13598
Other
New Vehicle Monitoring Programs Section in IVH
Vehicle report
2009 ISUZU F SERIES
Service bulletins
54 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PIC5650M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about vehicles that have an intermittent no crank, no start, or start stall concern with the security light coming on. Technician may find Diagnostic Trouble Codes B3055, B3060, B3935, C0750, C0755, C0760, C0765, and/or C0775.
PIP5601C
Service Bulletin/Repair Instructions
This PI communicates the requirement to provide a pico file to receive diagnostic assistance from TAC.
PIT5074R
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about the use of J-35616-64B and Mini 50 terminal test probe, replacement terminals, and terminated leads.
02-00-89-002X
Service Bulletin/Repair Instructions
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
PIT3271P
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
General Communication
Service Campaign
Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
01-00-89-010S
Service Bulletin/Repair Instructions
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
05-06-04-022V
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
04-06-04-051I
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
18-NA-099
Service Bulletin/Repair Instructions
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
08-07-30-035H
Service Bulletin/Repair Instructions
This bulletin provides information on the harmful effects of water or ethylene glycol in transmission fluid.
06-00-89-029V
Service Bulletin/Repair Instructions
This service bulletin includes information on Interior Cleaning - Instrument Panel (IP), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer - Product Availability.
10-08-110-001K
Service Bulletin/Repair Instructions
This service bulletin provides information on proper use of floor mats.
13-08-116-001J
Service Bulletin/Repair Instructions
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
15-00-89-004G
Service Bulletin/Repair Instructions
This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
03-00-91-001I
Service Bulletin/Repair Instructions
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns.
WB11-X-001A
Service Bulletin/Repair Instructions
The following information is provided to clearly explain Isuzuâs policy for control module (engine, transmission, antilock brake, instrument panel, body control, power interface, etc.) reprogramming. Control module calibrations are regularly updated for many reasons. These reasons may include, but are not limited to: model year change, software corrections, certification compliance, product improvement and specific application requirements. However, the mere existence of a newer control module calibration does not necessarily mean that warranty coverage exists or that the calibration must be installed. It is not our policy to update control modules, under warranty or after warranty, based solely on the availability of a newer calibration file. Below are our guidelines for reprogramming control modules.
PIT3271N
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
05-06-04-022T
Service Bulletin/Repair Instructions
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
06-00-89-031H
Service Bulletin/Repair Instructions
This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
13-08-116-001H
Service Bulletin/Repair Instructions
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
01-00-89-010Q
Service Bulletin/Repair Instructions
This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
22-NA-009
Service Bulletin/Repair Instructions
This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
04-06-04-051G
Service Bulletin/Repair Instructions
This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
10-06-05-002K
Service Bulletin/Repair Instructions
This informational bulletin provides information on Clean Exhaust Filter See Owners Manual Now or Cleaning Exhaust Filter Keep Driving Until Message is Cleared messages Displayed on DIC, DTC P2463 May Be Set.
WB13-X-001B
Service Bulletin/Repair Instructions
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
WB13-X-001A
Service Bulletin/Repair Instructions
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.
01-00-89-010P
Service Bulletin/Repair Instructions
This informational bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
22-NA-074
Service Bulletin/Repair Instructions
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
PIT3271M
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
PIT3271K
Service Bulletin/Repair Instructions
This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
IB08-X-002
Service Bulletin/Repair Instructions
ISUZU DIESEL ENGINES AVAILABLE IN THE ABOVE AFFECTED VEHICLES MEET THE CALIFORNIA AIR RESOURCE BOARD'S (CARB) OPTIONAL IDLING EMISSIONS STANDARD OF 30 GRAMS PER HOUR OF OXIDES OF NITROGEN (NOX) WITH NO INCREASE IN THE EMISSION OF OTHER REGULATED POLLUTANTS. AS A RESULT THESE VEHICLES HAVE BEEN APPROVED AS "CERTIFIED CLEAN IDLE" AND ARE "EXEMPT" FROM THE ENGINE SHUTDOWN SYSTEM (ESS) REQUIREMNET PURSUANT OT SECTION 1956.8 OF TITLE 13, CALIFORNIA CODE OF REGULATIONS. AS REQUIRED BY THE ESS REGULATION, FOR "CERTIFICED CLEAN IDLE" VEHICLES, ISUZU HAS INTRODUCED A TAMPER RESISTANCE "CERTIFIED CLEAN IDLE" LABEL LOCATED ON THE DRIVER'S SIDE DOOR PANEL. IT IS IMPORTANT THAT THIS LABEL REMAIN, PERMANENTLY, ON THE VEHICLE TO IDENTIFY IT AS "CERTIFIED CLEAN IDLE." CARB REQUIRES THIS LABEL AS EVIDENCE THAT, AT HTE TIME OF MANUFACTURE, THE ENGINE INSTALLED MET THE APPLICABLE EMISSION STANDARDS. SHOULD THE LABEL BE FOUND MISSING OR DAMGED DURING AN INSPECTION, A CITATION AND PENALTIES MAY BE ISSUED. IF THE VEHICLE IS OPERATED IN CALIFORNIA WITH A DAMAGED OR MISSING CLEAN IDLE LABEL, ISUZU RECOMMENDS VEHICLE OPERATORS FOLLOW THE 5 MINUTE ESS REQUIREMENT BY MANUALLY TURNING OFF THE ENGINE. FOLLOWING THIS ESS REQUIREMNET WILL KEEP THE VEHICLE OPERATION COMPLIANT UNTIL A REPLACEMENT LABEL CAN BE INSTALLED. "CLEAN AIR IDLE" LABELS ARE PRINTED WITH A SERIAL NUMBER AND REGISTERED TO AN INDIVIDUAL VIN. AS A RESULT, A REPLACEMNET LABEL WILL ALSO INCLUDE A NEW SERIAL NUMBER WHICH MUST BE REGISTERED TO THE VEHICLE'S VIN BY THE MANUFACTURER. THE BELOW INFORMATION IS PROVIDED TO ASSIT IN ACQUIRING, REPLACING AND REGISTERING A REPLACEMENT LABEL.
IB12-J-003E
Service Bulletin/Repair Instructions
PROPER INSTALLATION OF THE FUEL INJECTOR PIPES INTO A LONG BLOCK ASSEMBLY THE FUEL INJECTION PIPES SHOULD BE INSTALLED ONTO THE NEW LONG BLOCK ASSEMBLY AFTER FIRST INSTALLING THE COMMON RAIL. WHEN INSTALLING THE FUEL INJECTION PIPES, FOLLOW THE PROCEDURE BELOW TO ENSURE PROPER MATING OF THE FUEL INJECTOR HIGH-PRESSURE INLET, AND THE FUEL INJECTION PIPES. REFER TO THE APPROPRIATE YEAR AND MODEL SERVICE MANUAL FOR FURTHER INFORMATION REGARDING THE REPLACEMENT PROCEDURE.
060089029Q
Service Bulletin/Repair Instructions
This informational bulletin provides information on interior cleaning products and what is offered to clean the interiors of GM vehicles.
070849020M
Service Bulletin/Repair Instructions
IPC Odometer Programming Method Quick Reference Guide
150089004B
Service Bulletin/Repair Instructions
Information Regarding the Differences Between Fluid Leakage and Seepage This bulletin is intended to help identify the differences between what is considered a fluid leak and what is considered seepage. Improper diagnosis may lead to unnecessary component replacement. Use the following information to determine if the condition is normal acceptable seepage or a defective component
150089005A
Service Bulletin/Repair Instructions
Essential Tools that Include Consumable Parts (U.S. Only)
GCUS-3-848
Service Bulletin/Repair Instructions
44180 02 - Customer Satisfaction. Certain vehicles may have key codes which were inappropriately handled by a third party which could increase the risk of vehicle theft. Dealers are to replace all applicable keys and lock cylinders with new key configurations.
PIC5614A
Service Bulletin/Repair Instructions
Changing Turn-By-Turn Voice Response To Metric Or English Units
06-00-89-031D
Service Bulletin/Repair Instructions
OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
15-NA-079
Service Bulletin/Repair Instructions
OnStar® Voice Fallback Number Update Some customers may have received a letter from OnStar® stating that "We recently tried to provide a software update to the OnStar® hardware in your vehicle. However, your system could not be updated remotely. As a result, some of your OnStar® system functions may not be working as expected." The customer is further instructed in this letter to "Please contact your dealer or any dealer near you as soon as possible to schedule an appointment for this no-cost software update. Your dealer will reprogram your OnStar® module with an update. This is for vehicles that have previously received the Canada upgrade as described in Service Bulletin #15-08-44-001F."
PIT5074H
Service Bulletin/Repair Instructions
J-35616-64B Terminal Test Probe / Replacement Terminal / Terminated Lead.
PIT5099A
Service Bulletin/Repair Instructions
A/C Blows Warm Or Poor Performance.
PIT5264B
Service Bulletin/Repair Instructions
Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
PIT5319A
Service Bulletin/Repair Instructions
Bluetooth Stays Connected After RAP Is Canceled.
Recalls
Service Bulletin/Repair Instructions
Vehicle Recalls
1406130001
Service Bulletin/Repair Instructions
High Voltage Safety ? High Voltage Disabling
PIT4864F
Service Bulletin/Repair Instructions
Information On Requests To Add OnStar Bluetooth Option.
PIT5264
Service Bulletin/Repair Instructions
Canadian Customers Unable To Place Calls In The United States
99-08-51-007F
Service Bulletin/Repair Instructions
Refinishing Aluminum Wheels This bulletin updates General Motor's position on refinishing aluminum wheels. GM does not endorse any repairs that involve welding, bending, straightening o re-machining. Only cosmetic refinishing of the wheel's coatings, using recommended procedures, is allowed. Evaluating Damage In evaluating damage, it is the GM Dealer's responsibility to inspect the wheel for corrosion, scrapes, gouges, etc. The Dealer must insure that such damage is not deeper than what can be sanded or polished off. The wheel must be inspected for cracks. If cracks are found, discard the wheel. Any wheels with bent rim flanges must not be repaired or refinished. Wheels that have been refinished by an outside company must be returned to the same vehicle. The Dealer must record the wheel ID stamp or the cast date on the wheel in order to assure this requirement. Refer to Refinisher's Responsibility Outside Company later in this bulletin.
PI0281D
Service Bulletin/Repair Instructions
Underbody Component Corrosion The following information may be helpful when addressing underbody component corrosion with customers. Some customers may comment that one or more of their vehicle's underbody components are showing some form of corrosion. This corrosion may be red in appearance (rust) if the component is steel, forged iron or cast iron. This corrosion may also be grey or white in color if the component is constructed of an aluminum alloy.
130089008
Service Bulletin/Repair Instructions
GM Wiring Repair Strategy Information
1308116001A
Service Bulletin/Repair Instructions
Aftermarket ALDL or DLC Interface Devices Causing Multiple Issues
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.