Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
KSB-210122
Revision of KSB-210122. It has been determined the units in this KSB population may develop sidewall cracks at both front slideouts. Only units that develop a crack will require this repair, if the sidewall is not cracked, no repair is needed.
KSB-210122 V2
It has been determined the units in this KSB population may develop sidewall cracks at both front slideouts. Only units that develop a crack will require this repair, if the sidewall is not cracked, no repair is needed.
210122
It has been determined the units in this KSB population may develop sidewall cracks at both front slideouts. Only units that develop a crack will require this repair, if the sidewall is not cracked, no repair is needed.
KSB-200305
Attached are the updated repair instructions for KSB-200305. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBâs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not âdo-it-yourselfersâ. Information is not presented as a repair guaranteed to be covered by warranty. Keystoneâs P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. This process describes how to replace a Furrion Antenna head with a Winegard 360 for Over The Air (OTA) channels.
KSB-210218
This is the inspection instructions for KSB-210218, Inspection Process Sidewall Cracks. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBâs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not âdo-it-yourselfersâ. Inspection information is not presented as a repair guaranteed to be covered by warranty. Keystoneâs P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this inspection is covered by warranty. Not every unit requires a repair. This process describes the inspection of sidewall cracks and separation forward of the front slideouts to determine if there is a defect and what repair may need to be performed.
KSB-180328 V2
This is the revised repair instructions for KSB-180328. The information and instructions in a Keystone Service Bulletin (KSB) are intended to inform RV dealership Service Managers/Technicians of situations that may occur with some Recreational vehicles so dealership personnel can perform proper and efficient service. KSBâs are intended to be used by trained RV technicians with the knowledge, tools and equipment to do the job properly and safely, not âdo-it-yourselfersâ. Information is not presented as a repair guaranteed to be covered by warranty. Keystoneâs P & P (Policy & Procedures) must be followed for any requested warranty work. Do not assume this repair is covered by warranty. Not every unit listed requires a repair. Please read through the instructions start to finish before attempting the repair. This process describes the safe and proper procedure to repair any unit which experiences a crack at the bottom corner of a slideout at the gooseneck of a 5th wheel, opening the side wall to repair broken tube welds and add reinforcement. This technical service bulletin explains how to perform the repair. Please note: A sublet will be required for aluminum welding if you do not have that capability.
20-375
This is the repair instructions, dealer letter, and owner letter for advisory 20-375. It has been determined certain Kinro frameless windows were manufactured with a poor adhesive bond between the glass and aluminum frame, and attachments on crank out and egress windows. The remedy is to perform a pull test on the frameless windows at the vent and replace the vent portion if the glue bond fails during the pull test.
20-367
This is the retail letter for advisory 20-367. It has been determined the vehicles in this population have IW60RL water heaters with a recirculation tank that can break if not winterized and exposed to freezing temperatures.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.