SC-20-90-03
Service Bulletin/Repair Instructions
washer bottle repair procedure for cracked reservoirs.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SC-20-90-03
washer bottle repair procedure for cracked reservoirs.
SC-19-01-04
This is a VIN decoder for dealership service use, regarding Karma Automotive built vehicles.
TB-19-90-01
A Bulletin describing a modification to the key fob battery tray to ensure best contact and function.
SC-18-90-01
Update to Key Fob functions description and testing procedures for trouble shooting.
SC-19-30-01
Notes to inform service centers on remote cabin preconditioning operation. This is to better explain it to current owners.
TB-19-82-01
VIN glare remedy instructions to add a foam blocker in the dash to block a glare from the VIN panel visible inside the cabin
CC-18-00-05
CC-18-00-05 Baseline 1062 release 12.21.18
C1810ASD0001
C1810ASD0001-PDI KARMA REVERO Ver.16 - updated to capture some more information
SC-17-01-05
Update to the parts decoder bulletin to introduce the caliper colors available
TB-17-01-04
TB-17-01-04 Pre-Delivery Inspection Bulletin 12.13.18
SC-18-01-05
Serivce interval reminder and fluid and capacities specs
TB-18-12-05
Downstream O2 sensor inspeciton 11.20.18
CC-18-30-03
Revision to the temperature fan wriring inspeciton, added a colored chart and numbers to a graphic on page 7
SC-18-05-02
Password recovery procedure for the service workshop tool "KarmaSync"
CC-18-00-04
BL1061 update, for all vehicles - software updates for some new features
TB-18-30-02
AC pressure switch inspection
P017-01
Covered maintenance policy update
SC-18-01-04
Storage and post storage of sales vehicles inspection and care.
SC-17-05-30
This revision updates the latest firmware version available DA1-26-20.
TB-18-90-02
TB-18-90-02 Body harness splice location inspeciton
CC-18-00-03
CC-18-00-03 Baseline 1050 Firmware release 6.4.18
C1810ASD001
PDI Checklist KARMA REVERO Ver.9, revised checklist for predelivery inspection
TB-18-20-03
TB-18-20-03 Overmold clamp inspection, inspect for possible missing clamps on a hose assembly- installl new ones if needed.
TB-18-12-02
exhuats adjusment, in rattle complaint this is a method to check and adjust the exhaust syetm as needed.
SA-18-01-01
Long term storage guidelines for vehicles at the dealer
01.01.16.0001.03
TSS Svc Tip 01.01.16.0001.03 updated notes on submissions for a Technical Services Support case.
TB-18-94-01
USB port install
SC-18-42-01
Revision to note this information is also applicable to other year vehicles
CC-18-00-02 Revi
Baseline 1040 Firmware release- revised completion procedure and VIN list- less vehicles to be addressed in the field
SC-17-20-08
updated part number, a review of CRFM fan and vibraiton/noise remedy
CC-18-00-02
Baseline 1040 Firmware release
RC-18-84-01
Side Curtain Airbag Recall (takata safety recall campaign)
SC-18-01-03
Repair of Fastener Location
TB-17-76-21
(Revised) notes on window glass adjustment
SC-18-01-02
Campaign Definitions for service center understanding
PB-18-54-01
Dune Twist Wheels Parts Update 2.28.18 - Parts alert of new wheel replaceing the previous versions
SC-18-54-01
Dune Twist Wheels Update 2.28.18- A technical alert of new wheel replaceing the previous versions
CC-17-20-07
PTC heater replacement 2-15-18 (repost for bulletin naming convention correction)
CC-17-86-09
Seat Harness Inspection 2-15-18 (repost for bulletin naming convention correction)
CC-17-90-08
Key Fob Replacements Revised 2-15-18 (repost for bulletin naming convention correction)
TB-17-12-19
Intercooler Hose Clamp Inspection Revised 2-15-18 (repost for bulletin naming convention correction )
TB-17-60-22
C0196 Active After Transport Revised 2-15-18 (repost for bulletin naming convention correction )
TB-17-78-13
Passenger Wiper Arm Replacement revised 2-15-18 (repost for bulletin naming convention correction )
TB-17-82-10
Interior rear view mirror remedy Revised 2-15-18 (repost for bulletin naming convention correction )
TB-17-82-18
Door Blister Remedy Revised 2-15-18 (repost for bulletin naming convention correction )
TB-17-82-26
Door Impressions Remedy Revised 2-15-18 (repost for bulletin naming convention correction )
TB-18-86-01
Seat Squeak Remedy revised 2-16-2018 (repost for bulletin naming convention correction )
CC-18-30-01
AC line inspection , check the AC line for clearnace and slide on a nylon sheath to avoid the condition
TB-18-44-01
Column bolt torque inspection
TB-18-50-01
Brake squeak remedy, should this complaint arise.
CC-17-90-12
Pilot Proximity Cable Harness overlay - added a note for checking the website for new bulletins
CC-17-90-13
Inline Connectors Install Revised - added a note for checking the website for new bulletins
CC-17-94-24
Amplifier replacement revised - added a note for checking the website for new bulletins
CC-18-00-01
Baseline 1035 Firmware Revised 2-5-18
CC-18-12-01
CC-18-12-01 Oil Change Campaign - some vehicle may show false misfires, change the oil on these first.
CC-18-12-01 REVI
CC-18-12-01 Oil Change Campaign - some vehicle may show false misfires, change the oil on these first revision
CC-17-00-29
Baseline 1030 Firmware Release revised 2.1.18
CC-17-20-14
Heater Hose Control Valve Install revised 2-1-18
SC-17-90-04
Update to the 12Volt reset procedure for the vehicle.
SC-18-05-01
revised tool list- update from the previous 2017 publication old list is obsolete
3.90.16.0043.05
MY12 revision to the final baseline release, procedure is the same as previously, one module update was eliminated.
TB-18-20-01
Radiator Hose Clamp inspection
SC-18-01-01
EVAP System Inspection
PDI KARMA REVERO
The PreDelivery Inspection Checklist has been reposted, with a revised line item
PDI-Checklist do
The PreDelivery Inspection Checklist has been reposted, with a revised line item
Recovery Guide f
Revised a line item for the PreDelivery inspection to include reporting to technical services group
PB-17-01-02
Service parts exchange program ("Core Parts Service Exchange")
TB-17-78-33
Wheel Liner Reposition
TB-17-82-17
Wheel Liner Reposition
PB-17-70-01
Back Lite Seal Lubricant Application
PO-17-01
Covered Maintenance Claim Procedure REV 12-6-17
TB-17-70-42
Covered Maintenance Bulletin Revision 12-6-17
TB-17-76-34
Door Molding replacement (part supercession, better fit and finish, replace all )
CC-17-60-27
EPB harness overlay (installation procedure) (revised with VIN list)
CC-17-82-15
floor insulator modification BL1030 , to coordinate with new software (revised with VIN list)
PO-17-02
Warranty policy reminder
PO17-02
Warranty policy reminder
SC-17-01-36
Baseline 1030 package information (baseline firmware update package info)
TB-17-12-37
Verify correct installation of center exhaust, as we have found complaints of loud exhaust do to miss fitment
SC-17-90-25
Revised Torque spec, an dupdated images regarding battery testing in the Revero
SC-17-05-32
Release notes to the scan tool used in Revero diagnostics.
SC-17-86-20
Rear Seat Cushion Heater inspeciton, verify it functions and the connectors are secured properly
SC-17-01-12
The Exterior colors and paints formulations are available. Also Paint pen kits for small fixes.
SC-17-01-14
Over the air update Baseline 1022 ("BL1022") has been released and this is the notes on what changes have been implemented
TB-17-00-11
TB-17-00-11 Baseline 1021 August-24-17, , VIN correction
SC-17-01-10
Communication notice about aftermarket modification and recommendations for service
SC-17-90-13
Key Fob Pairing Procedure
SC-17-01-11
Software target reading, information on retrieving software IDs from modules
SC-17-01-04
VIN Decoder Bulletin revised, previous information bulletin broken down to be more concise
SC-17-01-09
label application August Revised
SC-17-05-07
Revised older bulletin to include new special service tools.
C1810ASD5117
HV BATTERY CONSIGNMENT PROGRAM (CANADA)
TB-17-90-13
replacement of passenger wiper arms for the new parts as used in production vehicles-
SC-17-90-06
Use of special tool described, and procedure and labor operation for calibration of Advanced Driver Assist System Camera
PO17-01
This bulletin outlines what is covered under this program and reimbursement claim instructions. Update.
SC-17-01-03
REVISION: Launch Service Reminder: The purpose of this document is to alert Dealers that a Technical Services Support (?TSS?) case must be submitted for every service center visit during the first six (6) months of vehicle operationand the first three (3) scheduled service/maintenance visits for all Karma Revero vehicles (all model years).
Communication Gu
Email from Client services to Dealerships. Guidelines to follow for communications with Karma Automotive clients throughout the service process
WP 17-01
This bulletin explains the process for claiming Pre-Delivery Inspection (PDI) claims using the Karma Retailer Portal
TB-17-42-02
RDM (Transaxle) LSD addidtive: To reduce differential noise while turning, The remedy for this concern is draining and refilling the differential with the appropriate fluid as directed.
TB-17-12-01
Cam Phaser solenoid cleaning: To provide corrective action for MIL illumination pertaining to codes P0017 and P0014, by cleaning the cam phaser solenoid
01-01-16-0001-02
an old (Fisker Automotive and Technology Group) bulletin republished. This is to clarify the process for requesting technical and or parts requests cases and receive techinical assistance for any manner of repair.
00-01-16-0011-03
an old (Fisker Automotive and Technology Group) bulletin republished. created establish a fixed naming convention for some powertrain components.
00.01.16.0011.03
Traction Motor and Inverter Location and Nomenclature
TB-18-20-02
Sensor Harness Routing Inspection- make sure the sensor harness is routed properly around a coolant hose.
TB-17-90-16
Reporisiton of the TPMS module for improved reception to the sensors
TB-70-90-16
Reporisiton of the TPMS module for improved reception to the sensors
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.