9100900
Service Bulletin/Repair Instructions
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9100900
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
114044
D-25-15 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
114045
ID-25-11 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
08-298-26 REV. A
Instrument Panel Cluster (IPC) Blank XZ1 Warranty Extension Customers may experience the following: SYMPTOM: ● **A blank electronic vehicle information center (EVIC) in the IPC. No information is displayed for the fuel level, temperature gauge, odometer, outside temperature, PRNDL and optional digital speedometer Fig. 1. IMPORTANT! The analog speedometer and tachometer gauges continue to function normally Fig. 1**. This bulletin involves replacing the IPC.
16C Combo Rev3
EMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp 16C The instrument panel cluster on about 32,587 of the above vehicles may have an inoperable check engine/malfunction indicator lamp (CEL/MIL). (JT) vehicles: CEL/MIL and cargo lamp indicator function are swapped. (JL) vehicles: CEL/MIL will not turn on. The CEL/MIL in and of itself will not affect emissions. However, if there was an emission issue that would require illumination of the CEL/MIL, the customer would not be alerted. The vehicle would be non-compliant to the OBD II regulation.
08-298-26
Instrument Panel Cluster (IPC) Blank XZ1 Warranty Extension Customers may experience the following: SYMPTOM: ● A blank IPC display. No information is displayed for the speedometer, fuel level, temperature gauge, odometer, outside temperature and PRNDL. NOTE: The speedometer and tachometer continue to function normally. This bulletin involves replacing the IPC.
113809
ID-26-37 (XZ1) Instrument Panel Cluster (IPC) - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
113813
D-26-17 (XZ1) Instrument Panel Cluster (IPC) - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
113270
CORE – HEATER
113271
CORE – HEATER
112862
MOTOR - BLOWER WITH WHEEL
112863
MOTOR - BLOWER WITH WHEEL
112842
BOLT - HEX FLANGE HEAD
112856
HEATER - ELECTRIC COOLANT
112857
HEATER - ELECTRIC COOLANT
9100835
Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
S2623000040
Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
111760
MOTOR AND LINKAGE - WINDSHIELD WIPER
08-208-26 REV. A
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.
08-208-26
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
S2623000018
Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving.
18-044-26
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
16C Combo REV2
Emissions Recall 16C - Check Engine/Malfunction Indicator Lamp - Dealer Notification (Revision 2)
S2608000010
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
110607
LAMP - TAIL
110610
LAMP - TAIL
S1408000384 REV.J
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
110399
HANDLE - INSIDE RELEASE
110400
HANDLE - INSIDE RELEASE
S2621000003
Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
31-001-26 REV.A
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
110462
D-25-15 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110469
ID-25-11 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110429
Warranty Newsletter – Volume 12, Issue 2
110431
FCA Caribbean Warranty Newsletter – Volume 12, Issue 2
31-001-26
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
16C Combo REV1
EMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp Reference: 16C
S1408000384 REV.I
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2623000006
Washer Fluid Warning Lamp Illuminated When Reservoir Is Full
9100756
DO NOT REPLACE MULTIPLE SHOCKS UNLESS ALL ARE VERIFIED TO BE DEFECTIVE. Reference Master Tech article released in January 2026 for updated diagnostic and testing procedures. Master Tech link: https: //mastertech.playerlync.net/app/player/p2tQVm
9004281
Before replacing bluetooth speaker for not charging or battery is dead, please refer to SOL #S248A000019 - Jeep Bluetooth Speaker Does Not Charge
109223
BEZEL - INSTRUMENT PANEL
109224
DOOR - PASSENGER AIR BAG
16C Combo
Check Engine/Malfunction Indicator Lamp 16C
9100736
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only
108544
SWITCH - POWER WINDOW
108655
D-25-15 Rev. A Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
108657
ID-25-11 Rev. A Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
S1805000006 REV.B
ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE
S2509000009
Engine Oil Leak
105646
MODULE - STEERING CONTROL & COLUMN
9100670
Data collection required for all 2020-2026MY vehicles with 3.6L PSU engines during any of their first 3 engine oil changes. This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.
S2218000003 REV.B
Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
107418
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
02-002-25 REV. A
Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.
106352
SHOCK ABSORBER – SUSPENSION & SHOCKS - REAR
31-001-25 REV. B
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. A
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S2509000001 REV.B
Engine Rattle Noise
S2422000001 REV.D
Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
9100627
To inform dealers about the 850RE valve body PN: R8348504A connector: the original 16-pin connector included six pins that were not used in this application. To simplify the design, the connector has been optimized and updated to a 10-pin configuration.
9100624
Verify Reman part number availability. Order the "R" part number for all orders:
21-009-25 REV. C
850RE D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
S2208000138 REV.B
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
9100622
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
9100614
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
09-015-25
Spark Knock/Engine Symptoms Customers may experience the following: ● Knocking or pinging noise coming from the engine upon acceleration. This bulletin involves cleaning the piston heads and cylinder head combustion chambers to resolve a spark knock condition being caused by oil intrusion through the PCV system.
9100605
Shim - felt GIM # NUSENGCHR24018991: JL JT sun visor center support BSR. Add felt shim 68736674AA - 43MM OD x 10mm ID x 1mm thick.
104966
BEZEL & INDICATOR- GEAR SHIFT INDICATOR
02-002-25
Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.
09-011-25
Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise.
S2323000002 REV.A
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
105038
TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE
105039
TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE
9100498 Rev 3
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.
9100534 Rev 1
Transmission "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, visible ""glitter"" or debris in the pan and fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
9100570
Transmission Fluid Please note fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Visible "glitter" or debris in the pan does not justify complete unit replacements.
104558
FCA Caribbean Warranty Newsletter – Volume 11, Issue 4
104557
Warranty Newsletter – Volume 11, Issue 4
21-009-25 REV. B
850RE D Clutch Repair **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
S2523000024
Rear Defogger Solder Terminals Detached.
103524
TANK - FUEL
S2509000004
Misfire DTCs, Rough Idle, Valvetrain Noise
S2523000010 REV.A
Exterior Rear View Mirror Stained And Will Not Clean.
S2523000015 REV.A
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
9100534
Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback.
9100390 Rev 1
D Clutch Repair Kit For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback.
9100471
CANISTER Vapor -If an issue is detected with the Evaporative System Integrity Module (ESIM) Detector and not the Vapor Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM.
103986
D-23-04 Rev. H 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
103987
ID-23-03 Rev. I 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2509000002
Engine Noise
S2523000015
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
9100498 REV 1
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.
S2523000010
Exterior Rear View Mirror Stained And Will Not Clean.
S2509000001
Engine Rattle Noise
S2323000004 REV.A
Defogger Is Not Working. Terminal Detached From The Glass.
S2008000084 REV.C
Cluster Warning Lamp is on, Service 4WD Message
S228A000005 REV.E
Uconnect Box Error Message, With Active or Stored Cellular Antenna Open or Short Diagnostic Trouble Codes (DTCs)
9100498
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets).
S2521000001
Clutch Overheat, And/Or Service Transmission Illuminated. Diagnostic Trouble Code (DTC) P08A6 – Gear Lever Position Sensor System – Multiple Sensor Correlation, Set Only In 4Low.
21-009-25 REV.A
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear. This bulletin involves replacing the D clutch
S1408000384 REV.H
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
102384
EVAPORATOR - AIR CONDITIONING
9100470
FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule. If the Filter is restricted or blocked then replace the part.
21-009-25
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. **Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear.** This bulletin involves replacing the D clutch."
S1408000384 REV.G
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
101792
FILTER - AIR
101816
FILTER - AIR
21-039-24 REV. H
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch
S248A000019
Jeep Bluetooth Speaker Does Not Charge
102300
Warranty Bulletin D-23-04 Rev. G 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
102315
Warranty Bulletin ID-23-03 Rev. H 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2323000074 REV.A
Buzz Squeak Rattle (BSR) From Sound Bar Or Sport Bar Area.
S2423000050
Buzz Squeak Rattle (BSR) From Speaker Sound Bar At High Volume Level.
101684
COVER KIT - HOOD
101285
DAMPER - NONE
101613
FCA Caribbean Warranty Bulletin ID-23-10 Rev. A (XF1) Steering Damper – Select 2018 - 2020 Jeep Wrangler (JL), 2020 Jeep Gladiator (JT) and 2018 Jeep Wrangler (JK)
19-002-24 REV. A
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
101611
Warranty Bulletin D-23-09 Rev. A (XF1) Steering Damper – Select 2018 - 2020 Jeep Wrangler (JL), 2020 Jeep Gladiator (JT) and 2018 Jeep Wrangler (JK)
S2422000001 REV.C
Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
19-002-24
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
21-039-24 REV. G
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
S2423000045
Heated Steering Wheel Inoperative And Or Not Hot Enough.
101137
Warranty Bulletin D-23-04 Rev. F 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
101140
FCA Caribbean Warranty Bulletin ID-23-03 Rev. G 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
21-039-24 REV. F
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
21-039-24 REV. E
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
100774
SWITCH - HEADLAMP
100875
Warranty Bulletin D-23--04 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
100876
FCA Caribbean Warranty Bulletin ID-23-03 Rev. F 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
97802
SWITCH - HEADLAMP
21-039-24 REV. D
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
S228A000017 REV.A
Battery Drain Suspected or "Identified" From USB or Media Hub
21-039-24 REV. C
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
S2123000046 REV.B
Click Noise From Front End While Driving And Or Turning.
99659
WHEEL - STEEL
21-039-24 REV. B
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
99885
WARRANTY BULLETIN D-23-04 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. D)
99887
FCA Caribbean Warranty Bulletin ID-23-03 Rev. E adds 2024 model year vehicles and updates the Collision Service Bulletin number
S2403000002
Griding/Gear Clash From Transfer Case When Going Into 4WD, Above 5 mph (8 kph).
31-001-24
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
99500
CARRIER – PLANETARY & SHAFT KIT - OUTPUT
9100390 Rev1
D Clutch Repair Kit TSB 21-039-24 REV A - D-Clutch repair kit missing Carrier Output Shaft Seals It has been identified the Carrier Output Shaft is missing 2 seals for some of the kits delivered to dealers. These seals are not available individually. MOPAR is working to get the parts. Do not rebuild the transmission without these seals otherwise the vehicle will not have reverse. Please refer to STAR Online Publication S2421000001 for instructions for inspecting if the seals are present on the Output Shaft Carrier Shaft. If seals are missing, please return the D-Clutch Kit as defective and order another kit. Transmission replacement is not recommended as this issue should be solved with replacement kits
S2421000001
No Reverse And/Or Forward Gear After D-Clutch Repair.
9100390
D Clutch Repair Kit TSB 21-039-24 REV A - D-Clutch repair kit missing Carrier Output Shaft Seals It has been identified the Carrier Output Shaft is missing 2 seals for some of the kits delivered to dealers. These seals are not available individually. MOPAR is working to get the parts. Do not rebuild the transmission without these seals otherwise the vehicle will not have reverse. Please refer to STAR Online Publication S2421000001 for instructions for inspecting if the seals are present on the Output Shaft Carrier Shaft. If seals are missing, please return the D-Clutch Kit as defective and order another kit. Transmission replacement is not recommended as this issue should be solved with replacement kits.
08-160-24
Management Procedure for Customer Issues in Connected Services Customers may experience the following: ● Various Connected Services issues. The purpose of this informative Technical Service Bulletin (TSB) is to support the Network on the following topics: ● Discern the different kinds of connected service issues (onboard / offboard). ● Support the customer in his journey to open a request via Customer Care. ● Address on the correct actions to properly manage a customer complaining about the received assistance.
S2423000033
Water Leak From Front Door. Water On Front Floor.
08-149-24
12V Battery Low Level Charge Notification On Customer’s Mobile Application Vehicle's 12V battery Low Level Charge notification on customer’s mobile application.
S1408000384 REV.F
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100360
SWITCH Power Window Before replacing the window switch, please follow these steps: 1.- Review the master window Switch for any physical issue (Button stuck, broke). If not, physical issue is found move to next step 2.- Make sure all the switches harness are properly connected, disconnect the switch and reconnect it, and reverify the issue. If after performing these steps the switch remains faulty, please replace the switch
94006
WIPERUNIT - WINDSHIELD WIPER, BLADE - FRONT WIPER
98861
WIPERUNIT - WINDSHIELD WIPER, BLADE - FRONT WIPER.
21-039-24 REV. A
D Clutch Repair Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
S1723000037 REV.A
Freedom Panel Underside Rough And Or White Coating Flaking
23-041-24
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
S2423000029
Water Leaking Near Front Bulkhead Or Cowl Area On Driver’s Side.
21-039-24
D Clutch Repair Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch.
9100010
Axle Assembly Do not replace the Axle for Axle Locker Sensor failure. The parts kit (SENSOR KIT, Axle: 68544629A$) must be used to repair the Axle Locker Sensor on JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). Internal axle components are serviceable. Complete axle assemblies should not be replaced unless necessary due to damaged housing. Over repairs may be subject to chargeback.
94519
HEADLAMP
S2307000002 REV.A
Suspected Engine Coolant Leak
S2208000063 REV.A
Loss Of Power Steering Assist. U0131 Lost Communication With Electro Hydraulic Power Steering Control Module (EHPS).
98051
Warranty Newsletter – Volume 10, Issue 4
98060
FCA CARIBBEAN WARRANTY OPERATIONS NEWSLETTER VOLUME 10, ISSUE 4
S2423000001
Rear Cab Silencer Trim Panel Servicing.
S238A000028
Radio Black Screen, Freezing, Reset, Cutting Out Or Inoperative Intermittently
0300224
Front and Rear Axle Sensor Kit **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? C1451-11 - Service Axle Locker System** Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition.
0802024
Floor Console USB Inoperative Customers may comment on the following: ? Customer states the Apple Carplay/Android Auto? does not work or is intermittently working when their device is plugged into the center console bin USB port. This replacing the center console USB cable.
S248A000001
SOS and Assistance Call Not Working After Radio Exchange Unit Installed
S1408000384
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100276
Spring Front Upr - Isolator Before replacing this part. Please contact FCA REDACTED CONTENT. ~ If no response in 15 minutes, proceed with repair.
S2309000013
Verifying Camshaft Diagnosis
9100244
FRT DOOR HINGE - DOOR CHECK If the front door check strap physically breaks or cracks, please call FCA Redacted Content. If no response in 15 minutes, proceed with repair. Please take pictures of the broken part and email the pictures to FCA Redacted Content.
S1808000057
Inspecting And Disconnecting Negative Battery Cables On ESS Vehicles
S2309000006
Engine oil leak
9100229
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
S2323000073
Exterior Mirror And Or Blind Spot Inoperative.
9100226
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
S2323000074
Buzz Squeak Rattle (BSR) From Sound Bar Or Sport Bar Area.
S2221000003
8-Speed Transmission, Additional Transmission Fluid Leak Inspection/Repair Guidelines.
S2319000007
Squeak Noise From Dash Area When Turning The Steering Wheel.
S2323000071
Front Door Window Will Not Roll Down All The Way. Window Stops Part Way Down.
9100212
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
9100209
Switch-Mirror Before replacing this Switch, please follow the service procedures to properly diagnose it 1) Remove the switch 2) Please check the continuity on each pin of the switch based on the table found in the service Procedures. If after testing switch is still faulty, please call FCA Redacted Content. If no response after 15 minutes, proceeds with switch replacement.
S2307000002
Suspected engine coolant leak.
93023
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
93120
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
S238A000042
Media Hub USB Connection Drops, Or Apple CarPlay and Android Auto Inoperative.
S1919000004
U0131-00-LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE ?A?. Service Electric Power Steering Message On Cluster.
S2008000031
Low Charging Voltage Displayed On Cluster
S2108000093
Apple CarPlay Does Not Work Or Not Connecting
Reference26A2
Customer Satisfaction Notification 26A - Right Rear Axle Shaft
9100196
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
ZD7
Customer Satisfaction Notification ZD7 - Radio Software update
9100185
ELECTRIC HYDRAULIC POWER STEERING PUMP Prior to replacing this component for damage at the pump electrical connection, please contact FCA redacted content. If no response in 15 minutes, proceed with repair.
2308323
Sunvisor Rocking or Loose One or both sunvisors rocking or are loose This bulletin involves adding foam pads to both sunvisor body mounts.
92177
Warranty Bulletin D-23-04 - 2018-2023 (Current) Jeep Wrangler (JL) and 2020-2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. B)
91872
Warranty Bulletin D-23-09 (XF1) Steering Damper - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
S2325000006
Customer complaint may include a MIL-on or check engine lamp on condition.
ReferenceZD7
Customer Satisfaction Notification ZD7 - Radio Software Update
0814023
Radio Over The Air JR34.41F Updating to JR34.42F Software Version ? Mobile WiFi inoperative upon start up. ? WiFi hotspot gives ?No Internet? connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from JR34.41F to JR34.42F. NOTE: The National campaign for this FOTA update launched July 5, 2023.
BulletinA
Customer Satisfaction Notification ZD7 - Radio Software Update
0700723
Water Quality When Mixed With Engine Coolant
S238A000024
SOS, Assistance Calls Not Successful After Radio Replacement or Radio Software Update
9100142
Mirror
1804823
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
S2307000001
Customer complaint may include a coolant leak, or, a coolant leak is detected during a routine oil change inspection.
9003357A
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9003357a
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
89211
Warranty Bulletin D-23-04 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. A)
89216
International Warranty Bulletin ID-23-03 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. A)
S228A000028
Radio Remained On After Ignition Is Switched Off, Dead Battery From Excessive Radio Current Draw
9003357
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
0804523
Radio Over The Air Updating to 34.42 Software Version ? Mobile Wi-Fi inoperative upon start up. ? Hotspot gives 9No Internet9 connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 34.4 to 34.42.
2302023A
Corrosion on Door, Hood And/or Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim (Fig. 1) .Zinc Shim
2302023a
Corrosion on Door, Hood And/or Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim (Fig. 1) .Zinc Shim
89079
Warranty Bulletin D-23-04 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
3100123
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
2302023
Corrosion on Door hood Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim. (Fig. 1) .Zinc Shim
08-038-23
Radio Over The Air JR34.3 Updating to JR34.32.Software Version Customers may experience one or more of the following: Not be able to use Mobile Wi-Fi upon start up. Hotspot gives a no Internet connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from JR34.3 to JR34.32. NOTE: National launch for this FOTA update is expected to begin February 20, 2023.
08-022-23
Radio Over The Air Updating to 40.12 Software Version Mobile Wi-Fi inoperative upon start up. Hotspot gives 9No Internet9 connection message on phone when trying to connect to a device. This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from 39.5 to 40.12.
S2323000004
Defogger Is Not Working. Terminal Detached From The Glass.
S2323000002
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
08-003-22 REV. A
UAQ and UCQ Radio Enhancements Customers may experience one or more of the following: ? **Wi-Fi hotspot connection failure. ? Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. ? Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** ? Intermittent, black radio display screen (Rear View Camera (RVC) not affected). ? Intermittent, radio freezes (RVC not affected). ? Wireless connectivity pairing and/or connection issues. ? Lost radio presets. ? Radio channels change by itself. ? SXMT icon inoperative. ? SXMT favorite song not displaying/playing. ? Incorrect navigation address/location/directions. ? Backup camera has black display screen or only displays Check Entire Surroundings with black screen (occurs when vehicle is shifted immediately to reverse upon key-on before RVC signal is received, recoverable with key cycle) . ? High pitch chime noise. ? Contact list not loading. ? Device not supported message. ? Remote app inoperative. ? Travel-Link fuel price incorrect. ? Backup camera gridlines missing. ? Unable to adjust volume. In addition, the following enhancement are included in this update: ? Enables map updates. ? Heavy Duty (HD) Truck USB HUB improvements. ? HD Truck heated steering wheel improvements This bulletin involves inspecting and if required, updating the radio software level to 40.1. Depending on the radio?s current software level the radio may need a one or two USB update.
31-002-22
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
0821422
Radio Over The Air Updates to JR34.3/JR34.4 and JR34.41
0818022
Radio Enhancements Software Level 1848.34 This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following:Radio display screen flickers. Clock loses 6 seconds per day (JL with 5 inch screen). Ghost Touch issue, features, modes and App?s change without drivers input (does not affect rearview camera). Wireless connectivity pop noise. Pop message ?SXM Wait? displayed for extended period of time. The radio resets.
0901222
Spark Knock/Engine Symptoms This bulletin involves cleaning the piston heads and cylinder head combustion chambersto resolve a spark knock condition being caused by oil intrusion through the PCV system. The customer may describe a knocking or pinging noise coming from the engine upon acceleration.
S2223000063
Ambient Temperature Sensor Servicing.
S2003000001RevE
Noise From The Front Axle Area Over Bumps
S2008000103RevA
No Start, Stop Start Inoperative, Battery or Check Engine Light (CEL) Illuminated
3100122
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
S228A000017
Battery Drain Suspected or "Identified" From USB or Media Hub
S2223000054
Washer Inoperative, Weak Or No Spray. Low Washer Indicator May Be Illuminated.
0300322
Front or Rear Axle Sensor Kit
S2008000075RevA
No Start, Start Stop Inoperative, Cluster Message Service Start Stop System
S2208000138
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S228A000004RevB
Panasonic VP4R Wi-Fi New Enrollment Pause
S1908000122RevA
Air Bag Warning Lamp On, Service Air Bag Message Displayed On Cluster
2302422
Headlamp Condensation Clearing Procedure This bulletin is to communicate the procedure for headlamp condensation clearing.
S228A000004RevA
Panasonic VP4R Wi-Fi New Enrollment Pause
9004472
complete wiring harness Before replacing this harness, please check for an available connector repair kit at the following: http://connectors.dcctools.com/home.htm;jsessionid=C6A3F1B696B030953878BF34FE86A8FE If a connector repair kit is not available on the website contact FCA Redacted Content to see if an alternative repair kit is available for your application prior to ordering the harness. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S228A000004
Panasonic VP4R Wi-Fi New Enrollment Pause
18-048-22
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0300 - Multiple Cylinder Misfire. If DTC P0300 is present either alone or along with other DTCs listed within thisbulletin the right intake camshaft MUST be replaced along with this software update (only if DTC P0300 is present). Refer to the detailedservice procedures available in DealerConnect>Service Library under: Service Info>09 - Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation>Right.If just the software flash was done without the right intake camshaft being replacedthe DTC P0300 may reoccur. If DTC P0300 is not present but other DTCs on this list below are present, performjust the software update. P0441 - EVAP Purge System Performance. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: Pinging/detonation sound from the engine after warm up at 1000-1500 RPM at low speed. The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
S1908000197
Low Tire Pressure Lamp Warning Lamp Illuminated, DTC?s C1501-96, C1502-96, C1503-96, C1504-96
S2019000005RevB
U0131 Lost Communication With Power Steering Control Module A DTC Active Or Stored. EPS Light On.
S2209000004
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
S2208000085
No Start, ABS Module Has No Communication, Stop/Start Inoperative
S2223000029
Rattle Noise From Door
S2208000073
No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
S2208000075
Check Engine Light Is On, No Start. DTC?s P00FD, P0562, P26F3
1804822
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0300 - Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within thisbulletin the right intake camshaft MUST be replaced along with this software update (only if DTC P0300 is present). Refer to the detailedservice procedures available in DealerConnect>Service Library under: Service Info>09 - Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation>Right. If just the software flash was done without the right intake camshaft being replacedthe DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, performjust the software update. P0441 - EVAP Purge System Performance. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
S1708000118
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
S1708000118 RevB
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
S2208000068
?Device Not Supported? Message on the radio screen
9004465
AXLE, Service Rear A new parts kit (SENSOR KIT, Axle: 68544629AA) is available to repair the Axle Locker Sensor on the 2018 - 2022 JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). This new parts kit must be used when only the Axle Locker Sensor fails.
S2224000002
AC does not blow cold
Y68 Combo
Emissions Recall Y68 PCM Software Update
08-003-21 REV. A
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed, this may lead to undesired handling characteristics. The customer may describe one or more of the following: Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2123000079
Wind Noise And Or Water Leak From Door Seal Area
05-006-21
Rear Caliper Adapter Bolts Are Loose Or Missing This bulletin includes replacing all four rear caliper adapter bolts if loose or missing. Customers may comment on one or more of the following:Click or clunk from the rear of the vehicle. A missing or loose rear brake caliper adapter boltFig. 1.Missing And Loose Caliper Adapter Bolts
Y53 Combo
Customer Satisfaction Notification Y53 Sunbonnet Top
S2108000204
Radio Lockup In The Software Installation Screen After Accepting FOTA Update (Incorrect "S2008000204" indicated on published document)
04-001-21
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
S2108000198
Media Device Connection Guidelines For Bluetooth, Apple CarPlay, Android Auto Or USB To The Radio Head Unit
S1918000008
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
S1918000008RevC
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
08-133-21
UAQ and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to: 39.6.The repair procedure must be followed step by step. If the radio is not updated with the correct software level at the correct time the radio can be damaged. If the radio was damaged by not following the repairprocedure the radio may need to be replaced. Customers may experience one or more of the following: Lost radio presets. SXM favorite song not displaying/playing. Radio display screen is black, intermittent. Radio freeze intermittent. Incorrect navigation address/location/directions. Bluetooth pair or connection issue. Radio channel change by itself. SXM icon inoperative. Backup camera has black display screen. High pitch chime noise. Contact list not loading. Device not supported message. Remote app inoperative. Travel-Link fuel price incorrect. Backup camera gridlines missing. Unable to adjust volume. In addition the following enhancements are included: Heavy Duty (HD)Truck USB HUB improvements. HD Truck heated steering wheel improvements.
Notification Y53
The mesh and solid sunbonnet tops listed on the Monroney label on about 1,229 of the above vehicles were inadvertently swapped during vehicle build. Therefore, a customer ordering a solid sunbonnet top received a mesh sunbonnet top, and vice versa. This can lead to customer dissatisfaction.
S2108000172
Stop Start Feature Is Inoperative, MIL Lamp On, Hood Switch DTC?s
S2108000170
Head unit button stuck DTC code B14DA-2A
S2108000163
No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
S2109000004
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
1900221
Noise In Steering Column Tailshaft When Turning Steering Wheel This bulletin involves inspecting and replacing the steering column if necessary. The customer may notice the following: A noise coming from the tailshaft of the steering column while turning.
S2023000017RevA
Whistle Wind Noise From Windshield Area.
S2108000153
Stop Start Inoperative, Cluster Message To Service Stop Start, AC Inoperative
S2123000049
RHD Glove box cannot be fully opened
S2125000002
Customer complaint includes a Mil-on condition. Upon further investigation, one or more of the following fault codes may be set in the PCM:
S1809000007
Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007RevC
Customer Complaint May Include Engine Oil Leak Or Consumption
S2123000048
Wind Whistle Noise From A Pillar Area At Highway Speed
S2123000047
UGDO Homelink Universal Garage Door Opener
S2008000059RevB
Error Code 20 Message On the Radio Screen
S2123000046
Click Noise From Front End While Driving And Or Turning
9004386
WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S2008000059RevA
Error Code 20 Message On the Radio Screen
S2108000098RevB
Radio Screen Freeze, Blank Screen And Reset
2302021
Front Passenger Outer Seat Bolster Foam is Collapsed This bulletin includes repositioning the passenger outer seat bolster and installing a strap and push pin to help prevent this concern from happening again. Customers may comment on the following: The front passenger outer seat bolster cushion is missing
S2108000132
ACC (Adaptive Cruise Control), FCW (Forward Collison Control) FFCM (Forward Facing Camera Module), DASM (Driver Assistance System Module) Does Not Calibrate
S2108000127 Rev.
Radio Reboot Continually
S2108000127-1
Radio Reboot Continually
S2108000127REVA
Radio Reboot Continually
S2108000127RevA
Radio Reboot Continually
S2108000130
Bubbles Or Delamination On The Radio Display
9004376
PUMP, Vacuum Prior to replacing the vacuum pumps, please contact or email FCA Redacted Content. If no response in 15 minutes, proceed with repair.
9004376 Rev. A
PUMP, Vacuum Prior to replacing the vacuum pumps, please contact or email FCA Redacted Content. If no response in 15 minutes, proceed with repair.
9004376-1
PUMP, Vacuum Prior to replacing the vacuum pumps, please contact or email FCA Redacted Content. If no response in 15 minutes, proceed with repair.
S2108000127
Radio Reboot Continually
S2118000009
Customer complains of a MIL-on condition. Upon further inspection, there is a Diagnostic Trouble Code (DTC) P0128 Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature) set in the PCM.
24-007-21
Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
2400721
Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
S2108000120
Radio Volume Uncontrollable Or Changing On Its Own
S2108000118
Power Mirrors Are Inoperative
S2108000098
Radio Screen Freeze, Blank Screen And Reset
S2108000098 Rev.
Radio Screen Freeze, Blank Screen And Reset
S2023000011
Wind Noise And Or Gap At Front Door Mirror Flag
S2023000011 Rev.
Wind Noise And Or Gap At Front Door Mirror Flag
08-079-21
Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe one or more of the following:Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. Brakes may intermittently apply unexpectedly together with IPC warnings. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(Japan and South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.
0807921
Flash: Driver Assistance System Module (DASM) Enhancements This bulletin involves reprogramming the DASM with the latest software available. The customer may describe one or more of the following:Instrument Panel Cluster (IPC) warnings for the Forward Collision Warning (FCW) informing the driver to apply the brakes. Brakes may intermittently apply unexpectedly together with IPC warnings. The following software enhancements are also available:Allows customers to turn off the FCW indefinitely, rather than resetting to ?ON? at each key cycle(Japan and South Korea only). System improvements to enhance the FCW system hazard detection which may reduce nuisance actions and warnings from incorrectly identified structures and hazards, which can in rare circumstances cause an unwarranted brake event.
S1708000118 Rev.
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination After Key Off
08-055-21 REV. A
Key FOBIK Shortage and Restriction This bulletin is to inform customers, FOBIKs will be on restriction due to a temporary semi conductor shortage. Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
08055211
Key FOBIK Shortage and Restriction This bulletin is to inform customers, FOBIKs will be on restriction due to a temporary semi conductor shortage. Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
S1608000226
Battery Tester Warranty Code Procedures, Midtronics Charger Update Process
S2008000113
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S2008000113 Rev.
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S16080002261
Battery Tester Warranty Code Procedures, Medtronic Update Process
S1821000001
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
9004307 Rev. A
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available.
9004307A
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available.
9004104
Valve Cover & Gasket Engineering is looking for information on the Pentastar valve cover due to gasket oil leaks. Please review the valve cover for a white paint dot/mark directly between the 2 cam actuators on the front of the valve cover. If found, please contact the following engineers for further information FCA Redacted Content, or FCA Redacted Content If no response in 15 minutes, proceed with repair.
08-055-21
Key FOBIK Shortage and Restriction This bulletin is to inform customers, technicians and sales staff that vehicles are being delivered with only one key FOBIK due to a temporary semi conductor shortage. The customer may notice that they only have one key FOBIK when the vehicle was delivered or need an additional key FOBIK due to a lost or damaged keyFOBIK.Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
0805521
Key FOBIK Shortage and Restriction This bulletin is to inform customers, technicians and sales staff that vehicles are being delivered with only one key FOBIK due to a temporary semi conductor shortage. The customer may notice that they only have one key FOBIK when the vehicle was delivered or need an additional key FOBIK due to a lost or damaged keyFOBIK.Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
S2123000022
Steering Damper Mounting Information
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9004307
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available. On some 2021 vehicles, they will be sold with only one FOBIK, and will have sales code ?GXZ?. For these vehicles a CSN (Customer Satisfaction Notification) will be released to replace the FOBIK once supply is available. A unique part number will be used for this campaign. For these vehicles, only order a replacement FOBIK in a vehicle down situation. Due to the global shortage, once service inventory of this part is depleted, there may not be any additional parts available for service for an extended period of time. This may cause customer dissatisfaction and extended vehicle down time. We appreciate everyone?s consideration and cooperation to only order this part in a vehicle down situation.
S2123000020
A Buzz, Squeak, Rattle (BSR), Clicking Noise Heard From Left Side Of The Freedom Top.
S1809000007 Rev.
Customer complaint may include engine oil leak/consumption.
S2108000080
Radio Replacement Reset Routine, Radio Has Missing Icons Or Are Grayed Out
S1924000008 Rev.
Front Defrost Only Clears Part Of The Windshield
S1924000008RevA
Front Defrost Only Clears Part Of The Windshield
S1908000092 Rev.
Reverse Camera System Unavailable And Blue Screen Showing On Radio Display
S1908000092ReVA
Reverse Camera System Unavailable And Blue Screen Showing On Radio Display
S2124000004
A/C does not cool and vehicle is low on Freon charge but no leak is found with sniffer or black light anywhere in the system
S2003000001 Rev.
Noise From Front Axle Area Over Bumps
S2003000001ReVD
Noise From Front Axle Area Over Bumps
S2123000015
Creak Tick Pop Noise From Door Or Doors
S1821000005 Rev.
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
S1821000005RevA
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
18-024-21
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs).P0300 - Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within this bulletin the right intake camshaft MUST be replaced along with this software update (only if DTC P0300 is present). Refer to the detailedservice procedures available in DealerConnect>Service Library under: Service Info>09 - Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation>Right. If just the software flash was done without the right intake camshaft being replaced the DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, perform just the software update. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafe speed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
1802421
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs).P0300 - Multiple Cylinder Misfire.If DTC P0300 is present either alone or along with other DTCs listed within this bulletin the right intake camshaft MUST be replaced along with this software update (only if DTC P0300 is present). Refer to the detailedservice procedures available in DealerConnect>Service Library under: Service Info>09 - Engine, 3.6L / Cylinder Head / Camshaft, Engine / Removal and Installation>Right. If just the software flash was done without the right intake camshaft being replaced the DTC P0300 may reoccur.If DTC P0300 is not present but other DTCs on this list below are present, perform just the software update. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafe speed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
08-030-21
Flash: Drivetrain Control Module (DTCM) Updates This bulletin involves reprogramming the DTCM with the latest available software. The customer may request to have the feature enabled which adds the ability to lock the rear axle differential, while 4-HI Off Road+ mode.
0803021
Flash: Drivetrain Control Module (DTCM) Updates This bulletin involves reprogramming the DTCM with the latest available software. The customer may request to have the feature enabled which adds the ability to lock the rear axle differential, while 4-HI Off Road+ mode.
9004017
CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order.
S2108000045
Favorite Song On-Air Alert List Empty
S2108000047
Jeep Off Road Pages Missing Latitude And Longitude Coordinates
S2108000036
Drive Configuration Changed After A Recent Service Repair
S2019000005 Rev.
U0131 Lost Communication With Power Steering Control Module A DTC Active. EPS Light On.
S2019000005RevA
U0131 Lost Communication With Power Steering Control Module A DTC Active. EPS Light On.
S2119000001 Rev.
Click Pop Creak Noise While Turning Steering Wheel
S2119000001RevA
Click Pop Creak Noise While Turning Steering Wheel
08-015-21
Radio Enhancements This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following:Radio display screen flickers. Radio resets with RPM less than 1000 RPM (DT and JL with 3.0L Diesel). Clock loses 6 seconds per day (JL with 5 inch screen). Ghost Touch, features, modes and App?s changing without drivers input. Bluetooth pop noise. Pop message ?SXM Wait? displayed for extended period of time. The radio resets.
S2023000041 Rev.
MOPAR Trailer Brake Accessory Kit And Instructions
S2108000023
Blind Spot Sensor Light Operate Sporadically And Indicates False Detection Without Any DTC
71838
Warranty Bulletin D-18-16 Rev. B Mopar Windshield Made With Corning Gorilla Glass (Rev. B)
S2119000001
Click Pop Creak Noise While Turning Steering Wheel
S2123000003
Buzz Squeak Rattle From Floor Dash And Interior Items
S2008000031 Rev.
Low Charging Voltage Displayed On Cluster
9004342
WINDSHIELD Windshield cracked or blemish. When customer comes in for a cracked windshield, please note the location of crack and take pictures before repair. Please send pictures to FCA Redacted Content or load to the warranty claims system.
S2123000002
Exterior Rearview Mirrors Inoperative And Or Intermittent Operation.
08-003-21
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed, this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S1908000083 Rev.
Check Engine Light Illuminated, Stop Start Function Inoperative
08-102-20
Flash: Anti-Lock Brake System (ABS) Module Updates This bulletin involves reprogramming the ABS module with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following Diagnostic Trouble Code (DTC) has been set: B1783-01 - Stop Lamp Control - General Electrical Failure. The customer may also comment or note that the DTC set after the installation of a Mopar or an aftermarket trailer brake controller.The 12 volt back feed of the aftermarket trailer brake controller into the redundant connection between the Body Control Module (BCM) and the Anti Lock Brake Module (ABS) is causing a design intent diagnostic detection of the stop lamps.Software enhancement includes:Removal of the warning lamp associated with this DTC so an aftermarket trailer brake controller can be used.
08-074-20 REV. F
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S1908000102 Rev.
(Rev. A) Audio Mute On All Sources Except AM
08-074-20 REV. E
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following: Steering wander. Vehicle has a lead/pull to the right or left. The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering/Linkage/Damper, Steering/Removal and Installation.
0807420E
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
9004331
Mopar Trailer Brake Controller Disregard ADH sales code reference in I-sheet. Optional harness 82216416A$ referenced in I-sheet is used for Wrangler only without factory trailer tow.
08-074-20 REV. D
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
0807420
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2023000041
MOPAR Trailer Brake Accessory Kit And Instructions
S2008000172
Radio Screen Flickering When Using Apple CarPlay Or Android Auto.
S2008000158
Check Engine Light (CEL), No Crank, Cluster Shows Not In Park (Vehicle Still Able To Obtain Park) Due To Terminal Push Out (TPO) Of The XY230A Inline Connector
31-002-20
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100220
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
08-074-20 REV. C
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
0807420REVC
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2008000161
Satellite Radio Not Working
9004309
GEAR, Power Steering When installing this gear refer to published service information. The power steering pump software must be updated, and vehicle configuration updated to ensure proper steering feel.
S1908000214 Rev.
Bluetooth Speaker External Charger
S1908000214RevA
Bluetooth Speaker External Charger
14-001-20
Fuel Tank Replacement - P0461: Level Sensor Performance This bulletin involves diagnosis and if necessary replacing the fuel tank and O-ringdue to a P0461 Diagnostic Trouble Code (DTC). Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P0461 - Fuel Level Sensor 1 Performance. In addition, the customer may notice one or more of the following:The fuel gauge is not accurate. The fuel gauge is stuck.
1400120
Fuel Tank Replacement - P0461: Level Sensor Performance This bulletin involves diagnosis and if necessary replacing the fuel tank and O-ringdue to a P0461 Diagnostic Trouble Code (DTC). Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the followingDiagnostic Trouble Code (DTC) has been set:P0461 - Fuel Level Sensor 1 Performance. In addition, the customer may notice one or more of the following:The fuel gauge is not accurate. The fuel gauge is stuck.
18-053-20 REV. B
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following Diagnostic Trouble Codes (DTCs).P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following: The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
S1921000007 Rev.
(Revision A) Engine Restarting On Stop/Start Event Without Releasing The Brake Pedal, EVIC Displays Shift To P Then Desired Gear, D on PRNDL Flashing
08-074-20 REV. B
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S1821000006 Rev.
(Revision A) Oversized Tire Calibration For Customized Jeep Wrangler, Gladiator, 2019 Ram Heavy Duty DJ, MVP Update Required, MVP Hotline
9004303
CONTROL UNIT, Door (Tailgate) Prior to ordering this part, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
S2008000146
AC Does Not Blow Cold
08-074-20 REV. A
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustain steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
68427
D-20-12 Service Bulletin 08-074-20 - Jeep Wrangler (JL) and Jeep Gladiator (JT) - Improved Steering Feel
S2008000141
Navigation Shows Incorrect Location
9004285
Rear Seat Structure and Seat Kit Part Numbers For concern of folding seat back compartment cover will not lock. Please contact FCA Redacted Content prior to repair. If no response within 15 minutes, proceed with repair.
08-080-20
UAQ and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 34.2. Customers may experience one or more of the following:Radio screen goes black. Voice Recognition (VR) call contact name not recognized. In addition, the following software enhancements are also available:Bluetooth improvements. Navigation improvements.
S2008000136
Passenger Air Bag Disable Lamp On Flashing When PADL Switch Is Connected
18-053-20 REV. A
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs.P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafe speed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
1805320REVA
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs.P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafe speed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
S2008000130
Radio UConnect GPS Based Trip Computer Missing
9004292
TRANSFER CASE ASSY For concern of transfer case input seal leak at main lip seal. Call FCA Redacted Content to confirm if T-case should be sent back to QEC.
9003637
USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
08-074-20
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This service bulletin repair will NOT correct a sustain steering shake, shimmy or vibration. If this repair is performed on a vehicle with those symptoms, that will cause a dissatisfied customer and a repeat visit to the dealer.
9004282
PAN AND FILTER, Transmission Oil / GASKET, Oil Pan Prior to replacing the transmission oil pan or replacing the oil pan gasket for a leak in the oil pan area, please contact FCA Redacted Content. The CST will review root causing steps and suggest if the part is required to be returned back to FCA.
S2008000106
No Crank, No Start Intermittently
S1808000284
Power Mirrors And Door Locks Do Not Function. Blind Spot Alert Temporarily Unavailable Is Displayed On The EVIC
S2008000094
Uconnect Market Place APP Fatal Error Message
S2008000103
No Start, High Current Fuse Array (HCFA) Location And Testing
18-053-20
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs.P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the softwareupdate.In addition the customer may notice one or more of the following: The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
1805320
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs.P0300 - Multiple Cylinder Misfire. P258B - Electronic Vacuum Pump Performance. C1252-92 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will now be P025A - Fuel Pump Module Control Circuit Open after the softwareupdate.In addition the customer may notice one or more of the following: The Anti-Lock Brake System (ABS) light illuminates. The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
S2023000036
Front Seat Lift Handle Binding
S2008000010
Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
S2008000093
Blind Spot Or Park Assist Warnings, False Activation
S2008000075
No Start, Start Stop Inoperative, Cluster Messages to Service Shifter or Service Start Stop System
S2018000008
Engine Surge Feel and/or Diagnostic Trouble Code P0299 ? Turbo Underboost Condition After Updating The Powertrain Control Module (PCM) Software. (ETL, ETM, ETN Engines)
S19080000047
Volume Uncontrollable Or Stuck On High
S1908000047
Volume Uncontrollable Or Stuck On High
S2008000086
Reverse Camera Trailer Hitch Zoom Feature Not Available
S1908000102
Audio Mute On All Sources Except AM
S2008000084
Cluster Service 4WD Light On
S1821000006
Oversized Tire Calibration For Customized Jeep Wrangler, Gladiator, 2019 Ram Heavy Duty DJ, MVP Update Required, MVP Hotline
S1721000016
Service 4wd Light On, Message AWD System Service Required
W45
Customer Satisfaction Notification W45 Front Axle Bracket
65710
Safety Recall W12 JL/JT Clutch Update to Dealer Instructions for Parts Ordering
S1821000005
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
S1909000002
Customer complaint may include an overfilled engine crankcase after an oil change.
S2023000025
Tonneau Cover Appearance
S1925000008
Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes (DTCs) P20E8 ? Reductant Pressure Too Low and/or P208B ? Reductant Pump 1 Control Performance Set.
9004257
FILTER KIT, Engine Oil When refilling oil on a JT, JL, DT, or RU equipped with a 3.6L Pentastar UPGRADE engine, please be advised that the engine oil capacity is 5 quarts of oil.
S1908000101
Remote Phone App Does Not Communicate With Vehicle Radio
23-015-20
Disinfectant Solution Recommended for COVID-19
S2008000059
Error Code 20 Message On the Radio Screen
S2008000060
Radio Issues With iPhone 11
S2025000004
Customer complains of the MIL lamp on. Technician observes DTC P0456 EVAP System Small Leak or P0455 EVAP System Large Leak detected set in PCM.
21-034-20
Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience the following condition:A loud whistle noise upon engine start up.
S2008000048
Phone Contacts Will Not Load
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
18-039-20
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
S2019000002
Hands On Steering Wheel Message In EVIC
08-046-20
Body Control Module (BCM) Reconfigure for Central Vision Processing Module (CVPM) This bulletin involves Restoring Vehicle Configuration in the BCM. Customers may notice the following condition:Two zoom buttonsFig. 1appear on the Rear View Camera (RVC) screen.
9004252
COVER KIT, Tonneau-Folding For concern of folding Tonneau Cover appears warped or does not sit flush on the bed rails or tailgate. Prior to ordering a replacement tonneau cover, please call FCA Redacted Content.
D-20-05
Jeep Gladiator (JT) - All Models and Model Years Equipped With Truck Hero, Inc. Mopar Components - Warranty Coverage
S2024000004
Customer Indicates Vehicle Has Poor Air Flow Through Demister (Side) Dash Vents
S2008000045
Apps Or Icons Grayed Out
S2008000036
No Start, HVAC Control Panel Illumination Flickers
S2008000038
Front Fogs Lamps Flicker Or Do Not Turn On Intermittently
W17
Customer Satisfaction Notification W17 Missing Side Steps
S1908000208
Satellite Radio Inoperative Radio Has Code B156B-13.
S2024000002
WiTECH HVAC Actuator Calibration Test Reserved Tab.
S20230000017
Whistle Wind Noise From Windshield Area.
S2025000002
Customer complaint includes check engine/MIL light on. Upon further inspection, fault codes will be found in the powertrain control module (PCM) for P0441, P0443 or P0449. Fault codes may be either active or stored.
S2003000001
Noise From Front Axle Area Over Bumps
08-021-20 REV. A
Body Control Module (BCM) Reconfigure for Enabling the Selectable Tire Fill Alert (STFA) Settings This bulletin involves reconfiguring the BCM to enable the STFA settings.This re-configuration will enable the STFA (sales code LA5). Customer does not have Selectable Tire Fill Alert due to a late feature availability.Selectable Tire Fill Alert (STFA) Function: (https://www.youtube.com/watch?v=znqYo86deCg)
08-022-20 REV. A
Flash: Body Control Module (BCM) Enhancements This bulletin involves updating the Body Control Module (BCM) with the latest available software. Customer does not have Selectable Tire Fill Alert due to a late feature availability.Selectable Tire Fill Alert (STFA) Function: (https://www.youtube.com/watch?v=znqYo86deCg)
D-20-02 Rev. A
DIPAP Requirements - Addition of Jeep Wrangler (JL/JK) and Jeep Gladiator (JT) Hard Top and Targa Top Panel Replacements - All Dealers (Rev. A)
9004223
BATTERY, Auxiliary (180 AMP) Mopar Engineering has reviewed the BBAUA180AA battery due to concerns over fitment in Chrysler, Jeep®, Dodge & Ram vehicles and has provided direction on usage. BBAUA180AA CAN BE USED in the following vehicles equipped with stop/start technology: ?MP ? Jeep Compass ?JL ? Jeep Wrangler ?JT ? Jeep Gladiator ?RU ? Chrysler Pacifica RU NOTE: Modify the BBAUA180AA battery positive mold cover by trimming 3mm of rubber on left side & bottom. ?WK ? Jeep Grand Cherokee ?WD ? Dodge Durango WK/WD NOTE:A vent kit is being created now and will replace the existing tube with a longer one and add an elbow to it for routing (availability is TBD).
9004224
LAMP, Tail (w/Blind Spot Detection) Blind Spot Sensor (68416989A$) can be serviced separately, if needed. Refer to Service Library and parts catalog for details.
S2008000013
Key Programming, Security Pin Request, Pin Invalid
S1805000006
ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE
S2023000012
Wind Whistle Noise From Glove Box Area Above 35 MPH
23-011-20
Rubicon Front Seat Back Panel Loose This bulletin includes inspecting, reattaching and if needed replacing the front seat back panel(s). Customers may comment on the following:Front seat back panel is loose. Front seat back panel fell off. Gap between the seat back and seat assembly,Fig. 1. Gap Between Seat Back and Panel
08-021-20
Body Control Module (BCM) Reconfigure for Enabling the Selectable Tire Fill Alert (STFA) Settings This bulletin involves reconfiguring the BCM to enable the STFA settings.This re-configuration will enable the STFA (sales code LA5). Customer does not have Selectable Tire Fill Alert due to a late feature availability.Selectable Tire Fill Alert (STFA) Function: (https://www.youtube.com/watch?v=znqYo86deCg)
08-022-20
Flash: Body Control Module (BCM) Enhancements This bulletin involves updating the Body Control Module (BCM) with the latest available software. Customer does not have Selectable Tire Fill Alert due to a late feature availability.Selectable Tire Fill Alert (STFA) Function: (https://www.youtube.com/watch?v=znqYo86deCg)
08-023-20
Flash: Tire Pressure Monitor Module (TPM) Enhancements This bulletin involves updating the (TPM) with the latest available software. Customer does not have Selectable Tire Fill Alert due to a late feature availability.Selectable Tire Fill Alert (STFA) Function: (https://www.youtube.com/watch?v=znqYo86deCg)
23-009-20
Loud Scraping or Clunking Noise From the Front Suspension This bulletin involves inspecting and possibly replacing one front coil spring. Customers may experience the following:A loud scraping, bump or clunking noise from the front suspension when going over bumps.
D-20-02
DIPAP Requirements - Addition of Jeep Wrangler (JL/JK) and Jeep Gladiator (JT) Hard Top and Targa Top Panel Replacements - All Dealers
23-006-20
Front Splash Shield Contacting Tire This bulletin involves replacing both the left and right front splash shields and rivets. Customers may experience one or more of the following:One or both of the front splash shields are rubbing on the tires while driving over 88 kph (55 MPH), or with strong cross winds. Rattle noise can be heard from either front wheel area while driving.
08-124-19
Radio Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Ghost Touch, features, modes and App?s changing without drivers input. Bluetooth pop noise. Pop message ?SXM Wait? displayed for extended period of time. The radio resets.
9004184
TAILGATE OPENING - WINDOW ASSY Before replacing this part, please send pictures of defect/issue to asim.mohammed@fcagroup.com. If you have any questions call Asim @ (248) 296-1629.
9004066
WIRING KIT, Enclosure (Mopar JL hard top conversion accessory kit) The HVAC control panel requires replacement when GTP sales code is present to restore rear defrost function. The switch is not provided in this kit and a service replacement part must be ordered. See service information procedure for switch replacement and below chart for replacement part numbers. vehicle has GTP+BNH+HAA replace HVAC control with pn 6BE36TRMAC vehicle has GTP+BNH-HAA replace HVAC control with pn 6BE37TRMAC vehicle has GTP+HAA-BNH replace HVAC control with pn 6BE40TRMAC vehicle has GTP-HAA-BNH replace HVAC control with pn 6BE41TRMAC Please ensure that the proper color code is used in place of the part TRM designation. For any questions call John Altsman at (248) 512-9361.
9004175
LATCH, Folding Top For a concern of a loose latch in the closed position, it is not necessary to replace the latch unless broken. Refer to instructions in service library. The position of the receiver attached to the vehicle header can be adjusted to change the ammount of force required to latch.
19-002-19
Shimmy In The Steering Wheel After Hitting An Irregularity On The Road Surface This bulletin involves discussing an available video instructing the technicians on how to properly diagnosis and repair this issue.
1900219
Shimmy In The Steering Wheel After Hitting An Irregularity On The Road Surface This bulletin involves discussing an available video instructing the technicians on how to properly diagnosis and repair this issue.
18-055-19 REV. A
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs.P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
1805519
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs.P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P1404 - EGR Close Position Performance. P1206 - Fuel Pump Control Module Open Circuit To Fuel Pump. Upon diagnosing the vehicle the technician may find DTC P1206 set before flashing the vehicle, the correct DTC will nowbe P025A - Fuel Pump Module Control Circuit Open after the software update.In addition the customer may notice one or more of the following:The customer may notice an ability to shift into 1st gear at an unsafespeed(MTX Only). Cluster displays "Autopark Engaged" even when autopark is no longer active.
VA5
Customer Satisfaction Notification VA5 ? Spray-In Bedliner
18-089-19
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
1808919
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
9004150
SEAL, Input If looking to replace stubshaft due to ATX fluid leaking, do not replace PTU seals. None of the seals from the PTU side will need to be replaced whenever the ATX stubshaft is replaced, even though V-seal (68408748A$) is in direct contact with the stubshaft, it will not avoid grease/oil leakage from transmission side. PTU V-seals are intended to act as a dust cover for stubshaft - PTU input shaft spline interface. PTU Input shaft seal (68408749A$) is intended to hold PTU oil and debris ingress; it should be replaced only if the fluid leakage is confirmed to be PTU oil and not ATX trans. fluid.
23-028-19
Sun Visor Bracket Rattle or Squeak Noise This bulletin involves inspecting the sun visor and if needed, removing and tightening the sun visor bracket attachment screws to specification. Customers may comment on the following:One or both of the sun visors squeak or rattle(metal to metal noise)when moved into desired position(s).
23-023-19
Front Splash Shield Contacting Tire This bulletin involves replacing both the left and right front splash shields and rivets. Customers may experience one or more of the following: One or both of the front splash shields are rubbing on the tires while driving over 88 kph (55 MPH), or with strong cross winds. Rattle noise can be heard from either front wheel area while driving.
9004116
HANDLE AND CABLE, Seat Release If you have a 2 door JL with EZ entry handle that is loose or appears broken follow the procedure below. Mounting bracket has grease present which may have damaged plastic part. Please call Adam Rose (586) 804-4315) for cleaning procedure prior to replacing any parts. If no response in 15 minutes, proceed with repair after thoroughly cleaning grease off metal mounting bracket as follows. Clean metal mounting bracket with brake cleaner sprayed onto shop rag, rub on mounting surface until grease is removed. Do not spray brake cleaner directly onto seat. Replacement plastic part may fail in same way if grease is not removed.
9004129
FRAME, Front Seat Back For JL and JT vehicles with concern of front seat back appears loose at inboard (closest to center console) side hinge, please call Ajay Sharma at (646) 236-2413 prior to any repairs. If no response in 15 mins,proceed with repairs.
08-086-19
Removable Speaker Bluetooth Pairing Inoperative This bulletin involves testing and possibly replacing the wireless Bluetooth speaker. Customers may experience one or more of the following: Can pair the wireless Bluetooth speaker the first time without issue when the automatic pair feature starts, while pressing the power button for first time. However, they are unable to pair any additional devices using the speaker?s Bluetooth pairing button. Unable to pair any devices.
04-001-19
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
9004083
MODULE KIT, Fuel Pump/Level Unit 2020MY JT with 3.6L If a vehicle comes in with a P0461 code stored and possibly accompanied with a complaint of the fuel level gauge stuck at 7/8 of a tank, and the vehicle was built prior to 5/17/2019, please confirm electrical function of fuel level sensor call Anthony Reyes at (248) 462-4388. If no response in 15 minutes, proceed with repair. If vehicle was built on or after 5/17/2019, disregard this message and continue with normal repair.
23-017-19
Rear Seat Back Squeak This bulletin involves lubricating the plastic overmold area on both rear seat latches. Customers may experience the following:While driving a squeak can be heard coming from one or both rear seat latches.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.