9100900
Service Bulletin/Repair Instructions
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
9100900
Passive Entry O/S Dr Handle Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
9100363 Rev 3
Turbocharger Kit Please note that many turbo components are serviceable separately and full turbo replacement may not be required. If the turbo is being inspected for: Noise/Rattle: Inspect heat shield fasteners for looseness and check the wastegate actuator/linkage for binding. The actuator kit is serviced separately. Oil Leak: Inspect the turbo oil feed O-ring area for leaks. O-ring is serviced separately.
114044
D-25-15 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
114045
ID-25-11 Rev. C Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
08-298-26 REV. A
Instrument Panel Cluster (IPC) Blank XZ1 Warranty Extension Customers may experience the following: SYMPTOM: ● **A blank electronic vehicle information center (EVIC) in the IPC. No information is displayed for the fuel level, temperature gauge, odometer, outside temperature, PRNDL and optional digital speedometer Fig. 1. IMPORTANT! The analog speedometer and tachometer gauges continue to function normally Fig. 1**. This bulletin involves replacing the IPC.
16C Combo Rev3
EMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp 16C The instrument panel cluster on about 32,587 of the above vehicles may have an inoperable check engine/malfunction indicator lamp (CEL/MIL). (JT) vehicles: CEL/MIL and cargo lamp indicator function are swapped. (JL) vehicles: CEL/MIL will not turn on. The CEL/MIL in and of itself will not affect emissions. However, if there was an emission issue that would require illumination of the CEL/MIL, the customer would not be alerted. The vehicle would be non-compliant to the OBD II regulation.
08-298-26
Instrument Panel Cluster (IPC) Blank XZ1 Warranty Extension Customers may experience the following: SYMPTOM: ● A blank IPC display. No information is displayed for the speedometer, fuel level, temperature gauge, odometer, outside temperature and PRNDL. NOTE: The speedometer and tachometer continue to function normally. This bulletin involves replacing the IPC.
113809
ID-26-37 (XZ1) Instrument Panel Cluster (IPC) - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
113813
D-26-17 (XZ1) Instrument Panel Cluster (IPC) - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
113270
CORE – HEATER
113271
CORE – HEATER
112862
MOTOR - BLOWER WITH WHEEL
112863
MOTOR - BLOWER WITH WHEEL
112842
BOLT - HEX FLANGE HEAD
9100835
Prior to replacing an inoperative passive entry door handle, perform Star Online S2623000040.
S2623000040
Passive Entry Exterior Door Handle Inoperative When Touched To Lock And Or Unlock.
08-208-26 REV. A
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle.
08-208-26
Radio Message "Power Surge On USB Detected" Customers may comment on the following: ● The radio displays the message: “Power surge on USB hub detected” Fig. 1. NOTE: After the message appears, no USB devices function in the hub (no charging, no data). NOTE: Hub operation does not return until the vehicle undergoes a full key cycle
S2623000018
Wind Noise From Hard Top Freedom Panels Near Rear View Mirror While Driving.
08-133-26
Rear Defroster Inoperative Customers may experience one or more of the following: SYMPTOM: ● Rear window is not defrosting. ● The rear window glass left or right side defrost solder terminal is detached from the defrost grid. This bulletin involves replacing the Electric Backlite (EBL) wire connector repair and re-securing the electrical connector(s) to the rear window.
18-044-26
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance. (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance. (In Active or Stored status) ● P0604-00 - Internal Control Module Random Access Memory Ram Error. (In Active or Stored status) ● P060C-00 - Internal Control Module Main Processor Performance. (In Active or Stored status)** ● P018B-00 - Fuel Pressure Sensor "B" Circuit Range/performance. **(In Active or Stored status)** ● P1CEA-00 - Boost Side EVAP Purge System Performance. **(In Active or Stored status)** ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. **(In Active or Stored status)** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. **(In Active or Stored status)** ● P0300-00 - Multiple Cylinder Misfire. **(In Active or Stored status)** Customers may also experience one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC).** ● Fully Autonomous Parking Assist (FAPA) is not deactivated when accelerator pedal is pressed. ● Vehicle is not heating up fast enough at freezi
16C Combo REV2
Emissions Recall 16C - Check Engine/Malfunction Indicator Lamp - Dealer Notification (Revision 2)
S2621000003 REV.A
The vehicle will exhibit a service transmission/check engine warning indicator for the following transmission models: 845RE, 8HP45, 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV, 8HP75-LCV, 8HP90, 8HP95. Transmissions may exhibit the following diagnostic codes: P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
S2608000010
Active Diagnostic Trouble Code (DTC) B1A10-00, B1A11-00, B1A12- 00, B1A13-00-, B1A14-00, B1A15-00, B1A16-00, and B1A17-00 in The Radio Frequency Hub (RFH)
S1408000384 REV.J
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
110399
HANDLE - INSIDE RELEASE
110400
HANDLE - INSIDE RELEASE
S2621000003
Service transmission/check engine warning indicator for the 850RE, 8HP50, 8HP70, 8HP75, 8HP75-PHEV transmissions that have fault codes P07E4, P1DB2, P0716, P1B14, P0733, P1D90, P1DB7, P1B13.
31-001-26 REV.A
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
110462
D-25-15 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110469
ID-25-11 Rev. B Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
110429
Warranty Newsletter – Volume 12, Issue 2
110431
FCA Caribbean Warranty Newsletter – Volume 12, Issue 2
31-001-26
Door Hem Aluminum Body Panel Corrosion Repair Customers may experience the following: SYMPTOM: ● Filifom corrosion at the hem area of the door. This bulletin involves removing corrosion and refinishing the hem area on the vehicle door.
16C Combo REV1
EMISSION RECALL – NORTH AMERICA Check Engine/Malfunction Indicator Lamp Reference: 16C
S1408000384 REV.I
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
S2408000024 REV.B
Power Top Switch Unresponsive, Full Retractable Sky Roof Does Not Open or Close
S2623000006
Washer Fluid Warning Lamp Illuminated When Reservoir Is Full
9100756
DO NOT REPLACE MULTIPLE SHOCKS UNLESS ALL ARE VERIFIED TO BE DEFECTIVE. Reference Master Tech article released in January 2026 for updated diagnostic and testing procedures. Master Tech link: https: //mastertech.playerlync.net/app/player/p2tQVm
109820
SEAL - ROOF RAIL
109822
SEAL - ROOF RAIL
109724
Water Pump & Chain Case Cover
109727
Water Pump & Chain Case Cover
109223
BEZEL - INSTRUMENT PANEL
109224
DOOR - PASSENGER AIR BAG
16C Combo
Check Engine/Malfunction Indicator Lamp 16C
9100736
Verify "Z" part number availability. Order a "Z" part number for all Exchange Orders: Warranty, Mopar, Customer pay and Service contract. Order"68" part number for New unsold units only
S1819000004 REV.R
Shimmy Felt In Front End
108544
SWITCH - POWER WINDOW
108655
D-25-15 Rev. A Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
108657
ID-25-11 Rev. A Aluminum Filiform Corrosion Warranty Policy and Vehicle Digital Imaging (VDI) Pre-Approval Process - ALL Vehicles
108463
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
108464
PAD KIT - REAR DISC BRAKE, FRONT DISC BRAKE
S2509000009
Engine Oil Leak
105646
MODULE - STEERING CONTROL & COLUMN
9100325 Rev 1
Before replacing any parts please refer to SOL S2518000008 if it applies to the vehicle you are working on based on a VIN search in Service Library. Before replacing this part due to Engine Light On with P1CEA (Boost Side EVAP Purge System Performance), check for: 1) Improperly connected or kinked/pinched Purge Hoses at the Ejector Tees on the Air Box or Duct. 2) Improperly connected or kinked/pinched Purge Hose at the Purge Solenoid or OBD Valve. 3) Improperly connected or kinked/pinched Purge Hose at the Intake. 4) Check for the correct Purge Hoses installation.
S2218000003 REV.B
Customer complaint may include a Mil On/Check Engine Lamp On and Electronic Throttle Control (ETC) Lamp On. There may also be associated driveability issues. Upon further investigation, the following fault codes may be found in the PCM:
107418
SWITCH - CLUTCH STARTER INTERLOCK & MASTER CYLINDER ASSEMBLY - CLUTCH
31-001-25 REV. B
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
9100645
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
9100653
Verify Reman part number availability. Order the "R" part number for all orders: Warranty, Mopar, customer pay and service contract. Order "68" part number for New unsold units only.
31-001-25 REV. A
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates.
31-001-25
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates
S2509000001 REV.B
Engine Rattle Noise
S2208000138 REV.B
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
9100622
When replacing a camshaft and parts kit (P/N 68661146xx and/or 68661147xx), it is NOT necessary to order the roller-finger followers (rocker arms) separately, as these are included in the camshaft parts kit.
105647
RAIL - REAR
9100614
ADJUSTER Valve Lash Customer's complaint may include a ticking noise coming from the engine. Technician's observations can refer to spongy or stuck hydraulic lash adjusters. Exhaust lash adjusters found with a "spongy" condition (compressible plunger) leading to the assumption of being defective/malfunctioning. EXHAUST lash adjusters are designed to be COMPRESSIBLE by hand. Intake lash adjusters found with a stiff or stuck condition (non-compressible plunger) leading to the assumption of being defective/malfunctioning. INTAKE lash adjusters are designed to be NON COMPRESSIBLE by hand. Do Not Replace EXHAUST lash adjusters when the following condition is present: should be compressible, but they will exert a reactionary spring force during compression and return to full expansion without a compression force. Do Not Replace INTAKE lash adjusters when the following condition is present: should feel very firm and difficult to compress. Once the correct functioning of the intake and exhaust lash adjusters is validated with the procedure above, refer to the Service Manual "HYDRAULIC LIFTER(S) NOISE DIAGNOSIS" procedure. After the corresponding service procedures from the Service Manual involving the Lash Adjusters have been conducted, refer to the detailed instructions in the Service Manual to diagnose and/or service any other component.
09-015-25
Spark Knock/Engine Symptoms Customers may experience the following: ● Knocking or pinging noise coming from the engine upon acceleration. This bulletin involves cleaning the piston heads and cylinder head combustion chambers to resolve a spark knock condition being caused by oil intrusion through the PCV system.
S2408000024REVA
Power Top Switch Unresponsive, Full Retractable Sky Roof Does Not Open or Close Customer Complaint/Technician Observation: The owner complains the top system is inoperative and that by pressing the switches the Power Top does not make any movement. Technician may or may not have Diagnostic Trouble Codes (DTCs). Repair Procedure: Perform the power top calibration prior to any switch or parts replacement.
9004003
Backlite Heated Liftgate Glass Assembly: For rear window defrost inoperative concerns where heated glass electrical tab has become detached, it is not necessary to replace the glass assembly. For loose or detached electrical tab, refer to TSB 23-007-25 for repair procedures on reattaching a loose tab. For burned or discolored gridlines on hard tops, DO NOT change the complete Flipper glass assembly. This discoloration is oxidation of the ceramic silver material and is normal. The Engineering standard call out the fact that this bus bar will change in color and is not a deterioration of the material or performance.
09-011-25
Misfire Diagnostic Trouble Codes (DTCs), Rough Idle, Valvetrain Noise Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0301 - Cylinder 1 Misfire. ● P0302 - Cylinder 2 Misfire. ● P0303 - Cylinder 3 Misfire. ● P0304 - Cylinder 4 Misfire. ● P0305 - Cylinder 5 Misfire. ● P0306 - Cylinder 6 Misfire. Customers may comment on one or more of the following: ● Rough idle. ● Valvetrain noise.
S2323000002 REV.A
Washer Light On And Will Not Turn Off After Adding Washer Solvent.
105038
TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE
105039
TUBE - FUEL INJECTOR SUPPLY & GASKET - NONE
9100498 Rev 3
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. Refer to SOL # S2509000004. It is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software.
9100534 Rev 1
Transmission "Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, visible ""glitter"" or debris in the pan and fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback."
S2008000103 REV.B
No Start, Stop Start Inoperative, Battery or Check Engine Light (CEL) Illuminated
S2523000024
Rear Defogger Solder Terminals Detached.
103954
ACTUATOR - A/C AND HEATER
104087
ACTUATOR - A/C AND HEATER
S2509000004
Misfire DTCs, Rough Idle, Valvetrain Noise
S2523000010 REV.A
Exterior Rear View Mirror Stained And Will Not Clean.
S2523000015 REV.A
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
S2509000001 REV.A
Engine Rattle Noise
9100534
Transmission For transmission concerns related to DTCs P0733-00, P1DA8-00, and/or P1D92-00, a repair is available, and transmission replacement is NOT required. Please reference TSB 21-009-25 Rev. A, for details on D-clutch replacement. Please also note, fluid color/condition/odor is NOT an indicator of transmission health and should not be used as the reason for unit replacement. Complete unit replacements instead of repairs for these DTCs may be subject to chargeback.
103773
TOP KIT - SOFT
9100471
CANISTER Vapor -If an issue is detected with the Evaporative System Integrity Module (ESIM) Detector and not the Vapor Canister, only replace the ESIM Detector. -Before replacing the Vapor Canister due to Hard to Fill condition, replicate the condition at the Gas Station. If the condition is replicated, then check: 1) for kinked or pinched Clean Air Hose between the ESIM and the EVAP Air Filter; 2) for plugged EVAP Air Filter; 3) for kinked or pinched Vapor Hose between the Fuel Tank and the Vapor Canister. If the EVAP Filter is restricted, the replace the Filter. -Check if the Vapor Canister is flooded with fuel or the Recirculation Line has fuel. If fuel is found in the Vapor Canister or the Recirculation Line, then drop the Fuel Tank, remove the FDM Lock Ring to check if the internal Vapor Line is properly connected to the FDM Port. If the Vapor Line is not connected, then drain the fuel from the internal Vapor Line and properly connect to the FDM. Replace the Vapor Canister and the ESIM.
S2405000001 Rev B
Antilock Brake System (ABS) Module Will Not Initialize After Recent Service Replacement.
103986
D-23-04 Rev. H 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
103987
ID-23-03 Rev. I 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2509000002
Engine Noise
S2523000015
Replacement Exterior Mirror Glass Connector Does Not Match For Blind Spot.
9100498 REV 1
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets). Once it is confirmed that the repair will be done using the camshaft/Rocker arms kit, it is also important to confirm that the vehicle being repaired has the latest calibration/software update for oil pump operation mode (high pressure mode) during engine start up. RU, VF, WL & WD vehicles already include the latest oil pump mode in all 25MY and beyond. 24MY service releases are also available. JL & JT were updated as a running change in 24MY and beyond (08/15/24 & 08/19/24 respectively). 24MY service releases available. DT was updated starting 25MY and beyond. If the vehicle to be repaired is a 24MY vehicle with a service release available, please follow the released service procedures to update to the corresponding calibration/software update.
S2523000010
Exterior Rear View Mirror Stained And Will Not Clean.
S2509000001
Engine Rattle Noise
S1819000004 REV.Q
Shimmy Felt In Front End
S2323000004 REV.A
Defogger Is Not Working. Terminal Detached From The Glass.
23-007-25
Rear Defroster Inoperative Customers may experience one or more of the following: ● Rear window is not defrosting. ● The rear window glass left or right side defrost solder terminal is detached from the defrost grid. This bulletin involves replacing the Electric Backlite (EBL) wire connector repair and re-securing the electrical connector(s) to the rear window
S2008000084 REV.C
Cluster Warning Lamp is on, Service 4WD Message
9100498
3.6L PSU Long Block Misfire DTC codes and/or rough idle and/or valvetrain noise. These conditions may be related to worn intake camshaft high lift lobe(s), and intake rocker arm(s) high lift slider. High mileage failure (10,000-60,000 miles). 1. Remove the valve cover(s) per the released service procedures. The use of a stethoscope or DTC specific cylinder misfire codes can help to locate the condition to the left or right bank. 2. Once it has been visually confirmed that there is wear on the high lift intake lobe(s) & rocker arm(s) slider, there is a special service kit for this type of repair which should be used, instead of replacing the complete engine/long block. This kit contains the parts required for the repair (intake cam, rocker arms, sealer and gaskets).
S1408000384 REV.H
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS Related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
102384
EVAPORATOR - AIR CONDITIONING
S2405000001 REV.A
Antilock Brake System (ABS) Module Will Not Initialize After Recent Service Replacement.
S1408000384 REV.G
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100468
FUEL VAPOR CANISTER FILTER EVAP Fuel Filters are to be checked for restriction / blockage on a regular schedule as indicated in the Owner s Manual. If the Filter is restricted or blocked then replace the part. For customers that drive light duty trucks in extreme dusty and dirty road conditions, please reference information only TSB 25-009-24 for an available MOPAR Dual EVAP Filter kit that is customer paid.
101792
FILTER - AIR
101816
FILTER - AIR
9100363 Rev1
Turbocharger Kit Please note many parts of the Turbo Assembly can be serviced separately and complete turbo replacement may not be necessary. If the Turbo is being replaced for a noise or a rattle, inspect the wastegate for binding. The actuator kit is serviced separately. If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed oring for a leak. The o-ring is serviced separately
102300
Warranty Bulletin D-23-04 Rev. G 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
102315
Warranty Bulletin ID-23-03 Rev. H 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2323000074 REV.A
Buzz Squeak Rattle (BSR) From Sound Bar Or Sport Bar Area.
S2423000050
Buzz Squeak Rattle (BSR) From Speaker Sound Bar At High Volume Level.
101684
COVER KIT - HOOD
101285
DAMPER - NONE
101613
FCA Caribbean Warranty Bulletin ID-23-10 Rev. A (XF1) Steering Damper – Select 2018 - 2020 Jeep Wrangler (JL), 2020 Jeep Gladiator (JT) and 2018 Jeep Wrangler (JK)
19-002-24 REV. A
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
101611
Warranty Bulletin D-23-09 Rev. A (XF1) Steering Damper – Select 2018 - 2020 Jeep Wrangler (JL), 2020 Jeep Gladiator (JT) and 2018 Jeep Wrangler (JK)
19-002-24
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
S2423000045
Heated Steering Wheel Inoperative And Or Not Hot Enough.
101232
Plate - Planetary
101137
Warranty Bulletin D-23-04 Rev. F 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
101140
FCA Caribbean Warranty Bulletin ID-23-03 Rev. G 2018 - 2024 Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
100875
Warranty Bulletin D-23--04 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
100876
FCA Caribbean Warranty Bulletin ID-23-03 Rev. F 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2405000001
Antilock Brake System (ABS) Module Will Not Initialize After Recent Service Replacement.
100192
BOW - FOLDING TOP
S2422000002
Low Tire Pressure. Tire Valve Stem And Tire Pressure Monitor (TPM) Sensor Service.
100164
PUMP – WATER & CONNECTOR - OIL COOLER TUBE
S2123000046 REV.B
Click Noise From Front End While Driving And Or Turning.
S1819000004 REV.P
Shimmy Felt In Front End
99659
WHEEL - STEEL
99885
WARRANTY BULLETIN D-23-04 2018 - 2024 (Current) Jeep Wrangler (JL) and 2020 - 2024 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. D)
S2403000002
Griding/Gear Clash From Transfer Case When Going Into 4WD, Above 5 mph (8 kph).
31-001-24
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
98931
PUMP – WATER & CONNECTOR - OIL COOLER TUBE
98933
PUMP – WATER & CONNECTOR - OIL COOLER TUBE
S1408000384 REV.F
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100360
SWITCH Power Window Before replacing the window switch, please follow these steps: 1.- Review the master window Switch for any physical issue (Button stuck, broke). If not, physical issue is found move to next step 2.- Make sure all the switches harness are properly connected, disconnect the switch and reconnect it, and reverify the issue. If after performing these steps the switch remains faulty, please replace the switch
94006
WIPERUNIT - WINDSHIELD WIPER, BLADE - FRONT WIPER
98861
WIPERUNIT - WINDSHIELD WIPER, BLADE - FRONT WIPER.
S2307000002 REV.B
Suspected Engine Coolant Leak
S1723000037 REV.A
Freedom Panel Underside Rough And Or White Coating Flaking
23-041-24
Air Trapped in Steering Damper Warranty Extension XF1 A shimmy in the steering wheel after hitting an irregularity on the road surface (symptom is more prevalent in cold temperatures). This bulletin involves replacing the steering damper.
9100010
Axle Assembly Do not replace the Axle for Axle Locker Sensor failure. The parts kit (SENSOR KIT, Axle: 68544629A$) must be used to repair the Axle Locker Sensor on JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). Internal axle components are serviceable. Complete axle assemblies should not be replaced unless necessary due to damaged housing. Over repairs may be subject to chargeback.
9100344
VALVE BODY & CONTROL UNIT Transmission Ensure clutch pressure check has been completed and documented prior to valve body replacement.
94519
HEADLAMP
S2307000002 REV.A
Suspected Engine Coolant Leak
9100337
PUMP WATER For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
0300224
Front and Rear Axle Sensor Kit **Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set: ? C1451-11 - Service Axle Locker System** Customers may also comment on a Service Axle Locker message displayed in the Electronic Vehicle Information Center (EVIC) for this condition.
ReferenceY40A
Revised Customer Satisfaction Notification Y40 ? Control Module Software Updates
0802024
Floor Console USB Inoperative Customers may comment on the following: ? Customer states the Apple Carplay/Android Auto? does not work or is intermittently working when their device is plugged into the center console bin USB port. This replacing the center console USB cable.
S248A000001
SOS and Assistance Call Not Working After Radio Exchange Unit Installed
ReferenceY40
Customer Satisfaction Notification Y40 Control Module Software Updates
S1408000384
Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
9100276
Spring Front Upr - Isolator Before replacing this part. Please contact FCA REDACTED CONTENT. ~ If no response in 15 minutes, proceed with repair.
S2309000013
Verifying Camshaft Diagnosis
S2323000081
Buzz Squeak Rattle (BSR) From Rear Seat Area.
S1808000057
Inspecting And Disconnecting Negative Battery Cables On ESS Vehicles
9100229
LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
S2323000073
Exterior Mirror And Or Blind Spot Inoperative.
9100226
Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
S2323000074
Buzz Squeak Rattle (BSR) From Sound Bar Or Sport Bar Area.
S2221000003
8-Speed Transmission, Additional Transmission Fluid Leak Inspection/Repair Guidelines.
S2319000007
Squeak Noise From Dash Area When Turning The Steering Wheel.
S2323000071
Front Door Window Will Not Roll Down All The Way. Window Stops Part Way Down.
9100212
PUMP Water For 2016-2024MY 3.6L Pentastar Upgrade with suspected coolant leak. PRIOR TO PERFORMING ANY WATER PUMP REPLACEMENT, PROCEED WITH INSPECTION INSTRUCTIONS FROM THE LATEST VERSION OF STAR ONLINE PUBLICATION S2307000002. Please submit pictures of the leak area thru the DIDI process outlined in the STAR Online document. NOTE: Some coolant residue may be found at the water pump weep hole plug area which may be normal, but coolant should not be dripping from this location. If unsure about, use the Pressurized Coolant System Inspection process as found in the Dealer Connect Cooling Diagnosis and Testing Procedures.
9100209
Switch-Mirror Before replacing this Switch, please follow the service procedures to properly diagnose it 1) Remove the switch 2) Please check the continuity on each pin of the switch based on the table found in the service Procedures. If after testing switch is still faulty, please call FCA Redacted Content. If no response after 15 minutes, proceeds with switch replacement.
S2307000002
Suspected engine coolant leak.
93023
Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
93120
FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
S238A000042
Media Hub USB Connection Drops, Or Apple CarPlay and Android Auto Inoperative.
S1919000004
U0131-00-LOST COMMUNICATION WITH POWER STEERING CONTROL MODULE ?A?. Service Electric Power Steering Message On Cluster.
S2008000031
Low Charging Voltage Displayed On Cluster
2308923
Rear Defroster Inoperative Customer may experience the following: ? Rear window is not defrosting ? The rear window glass left or right side defrost solder terminal is detached from the defrost grid. This bulletin involves replacing the Electric Backlite (EBL) wire connector repair and re-securing the electrical connector(s) to the rear window.
S2108000093
Apple CarPlay Does Not Work Or Not Connecting
S1808000152
CEL (Check Engine Lamp) Illuminated, P057B Brake Pedal Position Sensor Performance
9100196
Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
ZD7
Customer Satisfaction Notification ZD7 - Radio Software update
9100185
ELECTRIC HYDRAULIC POWER STEERING PUMP Prior to replacing this component for damage at the pump electrical connection, please contact FCA redacted content. If no response in 15 minutes, proceed with repair.
9004433
PUMP, Vacuum For DTC Code P258B - ELECTRONIC VACUUM PUMP PERFORMANCE. Due to brake vacuum pumps returned with trouble not found, please follow the proper diagnostics outline in the service library this also includes checking all electrical and vacuum hose connections prior to replacement of the vacuum pump. This will avoid unnecessary repair and potential charge back on the vacuum pump.
0816623
Flash: Battery Pack Control Module (BPCM) Diagnostic and System Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ?**P0A80-00 - Replace Hybrid/EV Battery Pack. ? P0EDD-00 - Contactor Wear Counter Far Advanced.** ? P0AC5-00 - Hybrid/EV Battery Temperature Sensor "B" Circuit. ? P2B28-00 - Hybrid/EV Battery Pack Coolant Pump Performance. ? P0A1F-09 - Battery Energy Control Module A Internal Performance-Component Failures. ? P1A1E-00 - Hybrid Thermal System Control Circuit. ? P0A94-03 - DC/DC "A" Converter Performance-FM/PWM Failures. ? P0A94-05 - DC/DC "A" Converter Performance-System Programming Failures. ? U0293-00 - Lost Communication With Hybrid Control Module. ? U1886-00 - Battery Energy Control Module Lost Communication With ECM/PCM. In addition, the customer may comment on one or more of the following conditions: ? **Battery light on in the Instrument Panel Cluster (IPC).** ? Extremely short auto-stops during a 0 °C (32 °F) temperature. This bulletin involves updating the BPCM with the latest available software.
2308323
Sunvisor Rocking or Loose One or both sunvisors rocking or are loose This bulletin involves adding foam pads to both sunvisor body mounts.
92177
Warranty Bulletin D-23-04 - 2018-2023 (Current) Jeep Wrangler (JL) and 2020-2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. B)
92187
FCA Caribbean Warranty Bulletin ID-23-03 - 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. B)
91872
Warranty Bulletin D-23-09 (XF1) Steering Damper - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
91883
FCA Caribbean Warranty Bulletin ID-23-10 (XF1) Steering Damper - Select 2018 - 2020 Jeep Wrangler (JL) and 2020 Jeep Gladiator (JT)
S2325000006
Customer complaint may include a MIL-on or check engine lamp on condition.
ReferenceZD7
Customer Satisfaction Notification ZD7 - Radio Software Update
0814423
Flash: Hybrid Control Processor (HCP) Updates The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): ? **P0C01-00 - Drive Motor A Current High. ? P0C05-00 - Drive Motor A Phase U-V-W Circuit/Open.** ? P0507 - Idle Speed Performance Higher Than Expected. **In addition the customer may notice the following: ? Loss of 12V charging (Battery Light) and/or loud noise from MGU motor.** This bulletin involves updating the HCP with the latest available software and if necessary replacing the Motor Generator Unit (MGU).
S2323000043
Gate bumber falls.
BulletinA
Customer Satisfaction Notification ZD7 - Radio Software Update
S2309000002
MIL lamp-on. Engine noise, rattle. Misfire or rough running.
0700723
Water Quality When Mixed With Engine Coolant
S238A000024
SOS, Assistance Calls Not Successful After Radio Replacement or Radio Software Update
9100133
ROCKER ARM ASSY - ROLLER ROCKER Case 1.- Before replacing the intake or exhaust rocker arms due to an abnormal ticking noise, please check that the INTAKE Hydraulic Lash Adjusters are not "collapsed". If a collapsed INTAKE HLA is found, replace all INTAKE HLAs on the suspect cylinder head (no need to replace rocker arms). The noise can occur at low or high RPMs, and at low or high temperatures. There are no Diagnostic Trouble Codes (DTC)s present. Case 2.- If the INTAKE camshaft or INTAKE rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
9100143
PSU right intake camshaft Case 1) If you are to flash the PSU (Pentastar Upgrade Engine) PCM due to P0300 code presence, only AB or previous LEVEL PSU right intake camshaft PN 05047913AA or AB (old version) should be replaced. If the engine is equipped with the AC/AD LEVEL PSU right intake camshaft PN 05047913AC or AD (new version), camshaft should NOT be replaced. Case 2) If the intake camshaft or intake rocker arm has excessive wear on the high lift profile (Rocker arm: slider, Camshaft: central lobe), replace the intake camshaft (1) in that cylinder head and all intake rocker arms (6).
1804823
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
S2307000001
Customer complaint may include a coolant leak, or, a coolant leak is detected during a routine oil change inspection.
9003357A
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9003357a
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
89211
Warranty Bulletin D-23-04 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. A)
89216
International Warranty Bulletin ID-23-03 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification (Rev. A)
S228A000028
Radio Remained On After Ignition Is Switched Off, Dead Battery From Excessive Radio Current Draw
9003357
ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
9100134
Engine When replacing a GMET4 long block from a 2021 JL or older, you will need to carry over the injector wiring harness from the original engine, and the Fuel pressure sensor should be replaced with part number: 68212572AB.
2302023A
Corrosion on Door, Hood And/or Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim (Fig. 1) .Zinc Shim
2302023a
Corrosion on Door, Hood And/or Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim (Fig. 1) .Zinc Shim
89079
Warranty Bulletin D-23-04 2018 - 2023 (Current) Jeep Wrangler (JL) and 2020 - 2023 (Current) Jeep Gladiator (JT) - Corrosion Warranty Claim Simplification
S2308000012
Rear Wiper Does Not Turn On
3100123
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S1819000004
Shimmy Felt In Front End
2302023
Corrosion on Door hood Swing Gate Hinges Corrosion found on the door, hood and/or swing gate hinge(s). This bulletin involves inspecting and replacing any hinge exhibiting corrosion. The replacement hinge is equipped with a Zinc shim. (Fig. 1) .Zinc Shim
S2323000004
Defogger Is Not Working. Terminal Detached From The Glass.
08-003-22 REV. A
UAQ and UCQ Radio Enhancements Customers may experience one or more of the following: ? **Wi-Fi hotspot connection failure. ? Speaker popping, crackle noise during Voice Recognition (VR) response and navigation guidance. ? Mobile Station Integrated Services Digital Network (MSISDN) missing from radio, no connected services working.** ? Intermittent, black radio display screen (Rear View Camera (RVC) not affected). ? Intermittent, radio freezes (RVC not affected). ? Wireless connectivity pairing and/or connection issues. ? Lost radio presets. ? Radio channels change by itself. ? SXMT icon inoperative. ? SXMT favorite song not displaying/playing. ? Incorrect navigation address/location/directions. ? Backup camera has black display screen or only displays Check Entire Surroundings with black screen (occurs when vehicle is shifted immediately to reverse upon key-on before RVC signal is received, recoverable with key cycle) . ? High pitch chime noise. ? Contact list not loading. ? Device not supported message. ? Remote app inoperative. ? Travel-Link fuel price incorrect. ? Backup camera gridlines missing. ? Unable to adjust volume. In addition, the following enhancement are included in this update: ? Enables map updates. ? Heavy Duty (HD) Truck USB HUB improvements. ? HD Truck heated steering wheel improvements This bulletin involves inspecting and if required, updating the radio software level to 40.1. Depending on the radio?s current software level the radio may need a one or two USB update.
31-002-22
Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
S2208000138RevA
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
0901222
Spark Knock/Engine Symptoms This bulletin involves cleaning the piston heads and cylinder head combustion chambersto resolve a spark knock condition being caused by oil intrusion through the PCV system. The customer may describe a knocking or pinging noise coming from the engine upon acceleration.
1814422
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P2C90 - Crankcase Ventilation System - Hose "A" Disconnected. P04FC - Crankcase Ventilation System Performance. P0456 EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. Customers may also describe the following condition:Excessive fan noise when the A/C is on MAX output. Other enhancements included in this update: Electric vacuum pump (EVP) update. Fan noise reduction.
9004219
PUMP, Water (Water Pump Inlet Tube) For concern of leak at water pump, please check and re-torque water pump inlet tube fasteners as described in Service Bulletin 07-001-20 before replacing the water pump. Please also check the gasket from the block to the water pump. This gasket can be serviced separately.
S2223000063
Ambient Temperature Sensor Servicing.
S2003000001RevE
Noise From The Front Axle Area Over Bumps
S2008000103RevA
No Start, Stop Start Inoperative, Battery or Check Engine Light (CEL) Illuminated
3100122
Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
85230
CABLE - FRONT SEAT
S2207000002
Coolant leak
S2223000054
Washer Inoperative, Weak Or No Spray. Low Washer Indicator May Be Illuminated.
0300322
Front or Rear Axle Sensor Kit
S2008000075RevA
No Start, Start Stop Inoperative, Cluster Message Service Start Stop System
S2208000138
Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
S228A000004RevB
Panasonic VP4R Wi-Fi New Enrollment Pause
S2108000270RevB
Sky Slider Power Top Does Not Operate. New Power Top Motors Inoperative
S1908000122RevA
Air Bag Warning Lamp On, Service Air Bag Message Displayed On Cluster
S228A000004RevA
Panasonic VP4R Wi-Fi New Enrollment Pause
S2108000270RevA
Sky Slider Power Top Does Not Operate. New Power Top Motors Inoperative
9004472
complete wiring harness Before replacing this harness, please check for an available connector repair kit at the following: http://connectors.dcctools.com/home.htm;jsessionid=C6A3F1B696B030953878BF34FE86A8FE If a connector repair kit is not available on the website contact FCA Redacted Content to see if an alternative repair kit is available for your application prior to ordering the harness. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
9004473
complete wiring harness Before replacing this harness, please check for an available connector repair kit at the following: http://connectors.dcctools.com/home.htm;jsessionid=C6A3F1B696B030953878BF34FE86A8FE If a connector repair kit is not available on the website contact FCA Redacted Content to see if an alternative repair kit is available for your application prior to ordering the harness. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S228A000004
Panasonic VP4R Wi-Fi New Enrollment Pause
S2019000005RevB
U0131 Lost Communication With Power Steering Control Module A DTC Active Or Stored. EPS Light On.
0700122
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
0700122REVB
Water Pump Inlet Tube Fastener Torque
0807622
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates
S2209000004
If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
S2223000029
Rattle Noise From Door
0700122 REVA
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fastenersto possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
S2208000073
No Start, After Flash And Or PCM Replace, DTC P0513 Invalid Skim Key Setting
S1708000118
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
S1708000118 RevB
Battery Drain Concern, Dual USB Port Normal Operational Draw, Extended Illumination Or Extended Operation After Key Off
9004465
AXLE, Service Rear A new parts kit (SENSOR KIT, Axle: 68544629AA) is available to repair the Axle Locker Sensor on the 2018 - 2022 JL/JT equipped with the M210 and M220 Tru-Lok axles (DSE). This new parts kit must be used when only the Axle Locker Sensor fails.
700122
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
CSNY95
Customer Satisfaction Notification Y95 Steering Assist
S2208000022
No Crank, No Start, Battery Light On
S2208000025
ABS Lamp On, U0121 Lost Communication With ABS Module, Stop Start Inoperative U0037-00 LIN BUS
S2208000028
Connected Services Will Not Work After Radio Replacement
S2223000001
Rattle Noise From Power Top Driving Over Bumps Or Rough Road
Y95
Customer Satisfaction Notification.
08-003-21 REV. A
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed, this may lead to undesired handling characteristics. The customer may describe one or more of the following: Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2123000079
Wind Noise And Or Water Leak From Door Seal Area
S2108000270
Sky Slider Power Top Does Not Operate, New Power Top Motors Will Not Power Operate To Calibrate
V41 Combo Rev8
Customer Satisfaction Notification V41 Steering Damper
05-006-21
Rear Caliper Adapter Bolts Are Loose Or Missing This bulletin includes replacing all four rear caliper adapter bolts if loose or missing. Customers may comment on one or more of the following:Click or clunk from the rear of the vehicle. A missing or loose rear brake caliper adapter boltFig. 1.Missing And Loose Caliper Adapter Bolts
S2108000204
Radio Lockup In The Software Installation Screen After Accepting FOTA Update (Incorrect "S2008000204" indicated on published document)
04-001-21
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
S2108000198
Media Device Connection Guidelines For Bluetooth, Apple CarPlay, Android Auto Or USB To The Radio Head Unit
S1918000008
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
S1918000008RevC
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
08-133-21
UAQ and UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to: 39.6.The repair procedure must be followed step by step. If the radio is not updated with the correct software level at the correct time the radio can be damaged. If the radio was damaged by not following the repairprocedure the radio may need to be replaced. Customers may experience one or more of the following: Lost radio presets. SXM favorite song not displaying/playing. Radio display screen is black, intermittent. Radio freeze intermittent. Incorrect navigation address/location/directions. Bluetooth pair or connection issue. Radio channel change by itself. SXM icon inoperative. Backup camera has black display screen. High pitch chime noise. Contact list not loading. Device not supported message. Remote app inoperative. Travel-Link fuel price incorrect. Backup camera gridlines missing. Unable to adjust volume. In addition the following enhancements are included: Heavy Duty (HD)Truck USB HUB improvements. HD Truck heated steering wheel improvements.
S2108000184
Cluster Warnings To Service SOS System, Service Air Bag System, Blind Spot Unavailable, Or Park Sense Not Available Messages
S2108000184REVA
Cluster Warnings To Service SOS System, Service Air Bag System, Blind Spot Unavailable, Or Park Sense Not Available Messages
S2108000172
Stop Start Feature Is Inoperative, MIL Lamp On, Hood Switch DTC?s
S2108000170
Head unit button stuck DTC code B14DA-2A
S2108000167
Air Bag Lamp On, DTC B00DF-95 Passenger Restraints Disable Switch-Incorrect Assembly
S2108000163
No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
S2109000004
Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
S2023000017RevA
Whistle Wind Noise From Windshield Area.
S1918000008RevB
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
S2123000049
RHD Glove box cannot be fully opened
S1809000007
Customer Complaint May Include Engine Oil Leak Or Consumption
S1809000007RevC
Customer Complaint May Include Engine Oil Leak Or Consumption
S2108000146
Check Engine Lamp Comes On, CAN C Loss Communication DTC?s Setting Stored Or Active Intermittently
S2123000048
Wind Whistle Noise From A Pillar Area At Highway Speed
S2108000143
Right Side Head Lamp, DRL Lamp Or Turn Signal Inoperative
S2123000046
Click Noise From Front End While Driving And Or Turning
9004386
WIRING, Body Before replacing this harness, please contact FCA Redacted Content to see if a repair kit is available for your application. If no response in 15 minutes, proceed with repair. Please email pictures of harness defects to FCA Redacted Content
S2008000059RevA
Error Code 20 Message On the Radio Screen
2302021
Front Passenger Outer Seat Bolster Foam is Collapsed This bulletin includes repositioning the passenger outer seat bolster and installing a strap and push pin to help prevent this concern from happening again. Customers may comment on the following: The front passenger outer seat bolster cushion is missing
S2108000136
Intermittent Audio With Sky Roof Partially Open
S2123000042
One Touch Sky One Power Roof Reversing When Closing
S2108000127 Rev.
Radio Reboot Continually
S2108000127-1
Radio Reboot Continually
S2108000127REVA
Radio Reboot Continually
S2108000127RevA
Radio Reboot Continually
S2108000130
Bubbles Or Delamination On The Radio Display
S2108000119
Apple CarPlay Malfunctioning, Does Not Launch Or Is Cutting In An Out On Wired And Wireless Connection, Radio Stuck When IPhone Is Connected
S2108000127
Radio Reboot Continually
08-093-21
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. This is part of a two step FOTA update, first update brings software level to 22.61 and this second FOTA update will take the software to 22.64. National launch for this second step is May 24, 2021. Customers may experience one or more of the following:Navigation is incorrect or can not calculate route. GPS locations is inaccurate. Uconnect radio apps are all inoperable. Backup camera screen is blue (DT and KL). Green horizontal lines appear across screen (DT and KL). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio reset intermittently. Unable to adjust audio volume. Unable to switch modes between AM, FM, SAT or Media. In addition the following enhancements are included in this update:Carplay® connectivity improvement. Improvement to Bluetooth® phone pairing. Bluetooth devices unresponsive. Improved sound quality when using a Bluetooth phone.
0809321
UAS, UAQ, UCS, UAV, UCV and UCQ Radio Over The Air Software Version Updates This bulletin provides information regarding the latest Flash Over The Air (FOTA) update and provides the service technician an overview of the steps a customer will need to take to complete the update. This is part of a two step FOTA update, first update brings software level to 22.61 and this second FOTA update will take the software to 22.64. National launch for this second step is May 24, 2021. Customers may experience one or more of the following:Navigation is incorrect or can not calculate route. GPS locations is inaccurate. Uconnect radio apps are all inoperable. Backup camera screen is blue (DT and KL). Green horizontal lines appear across screen (DT and KL). Anti-theft code request message. Backup camera screen is blank. Lines appear across screen. Radio control screen is blank or locked. Radio reset intermittently. Unable to adjust audio volume. Unable to switch modes between AM, FM, SAT or Media. In addition the following enhancements are included in this update:Carplay® connectivity improvement. Improvement to Bluetooth® phone pairing. Bluetooth devices unresponsive. Improved sound quality when using a Bluetooth phone.
S2008000010
Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
S2008000010 Rev.
Apple Carplay Inoperative Or Not Working, Phone Not Pairing, Carplay Lockup, Freeze or Audio Concerns
24-007-21
Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
2400721
Flash: HVAC Diagnostic and System Updates This bulletin involves reprogramming the HVAC control module with the latest available software. The customer may notice one or more of the following:Intermittent change of smell or humidity level in vehicle. An intermittent blast of warm air when A/C is on. Intermittent increase of outside air through the HVAC system. In addition, the following software enhancement is also available:Improvements for customer concerns of 'cabin too warm', specifically in the mid ambient temperature range 4.5-15.5 °C (40-60 °F).
S2108000120
Radio Volume Uncontrollable Or Changing On Its Own
S1809000007 Rev.
Customer Complaint May Include Engine Oil Leak Or Consumption
S2023000011
Wind Noise And Or Gap At Front Door Mirror Flag
S2023000011 Rev.
Wind Noise And Or Gap At Front Door Mirror Flag
S2123000029
Squeak and or Chirp Noise From Lift Gate Glass
74244
Warranty Bulletin D-20-23 Part Order Restriction Program - 48V Power Pack Unit (PPU) - Select 2018 - 2021 Jeep Wrangler (JL) and 2019 - 2021 RAM (DT) (Rev. A)
08-070-21
ULQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 34.2. If the software update is performed on a radio with software below 19.9, the radio could be damaged and will need to be replaced. Customers may experience one or more of the following:Lost radio presets. Radio display screen is black when the ignition is on. Radio may reset, turn itself off and then back on again. Park assist chime will continue to chime after the vehicle is turn off. Radio will display the incorrect speed limit in kph when approaching a road speed camera. In addition the following enhancements are included:Voice Recognition (VR) and Bluetooth® improvements. Improvements for Off-road pages.
0807021
ULQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 34.2. If the software update is performed on a radio with software below 19.9, the radio could be damaged and will need to be replaced. Customers may experience one or more of the following:Lost radio presets. Radio display screen is black when the ignition is on. Radio may reset, turn itself off and then back on again. Park assist chime will continue to chime after the vehicle is turn off. Radio will display the incorrect speed limit in kph when approaching a road speed camera. In addition the following enhancements are included:Voice Recognition (VR) and Bluetooth® improvements. Improvements for Off-road pages.
S2023000020
Tick Noise From A-pillar Front Power Top Side Rail
S2023000020 Rev.
Tick Noise From A-pillar Front Power Top Side Rail
08-055-21 REV. A
Key FOBIK Shortage and Restriction This bulletin is to inform customers, FOBIKs will be on restriction due to a temporary semi conductor shortage. Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
08055211
Key FOBIK Shortage and Restriction This bulletin is to inform customers, FOBIKs will be on restriction due to a temporary semi conductor shortage. Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
S1608000226
Battery Tester Warranty Code Procedures, Midtronics Charger Update Process
S2008000113
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S2008000113 Rev.
No Start Intermittently, Vehicle Requires Multiple Keyless Push To Start Attempts To Start Vehicle, Intermittent Key Not Detected Message
S16080002261
Battery Tester Warranty Code Procedures, Medtronic Update Process
S1821000001
Gear Ratio DTC?s, Transmission Shift Concerns, Does Not Shift At Times, Shudders
18-036-21
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P02EE - Cylinder 1 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02EF - Cylinder 2 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02F0 - Cylinder 3 Injector Circuit Performance(APAC, EMEA and LATAM Only). P02F1 - Cylinder 4 Injector Circuit Performance(APAC, EMEA and LATAM Only). P2C90 - Crankcase Ventilation System - Hose "A" Disconnected(APAC, EMEA and LATAM Only). P04FC - Crankcase Ventilation System Performance(APAC, EMEA and LATAM Only). P2453 - Particulate Filter Pressure Sensor "A" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter(GPF)). P245F - Particulate Filter Pressure Sensor "B" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF)). P0456 - EVAP System Small Leak.If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). P050B - Cold Start Ignition Timing Performance(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). Customers may comment on one or more of the following:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. The following software enhancements are also included in this update:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
1803621
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may f Customers may comment on one or more of the following: Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. The following software enhancements are also included in this update : Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
9004307 Rev. A
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available.
9004307A
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available.
23-014-21
Soft Top Wear Due To Contact With Number Two Bow Side Frame Link This bulletin includes inspecting the soft top in the closed position for wear or holes and applying anti-wear tape. Customers may comment on one or more of the following:Wear on soft top cover. A hole in soft top cover.
2301421
Soft Top Wear Due To Contact With Number Two Bow Side Frame Link This bulletin includes inspecting the soft top in the closed position for wear or holes and applying anti-wear tape. Customers may comment on one or more of the following:Wear on soft top cover. A hole in soft top cover.
08-055-21
Key FOBIK Shortage and Restriction This bulletin is to inform customers, technicians and sales staff that vehicles are being delivered with only one key FOBIK due to a temporary semi conductor shortage. The customer may notice that they only have one key FOBIK when the vehicle was delivered or need an additional key FOBIK due to a lost or damaged keyFOBIK.Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
0805521
Key FOBIK Shortage and Restriction This bulletin is to inform customers, technicians and sales staff that vehicles are being delivered with only one key FOBIK due to a temporary semi conductor shortage. The customer may notice that they only have one key FOBIK when the vehicle was delivered or need an additional key FOBIK due to a lost or damaged keyFOBIK.Key FOBIKs to service customer vehicles are limited to customer vehicles which are inoperable and a spare FOBIK is not available.
S2123000022
Steering Damper Mounting Information
9004009
Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
9004307
TRANSMITTER, Integrated Key FOB Due to a global semiconductor shortage, service availability of this part is limited. To maintain production and service requirements, FOBIKs affected by the shortage will be available on an ?as required basis?. This FOBIK should only be ordered in the event the vehicle is inoperable, and there are no other FOBIKs available. It is requested the customer uses their spare FOBIK until supply is once again available. On some 2021 vehicles, they will be sold with only one FOBIK, and will have sales code ?GXZ?. For these vehicles a CSN (Customer Satisfaction Notification) will be released to replace the FOBIK once supply is available. A unique part number will be used for this campaign. For these vehicles, only order a replacement FOBIK in a vehicle down situation. Due to the global shortage, once service inventory of this part is depleted, there may not be any additional parts available for service for an extended period of time. This may cause customer dissatisfaction and extended vehicle down time. We appreciate everyone?s consideration and cooperation to only order this part in a vehicle down situation.
S2123000020
A Buzz, Squeak, Rattle (BSR), Clicking Noise Heard From Left Side Of The Freedom Top.
S1908000048 Rev.
Chime Stuck On In The Audio System
S1908000048RevB
Chime Stuck On In The Audio System
S2108000080
Radio Replacement Reset Routine, Radio Has Missing Icons Or Are Grayed Out
08-045-21
UGQ Radio Enhancements This bulletin involves inspecting and if required updating the radio software to:28.3 - 2018 MY 34.21 - 2020 MY Customers may experience one or more of the following: Intermittently, the radio screen will black out after key is turned on(For 34.21 Only). Navigation screen freezes after a Voice Recognition (VR) command. Warning chime will not turn off. Radio display black, except application bar. Language setting reverting from customer set language to Italian language. Message displayed ?TomTom live services unavailable?. Frequent pop-ups during startup saying device not connected - Uconnect LIVE. Uconnect Live feature may not function properly. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay. In addition the following enhancements are included:Bluetooth improvements. VR improvements. Russian language enhancements.
0804521
UGQ Radio Enhancements This bulletin involves inspecting and if required updating the radio software to:28.3 - 2018 MY 34.21 - 2020 MY Customers may experience one or more of the following: Intermittently, the radio screen will black out after key is turned on(For 34.21 Only). Navigation screen freezes after a Voice Recognition (VR) command. Warning chime will not turn off. Radio display black, except application bar. Language setting reverting from customer set language to Italian language. Message displayed ?TomTom live services unavailable?. Frequent pop-ups during startup saying device not connected - Uconnect LIVE. Uconnect Live feature may not function properly. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay. In addition the following enhancements are included:Bluetooth improvements. VR improvements. Russian language enhancements.
S2003000001 Rev.
Noise From Front Axle Area Over Bumps
S2003000001ReVD
Noise From Front Axle Area Over Bumps
S2123000015
Creak Tick Pop Noise From Door Or Doors
S1821000005 Rev.
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
S1821000005RevA
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
9004017
CAMERA, Rear View For concerns of back up camera flicker/blank/blue/black screen or camera inop, please ensure Radio is at latest software level. After update, system requires three sleep cycles to function properly. Please verify camera LVDS- Low-Voltage Differential Signaling cable connection at camera and radio head unit. Also verify harness connection between high mounted stop lamp and body harness for bent pins or loose connection at XY310A, XY485A inlines. Please create and send a copy of the vehicle scan report and specify radio SW version and radio head unit ID toFCA Redacted Content or call FCA Redacted Content for any additional questions or assistance needed. If no response in 15 minutes, proceed with repair. Please be sure to attach a copy of the Vehicle Scan Report on the repair order.
S2108000045
Favorite Song On-Air Alert List Empty
S2108000047
Jeep Off Road Pages Missing Latitude And Longitude Coordinates
S2019000005 Rev.
U0131 Lost Communication With Power Steering Control Module A DTC Active. EPS Light On.
S2019000005RevA
U0131 Lost Communication With Power Steering Control Module A DTC Active. EPS Light On.
S1808000233 Rev.
The Passive Entry Door Handle Does Not Unlock The Door And B25A3-00 Or B25A4-00 May Be Active
S1808000233RevA
The Passive Entry Door Handle Does Not Unlock The Door And B25A3-00 Or B25A4-00 May Be Active
08-017-21
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.34. Customers may experience one or more of the following: Radio display screen flickers. Clock loses 6 seconds per day (JL with 5 inch screen). Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth® device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7 on JL vehicles only). Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto,® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop.
S2123000004
Front Wheel Well Liner Contacting Tire And Or Loose
71838
Warranty Bulletin D-18-16 Rev. B Mopar Windshield Made With Corning Gorilla Glass (Rev. B)
S2123000003
Buzz Squeak Rattle From Floor Dash And Interior Items
S1918000008 Rev.
Customer?s complaint may include a MIL-on with one or more of the following DTCs (Active, Pending, or Stored) in the PCM: P0133, P0137, P0171, P0300, P2096. The root cause could be due to oil leaking from Bank 1 valve cover seal on to the 1/2 (Bank 1 downstream) O2 sensor. This can adversely affect the 1/2 O2 sensor signal reading and lead to listed DTCs. Before performing normal diagnostic routines for the above codes, check for the condition listed above.
S2008000031 Rev.
Low Charging Voltage Displayed On Cluster
S2123000002
Exterior Rearview Mirrors Inoperative And Or Intermittent Operation.
08-003-21
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed, this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S1908000083 Rev.
Check Engine Light Illuminated, Stop Start Function Inoperative
70801
Warranty Bulletin D-20-23 Part Order Restiction Program - 48V Power Pack Unit (PPU) - Select 2018-2020 Jeep Wrangler (JL) and 2019-2021 RAM (DT)
08-074-20 REV. F
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
9004335
Turbocharger If the turbo is being replaced for an oil leak concern, please inspect the area around the turbo oil feed o-ring for a leak. The o-ring is serviced separately and complete turbo replacement may not be necessary.
S1908000102 Rev.
(Rev. A) Audio Mute On All Sources Except AM
08-074-20 REV. E
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following: Steering wander. Vehicle has a lead/pull to the right or left. The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering/Linkage/Damper, Steering/Removal and Installation.
0807420E
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all steps necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excessive play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
08-074-20 REV. D
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
0807420
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2008000172
Radio Screen Flickering When Using Apple CarPlay Or Android Auto.
S2018000012
Check engine lamp on. Fault code P0244- TURBOCHARGER/SUPERCHARGER WASTEGATE SOLENOID "A" RANGE/PERFORMANCE is set in the Powertrain Control Module (PCM a.k.a. ECM) after the turbocharger assembly has been replaced.
S1908000028 Rev.
(Rev. A) Power Inverter Load Ratings
S1908000102
(Rev. A) Power Inverter Load Ratings
18-103-20
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 1. P0394 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 2. Customers may experience the following:Hard launch and an increase in engine RPM, when shifting from park to drive.(automatic transmission vehicles only). Engine RPM increase at startup and/or between shifts (manual transmission vehicles only).
1810320
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find oneor more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 1. P0394 - Camshaft Position Sensor Intermittent - Bank 2 Sensor 2. Customers may experience the following:Hard launch and an increase in engine RPM, when shifting from park to drive.(automatic transmission vehicles only). Engine RPM increase at startup and/or between shifts(manual transmission vehicles only).
31-002-20
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
3100220
Aluminum Body Panel Corrosion Repair This bulletin involves inspecting and if necessary removing corrosion and refinishingthe suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
08-074-20 REV. C
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
0807420REVC
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, checking sales codes and performing vehicle reconfig, if required.Review and perform all step necessary to complete the Repair Procedure. If any steps are missed this may lead to undesired handling characteristics. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S2008000156
CEL (Check Engine Lamp) On, Intermittent Hard Starting, Rough Idle
9004309
GEAR, Power Steering When installing this gear refer to published service information. The power steering pump software must be updated, and vehicle configuration updated to ensure proper steering feel.
08-098-20
UCQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.
0809820
UCQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.
08-091-20
UAQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.
0809120
UAQ Radio Enhancements This bulletin has been canceled. The software on the Uconnect site will be turned off. Any USB flash drives that has this software on it must be deleted. If the radio is updated with 28.3 software it may cause more issues with the radio and dissatisfy the customer. Enhanced software should be available the first quarter of 2021.
S1908000046 Rev.
Audio Cuts Out In Two Second Intervals On Any Mode Or No Audio On Any Mode
S1908000046RevB
Audio Cuts Out In Two Second Intervals On Any Mode Or No Audio On Any Mode
S1921000007 Rev.
(Revision A) Engine Restarting On Stop/Start Event Without Releasing The Brake Pedal, EVIC Displays Shift To P Then Desired Gear, D on PRNDL Flashing
08-074-20 REV. B
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustained steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
S1821000006 Rev.
(Revision A) Oversized Tire Calibration For Customized Jeep Wrangler, Gladiator, 2019 Ram Heavy Duty DJ, MVP Update Required, MVP Hotline
08-074-20 REV. A
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This Technical Service Bulletin (TSB) repair will NOT correct a sustain steering shake, shimmy or vibration. Video aid has been developed for this issue. Refer to the detailed service procedures available in DealerConnect>Service Library under: Service Info>19 - Steering / Linkage / Damper, Steering /Removal and Installation.
68427
D-20-12 Service Bulletin 08-074-20 - Jeep Wrangler (JL) and Jeep Gladiator (JT) - Improved Steering Feel
S2008000141
Navigation Shows Incorrect Location
08-079-20
UGQ Radio Enhancements This bulletin involves inspecting and if required updating the radio software to:28.3 - 2018 34.21 - 2019 and 2020 Customers may experience one or more of the following:Intermittently, the radio screen will black out after key is turned on.(For 34.21 Only) Navigation screen freezes after a Voice Recognition (VR) command. Warning chime will not turn off. Radiodisplay black, except application bar. Language setting reverting from customer set language to Italian language. Message displayed ?TomTom® live services unavailable?. Frequent pop-ups during startup saying device not connected - Uconnect LIVE. Uconnect Live feature may not function properly. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay®. In addition the following enhancements are included:Bluetooth® improvements. VR improvements. Russian language enhancements.
S2018000010
Malfunction Indicator Lamp (MIL) Illuminated, Diagnostic Trouble Code (DTC) P2C90 - Crankcase Ventilation System - Hose "A" Disconnected or P04FC -Crankcase Ventilation Performance
S2008000136
Passenger Air Bag Disable Lamp On Flashing When PADL Switch Is Connected
08-077-20
Additional Repair Steps After the Steering Gear or Pump was Replaced This bulletin has been canceled. When performing repairs on the steering gear or Electric Hydraulic Power Steering (EHPS) pump, follow published service manual procedures in DealerCONNECT/Service Library.
0807720
Additional Repair Steps After the Steering Gear or Pump was Replaced This bulletin has been canceled. When performing repairs on the steering gear or Electric Hydraulic Power Steering (EHPS) pump, follow published service manual procedures in DealerCONNECT/Service Library.
S2008000130
Radio UConnect GPS Based Trip Computer Missing
S1908000046RevA
(Revision A) Audio Cuts Out In Two Second Intervals On Any Mode Or No Audio On Any Mode
9003637
USB PORT, Media Hub For Android Auto and Apple Carplay issues, do not replace this part. Android Auto and Apple Carplay applications may not operate with the vehicle if an aftermarket cable is being used. Verify the functionality of these applications using an OEM Apple Lightning cable or an OEM provided USB cable for Android phones before performing any additional troubleshooting. For questions regarding Android Auto or Apply Carplay functionality, please contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
08-074-20
Improved Steering Feel This bulletin involves replacing the steering gear and updating the Electric Hydraulic Power Steering (EHPS) software, if required. The customer may describe one or more of the following:Steering wander. Vehicle has a lead/pull to the right or left.The lead/pull will be more noticeable in hot ambient temperatures. Steering feels like it has excess play.This service bulletin repair will NOT correct a sustain steering shake, shimmy or vibration. If this repair is performed on a vehicle with those symptoms, that will cause a dissatisfied customer and a repeat visit to the dealer.
S2008000108
Rear Wiper Will Not Turn On After Recent Hard Top Removal
9003704
Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
S1808000284
Power Mirrors And Door Locks Do Not Function. Blind Spot Alert Temporarily Unavailable Is Displayed On The EVIC
18-018-20 REV. A
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P04FC - Crankcase Ventilation System Performance. P0456 EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. Customers may also describe the following condition:Excessive fan noise when the A/C is on MAX output. Other enhancements included in this update: Electric vacuum pump (EVP) update. Fan noise reduction.
1801820
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P04FC - Crankcase Ventilation System Performance. P0456 EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. Customers may also describe the following condition:Excessive fan noise when the A/C is on MAX output. Other enhancements included in this update: Electric vacuum pump (EVP) update. Fan noise reduction.
S2008000103
No Start, High Current Fuse Array (HCFA) Location And Testing
S2023000036
Front Seat Lift Handle Binding
S2008000093
Blind Spot Or Park Assist Warnings, False Activation
S2008000075
No Start, Start Stop Inoperative, Cluster Messages to Service Shifter or Service Start Stop System
07-001-20 REV. C
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
0700120
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
S2008000091
Cluster Temperature Display Flashes Up 800 Degree Temperature Intermittently Upon Start Up
18-014-20 REV. B
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P2C90 - Crankcase Ventilation System - Hose "A" Disconnected(APAC, EMEA and LATAM Only). P04FC - Crankcase Ventilation System Performance(APAC, EMEA and LATAM Only). P2453 - Particulate Filter Pressure Sensor "A" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF). P245F - Particulate Filter Pressure Sensor "B" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF). P0456 - EVAP System Small Leak. If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). P050B - Cold Start Ignition Timing Performance(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). Customers may comment on one or more of the following:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. Software enhancements also included in this update:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
1801420
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P2C90 - Crankcase Ventilation System - Hose "A" Disconnected(APAC, EMEA and LATAM Only). P04FC - Crankcase Ventilation System Performance(APAC, EMEA and LATAM Only). P2453 - Particulate Filter Pressure Sensor "A" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF). P245F - Particulate Filter Pressure Sensor "B" Circuit Range/Performance(APAC and EMEA only equipped with Gas Particulate Filter (GPF). P0456 - EVAP System Small Leak. If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). P050B - Cold Start Ignition Timing Performance(Sales Codes NA1 with NBQ or NB6 Only - APAC and EMEA Only). Customers may comment on one or more of the following:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. Software enhancements also included in this update:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
S19080000047
Volume Uncontrollable Or Stuck On High
S1908000047
Volume Uncontrollable Or Stuck On High
0806320
Flash: Security Gateway Module (SGW) Enhancements This bulletin involves reprogramming the SGW with the latest available software. The SGW in these vehicles was flashed with a calibration intended to be paired with a different software version.No symptoms will be observable to the customer. Diagnostic services will still work correctly (e.g. vehicle scan, DTC read, etc.). However, the vehicle security firewalls will be lacking.Diagnostic Trouble Codes (DTCs) may be present. The technician will receive no notification indicating there is any problem with the SGW.
S2008000084
Cluster Service 4WD Light On
S2023000032
Hard top quarter window cracked
S1821000006
Oversized Tire Calibration For Customized Jeep Wrangler, Gladiator, 2019 Ram Heavy Duty DJ, MVP Update Required, MVP Hotline
S1908000079
Travellink Fuel Prices Are Incorrect
S1721000016
Service 4wd Light On, Message AWD System Service Required
65710
Safety Recall W12 JL/JT Clutch Update to Dealer Instructions for Parts Ordering
S2008000077
VP2R Radio Clock Not Keeping Time
S2025000005
Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Codes P0407 ? EGR Sensor B Circuit Low, or P0408 ? EGR Sensor B Circuit High Set
S1821000005
Required Updates When Changing Tire Sizes, Installing Mopar Lift Kits With Larger Tires, Manual Transmission Vehicles Setting DTC P08A6
S1909000002
Customer complaint may include an overfilled engine crankcase after an oil change.
07-001-20 REV. B
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
S2008000073
VP4 Panasonic Radio USB Software Update Error Codes And Guidelines For Recovery
S1908000048
Chime Stuck On In The Audio System
S1908000166
Stop Start Inoperative, Auxiliary Battery Low Requires Charging, No Start
S1908000101
Remote Phone App Does Not Communicate With Vehicle Radio
08-052-20
Rear Window Defroster Inoperable This bulletin involves inspecting and possibly repairing the terminal of the rear defroster circuit. Customers may comment on one or more of the following:Rear window defroster is inoperable. Wire(s) hanging from the defroster back glass.
23-015-20
Disinfectant Solution Recommended for COVID-19
S2023000016
Squeak Noise From Rear Seat
S2008000059
Error Code 20 Message On the Radio Screen
S2008000060
Radio Issues With iPhone 11
08-049-20
Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
18-039-20
Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
S2019000002
Hands On Steering Wheel Message In EVIC
07-001-20 REV. A
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
S2024000004
Customer Indicates Vehicle Has Poor Air Flow Through Demister (Side) Dash Vents
9004249
FRAME, Rear Seat Back, And Cushion Assembly For all 2-door vehicles, if rear seat exhibits one of the following conditions, please call FCA redacted Content prior to repair. Rear Seat Does Not Fold Cannot Remove Seat Seat Cables Stretched/Broken Seat Latch Seized Rear Seat release not working If no answer, please leave a message with dealer contact and VIN information. If no response in 15 minutes, proceed with repair.
9004166
DAMPER, Steering Additional service procedure steps before replacing the steering damper: Before istalling the steering damper to the vehicle, it is important to prime the new damper by 5 continuous compression ? extension stroke cycles by hand, each cycle consists of a full compression and a full extension stroke, without stops as fast as possible. Use large screwdrivers inserted in the bushings to aid in purging. This will allow you to stand on the lower screwdriver to hold the damper stationary and pump the rod end easier. Perform purge before installing NOTE: Hand purge to be completed in a vertical position with the base cup sticker end down toward the ground and the rod side facing up.See CSN V41 for detail procedure.
V88
Customer Satisfaction Notification V88 Rear Quarter Windows
S1908000208
Satellite Radio Inoperative Radio Has Code B156B-13.
07-001-20
Water Pump Inlet Tube Fastener Torque This bulletin involves checking the torque on the water pump inlet tube fasteners to possibly eliminate coolant leak at this location. The customer may describe either a coolant leak or the coolant level is low.
V41 Rev. 7
Customer Satisfaction Notification V41 Steering Damper
18-014-20 REV. A
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P0456 - EVAP System Small Leak.If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P0171 - Fuel System 1/1 Lean(LATAM Only). P0172 - Fuel System 1/1 Rich(LATAM Only). P0128 - Thermostat Rationality(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). P050B - Cold Start Ignition Timing Performance(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). Customers may experience:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient emperatures. Software enhancements include:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
S20230000017
Whistle Wind Noise From Windshield Area.
S2003000001
Noise From Front Axle Area Over Bumps
D-20-02 Rev. A
DIPAP Requirements - Addition of Jeep Wrangler (JL/JK) and Jeep Gladiator (JT) Hard Top and Targa Top Panel Replacements - All Dealers (Rev. A)
S2008000016
4WD Lamp On, Service 4WD System, DTC C147B-14 Front Axle Disconnect Sensor-Circuit Short To Ground Or Open
18-018-20
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC):P0456 EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. Customers may also describe the following condition:Excessive fan noise when the A/C is on MAX output. Other enhancements included in this update:Electric vacuum pump (EVP) update. Fan noise reduction.
9004002
SWITCH, Power Window For concern of rear windows INOP from the rear window switch, please contact FCA Redacted Content before replacing the part. If no response in 15 minutes, proceed with repair.
9004190
FRAME, Front Seat Cushion For all 2 door JL vehicles, if the front driver or passenger seat is stuck in the folded (EZ entry) position or it won't return to normal seating position, review SB 23-020-19 prior to replacing the seat frame.
S2008000013
Key Programming, Security Pin Request, Pin Invalid
S1805000006
ESC Light Illuminated. DTC C1252-92 VACUUM PUMP CONTROL CIRCUIT And Or P258B ELECTRONIC VACUUM PUMP PERFORMANCE
S2023000012
Wind Whistle Noise From Glove Box Area Above 35 MPH
S2008000012
Rear Park Assist Warning Chime, Rear Park Sense Unavailable Wipe Sensor Message While Backing Up No Object Present
18-014-20
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P0456 - EVAP System Small Leak.If DTC P0456 is present use wiTECH Small Leak Verification Test (SLVT)to determine if a leak is present in the system. P0128 - Thermostat Rationality(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). P050B - Cold Start Ignition Timing Performance(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). Customers may experience:Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. Software enhancements include:Electric Vacuum Pump (EVP) update. Fan noise reduction. Low Speed Pre Ignition (LSPI) update.
23-011-20
Rubicon Front Seat Back Panel Loose This bulletin includes inspecting, reattaching and if needed replacing the front seat back panel(s). Customers may comment on the following:Front seat back panel is loose. Front seat back panel fell off. Gap between the seat back and seat assembly,Fig. 1. Gap Between Seat Back and Panel
D-20-02
DIPAP Requirements - Addition of Jeep Wrangler (JL/JK) and Jeep Gladiator (JT) Hard Top and Targa Top Panel Replacements - All Dealers
S2023000009
Noise From Passenger Front Seat Area
08-013-20
Body Control Module (BCM) Reconfigure for Enabling the Auto-On Comfort Settings This bulletin involves reconfiguring the BCM and possibly a radio reset, to enable the auto-on comfort settings. Customers may comment on one or more of the following:If below 4 °C (40 °F), the heated seats or heated steering wheel turn on by themselves. If above 26 °C (80 °F), the vented seats turn on by themselves. Cannot turn off the auto-on comfort feature. With the symptom/condition listed above, there?s no setting in the radio to turn the auto-on comfort feature off.
08-128-19
UJQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to:22.5 Without Digital Audio Broadcasting (Sales Code RS9). 21.10 With RS9. Customers may experience one or more of the following: Arabic language is missing (Without RS9). Navigation inoperable (Without RS9). Bottom menu bar of the radio is non responsive or frozen (Without RS9). After viewing the weather map following a flood advisory popup, the main soft key's at the bottom of the screen may not respond when pressed (Without RS9). Radio will not turn off (Without RS9). Poor AM/FM Reception (Without RS9). Uconnect Live feature may not function properly (EMEA only). Radio may reset, turn off and then back on. Radio display screen freezes. Can freeze in any mode: navigation, audio or backup camera. Audio distortion heard during phone calls and CarPlay®. Rear View Camera (RVC) display screen turns blue or green.
9004194
Latch, Quarter Window, Power Sliding Roof Prior to ordering this part for customers that complain about a buzz, squeak, or rattle, please reference the repair information in the service library. Latch rattles can be repaired by applying UHMW tape to the receiver.
9004022
Air Suspension Components Star Parts Catalog has been updated to show individual service parts for the compressor assembly. This will allow service technicians to repair the root cause without over repairing the system. Replace only the part deemed failed by the diagnostics performed. Individual parts include: - Compressor - Valve block - Individual hoses - Temp sensor - Shield - Air line clips NOTE: in most situations when a new compressor is needed, the compressor as a separate part is the correct repair, and the assembly would not be required.
08-122-19
Additional Repair Steps After the Steering Gear or Pump was Replaced This bulletin will help to determine if additional repair steps are needed for the steering gear or Electric Hydraulic Power Steering (EHPS) pump replacement.If the EHPS software is updated and the sales code is added without steering gear replacement, this will cause undesirable steering feel. A customer or technician has replaced the steering gear or EHPS pump, for any reason.
08-120-19
UGQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.31. Customers may experience one or more of the following: Navigation screen freezes after a Voice Recognition (VR) command. Warning chime will not turn off. Radio display black, except application bar. Language setting reverting from customer set language to Italian language. Message displayed ?TomTom® live services unavailable?. Frequent pop-ups during startup saying device not connected - Uconnect LIVE. Uconnect Live feature may not function properly. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay®. In addition the following enhancements are included:Bluetooth® improvements. VR improvements. Russian language enhancements.
18-034-19 REV. A
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following DTCs:P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. P0456 - EVAP System Small Leak. Customers may also describe the following condition:Excessive fan noise when the A/C is on MAX output. Other enhancements included in this update:Electric vacuum pump (EVP) update. Fan noise reduction.
9004171
COVER, Cylinder Head, Left/Right Prior to replacing the cylinder head cover on ANY 3.6L Pentastar Upgrade Engine, verify that there are no steel dowel pins pressed into the cylinder head. If dowels are present in the cylinder head please remove carefully without touching/damaging the cylinder head sealing surface.
9004066
WIRING KIT, Enclosure (Mopar JL hard top conversion accessory kit) The HVAC control panel requires replacement when GTP sales code is present to restore rear defrost function. The switch is not provided in this kit and a service replacement part must be ordered. See service information procedure for switch replacement and below chart for replacement part numbers. vehicle has GTP+BNH+HAA replace HVAC control with pn 6BE36TRMAC vehicle has GTP+BNH-HAA replace HVAC control with pn 6BE37TRMAC vehicle has GTP+HAA-BNH replace HVAC control with pn 6BE40TRMAC vehicle has GTP-HAA-BNH replace HVAC control with pn 6BE41TRMAC Please ensure that the proper color code is used in place of the part TRM designation. For any questions call John Altsman at (248) 512-9361.
08-001-19 REV. B
UAQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3. Customers may experience one or more of the following:Application bar displays but the screen is black. Continuous chimes from the radio. Voice Recognition (VR) not recognizing voice. Bluetooth connection issues. Navigation screen freezes after a VR command. Intermittent operation of the remote services after vehicle has been turned off for 30 minutes or more. Off road App is missing. Rear View Camera (RVC) display screen turns blue or green. Audio quality Improvement in hands-free calling using Car Play, Android Auto or Bluetooth. Radio will continuously reset with the Jeep splash screen. Radio intermittently resetting or not booting up. Intermittent operation of the vehicle finder app. App icons at the bottom of the display freezes, touch screen will not respond. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay. In addition, the following enhancements are also included in this update:Bluetooth improvements. VR improvements.
0800119
UAQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3. Customers may experience one or more of the following:Application bar displays but the screen is black. Continuous chimes from the radio. Voice Recognition (VR) not recognizing voice. Bluetooth connection issues. Navigation screen freezes after a VR command. Intermittent operation of the remote services after vehicle has been turned off for 30 minutes or more. Off road App is missing. Rear View Camera (RVC) display screen turns blue or green. Audio quality Improvement in hands-free calling using Car Play, Android Auto or Bluetooth. Radio will continuously reset with the Jeep splash screen. Radio intermittently resetting or not booting up. Intermittent operation of the vehicle finder app. App icons at the bottom of the display freezes, touch screen will not respond. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay. In addition, the following enhancements are also included in this update:Bluetooth improvements. VR improvements.
V41
Revised Customer Satisfaction Notification V41 Steering Damper
V41 REV6
Revised Customer Satisfaction Notification V41 Steering Damper
19-002-19
Shimmy In The Steering Wheel After Hitting An Irregularity On The Road Surface This bulletin involves discussing an available video instructing the technicians on how to properly diagnosis and repair this issue.
1900219
Shimmy In The Steering Wheel After Hitting An Irregularity On The Road Surface This bulletin involves discussing an available video instructing the technicians on how to properly diagnosis and repair this issue.
31-004-19
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
31-005-19
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100319
Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
3100419
Authentic Mopar® Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar® Glass.
3100519
Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
3100619
Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
D-19-24
DIPAP Requirements - Addition of Wrangler (JL) Rear Flipper Glass Replacement - All Dealers
D1924
DIPAP Requirements - Addition of Wrangler (JL) Rear Flipper Glass Replacement - All Dealers
18-092-19
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find one or more of the following Diagnostic Trouble Codes (DTCs):P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. Customers may experience one or more of the following:Excessive blower fan noise when the A/C is on MAX output. Intermittentrough idle or idle surging, when coming to a stop(Automatic transmission equipped vehicles only). Random Electronic Stability Control (ESC) lamp illuminates in the InstrumentPanel Cluster (IPC). Driving at vehicle speeds while in first gear and shifting into neutral, amessage "Shift to 1st gear not allowed" message appears in the Electronic Vehicle Information Center (EVIC) when conditions are not met(Manual transmission equipped vehicles only). 3 km (2 mph) difference between cruise set speed versus actual displayspeed. During cold vehicle operation and the use of cruise control on vehicles equipped with an automatic transmission, the engine RPMs may dropbelow idle speed while cruise control is engaged, this may occur if the customer presses the accelerator pedal to achieve a vehicle speedgreater than the cruise control speed and then releasing it. Radio or IPC may reboot (flash off/flash on) during an Engine Stop Start(ESS) shutdown in cold conditions with a battery temperature below -12°C (10°F).
1809219
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find one or more of the following Diagnostic Trouble Codes (DTCs):P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. Customers may experience one or more of the following:Excessive blower fan noise when the A/C is on MAX output. Intermittentrough idle or idle surging, when coming to a stop(Automatic transmission equipped vehicles only). Random Electronic Stability Control (ESC) lamp illuminates in the InstrumentPanel Cluster (IPC). Driving at vehicle speeds while in first gear and shifting into neutral, amessage "Shift to 1st gear not allowed" message appears in the Electronic Vehicle Information Center (EVIC) when conditions are not met(Manual transmission equipped vehicles only). 3 km (2 mph) difference between cruise set speed versus actual displayspeed. During cold vehicle operation and the use of cruise control on vehicles equipped with an automatic transmission, the engine RPMs may dropbelow idle speed while cruise control is engaged, this may occur if the customer presses the accelerator pedal to achieve a vehicle speedgreater than the cruise control speed and then releasing it. Radio or IPC may reboot (flash off/flash on) during an Engine Stop Start(ESS) shutdown in cold conditions with a battery temperature below -12°C (10°F).
18-089-19
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
1808919
wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
V41 REV4
Revised Customer Satisfaction Notification V41 ? Steering Damper
08-001-19 REV. A
UAQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3. Customers may experience one or more of the following:Radio will continuous reset with the Jeep splash screen. App icons at the bottom of the display freezes, touch screen will not respond. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay®. Rear View Camera (RVC) display screen turns blue or green. Off Road App is missing. In addition, the following enhancements are included in this update:Bluetooth® improvements. Voice Recognition (VR) improvements.
08-002-19 REV. A
UCQ Radio Enhancements This bulletin involves inspecting and if required, updating the radio software level to 28.3. Customers may experience one or more of the following:Radio will continuous reset with the Jeep splash screen. App icons at the bottom of the display freezes, touch screen will not respond. Radio may reset, turn off and then back on. Audio distortion heard during phone calls and CarPlay®. Rear View Camera (RVC) display screen turns blue or green. Off Road App is missing. In addition, the following enhancements are included in this update:Bluetooth® improvements. Voice Recognition (VR) improvements.
9004142
DOOR, Assembly (Front or Rear) For concern of flag nut not aligned to hole, use a blunt tool and lightly tap on the flag nut to knock it loose from e-coat that has dried it in place.
9004116
HANDLE AND CABLE, Seat Release If you have a 2 door JL with EZ entry handle that is loose or appears broken follow the procedure below. Mounting bracket has grease present which may have damaged plastic part. Please call Adam Rose (586) 804-4315) for cleaning procedure prior to replacing any parts. If no response in 15 minutes, proceed with repair after thoroughly cleaning grease off metal mounting bracket as follows. Clean metal mounting bracket with brake cleaner sprayed onto shop rag, rub on mounting surface until grease is removed. Do not spray brake cleaner directly onto seat. Replacement plastic part may fail in same way if grease is not removed.
9004129
FRAME, Front Seat Back For JL and JT vehicles with concern of front seat back appears loose at inboard (closest to center console) side hinge, please call Ajay Sharma at (646) 236-2413 prior to any repairs. If no response in 15 mins,proceed with repairs.
04-001-19
Pentastar Upgrade Oil Fill Level after an Oil Change This bulletin involves rechecking the oil fill level after filling the engine to the correct specifications. The customer may describe that after an oil change they check their oil fill level and it is showing overfilled on the oil dipstick.
08-084-19
Radio and Back-up Camera Enhancements This bulletin involves updating the radio software level to 1848.24. Customers may experience one or more of the following: Green horizontal lines on back up display, in reverse (If this is the customer concern use camera LOP 18-60-02-Y7, on JL vehicles only). Ghost Touch, features, modes and App?s changing, without drivers input. Speaker pop noise when using Bluetooth device. When vehicle is first started the radio will reset and the time display shows 12:00. Audio distortion and volume fluctuation. Blank rear camera image in reverse (If this is the customer concern use camera LOP 18-60-02-Y7) JL only. Audio cutting in and out during memory recall. Ring tone too loud. AM/FM volume fluctuates. While in CarPlay® or AndroidAuto® Google® maps showing wrong location. Phone disconnected after first call. Black screen or White screen with vertical lines. PIN clear and volume locked while KeySense is used. Audio static while in SXM/SAT modes. Echo heard during Bluetooth phone calls. The radio is locked up. The radio remains on after ignition has been turned off. The radio resets. The radio screen turns black. The radio screen shows messages ?Software Update? or ?Reinsert USB Device? and displays that screen in a continuous loop.
9003220
RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
9004112
Idle Related Components For concern of P0507 diagnostic trouble code, please verify the powertrain control module is at the latest software level prior to replacing any components related to P0507 diagnostics.
G-07.18.2019
2018+ JL BATTERY DISCONNECT FOR BOTH BATTERIES
9004071
SWITCH, Neutral Safety If you are working on a Manual Transmission and are considering replacing the Neutral Safety Switch for an Auto Start/Stop Issue, Prior to order/replace please first check operation of the SENSOR; Clutch Pedal and SWITCH, Clutch Starter Interlock. If you have any question, contact Jeff Laduke at (810) 422-3099. If no response in 15 minutes, proceed with repair.
9004084
ARMREST, Console If you are replacing a center console armrest for a latch issue, please note that the latch and latch cover are serviceable components. Please only replace the following part numbers for this issue: Latch: 68470797A$ Cover: 68470798A$ Failure to follow this could result in a chargeback
9004085
SENSOR, Clutch Pedal Engineering is seeking information regarding P083F - Clutch Pedal Sensor A B Correlation Faults. Prior to component(s) replacement: Please Contact the following individuals: Joe Marigold (248) 701-8510 / joe.marigold@fcagroup.com Michael Lai (734) 286-0321 / michael.lai@fcagroup.com If no response in 15 minutes, proceed with repair
09-002-19 REV A
Diesel Low Pressure Exhaust Gas Recirculation (EGR) Valve Cleaning This bulletin involves cleaning the diesel low pressure EGR valve. Vehicles may display a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following Diagnostic Trouble Code (DTC) has been set:P045E - EGR -B- Control Stuck Open.
18-006-19 REV B
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:P249E-00 - Closed Loop Reductant Injection Control At Limit - Flow Too High. P045E-00 - EGR -B- Control Stuck Open. P208B - Reductant Pump 1 Control Performance. In addition customers may experience the following:Engine auto-stops during a shift of transfer case into neutral. Reduced oil change intervals. Speed Limiter distance unit type changes from MPH to KPH after key-off. Speed Limiter not enabled following a quick key-off/on sequence. Cruise control set-speed not displayed by cluster until minimum set speed achieved. Increased fan noise. Reduced durability of electric vacuum pumps under heavy stop/go driving conditions. Driveability complaints during an on-road DPF regeneration routine. Previous software releases requested the display of message "Particulate Filter Almost Full Keep The Vehicle Running" and will now request the message "Particulate Filter 100% Full Maintenance Required Contact Assistance". No auto-start after release of brake pedal.
08-048-19
Splash Screen Displays Incorrect Logo In The Electronic Vehicle Information Center (EVIC) This bulletin involves a vehicle reconfiguration for proper operation of the Instrument Cluster display. The customer may notice the splash screen is incorrectly displaying a Sahara logo in the EVIC when the vehicle is first started and it should be displaying the Overland logo.
18-041-19
Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following DTCs have been set: P0456 - EVAP System Small Leak(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). P0128 - Thermostat Rationality(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). P050B - Cold Start Ignition Timing Performance(APAC&EMEA with Sales Codes NA1 with NBQ or NB6 Only). Customers may experience: Excessive fan noise when the A/C is on MAX output. Rough idle at engine start up in colder ambient temperatures. Software enhancements include:Electric vacuum pump (EVP) update. Fan noise reduction. Low speed pre ignition (LSPI) update.
Lever 3000 Load
Common portion of a presentation provided to mutiple OEM customers concerning a potential issue and investigation involving a seat adjustment recliner mechanism.
9003293
A/C Pressure Transducer A/C inoperative and diagnosis leads to pressure transducer. Call Steve Rice at cell (248) 867-0061 before replacing the pressure transducer. If no response in 15 minutes, please proceed with repair.
D-17-21
Radio Pre-Authorization Program - Select 7.0/8.4/8.4N Radios (New and Exchange) - 2018 Model Year Vehicles
9003109
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform this inspection: Check if float sensor is rotated off location from the bottle anti-rotation features that surround the SENSOR. Check to determine if the issue has been resolved. Continue with repair if necessary. Please contact Chris Koch at cell (248) 248-622-6417 if you have questions or need additional information.
9003696
Door Hinge Assembly Side door hinge noisy. Only replace the door hinge with the integral check device. Do not replace the simple hinge if it is not damaged it is not the source of the noise. Replacing it unnecessary and is an over-repair.
05152029
Washer Fluid Level Sensor Prior to replacing this part due to "Low Washer Fluid" tell tale light on the dash and the washer fluid bottle is full, please perform the this inspection. Inspect the sensor for a fluid coating on the sensor pins. Orange colored rain repellant can cause this fluid build-up. Clean the pins, drain the reservoir, and fill with Mopar approved washer fluid. Check to determine if the issue has been resolved. Continue with repair if necessary. Also, please inform the customer not to use Rain-X in the system to avoid this issue. Please contact Chuck Hood at cell (248) 613-7591 if you have questions or need additional information. Thank you.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.