Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
IB13-R-001G
This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under warranty. Contact Alpine directly for pricing and payment methods applicable to radio and component repairs not covered under warranty.
WB13-X-001B
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
WB13-X-001A
Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.
IB09-X-002B
The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite and Permatex.
IB09-X-004C
The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic support to Isuzu dealer technicians repairing Isuzu vehicles in and out of vehicle warranty. A TAC case number will be issued solely for information tracking purposes and future contact reference.
IB17J001
Understanding drive belt noise.
IB-14-X-001
ISUZU: INFORMATION REGARDING CORROSION INHIBITOR IMPROVEMENT THAT CHANGES COLOR OF COOLANT TO A DARK COLOR AND IS ADDED AT PORT TO BOTH RADIATOR AND SURGE TANK. *PE
050604035
USAGE OF E85 FUELS IN GM VEHICLES. 1997 - 2008 ALL GM CARS AND TRUCKS. 1997 - 2008 ALL SATURN VEHICLES. *TT UPDATED. *KB UPDATED ON 10/22/07. *NJ
030730035
REPLACEMENT OF OUTPUT FLANGE NUT WHEN SERVICING TRANSMISSION. ALSO INCLUDES 2004 MODELS. *TT
030604002A
VEHICLE NO-START IN EXTREME COLD. *TT
030730004B
REVISION OF AISIN TRANSMISSION QUALITY CENTER (TQC) PROGRAM BEGINNING OCTOBER 1, 2003. *TT
050601014
OIL LEAK UNDER EXTREME COLD TEMPERATURES (-34 DEGREES C) (-30 DEGREES F) OR COLDER). *TT
050604021
REVISED INSPECTION/MAINTENANCE (I/M) EVAPORATIVE EMISSION (EVAP) SYSTEM SET PROCEDURE. *TT
20040128
LOW ENGINE OIL LIGHT INOPERATIVE. *MJ
04031
INSUFFICIENT GROUND TO THE OIL PRESSURE SWITCH, PREVENTING THE ENGINE OIL PRESSURE WARNING LIGHT FROM ILLUMINATING WHEN THE VEHICLE IS STARTED AND WHEN THE ENGINE OIL PRESSURE FALLS BELOW NORMAL. ALSO INCLUDES GMC AND CHEVROLET W3500/3500 SERIES ISUZU AND NPR/HD 2004. *TT
030604033
REVISED DIAGNOSTIC TROUBLE CODE P0336. *TT UPDATE. TO INCLUDE 2004 ISUZU NQR COMMERCIAL MODELS. *TT
040525004
ELECTRONIC HYDRAULIC CONTROL UNIT (EHCU) REMOVAL PROCEDURE TO PREVENT BREAKING OFF HOLDING/LOCKING TABS. *TT
040730008
AISIN AUTOMATIC TRANSMISSION FLUID SERVICE REMINDER. 2005 ISUZU NPR/NQR INCLUDED. *TT
010604048
AVAILABILITY OF NEW FUEL INJECTION PUMP OIL SUPPLY PIPE FOR REPLACEMENT AFTER REMOVAL. *TT
02047
SUPPLEMENT TO 03-06-04-002 4HEI-TC DIESEL ENGINE - COLD WEATHER NO START. ALSO INCLUDES 2002, 2003 AND 2004 MEDIUM DUTY. *TT
030604066
THROTTLE POSITION SENSOR REPLACEMENT PROCEDURE. *TT
030604063
MI-TICS INJECTION PUMP EXCHANGE PROGRAM/WARRANTY GUIDELINES EFFECTIVE OCTOBER 1, 2003. *TT
030730060
AUTOMATIC TRANSMISSION OIL COOLER FLUSHING ON CERTAIN MEDIUM DUTY TILT CAB MODELS AND COMMERCIAL MODELS INCLUDING MODEL YEAR 2004. *TT
030730050
APPROVED AISIN AUTOMATIC TRANSMISSION ON-VEHICLE REPAIRS. 2004 MODELS INCLUDED. *TT
030604042
PROPER POSITIONING OF FUEL INJECTION PUMP PRIMER HANDLE AFTER USE. *TT
020730025B
HARSH SHIFTING, DELAYED UPSHIFTS WITH POSSIBLE CHECK TRANS LAMP ILLUMINATED, POSSIBLE DIAGNOSTIC TROUBLE CODE (DTC) 21 SET. TO INCLUDE 2004 MODELS. *TT
030730015
RELEASE OF NEW TOOLS FOR SERVICE: J 37228 - OIL PAN SEAL CUTTER, J 41736 - INSTALLER (REAR OUTPUT SHAFT SEAL) AND DT 46717 - REAR OUTPUT SHAFT SEAL REMOVER. *TT
99066F
SPECIAL POLICY ADJUSTMENT - SEQUENTIAL CENTRAL PORT FUEL INJECTION (SCPI) FAILURES IN CALIFORNIA ONLY. CERTAIN 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 S/T, M/L, C/K, G, P, W4/NPR MODELS. *TT
030604002
VEHICLE NO-START IN EXTREME COLD. *TT
020730025A
HARSH SHIFTING, DELAYED UPSHIFTS, POSSIBLE CHECK TRANS LAMP ILLUMINATED, POSSIBLE DIAGNOSTIC TROUBLE CODE 21 STORED IN TCM MEMORY. *TT
020730025
SUBJECT REGARDING HARSH SHIFTING, DELAYED UPSHIFTS, POSSIBLE CHECK TRANS LAMP ILLUMINATED, POSSIBLE DIAGNOSTIC TROUBLE CODE 21 STORED IN THE TRANSMISSION CONTROL MODULE (TCM) MEMORY. *TT
020867003
SOME 2003 AND PRIOR W-SERIES TILT CAB MODELS AND 2003 AND PRIOR ISUZU TILT CAB MODELS MAY EXHIBIT VIBRATION AND / OR NOISE WHILE DRIVING AT SPEEDS OF 72 KM/H (45 MPH) OR GREATER. *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.