Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
OTHERDOC_183
Radio Over The Air Update to U43.17 R1H Software Version (FOTA) Customers may experience one or more of the following: - Navigation Stability - Android Auto & Carplay stability & connectivity - Power management app - Distorted/glitchy display prior to start‑up animation - Text appearance display - Widget incorrect display - Turn signal blind spot response timing - Audio cut out - Drive Modes selection - Park assist Guidelines selction
S2623000052 REV. A
Airbag Warning Light On or Intermittent. The Occupant Restraint Controller (ORC) May Have The Following DTCs (Active/Stored)
9100891
Display Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders, Warranty, Mopar, Customer Pay and Service Contract. Order "68" part number for New, Unsold units only.
114273
D-26-18 Rev. A Dealer Incentive for the Completion of Customer Satisfaction Notification 66D
114275
ID-26-38 Rev. A Dealer Incentive for the Completion of Customer Satisfaction Notification 66D
114236
Dealer Incentive for the Completion of Customer Satisfaction Notice (CSN) 66D
114238
Dealer Incentive for the Completion of Customer Satisfaction Notice (CSN) 66D
09-020-26
Umbrella Valve Seal Missing From Cylinder Vehicle may exhibit a MIL-ON. SYMPTOM: Upon inspection the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have set: ● P0300-00 - Random/Multiple Cylinder Misfire Detected. ● P0301-00 - Cylinder 1 Misfire. ● P0302-00 - Cylinder 2 Misfire. ● P0303-00 - Cylinder 3 Misfire. ● P0304-00 - Cylinder 4 Misfire. This bulletin involves inspecting for a missing umbrella valve seal on the underside of the cylinder head cover and, if necessary, replacing the cylinder head cover.
09-017-26 REV. A
Umbrella Valve Seal Missing From Cylinder Head Cover Customer may experience a MIL-ON and/or an indication of low engine oil level. SYMPTOM: Upon inspection the technician may find the following: 1. One or more of the following Diagnostic Trouble Codes (DTCs) have set: ● P0300-00 - Random/Multiple Cylinder Misfire Detected. ● P0301-00 - Cylinder 1 Misfire. ● P0302-00 - Cylinder 2 Misfire. ● P0303-00 - Cylinder 3 Misfire. ● P0304-00 - Cylinder 4 Misfire. 2. Engine oil level is low. IMPORTANT! If none of above symptoms are present, this TSB does NOT apply. This bulletin involves inspecting the engine oil level, possibly inspecting for a missing umbrella valve seal on the underside of the cylinder head cover and, if necessary, replacing the cylinder head cover.
S2508000029 REV.B
Instrument Panel Cluster (IPC) Message “Park Assist System Unavailable” or “Service Park Assist System”, “Rear Braking Assist Unavailable” or “Service Rear Braking Assist System" with Performance Diagnostic Trouble Codes (DTCs)
S2523000032 REV.B
Steering Dragging While Recreational Flat Towing Behind RV.
S2508000029 REV.A
Instrument Panel Cluster (IPC) Message “Park Assist System Unavailable” or “Service Park Assist System”, “Rear Braking Assist Unavailable” or “Service Rear Braking Assist System" with Performance Diagnostic Trouble Codes (DTCs)
66D Combo Rev1
CUSTOMER SATISFACTION NOTIFICATION NORTH AMERICA Spark Plugs Reference: 66D The spark plugs insulator on approximately 48,000 of the above vehicles may break due to excessive cylinder pressure. This pressure can cause the spark plug's ceramic insulator to crack, leading to a rough-running engine. If this issue is not resolved promptly, the broken fragments can fall into the cylinder and cause internal engine damage.
9100859
Before replacing any part, check the DOT on the glass or the PN to make sure you choose the replacement part from the correct supplier: DOT 615 - 6NC10TRMAH - CIE Supplier DOT 1038 - 6NC07TRMAR - CIE Supplier DOT 1065 - 7TF32TRMAB, 7TF33TRMAB - HCMF Supplier
9100833 REV1
Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
9100833
Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.
9100834
Ambient cabin light fault B2811-02 inop. If Ambient Lights can change color and intensity, do not replace Auxiliary/Ambient Lighting Module (ALM). Follow the diagnostic for B2811-02. Before replacing, verify the vehicle PROXI is correct for the vehicle (2-row/3-row). If PROXI is incorrect, re-PROXI and then perform a hard reset of the ALM.
9100826
WL DDM/PDM Mirror Blindspot inoperative If DTC is present DTC B285F-15 Blind Spot Warning Light Control-Circuit Short to Battery or Open Before replacing DDM/PDM. Inspect connection on Mirror connector end. Perform electrical continuity test. After succesful continuity test. Via Witech perform hard reset and clear DTC.
112552
D-26-13 Rev. A Claim Submission for Hurricane Spark Plug Repair
112535
Claim Submission for Hurricane Spark Plug Repair
23-019-26
Hot Cup Holders Customers may comment on the following: ● When the rear heat temperature is set at or near max hot output, the front center console's surfaces, first row and second row cup holders and storage bins are getting warm to the touch. This bulletin involves removing the front center console and installing an insulator foam pad on top of the Center Console air duct.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.