9100900
Service Bulletin/Repair Instructions
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
Vehicle report
2025 JEEP GLADIATOR
Service bulletins
186 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
S2623000048 REV.A
Service Bulletin/Repair Instructions
Customer States Driver Seat inoperative. Seat Fuse F59 30A Found blown.
S2623000048
Service Bulletin/Repair Instructions
Customer States Driver Seat Inoperative.
113792
Service Bulletin/Repair Instructions
PAD - INSTRUMENT PANEL
9100872
Service Bulletin/Repair Instructions
Display Exchange part has been superseded. Order the latest Z part number: Z8607669AC --> Z8791155AA (Active Exchange Part) Z8607669AD --> Z8791669AA (Active Exchange Part) Z8607669AE --> Z8791156AA (Active Exchange Part) Z8607671AC --> Z8791157AA (Active Exchange Part) Z8607671AD --> Z8791158AA (Active Exchange Part) Z8607671AE --> Z8791159AA (Active Exchange Part)
9100533 Rev 1
Service Bulletin/Repair Instructions
DCSD Before replacing this part for a Blank screen, screen flickering or screen inoperative concern, perform a hard reset to the Display and see if concern is resolved. Currently no dealer claims with this issue stating the RVC image is affected. Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only. Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only. Exchange Part Number Supersession For Ordering: 68607669AC --> Z8607669AC --> Z8791155AA 68607669AD --> Z8607669AD --> Z8791669AA 68607669AE --> Z8607669AE --> Z8791156AA 68607671AC --> Z8607671AC --> Z8791157AA 68607671AD --> Z8607671AD --> Z8791158AA 68607671AE --> Z8607671AE --> Z8791159AA
113240
Service Bulletin/Repair Instructions
SPARK PLUG - NONE
113241
Service Bulletin/Repair Instructions
SPARK PLUG - NONE
113270
Service Bulletin/Repair Instructions
CORE – HEATER
113271
Service Bulletin/Repair Instructions
CORE – HEATER
113291
Service Bulletin/Repair Instructions
ENCLOSURE - SPEAKER
9100833 REV1
Service Bulletin/Repair Instructions
Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
S2508000025 REV. B
Service Bulletin/Repair Instructions
Instrument Panel Cluster (IPC) and Radio Compass Display has Dashes (--)
S2508000025 REV.A
Service Bulletin/Repair Instructions
Instrument Panel Cluster (IPC) and Radio Compass Display has Dashes (--)
112862
Service Bulletin/Repair Instructions
MOTOR - BLOWER WITH WHEEL
112863
Service Bulletin/Repair Instructions
MOTOR - BLOWER WITH WHEEL
112842
Service Bulletin/Repair Instructions
BOLT - HEX FLANGE HEAD
112845
Service Bulletin/Repair Instructions
WIRING – INJECTOR
9100833
Service Bulletin/Repair Instructions
Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
S268A000014
Service Bulletin/Repair Instructions
Radio/ETM is Adding Approximately 27mA Draw to Vehicle When in Logistics Mode
112856
Service Bulletin/Repair Instructions
HEATER - ELECTRIC COOLANT
112857
Service Bulletin/Repair Instructions
HEATER - ELECTRIC COOLANT
9100835
Service Bulletin/Repair Instructions
Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
S2623000040
Service Bulletin/Repair Instructions
Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
111760
Service Bulletin/Repair Instructions
MOTOR AND LINKAGE - WINDSHIELD WIPER
112203
Service Bulletin/Repair Instructions
SWITCH - STEERING WHEEL
08-208-26 REV. A
Service Bulletin/Repair Instructions
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.
111833
Service Bulletin/Repair Instructions
SENSOR – KNOCK
111834
Service Bulletin/Repair Instructions
SENSOR – KNOCK
08-208-26
Service Bulletin/Repair Instructions
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
S268A000013
Service Bulletin/Repair Instructions
Radio Volume Jumping Up To Max Volume After Radio Wake Up
111405
Service Bulletin/Repair Instructions
COVER - CYLINDER HEAD
111406
Service Bulletin/Repair Instructions
COVER - CYLINDER HEAD
S2623000018
Service Bulletin/Repair Instructions
Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving.
S268A000011
Service Bulletin/Repair Instructions
Radio Remains On After Ignition Off
08-134-26
Service Bulletin/Repair Instructions
Universal Garage Door Opener (UGDO) Inoperable Technicians may or may not find the following Diagnostic Trouble Code (DTC) present: SYMPTOM: ● B251D1-00 - Universal Garage Door Opener Control. Customers may comment on the following: ● Operational questions regarding the usage of the HomeLink® UGDO. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
08-130-26
Service Bulletin/Repair Instructions
Flash: Comfort Seat And Wheel (CSWM) Updates The customer may experience the following: SYMPTOM: ● Heated Steering Wheel does not get hot enough or does not work. This bulletin involves reprogramming the CSWM with the latest available software.
08-112-26
Service Bulletin/Repair Instructions
Flash: Electronic Climate Control (ECC) Updates Customers may experience the following: SYMPTOM: ● In cold ambient conditions when the remote start and HVAC Auto Mode is active, the vehicle blows cold air to the cabin instead of hot air to warm up the cabin interior. This bulletin involves reprogramming the ECC with the latest available software.
9100773
Service Bulletin/Repair Instructions
Disengaging Stabilizer Bar Front [SHG] 1. Follow procedure in SOL s2602000001 before replacing Smart Stabilizer Bar Assembly 2. If the ends of the stabilizer bar are rusted, DO NOT REPLACE THE STABILIZER BAR. The bar ends are currently masked to protect against excessive powder coats, which may lead to minor surface rust.
S2602000001
Service Bulletin/Repair Instructions
Service Electric Sway Bar Lamp On In Cluster. Diagnostic Trouble Code (DTC) C008E-00 In Auto Sway Bar (ASBS)
S2608000004
Service Bulletin/Repair Instructions
Remote Keyless Entry, Passive Entry, Remote Start Inoperative or a Cluster Message “Keyfob Not Detected”
S2608000010
Service Bulletin/Repair Instructions
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
23-005-26
Service Bulletin/Repair Instructions
Windshield Wiper Blade Maintenance Customers may experience one or more of the following: SYMPTOM: ● Wiper blades that chatter/streak/jump/skip/smear or make noise while traveling across the windshield. . No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, or otherwise, without written permission of FCA US LLC.
S1408000384 REV.J
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
110405
Service Bulletin/Repair Instructions
GLOVE BOX - INSTRUMENT PANEL
110406
Service Bulletin/Repair Instructions
GLOVE BOX - INSTRUMENT PANEL
110626
Service Bulletin/Repair Instructions
PANEL - FRONT SEAT BACK
110399
Service Bulletin/Repair Instructions
HANDLE - INSIDE RELEASE
110400
Service Bulletin/Repair Instructions
HANDLE - INSIDE RELEASE
S2603000001
Service Bulletin/Repair Instructions
A suspected leak may be noticed on the front or rear axle pinion seal.
S2621000003
Service Bulletin/Repair Instructions
Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
31-001-26 REV.A
Service Bulletin/Repair Instructions
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
S228A000025 REV.A
Service Bulletin/Repair Instructions
Harman R1H Uconnect 5 Radio Software Flash Error Codes
110462
Warranty Program/Extension
D-25-15 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110469
Warranty Program/Extension
ID-25-11 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110429
Warranty Program/Extension
Warranty Newsletter – Volume 12, Issue 2
110431
Warranty Program/Extension
FCA Caribbean Warranty Newsletter – Volume 12, Issue 2
S2423000027 REV.D
Service Bulletin/Repair Instructions
Horn Sound Is Weak, Off Tone, Inoperative, Or Intermittent.
31-001-26
Service Bulletin/Repair Instructions
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
9100591 Rev 1
Service Bulletin/Repair Instructions
Universal Garage Door Opener Prior to replacing the UGDO or sun visor, call HomeLink® Customer Care at 1-800-355-3515 for a proper evaluation of the issue. If this does not correct the issue, please follow the steps in SOL: S2508000039
S1408000384 REV.I
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2623000006
Service Bulletin/Repair Instructions
Washer Fluid Warning Lamp Illuminated When Reservoir Is Full
9100756
Service Bulletin/Repair Instructions
DO NOT REPLACE MULTIPLE SHOCKS UNLESS ALL ARE VERIFIED TO BE DEFECTIVE. Reference Master Tech article released in January 2026 for updated diagnostic and testing procedures. Master Tech link: https: //mastertech.playerlync.net/app/player/p2tQVm
109986
Service Bulletin/Repair Instructions
SWITCH - LUMBAR CONTROL
08-012-26
Service Bulletin/Repair Instructions
Speaker Diagnostic Procedure Rattle, buzz and squeak coming from specific speakers.
9004281
Service Bulletin/Repair Instructions
Before replacing bluetooth speaker for not charging or battery is dead, please refer to SOL #S248A000019 - Jeep Bluetooth Speaker Does Not Charge
109281
Service Bulletin/Repair Instructions
CENTER STACK – NONE
9100738 Rev 1
Service Bulletin/Repair Instructions
Issue Description: In JL/JT vehicles, many dealers and customers are not fully aware of the correct way to install the Mopar all-weather floor mats, especially the front mats. The all-weather mats are installed without removing the slit/perforation portion of the front carpet, which blocks the drain port on the all-weather mats completely and does not allow water/any liquid to get drained out of the vehicle through the drain hole on the underbody floor. Correct Installation Method for Mopar All-Weather Floor Mats 1. Find the slit/perforation on the front carpet (near the outboard mat post on the carpet )and cutout that piece from carpet. 2. Remove Drain Plug on the drain hole on the underbody floor 3. Install the All-Weather Mat. Make sure the mats built-in drain port lines up correctly into the drain hole on the floor. 4. Insert the drain plug in the drain port on all-weather mat to close the drain port. The plug is to be removed whenever there is need to drain water on the mat or to wash out dirt without removing the mat form the vehicle.
08-394-25 REV. A
Service Bulletin/Repair Instructions
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present Technicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure.
S2523000096
Service Bulletin/Repair Instructions
CEL (Check Engine Lamp)/ Brake lamp Illuminated. Diagnostic Trouble Code (DTC) P083F- Clutch Pedal Position Sensor Performance.
9100734
Service Bulletin/Repair Instructions
If the DTC B1E21-96: Backup Battery-Component Internal Failure is active and customer states Popup message will show at the radio: "Battery of Uconnect Box requires service. SOS call and related functions may be unavailable. Please visit an authorized dealer." PLEASE do not Replace the TBM module, only replace TBM Internal Battery (inside Telematics Box Module) and order PN68493347
9100738
Service Bulletin/Repair Instructions
Issue Description In JL/JT vehicles, the front carpets have a perforated section below the drain plug instead of a fully punched-out hole. This causes several problems: . Dealers often install all-weather mats without removing the carpet cutout, which completely blocks the drain. . Missing drain plug claims occur because the plug is not clearly visible. . Customers find it difficult to locate and access the drain plug, especially when the vehicle is muddy. Correct Installation Method for Mopar All-Weather Floor Mats To ensure proper drainage, follow these steps: 1. Identify the Issue: . Some owners place the all-weather mats directly over the carpet, blocking the drain hole even though the mat has a drain port. 2. Locate the Carpet Cutout: . Under the mat area, there is a pre-cut carpet section designed to be removed. 3. Remove the Carpet Piece and Plug: . Lift or cut out the small square of carpet to expose the metal floor. . Remove the rubber drain plug from the Jeeps floor. 4. Install the Floor Mat: . Place the all-weather mat back into position. . Align the mats built-in drain tube with the drain hole on the floor to form a proper seal. 5. Reinstall the Plug into the Mat: . Insert the drain plug (removed from the floor) into the drain hole on the mat. . This allows you to open the plug anytime to wash out dirt or water without removing the mats. Benefits . Enables washing the mats with a hose while they remain inside the vehicle; water drains directly to the ground instead of soaking the carpet. . Prevents water from getting trapped under the mat, avoiding carpet damage.
08-394-25
Service Bulletin/Repair Instructions
Telematics Box Module (TBM) Backup Battery Replacement When DTC B1E21 Is Present echnicians may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● B1E21-96 - Backup Battery Component Internal Failure
108893
Service Bulletin/Repair Instructions
MICROPHONE - AUDIO
108894
Service Bulletin/Repair Instructions
MICROPHONE - AUDIO
S2524000015
Service Bulletin/Repair Instructions
Temperature Control Display Is Showing Incorrect Values In Climate Widget.
S258A000021
Service Bulletin/Repair Instructions
Diagnostic Trouble Code (DTC) B15A1-00 Media Port Connection 1 Connection Found Set.
108544
Service Bulletin/Repair Instructions
SWITCH - POWER WINDOW
108458
Service Bulletin/Repair Instructions
DETECTOR - EVAPORATIVE SYSTEM INTEGRITY MODULE
108461
Service Bulletin/Repair Instructions
DETECTOR - EVAPORATIVE SYSTEM INTEGRITY MODULE
08-369-25
Service Bulletin/Repair Instructions
SOS Light Is On Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● B143A-13 - Microphone 1 - Circuit Open. ● B143D-13 - Microphone 2 - Circuit Open. Customers may also comment on one or more of the following: ● SOS light is illuminated. ● Customer can hear incoming calls but can't be heard on the other end. This bulletin involves replacing the **Microphone, Audio** assembly.
S2508000100
Service Bulletin/Repair Instructions
Intermittent Uconnect Box Requires Service Message. TBM Setting Stored Or Pending DTCs B22A9, B1560, B1561, B1562
S1805000006 REV.B
Service Bulletin/Repair Instructions
ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE
S2509000009
Service Bulletin/Repair Instructions
Engine Oil Leak
S2508000091
Service Bulletin/Repair Instructions
Radio (ETM) Is Always Setting Stored DTC B15A1-00 Media Port 1 Connection
105646
Service Bulletin/Repair Instructions
MODULE - STEERING CONTROL & COLUMN
9100670
Service Bulletin/Repair Instructions
Data collection required for all 2020-2026MY vehicles with 3.6L PSU engines during any of their first 3 engine oil changes. This data collection is applicable to all vehicle with engines with sales codes: ERG, ERC, EH3 and ERF. To assist with monitoring and quality improvement of the 3.6L engine, every time a vehicle comes for any of the first 3 oil changes, please use wiTECH to record the total engine idle time and the total engine runtime. 1. Prior to perform the oil change connect wiTECH diagnostic tool. 2. Navigate to the topology screen on the action item section. 3. Once the topology screen loads, disconnect wiTECH and continue with oil change.
S2218000003 REV.B
Service Bulletin/Repair Instructions
Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
107418
Service Bulletin/Repair Instructions
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
23-008-25 REV. A
Service Bulletin/Repair Instructions
Exterior Front Lamps Condensation Clearing Procedure *Some customers may report that on occasion vehicle exterior front lamps (headlamps, fog lamps, grille lamps, logo lamps or signature lamps) assemblies are fogged with a light layer of condensation on the inside of the lenses*
02-002-25 REV. A
Service Bulletin/Repair Instructions
Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.
106352
Service Bulletin/Repair Instructions
SHOCK ABSORBER – SUSPENSION & SHOCKS - REAR
S2508000068
Service Bulletin/Repair Instructions
Instrument Panel Cluster (IPC) Display Flickers, Overlapping Displayed Images, Multiple Warning Lamps Turn on And Off
S2522000001
Service Bulletin/Repair Instructions
TPMS Handling & Installation Best Practices
S2522000002
Service Bulletin/Repair Instructions
Customer Indicates Tire Pressure Monitoring System (TPMS) Lights On Dash.
08-269-25
Service Bulletin/Repair Instructions
Global Telematics Box Module (TBM) Firmware Over The Air (FOTA) Update To 5.65 Software Level The customer may comment on the following: ● Radio screen displays "Uconnect Box Error" with the message "Uconnect Box requires service. Please visit an authorized dealer" This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.53 to 5.65 software level.
31-001-25 REV. B
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25 REV. A
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25
Service Bulletin/Repair Instructions
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
9100649
Service Bulletin/Repair Instructions
False fails on PCR, DBSM and PDCs Stuck Closed or open diagnostics, DTC P2AF5 or P2AF6, leading to NTF and unnecessary replacements. Current controls are not robust against depleted auxiliary battery condition. Please follow SOL S2508000031.
9100654
Service Bulletin/Repair Instructions
Before replacing the key fob battery, please follow the following steps: 1- Check if there is a "FOB Low Battery" msg on the instrument cluster 2- Check if there is a fob Low battery active DTC Fob battery 1 DTC B1A10-00 or Fob battery 2 DTC B1A11-00 3- Check if the original battery is installed which Varta or Panasonic sized CR 2450 4- Verify if the fob ID printed under the battery cover matches fob IDs stored in the RFHUB, use DID $A004 - Engineering Development Data 1 (FOB ID 1 & 2) to check the fob IDs in the RFHUB 5- Check the voltage of the coin battery, replace the battery only if the voltage is 2.3V or below and report the voltage in the dealer narratives
S258A000019
Service Bulletin/Repair Instructions
Radio Does Not Turn On Automatically When Vehicle Is Started
S2509000001 REV.B
Service Bulletin/Repair Instructions
Engine Rattle Noise
23-006-25 REV. B
Service Bulletin/Repair Instructions
Windshield Wiper Blade Maintenance Customers may experience one or more of the following: ● Wiper blades that chatter/streak/jump/skip/smear or make noise while traveling across the windshield.
S2422000001 REV.D
Service Bulletin/Repair Instructions
Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
105648
Service Bulletin/Repair Instructions
MODULE - ENGINE CONTROLLER
21-009-25 REV. C
Service Bulletin/Repair Instructions
850RE D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
S2208000138 REV.B
Service Bulletin/Repair Instructions
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
9100622
Service Bulletin/Repair Instructions
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
23-026-25
Service Bulletin/Repair Instructions
Overhead Sound Bar Rattles Or Buzzes Customers may experience the following: ● Overhead sound bar speaker assembly buzzes or rattles This bulletin involves applying a foam strip to the back side of the sound bar speaker assembly.
105288
Service Bulletin/Repair Instructions
VALVE - CHECK
9100614
Service Bulletin/Repair Instructions
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
OTHERDOC_133
Service Bulletin/Repair Instructions
Global Telematics Box Module Over The Air Update from 5.39.1 to 5.65 TBM2.0 Software Version (FOTA) Customers may experience one or more of the following: - Error display of "Uconnect Box Requires Service/Wifi Unavailable" popups; [ TBM DTC B22A9-96 Internal Performance Failure ]. - Error display of "Uconnect Box Requires Service" pop-ups; [ TBM DTCs B1560, B1561, B1562 - Antenna loose connection ].
9100605
Service Bulletin/Repair Instructions
Shim - felt GIM # NUSENGCHR24018991: JL JT sun visor center support BSR. Add felt shim 68736674AA - 43MM OD x 10mm ID x 1mm thick.
9100599
Service Bulletin/Repair Instructions
Underhood start/stop safety The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC): - P152E Engine -Hood Switch 2 Circuit High. - DTC P152F Customers may also experience: - Start/Stop system warning light. - Start/Stop inoperable. - Remote start inoperable. Diagnosis: - Using a Scan Tool (wiTECH) with the appropriate Diagnostic Procedures available in DealerCONNECT/Service Library, verify all related systems are functioning as designed. If DTCs or symptom conditions, other than the one listed are present, record the issues on the repair order and repair as necessary before proceeding further with this bulletin. - If any vehicle exhibits any of the symptoms listed above in the customer symptom section, perform the Repair Procedure. - Special Tools/Equipment: wiTECH or equivalent. Repair Procedure: 1. Open the hood and locate the hood switch 2. Push in on the two locking tabs and pull them out. 3. Disconnect the wire connector from the switch. 4. Connect the wires to the same hood switch. 5. Push the switch back into the hold until both lock tab are engaged. 6. Clear all DTCs that may have been set in any module during this repair procedure. 7. In case the P152F/P152E DTCs persist, repeat the procedure with a new/spare/known good switch and repeat steps 5 and 6. 8. Replace switch installed during previous step for the original switch of the vehicle. If DTCs P152F/P152E are not present, leave the original switch installed and do not document the change of the switch in the repair process/narrative.
104966
Service Bulletin/Repair Instructions
BEZEL & INDICATOR- GEAR SHIFT INDICATOR
02-002-25
Service Bulletin/Repair Instructions
Shock And Strut Diagnosis And Replacement Guidelines Leaking, noisy, or weak shocks or struts.
S2523000049
Service Bulletin/Repair Instructions
B2779-04 Vehicle Pedestrian Alert Module-System Internal Failures. Quiet Vehicle Pedestrian Module (QVPM) Sound Is Not OK. Discussion: If diagnostic trouble code (DTC) B2779–04 is present and or QVPM is inoperative or sound is not okay, before replacing the module please check first the following service instructions: Perform the BODY VERIFICATION TEST. (Refer to 28 - DTC-Based Diagnostics/MODULE, Body Control (BCM) - Standard Procedure).
09-011-25
Service Bulletin/Repair Instructions
Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise.
S2508000039
Service Bulletin/Repair Instructions
Universal Garage Door Opener (UGDO) Inoperative, LED Indicator Lamps Not Illuminating
S2323000002 REV.A
Service Bulletin/Repair Instructions
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
105139
Warranty Program/Extension
Warranty Newsletter – Volume 11, Issue 5
105141
Service Bulletin/Repair Instructions
FCA CARIBBEAN WARRANTY OPERATIONS NEWSLETTER VOLUME 11, ISSUE 5
9100498 Rev 3
Service Bulletin/Repair Instructions
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.
9100534 Rev 1
Service Bulletin/Repair Instructions
Transmission "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, visible ""glitter"" or debris in the pan and fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
9100570
Service Bulletin/Repair Instructions
Transmission Fluid Please note fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Visible "glitter" or debris in the pan does not justify complete unit replacements.
08-155-25
Service Bulletin/Repair Instructions
Global Telematics Box Module (TBM) Firmware Over The Air (FOTA) Update 2023 - 2025 (JL) Jeep Wrangler 2023 - 2025 (JT) Jeep Gladiator This bulletin applies to vehicles built on or before May 05, 2025 (MDH 0505XX) equipped with Global Telematics Box Module (TBM) (Sales Code RDG). This bulletin provides information regarding the latest Firmware Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. The TBM software will be updated from 5.15, 5.41 or 5.43 to 5.53 software level
S2523000039
Service Bulletin/Repair Instructions
Steering Column Difficult To Adjust Up Or Down.
08-131-25
Service Bulletin/Repair Instructions
R1H Radio Over The Air Update U33.43 and U35.18 To U Customers may experience one or more of the following: ● Pop-up messages text cut-off "Transfer to Passenger". ● Missing active call details in phone widget after swap is performed. ● Missing Pop-up messages for Blind Spot related to Lane Management on/off. ● Virtual wall option in menu present (should be removed). ● Customer need to select Sound type in EV pages twice. ● Apple Car Play icon on main screen disapears when ACP is activ This bulletin provides information regarding the latest FOTA update and provides the service technician an overview of the steps a customer will need to take to complete the update. The radio software will be updated from U33.43 and U35.18 To U37
104409
Service Bulletin/Repair Instructions
DOOR - PASSENGER AIR BAG
9100491 Rev 1
Service Bulletin/Repair Instructions
Drag Link Long Socket FOR STEERING SHIMMY DIAGNOSIS, PLEASE REFERENCE S1819000004 Rev. Q AND 19 - Steering / Diagnosis and Testing (IN SERVICE LIBRARY). PLEASE REFER 19 - Steering / Linkage / END, Tie Rod / Diagnosis and Testing IF YOU HAVE BALL JOINT LOOSENESS CONCERN. PLEASE DO NOT REPLACE DRAG LINK AND TIE ROD UNLESS PART HAS VISIABLE DAMAGE OR FREE PLAY EXCEEDS SPECS.
104558
Warranty Program/Extension
FCA Caribbean Warranty Newsletter – Volume 11, Issue 4
104557
Warranty Program/Extension
Warranty Newsletter – Volume 11, Issue 4
21-009-25 REV. B
Service Bulletin/Repair Instructions
850RE D Clutch Repair **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must have at least 11,265 km (7,000 mi.) and exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear This bulletin involves replacing the D clutch.
S2523000024
Service Bulletin/Repair Instructions
Rear Defogger Solder Terminals Detached.
103524
Service Bulletin/Repair Instructions
TANK - FUEL
S2509000004
Service Bulletin/Repair Instructions
Misfire DTCs, Rough Idle, Valvetrain Noise
S2523000010 REV.A
Service Bulletin/Repair Instructions
Exterior Rear View Mirror Stained And Will Not Clean.
S2523000015 REV.A
Service Bulletin/Repair Instructions
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
9100534
Service Bulletin/Repair Instructions
Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback.
9100533
Service Bulletin/Repair Instructions
DCSD Before replacing this part for a Blank screen, screen flickering or screen inoperative concern, perform a hard reset to the Display and see if concern is resolved. Currently no dealer claims with this issue stating the RVC image is affected.
9100471
Service Bulletin/Repair Instructions
CANISTER Vapor -If an issue is detected with the Evaporative System Integrity Module (ESIM) Detector and not the Vapor Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM.
S2423000027 REV.C
Service Bulletin/Repair Instructions
Horn Sound Is Weak, Off Tone, Inoperative, Or Intermittent.
S2509000002
Service Bulletin/Repair Instructions
Engine Noise
S258A000009
Service Bulletin/Repair Instructions
Apple CarPlay Does Not Complete The First Initial Wireless Connection.
S2523000015
Service Bulletin/Repair Instructions
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
9100498 REV 1
Service Bulletin/Repair Instructions
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.
S2108000015 REV.J
Service Bulletin/Repair Instructions
Uconnect Box Require Service Message
9100500
Service Bulletin/Repair Instructions
Touchscreen For all infotainment system repairs (touchscreens, radios, etc.), refurbished parts may be available. Follow the Infotainment Ordering guide available under the "Parts" section of Dealer Connect: DealerCONNECT> Parts> News& Information> Audio & Electronic Products Exchange Process
S2523000010
Service Bulletin/Repair Instructions
Exterior Rear View Mirror Stained And Will Not Clean.
S2509000001
Service Bulletin/Repair Instructions
Engine Rattle Noise
09-003-25
Service Bulletin/Repair Instructions
Oil Leaking From Oil Filter Area Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set the following Diagnostic Trouble Code (DTC): ● P06DD - Engine Oil Pressure Control Circuit Stuck Off. Customers may comment on the following: ● Oil found on the ground beneath the vehicle.
23-008-25
Service Bulletin/Repair Instructions
Headlamp Condensation Clearing Procedure Some customers may report that on occasion, vehicle exterior head lamp assemblies are fogged with a light layer of condensation on the inside of the lenses.
S2323000004 REV.A
Service Bulletin/Repair Instructions
Defogger Is Not Working. Terminal Detached From The Glass.
S228A000005 REV.E
Service Bulletin/Repair Instructions
Uconnect Box Error Message, With Active or Stored Cellular Antenna Open or Short Diagnostic Trouble Codes (DTCs)
9100498
Service Bulletin/Repair Instructions
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets).
21-009-25 REV.A
Service Bulletin/Repair Instructions
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear. This bulletin involves replacing the D clutch
103063
Service Bulletin/Repair Instructions
SHIFTER - TRANSMISSION
S1408000384 REV.H
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
102384
Service Bulletin/Repair Instructions
EVAPORATOR - AIR CONDITIONING
9100470
Service Bulletin/Repair Instructions
FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule. If the Filter is restricted or blocked then replace the part.
9100491
Service Bulletin/Repair Instructions
Drag Link Long Socket FOR STEERING SHIMMY DIAGNOSIS, PLEASE REFERENCE S1819000004 Rev. Q AND 19 - Steering / Diagnosis and Testing (IN SERVICE LIBRARY). PLEASE REFER 19 - Steering / Linkage / END, Tie Rod / Diagnosis and Testing IF YOU HAVE BALL JOINT LOOSENESS CONCERN. PLEASE DO NOT REPLACE DRAG LINK AND TIE ROD UNLESS PART HAS VISIABLE DAMAGE OR FREE PLAY EXCEEDS SPECS.
21-009-25
Service Bulletin/Repair Instructions
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. **Customers may also comment on one or more of the following: ● Transmission slips when shifting. ● Vehicle will not move in reverse. ● Vehicle will not shift higher than third gear.** This bulletin involves replacing the D clutch."
9100749 Rev 1
Service Bulletin/Repair Instructions
We have observed that some JL/JT rear axle shafts are leaking oil. Replace axle shaft and seal together. Do not replace seal only. Keep original seal and axle shaft and send the parts as fast track.
S1408000384 REV.G
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
23-060-24
Service Bulletin/Repair Instructions
B-Pillar Water Leak When Vehicle Is Parked On A Hill Customers may experience one or more of the following: ● The vehicle will leak water from the top of the B-pillar when the vehicle is parked on a downward incline. ● Water on door trim or carpet. ● Water drips down the inside door and panel This bulletin includes performing a water test and possibly adding foam pads to both Freedom Panels.
101792
Service Bulletin/Repair Instructions
FILTER - AIR
101816
Service Bulletin/Repair Instructions
FILTER - AIR
21-039-24 REV. H
Service Bulletin/Repair Instructions
D Clutch Repair Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0733-00 - Gear 3 Shift Incorrect Ratio. ● P1DA8-00 - Incorrect Gear Ratio Clutch A B or D Defective. ● P1D92-00 - Incorrect Gear Ratio - Clutch 4 Defective. This bulletin involves replacing the D clutch
101684
Service Bulletin/Repair Instructions
COVER KIT - HOOD
101664
Service Bulletin/Repair Instructions
GRILLE - INSTRUMENT PANEL SPEAKER
101285
Service Bulletin/Repair Instructions
DAMPER - NONE
S2422000001 REV.C
Service Bulletin/Repair Instructions
Tire Pressure Monitor (TPM) Service Information. TPM Lamp On.
S2423000045
Service Bulletin/Repair Instructions
Heated Steering Wheel Inoperative And Or Not Hot Enough.
100774
Service Bulletin/Repair Instructions
SWITCH - HEADLAMP
97802
Service Bulletin/Repair Instructions
SWITCH - HEADLAMP
S2422000002
Service Bulletin/Repair Instructions
Low Tire Pressure. Tire Valve Stem And Tire Pressure Monitor (TPM) Sensor Service.
S228A000017 REV.A
Service Bulletin/Repair Instructions
Battery Drain Suspected or "Identified" From USB or Media Hub
S2123000046 REV.B
Service Bulletin/Repair Instructions
Click Noise From Front End While Driving And Or Turning.
99670
Other
GLOVE BOX - INSTRUMENT PANEL
99955
Other
BEZEL - INSTRUMENT PANEL
99659
Other
WHEEL - STEEL
99500
Other
CARRIER – PLANETARY & SHAFT KIT - OUTPUT
9100389
Service Bulletin/Repair Instructions
CAN Star Block Connector Customer finds MIL light on and technician finds DTC for loss of communication on one or more modules. In repair procedure the dealerships are replacing the CAN star block connector during their root cause process with returned parts showing no trouble found. Here is a list of steps the dealers can follow to determine if they have a defective CAN star block connector using a multimeter: Step 1: Visually review CAN star block for damage and ensure back cover has all locking tabs engaged. If a bent pin, cracked or damaged housing or locking tab is not engaged is observed then replacement is required. Step 2: Identify Connector #1 as the 3 Pin Connector cavity Step 3: Measure resistance between Pin#1 and Pin#2 in Connector #1. Acceptable values are 120.4 Ohms to 139.8 Ohms. If resistance is outside of this range then replacement is required. Step 4: Measure the continuity between Pin#1 in Connector #1 to Pin#1 in each of the other 2 Pin connector cavities. If continuity is not found then a replacement is required. Step 5: Measure the continuity between Pin#2 in Connector #1 to Pin#2 in each of the other 2 Pin connector cavities. If continuity is not found then a replacement is required.
S2408000066
Service Bulletin/Repair Instructions
Drained Battery, Low System Voltage, Battery Not Charging, High System Voltage
S1408000384 REV.F
Service Bulletin/Repair Instructions
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.