IK2600083
Service Bulletin/Repair Instructions
The new clusters in the post-2007 models store the mileage in memory. When replacing the cluster, follow these instructions to program the current vehicle mileage into the memory of the new cluster.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IK2600083
The new clusters in the post-2007 models store the mileage in memory. When replacing the cluster, follow these instructions to program the current vehicle mileage into the memory of the new cluster.
IK1900240
This document will guide the user through the necessary steps to install the Pressure Transducer (PT) Switch Conversion Kit onto model year 2012 thru 2016 ProStar® and LoneStar®(Built prior to January 20,2015). This conversion is required to be performed during a A/C system failure in which the refrigerant system is opened.
IK2600090
New CARB Idle Reduction Change Request
IK4300035
This tool is designed to compare Diamond Logic feature data across multiple vehicle configuration files. It allows users to quickly load files either manually or directly from the Diamond Logic Builder Vehicles folder using VIN-based selection. As files are added or removed, the comparison runs automatically with no manual action required. The program presents results in an interactive table that shows feature codes, descriptions, access levels, and whether each feature is present in each selected file. Built-in search, filtering, and sorting make it easy to locate specific features or focus only on differences between files. Column visibility can be customized to show or hide descriptions and access information as needed. Users can remove files individually or clear all files at once, with results updating instantly. The tool also includes reporting and export options that reflect exactly what is visible on screen, allowing results to be printed, copied, saved as text, or exported to CSV for use in Excel or other spreadsheet tools. Overall, the program streamlines the process of comparing vehicle feature configurations, helping users quickly identify differences, validate setups, and document results without manual comparison or external tools.
IK2600255
This document provides guidance for assessing the feasibility of implementing a customer-requested change to an engine or vehicle parameter/feature. Customer requested changes will be approved in accordance with the requirements specified in 40 CFR Part 1037 to ensure continued compliance with greenhouse gas (GHG) regulations.
IK2600047
Engine replacements for all International engines will need to follow this procedure.
IK2600284
This document aims to enable technicians to: 1. Accurately identify third generation MaxxForce medium duty engine control systems. 2. Understand the programming intricacies related to these systems. 3. Autonomously execute programming tasks without needing technical support.
IK1600272
This document will guide the user through a step-by-step procedure for detecting water leaks in vehicle cabs and windshields using an ultrasonic sound detector.
IK2600279
This document provides: Steps to take when switch pack programming fails, or when switch pack disappears after body control module update Sample scenarios Additional information to assist readers in understanding DLB switch pack programming
IK1201009
In some geographic areas, ambient temperatures reaching below 40°F (4°C), including high levels of humidity, an operator may experience engine stalling, low performance, and/or poor aftertreatment performance. This is caused by condensation accumulating and freezing within the Charge Air Cooler (CAC); affecting air flow into the engine. This article lists currently available winter front covers that can be installed on the front grille and bumper to reduce cold air flow to the engine compartment.
IK1201252
This document describes the process for utilizing the CPA High Pressure Fuel Pump (HPFP) Test
IK0600030
This document will guide the user through understanding Prop Shaft Codes and understanding the variations of prop codes. (Metric Prop codes start with the number a 4 and Non metric Prop codes start with a 2.)
IK3400001
Title: Service Portal iKNow Feedback Case Types Applies To: All
IK1400005
Title: Driveline Information Center and Troubleshooting Procedures Applies To: All Vehicles
IK1900022
Title: A/C Refrigerant and Oil Capacities Applies To: All current models
IK0900157
Title: Fan belt replacement guidelines for frayed edges Applies To: All Models
IK1200716
Title: Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure Applies To: All Navistar Powered Trucks Requesting Engine Emission Label Replacement, Certificate of Conformance and/or Clean Idle Sticker, Clean Truck Check
IK0500054
Title: Steering Gear Seal Repair Guidelines Applies To: Steering gears
IK2600069
Title: How to Request a Horsepower Quote Applies To: All International and Cummins Electronic engines
IK0300078
This document reminds technicians of the critical relationship between the truck's suspension and the driveline operating angles. The information applies to diesel, gas, and electric vehicles.
IK0400125
02/26/2025 - Additional LT Part Numbers Added to Table
IK1400023
This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
IK0400037
This document is to guide users to eliminate brake pedal rattle noise.
IK08000403
This document details the procedure that must be followed to ensure proper alternator troubleshooting.
IK0800482
This document covers battery diagnostics, maintenance and storage requirement.
IK0200013
Suggested alignment target values when performing a vehicle axle alignment.
IK0800407
Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
IK0800351
J1939 Data Link Source Address Information
IK1201476
Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
IK0300010
Diagnosis of chassis wander complaints.
IK0400040
General Wheel Speed Sensor Troubleshooting
IKo800080
J1939 Data Link Troubleshooting
IK1201391
Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
IK1201466
New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
IK1201237
Turbocharger oil supply tube retrofit; only models with 2010 emissions MaxxForce 11 and 13 engines and N13 engines
IK1201472
Pico Scope CCOS (Crankcase Separator Test)
IK0800605
PicoScope Test 5V & 12V Intermittent Open and Short circuit diagnostics
IK0800607
PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
IK0800609
PicoScope Test for Datalink (CAN) Health Shorts & opens
IK0800610
PicoScope Test Resistance and Ohmmeter
IK0800611
PicoScope Wheel Speed Sensor Test
IK1201469
PicoScope Test One Channel RCT
IK1600133
Textured surfaces on painted plastic bumpers, chassis side skirts, and fender extendtions
IK1600136
Primer recommendation for matching textured panels to smooth panels for field repairs
IK1600131
Cab water leak troubleshooting tips; HX with steel cab only
IK2600052
Calculating pulses per mile (speedometer setting); only models equipped with International engines
IK1201464
High Pressure Fuel Pump external leaks from weep hole. only trucks with 2010 MaxxForce 11/13L, all N13, or A26 engines
IK0800080
J1939 Data Link Troubleshooting
IK1000003
Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
IK2600251
How to obtain As built parameter list
IK1201299
Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
IK1201458
Oil leaks at the Bottom of the Oil Filter Module; Only International A26, N13, or 2010 and newer 11 and 13 engines
21504
This VER will involve reviewing diagnostic codes, inspection of the EGR valve / EGR System, and may include EGR valve replacement. Only models with 2012 model year MaxxForce 13 engines and are registered in California or have California apportioned registration.
IK0700112
Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
IK1900259
Day cab roof air deflector causing loud vibration noise at highway speed
IK0500038
Steering Shake, Shimmy, Shudder, Wobble, Steering Vibration; only models built with 14K weight rated axles or lower
IK2600128
A26, N13, and 2010 EPA MaxxForce 11 and 13 engine Auxiliary Programable Parameters
IK1500074
Fuel Filters, Winter Additives, and Blending Fuels for Cummins® Engines
IK1600233
Cab Lean Concern
IK0800504
Repair Procedures for Vehicles Struck by Lightning
IK0800284
Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics
IK1201198
MaxxForce 15L Engine Oil Leaks; an aid in repairing engine oil leaks on the MaxxForce 15L engine.
IK1600186
Cab Odor Service Plan Information; only models equipped with EPA 2010 or later MaxxForce 11 or MaxxForce 13 engines
IK1600258
Cleaning and Disinfecting Trucks and Buses
IK0400159
Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
IK1900198
MaxxPower No Idle Battery-Powered A/C System Diagnostic Guide; Only sleeper cab models with feature code 16UZL
IK0800364
Stand Alone Real Time (SART) Module Diagnostics. Only 2010 and later models equipped with MaxxForce® 11/13/15 engines or N13 with feature 0508051
IK1500085
LT / ProStar Fuel Tank Unable to Fill; only sleeper models
IK0700097
NEW Ultrasonic DEF Head Unit; All SCR vehicles
IK0800444
Driver Information Display (VIS/DID) screen fails to boot up.
IK0800092
The First Check to make when Troubleshooting any Body Controller or ESC Issue
K1200716
Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
IK0800085
ProStar Electrical System Load Shed Feature 08XEV
IK1600207
Wind noise at upper side of cab door
IK0800503
ISB Starting System Diagnostics; Only models built with cummins ISB engines
IK0800059
Brake Lights Staying On
IK0800017
Programing New Key Fobs
59310-004
Hendrickson Assembly Instructions; Transverse Torque Rods
IK0800130
Air Pressure Gauges and A/C Pressure Transducer Troubleshooting
IK0800460
Build to VIN Wiring Harnesses
IK0300047
Improved Bushings for Hendrickson Torque Rods
IK0400077
FLR-10 Bendix Wingman Misalignment Issues; only models with Feature Code 08TKY Wingman FLR-10 Radars
4328530R1
Tool Instruction - BCM Programming Harness
IK0800475
Radio Diagnostics and Information
IK1900172
Espar Airtronic Heater Diagnostic Guide; only models with Feature code 16VTV
IK1900168
Fifth Wheel Jaw Unlock; only models with Feature 595BAW or 597017 - electronic Jaw release
IK1201119
Cummins ISX SCR System wiring
IK0800538
SCR Aftertreatment Harness Replacement
IK0900127
Heater Hose Chafing; Only models built with N13 engine
IK0800326
Auto Start Stop Troubleshooting; only ProStar with feature code 0008TSJ
Rec17V-792_2017-
The fire extinguishers may become clogged or require excessive force to activate. In certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. Only equipped with Kidde model FC5 and FC10 fire extinguishers identified by International part numbers 1696423C2 and 1696423C3 and installed post production at Navistar?s Truck Sales Processing Center (TSPC).
IK4300001
Updating OnCommand Link with Accelerator
IK1200921
ISX, N13, and N9 / N10 Aftertreatment Private Data Link Troubleshooting
IK2700100
OnCommand EZ-Tech
IK2500511
Using Supplier Software to Check DTCs
IK0800341
Trailer Auxiliary Switch Lamp Burning Out; Only Vehicles Equipped with Feature Code 0008TTH or 0008THG
IK0800508
SCR Chassis Overlay Instruction
IK0700096
Urea Quality Sensor (UQS) Supplemental Diagnostic and Service Information; only models with SCR Aftertreatment system and N9, N10, N13, A26 or Cummins ISB, ISL, ISX engines built from January 2016
IK0800546
HVAC fault 2609-19 with 4th Gen BCM; Only models equipped with 4th generation BCM
IK2900030
Dealer EZ-Tech and Diagnostic Software Support Resource Center
IK1201363
CPA Injector Misfire Detection; Only models with 2004 thru 2017 International engines.
IK0700079
SCR Vehicles Setting 3363-16 (FC1713) due to Crossed DEF Tank Coolant Lines or Inverted DEFTHV
IK1201360
Cylinder Performance Analyzer (CPA) Resource Center; Only models with 2004 thru 2017 International engines.
IK2700090
OnCommand EZ-Tech Download Center
IK0800333
Parasitic Battery Load and Predelivery Storage Recommendations
IK0800537
DM harness inspection; Only with Steering Column feature code 05710
IK0500058
Steering Fluids
IK1201248
Cooling System Flush Procedure
IK1600183
Offensive Odors Inside Cabin
IK1600116
Mirror / Map Light / Visor LED Lighting Up when CB MIC is Keyed
IK0800374
To Get A Helios Capture; All 1939 and 1708 multiplexed trucks only
IK1600222
POWER WINDOW BINDING
IK1100031A
HARD TO CRANK CONDITION ON VEHICLES WITH HYDRAULIC CLUTCH LINKAGE AND SOLO CLUTCH
IK0400140
AIR COMPRESSOR RETROFIT FOR PROSTAR MODELS EQUIPPED WITH 2010 EPA AND NEWER MAXXFORCE 11 & 13 ENGINES AND FEATURE CODE 04SPL
IK0400057
NEW BRAKE LIGHT OPERATION; PROSTAR AND LONESTAR WITH AIR BRAKES
REC16507
THE ON BOARD DIAGNOSTIC (OBD) DATA STORED FOR PURPOSES OF DEFINING REQUIRED MAINTENANCE OR REPAIR MAY BE INADVERTENTLY LOST WITHOUT NOTICE TO THE OPERATOR.
IK1200029
RADIATOR INTERNAL RESTRICTION AND FLUSH PROCEDURE
IK1600201
PROSTAR SLEEPER CAB STRUT NOISE OR AIR LEAKS
IK1900223
Air Conditioning Electrical Diagnostics
IK1900228
2010 and Newer Vehicle Air Conditioning Diagnostics (Start Here)
IK1201102
Low Coolant Switch Diagnostics with Cummins ISX
IK0800441
Adding an Electronic Trailer Brake Controller
TT7829EN
Tech Tip to aid technicians in the efficient removal and installation of a TC10 transmission
IK0400088
Brake Single Hot Wheel End Service Procedure
IK-1201314
PERFORMING RELATIVE COMPRESSION TEST AND MISFIRE TEST WITH CPA TOOL
IK-1200915
MISFIRE DIAGNOSTICS IBB; SPN132(X) - FMI 31
IK-1201320
IK1201320 - EGR SLOW RESPONSE DIAGNOSTICS; 2659 - 10
IK-1500051
IK1500051 - DAVCO FUEL PRO 382 TECHNICAL MANUAL, INSTALLATION, DIAGNOSTICS, AND SERVICE
IK-1201253
IK1201253 - EXHAUST MANIFOLD SERVICE PROCEDURES
IK-1201326
IK1201326 - SERVICE PARTS DAMAGED NEW TURBOCHARGER OIL SUPPLY TUBE
IK-1201157
IK1201157 - UPDATE FOR EXCESSIVE LUBRICATION OIL CONSUMPTION
IK1201323
ISX15 Aftertreatment Fuel Injector Replacement
15517
Accelerator pedal sensor (APS) recalibration
IK0800427
Active Faults During Load Shed
IK0900105
Retrofiting a Horton VMaster(Stratis) fan drive to Horton 2spd air operated fan drive on N13 or MaxxForce 13 engines
IK1900245
ESPAR D5 Hydronic Diagnostic Guide
IK0800414
Windows Stop Randomly or are Inoperative, Power Door Locks are inoperative
IK1900235
No-Idle HVAC Operational Check - STARTING POINT
IK1900239
Symptom 5: NoIdle HVAC Blows Warm Air
REC15V-607
The fifth wheel and its locking mechanism may be susceptible to cumulative damage resulting in the fifth wheel lock to function improperly or a failure of the locking mechanism to properly engage
IK1900080
VORAD VS-400 Side Display Inop
IK0700072
ISX Setting 3556-18 (FC3167), 5298-18 (FC1691), or 3482-2 (FC1925) Caused by Missing AFI Poppet
121602
Change in Seat Belt Manufacturer - Inspection and Replacements
IK1100031
Hard to Crank Condition with Hydraulic Clutch Linkage and Solo Clutch
IK0400144
Standard to Heavy Duty Brake Chamber Replacement
IK1600219
ESPAR Preventative Maintenance / Inpection
IK1900234
Symptom 1: No Idle HVAC Cools but Operates Incorrectly
IK1900237
Symptom 3: NoIdle HVAC Inoperative
IK1600023
Mirror Repair Procedures and Replacement Parts Availability
IK1201096
LT EGR Core Removal and Insertion with MaxxForce 11, 13, and N13 engines
IK1900158
Dash Cluster Lamp Operation, Functions and Regeneration Instructions, With International engines
IK1900212
Front Blower Motor Runs Breifly At Initial Power Up
REC15509
A jump start or electrical load dump event could result in an overvoltage condition of the cab Linear Power Module (LPM). The overvoltage condition could eventually cause overheating of the LPM circuit board.
IK0400146
N13, MaxxForce 11, 13 engine Two Cylinder Air Compressor Testing
IK0800296
HVAC faults 520211 and 520465
IK1100005
Eaton Clutch Information
IK1900218
ESPAR AirTronic Low Run Time.
IK0700032
DPF Snap Accel Test - Quick Test to All vehicles with DPFs
IK-0800414
INTERNATIONAL: INFORMATION REGARDING ISSUE WITH POWER WINDOWS FAILING TO OPERATE PROPERLY OR POWER DOORS FAILING TO LOCK OR WHEN WINDOW STOPS, BUTTON PRESSED AND WINDOW RESUMES OPERATION. MODELS TERRASTAR, DURASTAR, WORKSTAR, TRANSSTAR, PROSTAR AND LONESTAR. NO MODEL YEARS LISTED. *PE UPDATED 12/16/13. *PE UPDATED 12/18/13. *PE UPDATED 9/14/15 *CN
IK-0800465
NAVISTAR: STEERING WHEEL WILL NOT HAVE SHIFT CONTROLS DUE TO PHOENIX SHIFTER BEING PROGRAMMED TO LOOK FOR STEERING WHEEL MOUNTED SHIFT CONTROLS AND IF AN ERROR IS DETECTED, A FAULT WILL BE SET. MODEL PROSTAR. *PE UPDATED 9/14/15 *CN
IK1600217
Grille/Bug Screen Rubbing Against A/C Condenser
MIN15106
An incorrect terminal may have been installed on harness part number 4047811C91. This terminal does not allow the harness to be installed without modifying the harness.
IK1900225
Air Conditioning Mechanical Pressures Diagnostics
IK0900110
Coolant odor in cab with rear HVAC; equipped with Feature 0595BJN or 0595BWZ
IK1500005
Dual Fuel Tank Transfer Pump System With Two Wire Pump Troubleshooting; equipped with feature 595192 built after 08/19/2002
IK1500035
Dual Fuel Tank Transfer Pump Troubleshooting on Post-2007 NGV and ProStar
IK0400104
04SPL, MCAC 476, Yoosung, Compressor - Service Information
IK1500057
Davco Fuel Filter Replacements Recommendation for Maxx Force 11 and 13, 2010 Engines
IK1900207
HVAC Diagnostic Information
IK1201118
Charge Air Cooler Outlet Temperature Sensor Damaged; equipped with N13, MaxxForce 11, 13 engines
IK1900236
Symptom 2: No-Idle HVAC Fault Codes
IK1900238
Symptom 4: No-Idle HVAC Digital Display Inoperative
IK0400141
Trailer ABS In-Dash Lamp Stays On After A Trailer Has Been Disconnected; only with An In-Dash Trailer ABS Warning Lamp feature
IK0800485
Cluster Software Update Instructions
IK1900226
Air Conditioning Control Head Diagnostics
IK0800119
ProStar and NHPV with Suspension Dump feature code 595ACA or 595BBC
AFC 14907
MaxxForce 15 ECM recalibration to improve exhaust aftertreatment, Exhaust Gas Recirculation (EGR) valve, and oxygen sensor diagnostics, and to address problems with engine cold start.
IK1900233
No Idle HVAC Solution Parts Identification; only with feature 16UZL No Idle HVAC
IK1600210
Compressor Relay and Power Harness Upgrade; only with feature 16UZL No Idle HVAC
IK1900230
Rear A/C Blows Warm Air
IK1900231
Rear A/C Control Panel Inoperative
IK1900232
Sleeper Fan and Sleeper TEMP Switch Inoperative
MIN-14121
NAVISTAR: DIESEL EXHAUST FLUID (DEF) WILL FREEZE INSIDE PURGE PUMP DUE TO AFTERTREATMENT CONTROL MODULE (ACM) NOT RECEIVING BATTERY POWER (BATTERY DISCONNECT SWITCH), AND PURGE CYCLE FAILS TO COMPLETE, AFTER IGNITION KEY IS OFF. MODEL PROSTAR, WORKSTAR. *PE
AFC14904
TO ENSURE ENGINETORQUE PARAMETERS AR PROPERLY MATCHED TO SPECIFIED DRIVELINE; WITH ISX ENGINE AND FEATURE 06DDN DRIVELINES
IK0900087
TEMPERATURE RADIATOR DIAGNOSTICS
IK0800499
BATTERY DISCHARGE DURING EXTENDED STORAGE; PROSTAR EQUIPPED WITH FEATURE 0008WEN
IK-0900094
IK: REPAIR INFORMATION REGARDING THE MISSING OR LOOSE BOLT ATTACHING HORTON STRATIS ANTI ROTATION BRACKET (ARB) TO ENGINE. MODEL PROSTAR, WORKSTAR, LONESTAR. NO YEARS LISTED. *PE UPDATED 6/27/2014 *JS UPDATED 11/7/14. *PE UPDATED 1/30/15. *PE
IK1600202
COWL TRAY SEAL; ONLY BUILT PRIOR TO 11/11/2013
IK1900220
GEOTAB WITH WYE CABLE INSTALLATION
IK0800463
HIGH OR SPIKING VOLTAGE ONLY WITH LEECE-NEVILLE ALTERNATOR USING REMOTE VOLTAGE SENSE
IK0900094
Horton VMaster Ultra (Stratis) Viscous Fan Hub Diagnostics and Troubleshooting Guide
IK0400133
Collision Avoidance Wingman FLR-10 to FLR 20 Retrofit
IK-1100031
INTERNATIONAL: TRUCK HARD TO CRANK DUE TO CLUTCH BEARING CONTACTING CLUTCH BRAKE PRIOR TO CLUTCH RELEASE PEDAL PASSING MAGNETIC CLUTCH SAFETY SWITCH, ON SOME TRUCKS, CLOSING SWITCH ALLOWING TRUCK TO CRANK. MODEL PROSTAR, LONESTAR. *PE UPDATED 02/11/2014 *JS UPDATED 08/04/2014 *JS
IK0800185
Wipers and Aftertreatment Lights Inop on Post 2007 Trucks with Body Controller
IK1900015
Activate HVAC Front Blower Message In Dash Message center; with Sleeper cab only
IK-1201039
INTERNATIONAL: THERE ARE ISSUES OF MISSING COMPLETE ENGINE AIR SUPPLY LINE AND ALSO MISSING T FITTING WITH 1/4" AIR LINE TO AFTERTREATMENT PURGE AIR VALVE. *PE UPDATED 08/04/2014 *JS
IK1201039
Aftertreatment Purge Air Valve Air Supply Line Routing for both Cummins ISX SCR and N13 SCR Engines
IK1900019
Sleeper HVAC blower will not run on high with engine off; with Sleeper cab only
IK-0800426
IKNOW: FAULTS WITH ECM. WHEN EXPERIENCING ELECTRICAL FAULTS INSPECT THE CONNECTOR. *JS UPDATED 08/04/2014 *JS
IK0800426
Cummins ISX 15L with Multiple ECM Faults; SCR engines only
IK1300016
New Synthetic Oil for Eaton and Spicer Transmissions; only with Eaton or Spicer transmissions
REC14508
The mounting bolts that fasten the air disc brake caliper to the caliper anchor plate may have not been tightened to their specified torque; only with air disc brake feature codes 04WEY, 04WEZ, or 04WZK.
IK1300021
Transmission Keeps Shifting and Display Keeps Flashing After Ignition is Turned Off; only with Freedom Line Transmission
IK1300029
Roll Pins Backing Out of Bell Crank; Only with manual transmission
IK0500049
LUK/Ixetic Power Steering Pump Fittings; only Vehicles equipped with Maxxforce 11, 13 engines
IK0900030
In Chassis Cleaning Procedure for Cooling Package in All Models with MaxxForce 11, 13 Engines
IK0800478
Headlight Condensation or Frost; excludes sealed beam headlights such as on WorkStar, Paystar and 9900i)
REC14501
The S-Cam tube bracket assemblies on steer axles may exhibit fractures between the wing bracket and the steel tube when mounted to stamped spiders; with feature code 0504501, 0504504, or 0004EWM without feature code 0004WCS.
REC13517
During vehicle operation, the rear chassis skirt upper horizontal support S-bracket may contact the fuel tanks during frame twist, and it is possible for the bracket to wear a hole in the top of the fuel tank, which may result in a fuel leak.
IK1100004
Clutch Linkage Rattle
IK1100020
ZF Sachs Twin XTend clutch; only Vehicles with heavy-duty ZF Sachs Twin XTend Clutch
IK1600034
Rubbing Between Front and Rear Skirts on ProStar
IK1600049
ProStar Side Skirt Paint Mismatch
IK1600062
Push-in Trim Fasteners Popping out or Missing
IK1600063
Sleeper Curtain Getting Sucked into HVAC Duct
IK1600064
No Idle Curtains Missing Velcro; only models with feature 16UZL - No Idle HVAC
IK1600065
Sleeper Buzz, Squeak, Rattle
IK1600066
Drawer Rattle
IK1600067
Work Surface Rattle
IK1600095
Work Surface Latch Jammed - Replacement
IK0400033
Automatic Traction Control (ATC) Tire Size Compatibility; only with feature 04AZD and 04AZJ Bendix ATC
IK1600002
ProStar Air Deflector Mounting Procedure (Rattling Noise from Air Deflector or Bulging Between Fasteners)
IK0800442
Auxiliary Battery Box Cover Difficult to Remove; Only vehicles with Feature Code 0008XGG (auxilary battery box)
IK0700065
Ordering SCR Aftertreatment Parts for Vehicles With Navistar Engines
IK0700071
Ordering SCR Aftertreatment Parts for Vehicles Powered by Cummins Engines
IK1500002
Fuel Level Not Equal Between Tanks on Dual Draw Dual Return Dual Tank Systems.
IK1201067
MaxxForce 15L engine PayStar to ProStar Conversion
IK0800014
City Horn Blows When Driver Shuts off Truck and Walks Away; only equipped with with ESC or Body Controller
IK0800056
Retrieving Fault Codes Through the Cluster Doesn?t Work
IK0800196
Asterisk in Lower Right Quadrant of Dash Display
IK1200271
Remote Throttle Control Options for Vehicles with ESC?s or Body Controllers and International Engines
AFC13916
The powertrain harness is missing its backshell and may rub on the ECM bracket and damage the wires; only with MaxxForce 15 engines.
IK0800352
Body Controller/ESC Software Updates
IK0800064
Battery Drain ( Parasitic Drain) with Sleeper Refrigerator; only models with optional refrigerator
IK1500047
Filterminder Air Restriction Gauge Improvement; only models with 0016HKC, FILTER MINDER UNDER HOOD W/SWITCH
IK0800201
Disable Cummins Icon; Only models equipped with Cummins engine and with Icon installed.
IK0700002
Proper Exhaust Shield Orientation
IK0700041
Exhaust Bellows Damage; only models equipped with bellows exhaust pipe.
IK0900007
Ethylene Glycol Coolant Color Change to be Phased-In Approximately April 1, 2004
IK0900032
Phosphate Conditioner Required When Replacing Radiators; only models with EPA 2009.5, 2009.75 and 2010 MaxxForce 11, 13, 15 engines
IK0800398
SPN 1590 FMI 19 Adaptive Cruise Control Code; only Models Equipped with Wingman Feature Codes 08TKW or 08TPL.
IK-0700047
INTERNATIONAL: ON THE AFTERTREATMENT SUPPORT HANGER, THE HORIZONTAL AFTERTREATMENT SUPPORT ROD BOLT IS LOOSE OR BACKED OUT, DUE TO POSSIBLE WEAR AND NEEDS TO BE REPLACED, IF NECESSARY. *PE UPDATED 02/07/2014 *JS
IK0700047
Horizontal Aftertreatment Mounting Bolt Torque; only models equipped with MF 11/13 engines
IK0700059
DEF Tank Slow to Fill; only models with 2013 Cummins ISX 15L
IK-0800246
INTERNATIONAL: ON CERTAIN HEAVY DUTY TRUCKS, AN ISSUE WITH UP SHIFT AND DOWN SHIFT MANUAL MODE BUTTONS, THE SHIFT CONSOLE IS FLASHING WITH NO CODES, FOR THE STEERING WHEEL SWITCH ON RIGHT HAND SIDE. *PE UPDATED 02/07/2014 *JS
IK0800246
Manual Mode Button on the Eaton Shift Console is flashing with No Active Codes in the TCM. With Active Code 3655, 3654 or 3656 in the Body Controller; only models with Eaton Ultra and Auto Shift Transmissions
IK0800361
Bluetooth Stereo Adapter Infromation; only Bluetooth Equipped models
IK0800468
Dash Cluster Stuck in one mode
IK1600200
Sleeper Cab Strut Air Leak Detection; sleeper cab only
IK0400131
Bendix Wingman FLR- 20 alignment; only vehicles equipped with Bendix Wingman system
IK0800465
Ultrashift Shifter light flashes
AFC13917
Certain MaxxForce 13 engines may experience increase in engine RPM while idling (only while vehicle is parked or stopped).
IK1900182
Webasto Airtop 2000 ST D Service and Repair Manual; only with feature code 0016VSU
IK0400093
Bendix Wingman - unable to connect to ACB; only vehicles equipped with Bendix Wingman system
IK1600177
SkyRise Roof Replacement
IK-1600149
INTERNATIONAL (NAVISTAR): THE ADHESIVE PATCH, USED ON ONE PIECE SUNSHADE, FAILS, AND THE SUNSHADE MOUNTING BRACKET, USED ON MODEL DAY CABS, COMES OFF. *PE UPDATED 5/9/12 *JS UPDATED 05/07/13 *JS UPDATED 11/14/2013 *JS
IK0800037
Location of 1000 OHM Resistor In the HVAC Wiring
IK1200903
Deaeration Tank Hose Re-Route Engine Parameter Download Instructions; Only models marked with AFC12917
IK1200940
SCR Fluid Filter Replacement; only models equipped with Cummins ISX or Navistar N13 Diesel Exhaust Fluid System
MIN13113
Certain vehicles may have been built without the air line from air drier to engine purge valve fitting.
IK0800043
How to Add Lift Gate Battery Protection; only models equipped with Electronic System Controller (ESC) or Body Controller (BC).
IK0900075
Horton Stratis Fan Hub Diagnostics
TSI-131208
Aftertreatment Fuel Injector (AFTFI) Removal and Installation; onlt models equipped with MaxxForce 13 HD-OBD or N13 engines
REC13514
On vehicles with the electronic jaw release system, the airlines at the isolation/vent valve may not be oriented correctly to the valve ports at the time of assembly; only models built 20 February 2008 thru 29 July 2013 with feature code 0595BAW or 0595BAY.
IK0800047
Remote Power Module (RPM) Troubleshooting
TSI-131206
Deaeration Hoses, Upper Manifold Sub-Assembly, and Coolant Control Valve (CCV) Removal and Installation; only models equipped with MaxxForce 13 ED-HBD II or N13 SCR HD-OBD engines.
IK-0800427
INTERNATIONAL: THERE ARE CODE FAULTS, CAUSED BY LOAD SHEDDING, LOADED IN OTHER MODULES AND UNIT GOES INTO LOAD SHED AND FAILS TO HAVE POWER IN SWITCHES. MODEL PROSTAR, LONESTAR. NO YEARS LISTED. *PE
IK-1100021
INTERNATIONAL: INFORMATION IS BEING PROVIDED REGARDING THE PROCEDURES FOR THE ADJUSTMENT OF INTERNAL AND EXTERNAL HYDRAULIC CLUTCH ON SOME TRUCKS. NO MODEL YEARS LISTED. *PE UPDATED 12/16/13. *PE
IK0200011
Meritor Front Brake Return Spring Install
IK1100021
Hydraulic Clutch Adjustment for ProStar + Vehicles; only Vehicles with Hydraulic Clutch
IK0800446
Units with Auto Start/Stop Turn on after 15mins; Only models with Cummins ISX engine
IK0800418
Additional hardware is required when replacing Tail Light Assemblies from Truck-Lite to Weldon; only ProStar models with tail light part numbers 3707933C93 and 3707932C93
IK0500007
Adjustment Procedure for Tilt Only Steering Column; only models with Feature code 0005708
IK1900088
Wiper Troubleshooting
IK1600027
Cab Ride Height Specifications and Adjustment Procedures
IK1900205
Hood-Mounted Mirror Reinforcement Kit. Retired
IK-08000422
IKNOW: THE BATTERY CUBE FUSE STUD TERMINAL WITH THE ALTERNATIVE PART NEEDS TO BE REPLACED. SOME VEHICLES MAY EXPERIENCE A SHORTED FUSE BECAUSE THE INSTALLATION WAS IMPROPER. MODELS INCLUDE ALL PROSTARS (PRIOR TO SCR RELEASE) *JS
IK-0200021
IKNOW: ON SOME VEHICLES THE TURNING ANGLE MAY CAUSE A BENT OR BROKEN AXLE STOP BOLTS. *JS
IK-1900205
IKNOW: INSTALL KIT IN ORDER TO ALLEVIATE LOOSE, VIBRATING, OR RATTLING OF THE HOOD-MOUNTED MIRRORS. *JS
AFC-13913
NAVISTAR: TRANSMISSION COOLER LINES MAY MAKE CONTACT WITH WITH FRONT COVER OF ENGINE. COULD CAUSE TRANSMISSION FAILURES *JS
IK1900203
Troubleshooting & Resetting HVAC Doors; only 2010 and later vehicles with feature code 0016WCT.
IK0800425
Auto Start/Stop Feature, shut down Issue; only with Body Controller Feature 595BVG
REC13503
Certain 2010, 2011, and 2012 model year MaxxForce® 11 engines do not meet EPA emissions requirements.
IK0800139
Remote Engine Speed Control Module (RESCM) Troubleshooting; Only trucks equipped with RESCM
IK-0800425
INTERNATIONAL: ENGINE WOULD SHUT DOWN AFTER FEW MINUTES ONCE AUTO START/STOP BUTTON WAS ENGAGED AND IN DISPLAY WOULD SHOW IDLE SHUTDOWN LIGHT ON BEFORE SHUT DOWN. MODELS PROSTAR. MODEL YEARS NOT LISTED. *PE
IK0100016
Complaint of a new chassis with a frame bow; only chassis equipped with "dogbone" style crossmembers
IK1900208
Parts Lists for Maxx Power and Espar Anti Idle Systems; only models with Feature Code 0016UZL
IK-0400119
IKNOW: PROSTAR BRAKE ASSEMBLY CONVERSION. THE WELD MAY BE CRACKING IN THE STAMPED S-CAM TUBE BRACKET. THE STAMPED SPIDER BRAKE ASSEMBLY SHOULD BE CONVERTED TO A CAST SPIDER BRAKE ASSEMBLY. *JS
IK0400119
Brake Assembly Conversion - Stamped Spider Brake Assembly to Cast Spider Brake Assembly
MIN13108
Updated Emission Control Information and CARB Clean Idle Label; Only models with MaxxForce 11, 13, 15 engines.
IK0800424
Wingman DTC Report; onle vehicles equipped with Bendix Wingman system
SP-13503
NAVISTAR: EMISSIONS RECALL ON CERTAIN TRUCKS THAT DO NOT MEET EMISSIONS REQUIREMENTS AND NEED INSTALLED AN UPDATED ENGINE CONTROL MODULE (ECM) CALIBRATION TO BRING IT WITHIN SPECIFIED LIMITS OF CERTIFICATION. MODELS 2010-2013 PAYSTAR, PROSTAR, TRANSTAR, WORKSTAR WITH MAXXFORCE 11 ENGINES. *PE
AFC13910
Blower Motor Assemblies and Linear Power Module (LPM) Updates.
IK1600179
Interior door handle seal
MIN13105
Air Compressor Replacement for Certain Vehicles with MaxxForce 13 Engines.
IK-0800418
IKNOW: REPLACING TRUCK -LITE TAIL LIGHTS WITH WELDON TAIL LIGHTS. IF CHANGING FROM TRUCK-LITE TO WELDON FOR THE FIRST TIME ON A VEHICLE, TWO RETROFIT CONVERSION KITS SHOULD BE ORDERED. *JS
IK-1200431
INTERNATIONAL: THE AIR TEMPERATURE SENSORS, ON CUMMINS ENGINE, MAY BE MISTAKEN FOR GROUND CONNECTOR AND SHOULD REMAIN STRAPPED TO HARNESS AND NOT BOLTED, DUE TO BEING RELOCATED AT REAR, AND FRONT, OF CHASSIS. MODELS PROSTAR, LONESTAR, TRANSTAR. *PE
IK1600174
Updating Body Controller Software
AFC12947
The Doser tube coolant return hose assemblies and coolant hoses have been found to leak.
IK-0800415
INTERNATIONAL: THE TURN SIGNAL LAMPS AND HAZARDS FAILS TO ILLUMINATE AND/OR WORK PROPERLY. MODEL 2007 AND NEWER HPV, PROSTAR, LONESTAR. *PE
IK0800389
Troubleshooting Cruise Control Drop Out. Retired
IK0800411
Body Controller Resource Center
AFC13904
ECM and Body controller software update to provide engine protection against an increase in engine RPM while vehicle is idling (only in a parked state or if vehicle is not moving) and to prevent cruise control drop out; only models equipped with MaxxForce 13 engine. Retired
AFC13905
Body controller software update to prevent cruise control drop out. Retired
IK0800111
Inverter/Charger Power System
AFC13901
ECM Recalibration to provide engine protection against an increase in engine RPM while vehicle is idling (only in a parked state or if vehicle is not moving); Only models equipped with MaxxForce 13 engine. Retired
IK0800412
Headlight Operation and Troubleshooting; only Post 2007 Vehicles Built with a Body Controller
IK1600170
IKNOW: SLEEPER SIDE SILL/UNDERBODY CROSS-MEMBER WELD CHECK AND REPAIR. THE WELDS DESCRIBED HEREIN ARE NEITHER DURABILITY NOR SAFETY CRITICAL WELDS. *JS
REC12527
The tow hooks supplied with the vehicle used for emergency recovery purposes may have not been heat treated to the correct specification.
REC12529
The steering wheel armature may not have been welded properly to the steering wheel hub during the manufacturing process.
AFC12910
Exhaust Gas Recirculation (EGR) Valve Replacement; Only models equipped with MaxxForce 11 or 13 engines. Retired
IK-1600166
INTERNATIONAL: INFORMATIONAL PROCEDURES FOR REPAIRING CONNECTIONS FOR GROMMET PASS THROUGH DUE TO WATER LEAKAGE. MODELS TERRASTAR, DURASTAR, WORKSTAR, TRANSTAR, PROSTAR, LONESTAR. NO MODEL YEARS LISTED. *PE
IK0800366
Power Windows randomly stop
MIN12124
Engine Gear Train Inspection; only models equipped with MaxxForce 15 engines. Retired
IK1200634
Aftertreatment Resource Center; All models equipped with EPA 2007 and newer engines
IK0800310
Peoplenet Information; Only models equipped with Peoplenet option
IK0300004
Drive Axle and Steer Axle Air Suspension Ride Height Settings; only models equipped with Feature Code 03AZD and 03AZG, Hendrickson MaxxPower Front Air Suspension.
IK0800404
Circuit diagram for ProStar/LoneStar Fifth wheel; link to missing diagram.
REC12524
The piston in the spring brake chamber may in certain cases, cause internal air leakage in the chamber.
IK-0800389
INTERNATIONAL (NAVISTAR): THE CRUISE CONTROL WIRES, FROM SWITCHES, ARE MOMENTARILY SHORTED OUT WHEN TURNING OFF DUE TO STEERING COLUMN HARNESS RUBBING, REQUIRING A RESET EACH TIME. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE UPDATED 1/8/13. *PE
IK-1200828
INTERNATIONAL: INFORMATION PROVIDED IN REGARDS TO REPAIR PROCEDURES OF REPLACING DIPSTICK TUBE, IN NECESSARY, ALONG WITH BOTH P-CLAMPS AND THE DIPSTICK ITSELF. MODELS PROSTAR. NO MODEL YEARS LISTED. *PE
IK-0400110
INTERNATIONAL (NAVISTAR): PROCEDURES REGARDING THE REPLACEMENT AND INSTALLATION, ON CERTAIN TRUCKS, OF THE MGM MJ SERIES BRAKE CHAMBERS. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE
IK-1500067
INTERNATIONAL: INFORMATION REGARDING THE FUEL SYSTEM COMPONENTS AND REPAIRS TO CORRECT INTERFERENCE TO AVOID FUEL LINE CONTACT WEAR. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE
IK-0500043
INTERNATIONAL: INFORMATION BEING PROVIDED REGARDING THE RUSTING OF POWER STEERING HOSES THAT NEEDS TO BE REMOVED AND REPLACED. MODEL PROSTAR. NO MODEL YEARS LISTED. *PE
IK-0800382
INTERNATIONAL: BATTERY CABLES ROUTED TOO CLOSE TO SPRING HANGER SHACKLE BOLT FOR LEFT-SIDED BATTERY BOX OR 8600 BOC BATTERY BOX. MODEL PRO-STAR113 GARLAND BUILT. NO MODEL YEARS LISTED. *PE
IK-0800383
INTERNATIONAL: SPRING HANGER SHACKLE BOLT MAY HAVE BATTERY CABLES ROUTED TOO CLOSE FOR LEFT SIDED BATTERY BOX OR 8600 LSM BOC BATTERY BOX FOR EXCOBEDO BUILT PROSTAR 113. NO MODEL YEARS LISTED. *PE
IK-0800334
INCORRECT 5AMP FUSE AT LOCATION F11-D ON WABCO 6 SENSOR 6 MODULATER. *KB
AFC-11929
NAVISTAR: HVAC FRONT INSIDE MODULE DRAIN REPAIR. *KB
IK-0800326
INTERNATIONAL: ON SOME TRUCKS, AN AUTO START STOP FEATURE CODE 0008TSJ, ALLOWS PRESET VALUES IN BODY CONTROLLER, THAT ALLOW TRUCK TO START WHEN BATTERY VOLTAGE OR ENGINE OIL TEMPERATURE REACHES PRESET VALUE. MODEL PROSTAR. NO YEARS LISTED. *PE
AFC-12902
NAVISTAR: MAXXFORCE 11, 13, AND 15 RECALIBRATION TO ADRESS FREQUENT WARNING LIGHTS. *KB
IK0800172
NAVISTAR: VARIOUS TYPES OF VEHICLES INCLUDING LONESTAR, PROSTAR, 8600, AND 7600 VEHICLES WILL NEED AN OPERATION TO IMPROVE THE CAB CIRCUIT GROUNDS. 7/17/15 *TA
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.