRONG. *PE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.