Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSB_ELE422
TECHNICAL SERVICE BULLETIN: INFOTAINMENT SYSTEM SOFTWARE UPDATE USING UPDATE.KIA.COM - This bulletin provides information and service procedures for updating the infotainment systems on applicable Kia vehicles using the Kia Navigation Updater available at update.kia.com. The software update may improve system performance, enhance existing features, and apply the latest operating software for supported vehicles (2021-2026MY All Models).
TSB_ELE417
TECHNICAL SERVICE BULLETIN: INFOTAINMENT SOFTWARE UPDATE PROCEDURE - This bulletin provides information on the process for downloading infotainment software updates and preparing USB for installation on applicable Kia vehicles. The software downloads and USB preparation process is similar across all supported platforms; however, in‑vehicle installation procedures vary by head unit type.
PS797
PITSTOP: TECHNICAL OPERATIONS: EXTERNAL DAMAGE TO ULTRASONIC SENSOR: This Pitstop provides information related to Parking Distance Warning (PDW) alerts and repairs involving ultrasonic sensors. The PDW system alerts the driver while parking, by calculating distance based on the difference in signal transmission and reception times between the vehicle (ultrasonic sensor) and an object. The membrane film of the ultrasonic sensor is used for object detention and can be damaged by stone chips or foreign substances while driving. Damage to the cover of the ultrasonic sensor can also lead to damage to the internal circuit. As a result of this external damage, the PDW system may not receive the proper signal from the ultrasonic sensor. In some cases, the system may cause a false alarm, no alert, or phantom warnings by a “Warning Lamp’ to be displayed on the cluster. The ultrasonic sensor membrane film should be always inspected for external damage and if any part replacement should be treated as a general repair, not as a warranty claim repair for this concern. (Please note that this Pitstop only applies to models/trims that are equipped with the ultrasonic sensors.)
TSB_ELE271_R3
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: INVERTER COOLANT/DEBRIS FLUSHING /REPLACEMENT FOR CLUSTER MESSAGE “REFILL INVERTER COOLANT” (SA515) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to flush out the inverter low-conductivity coolant (BSC-1) on certain 2021-2022MY Sorento HEV (MQ4 HEV) vehicles produced from September 2, 2020 through September 29, 2021 and Sorento PHEV (MQ4 PHEV) vehicles produced from June 29, 2021 through October 1, 2021, which may exhibit a “Refill inverter coolant” message displayed on the instrument cluster due to poor flow of coolant/antifreeze inside the low-conductivity coolant pipe. In most cases, the inverter reservoir tank coolant may be filled to normal level and no diagnostic trouble codes (DTC)s are stored due to an increase operation of the electric water pump (EWP) that is 2,800 RPMs or more when checked.
TSB_ ENG256
TECHNICAL SERVICE BULLETIN: CONTINUOUS VARIABLE VALVE DURATION (CVVD) ACTUATOR OIL SEAL REPLACEMENT - This bulletin provides information to replace the Continuous Variable Valve Duration (CVVD) Actuator seal on some 2021-2022MY Sorento P/HEV (MQ4 P/HEV) vehicles produced from September 02, 2020, through February 24, 2022. The affected vehicles may experience a slow oil leak coming from the CVVD actuator oil seal and potentially associated oil smell due to the oil seal material degrading over time.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.