107418
Service Bulletin/Repair Instructions
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
107418
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
9100645
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
9100653
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
103954
ACTUATOR - A/C AND HEATER
104087
ACTUATOR - A/C AND HEATER
101232
Plate - Planetary
9100226
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
9004378
KEY, BLANK WITH TRANSMITTER Please note that after programming the new key integrated transmitter that Lock, Unlock and Remote Start will all function as expected but the Remote Start Cancel button requires a double (2x) button press versus the original single (1x) button press to cancel the remote start function and turn the vehicle off.
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
71838
Warranty Bulletin D-18-16 Rev. B Mopar Windshield Made With Corning Gorilla Glass (Rev. B)
S1121000006 Rev.
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
S1121000006RevA
(Revision A) No Start No Crank ? Starter Will Not Engage And There Are No Related Codes Or Concerns
S2025000005
Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
23-015-20
Disinfectant Solution Recommended for COVID-19
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
D-20-02 Rev. A
DIPAP Requirements - Addition of Jeep Wrangler (JL/JK) and Jeep Gladiator (JT) Hard Top and Targa Top Panel Replacements - All Dealers (Rev. A)
31-003-19
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
31-005-19
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
31-006-19
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
3100319
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100419
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
3100519
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
9004142
DOOR, Assembly (Front or Rear) For concern of flag nut not aligned to hole, use a blunt tool and lightly tap on the flag nut to knock it loose from e-coat that has dried it in place.
9003220
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
DOT-L4X8T-04
The SKU is a Tie Rod Center Stud. The Customer commnunication requested return of unsold inventory to inpsect for possible incorrect direction threads (right hand rather than left hand). Incorrect direction threads will prevent it from being installed.
S80
Customer Satisfaction Notification S80 Aftermarket Dana 60 Front Axle The aftermarket front axle steering knuckles have been machined with an incorrect taper during the manufacturing process on about 250 of the above vehicles, with approximately 80 of the axles sold by Mopar aftermarket. This condition can result in premature axle knuckle wear. The aftermarket front axle knuckles must be replaced with new axle knuckles for the left side and right side.
05-022-17
Front Brake Caliper Hose Leak (X71 Warranty Extension) This bulletin involves replacing both front brake caliper hoses and wheel speed sensors. Customers may experience a brake fluid leak coming from the front wheel opening area. This issue is due to corrosion at the crimps on the brake caliper hosesFig. 1.If the customer describes the symptom/condition listed above, perform the Repair Procedure.Example Of Corrosion At Crimps
D-17-15
(X71) Front Left and Right Brake Caliper Hoses & Both Wheel Speed Sensors - 2007 - 2010 Jeep Wranglers (JK)
9003687
Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
9003681
Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
23-037-16
Out Of Tolerance Door And Windshield Frame Gaps Causing Water Leaks This bulletin involves adjusting the windshield frame and A-pillar between the door to close gaps and prevent water leaks. The customer may describe gaps between the windshield frame, door and top of cowl. There may also be a water leak.
R2118796A
Valve Body. These may cause over drive cycling.
RL108213A$
NAG1 (5A580) Valve Body As per Warranty Bulletin D-13-22, please use R2108213A$ valve body for all Warranty (W), Mopar (M) and Mopar Vehicle Protection (F) claims.~ Assembly also includes Filter (52108325AA) and Gasket (52108332AA).~
23-038-15
Cracked Vinyl Soft Top Window This bulletin provides soft top vinyl window precautions during cold weather.
9003225
Part Description: Soft Top Quarter Window or Rear Window Issue Description: Please cycle the zipper 5-10 times when there is a single skipped zipper tooth.
9002887
Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
23-034-14 REV. A
Cowl Trim Panel Fastener Water Leak This bulletin involves modifying or replacing the cowl trim panel fasteners to correct a water leak condition. The customer may describe a water accumulation condition on the vehicle floor front foot well area.
23-034-14REV.A
JEEP WRANGLER 2012-2014: COWL TRIM PANEL FASTENER WATER LEAK. CUSTOMER MAY EXPERIENCE WATER ACCUMULATION ON THE FRONT FLOOR AREA. *LJ UPDATED 05/01/15. *LJ
2303414REVA
Cowl Trim Panel Fastener Water Leak This bulletin involves modifying or replacing the cowl trim panel fasteners to correct a water leak condition. The customer may describe a water accumulation condition on the vehicle floor front foot well area.
2303414
Cowl Trim Panel Fastener Water Leak
23-034-14
Cowl Trim Panel Fastener Water Leak This bulletin involves modifying or replacing the cowl trim panel fasteners to correct a water leak condition. The customer may describe a water accumulation condition on the vehicle floor front foot well area.
9003112
Soft Top Door Rail Service Kits Use this soft top door frame rail kit for worn foam or a water leak: 1) For 2010 - 2014 units, remove the old foam part, clean rail of any residue, alcohol wipe the surface, apply promoter (if available), and apply new foam part.~ 2) For 2007 - 2009 units, cut off 8.0 mm from the end that faces the windshield, remove the old foam part, clean rail of any residue, alcohol wipe the surface, apply promoter (if available), and apply modified foam part.
08-058-14
Clock In The Radio Loses Time This bulletin involves replacing the Wireless Control Module (WCM)/Sentry Key Remote Entry Module (SKREEM). Customer may experience a condition where the clock will lose over one minute a month.
14-004-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
23-021-13
Replacing Door, Hood And/Or Tailgate Hinges This bulletin involves replacing, refinishing and sealing door, tailgate and hood hinges.
SB-23-021-13
JEEP: ON SOME VEHICLES, INFORMATION IS PROVIDED REGARDING THE REPLACING, SEALING, REFINISHING OF DOOR, HOOD AND/OR TAILGATE HINGES. MODEL 2007-2013 WRANGLER. *PE
M31050813
New Safety Recall Advanced Communication ? M31050813 Chrysler Group LLC (Chrysler) announced a safety recall on certain 2008 through 2012 model year (JK) Jeep Wrangler vehicles equipped with a Right Hand Drive (RHD) steering configuration (sales code AHF) and built for U.S specifications (sales code YAA). Some of the above vehicles may have an airbag system clockspring assembly that could experience a compromised airbag circuit. This condition could result in an airbag warning lamp illumination. Chrysler will conduct a voluntary safety recall on all affected RHD vehicles to replace the airbag system clockspring. Additionally, 2008 through 2010 model year vehicles will receive a steering wheel dust shield. NOTE: Safety Recall L37 which provided an interim repair for this issue is being cancelled. Involved vehicle owners will be sent a second owner notification requesting they have their vehicle repaired. Dealers will be notified of the launch of this safety recall by way of established methods used in the past. We ask that you please take the time to ensure that your personnel are aware of this communication and are prepared to execute a customer friendly process for inquiries on involved vehicles.
08-003-13 REV. A
Clock In The Radio Loses Time This bulletin involves replacing the Wireless Control Module (WCM)/Sentry Key Remote Entry Module (SKREEM). Customer may experience a condition where the clock will lose over one minute a month.
SB08-003-13-REVA
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
9002519
82212076, 82203694 - Fabric Cleaner This "fabric cleaner" is not intended for sale in California, the otc states (Connecticut, Delaware, Massachusetts, Maine, New Hampshire, New Jersey, New York, Pennsylvania, Virginia, and Washington dc), and some ladco states (Illinois, Michigan, and Ohio). Mopar offers an alternative product (82213192) which is a water based product approved for sale in the aforementioned states.~ ~ Please inform the customer & your prep dept that spraying excessive amounts of the fabric protector on load floors will result in the breaking down of the adhesive (glue) that is used to create the bond between the fabric (carpet) and the load floor. This will apply to any vehicles equipped with rear load floors such as WK, WD, PM, MK, KA, KK. The carpet will appear to be loose, wrinkly, or bunch up~
09-001-13
Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
08-003-13
Clock In The Radio Loses Time This bulletin involves replacing the Wireless Control Module (WCM)/Sentry Key Remote Entry Module (SKREEM). Customer may experience a condition where the clock will lose over one minute a month.
SB-08-003-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
23-001-13
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SB-23-025-12
JEEP: REPAIR PROCEDURE INFORMATION IS BEING PROVIDED REGARDING REMOVAL, REFINISHING, SEALING, REPLACING DOOR, TAILGATE AND HOOD HINGES. MODEL 2007-2012 WRANGLER. *PE
WB-D-11-25
JEEP: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. INFORMATION REGARDING THE EXTENSION WARRANTY FOR DIAGNOSIS AND REPLACEMENT OF TRANSMISSION OIL COOLER LINES. *PE
SB-21-006-11
CHRYSLER: 2008-2010 JEEP WRANGLER. WEEPING TRANSMISSION OIL COOLER LINES. INFORMATION ON INSTALLING NEW TRANSMISSION OIL COOLER SUPPLY AND RETURN LINE ASSEMBLY. *RM
CSN-L05
CHRYSLER SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THE TRANSMISSION COOLER LINES MAY LEAK TRANSMISSION FLUID AT THE HOSE TO TUBE JOINTS. *RM
SB-02-003-10
JEEP: REPLACEMENT OF THE STEERING DAMPER AND STEERING DAMPER BRACKET. STEERING WHEEL/LINKAGE VIBRATION FROM ROUGH SURFACES. IF THE CONDITION IS PRESENT PERFORM THE REPAIR PROCEDURE. *PE UPDATED 4/18/11. *PE
CSN-J31
CHRYSLER SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. TRANSMISSION FLUID TEMPERATURE WARNING. THE TRANSMISSION FLUID ON CERTAIN VEHICLES MAY OVERHEAT UNDER SEVERE USAGE CONDITIONS SUCH AS TRAILER TOWING, SNOW PLOWING OR EXTREME OFF ROAD DRIVING. CSC LETTER WAS RECEIVED. MODEL WRANGLER. *PE
CSN-J34
CHRYSLER (JEEP) SERVICE CAMPAIGN: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. THIS TSB CONTAINS AN OWNER NOTIFICATION LETTER. SELECT DOCUMENT SEARCH BUTTON BELOW. STEERING DAMPER. THE STEERING DAMPER ON VEHICLES MAY DEGRADE RESULTING IN A LOSS OF STEERING SYSTEM DAMPING. A NEW STEERING DAMPER, MOUNTING BRACKET AND ATTACHING FASTENERS MUST BE INSTALLED. *PE
SB-14-002-09
JEEP: HARD TO FILL WITH FUEL OR MUST FILL FUEL AT VERY SLOW RATE. REPLACING THE VENT LINE TUBE VENT LINE FILTER, VENT LINE AND RECIRCULATION LINE. CAUSED BY THE VENT SYSTEM NOT BEING ABLE TO PROVIDE ENOUGH TANK VENTILATION. *PE
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.