Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
26LF01
Under certain conditions, debris can accumulate inside the fuel cap causing potential fuel vapor leaks that can cause increased evaporative emissions to exceed the regulated limits. This issue will not trigger the M.I.L. (Malfunction Indicator Lamp).
L-SB-0021-25
OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
L-SB-0057-22 Rev2
OBSOLETE NOTICE February 2, 2026: This bulletin is now obsolete. Please see L-SB-0004-26.
L-SB-0004-26
Some 2018 – 2025 model year Lexus vehicles equipped with the Enform™ 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
L-SB-0030-24 Rev2
Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-TT-0326-23 Rev2
Some customers may experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
L-SB-0043-23 Rev1
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
L-TT-0340-25
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
L-TT-0341-25
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
L-SB-0013-24 Rev1
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
L-SB-0017-19 Rev1
Some 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.
L-SB-0040-20 Rev2
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
L-TT-0336-24 Rev1
After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087 - Lost Communication with ECM/PCM "A" Missing Message. Upon investigation, it is found that the engine ECU has been damage and needs to be replaced. In several cases, the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or mounting bracket. To prevent this condition from occurring, it is recommended that the jumper cables be attached as described in the owner’s manual.
L-TT-0336-24
After jump-starting, the vehicle may experience a no-start condition and multiple DTCs including U010087 - Lost Communication with ECM/PCM "A" Missing Message. Upon investigation, it is found that the engine ECU has been damage and needs to be replaced. In several cases, the cause of the ECU damage was improper jump starting. Further investigation found that ECU damage may occur if the negative (ground) cable clamps are attached on or around the engine ECU or mounting bracket.
L-SB-0039-24
Some 2021 – 2024 model year ES 250, ES 300h, ES 350, RX 350, RX 350h, RX 500h, UX 200, and UX 250h vehicles may exhibit a high-pitched noise coming from the front HVAC blower motor while operating the air conditioner or heater. This condition does not affect the operation of the vehicle, however, a heater cover has been developed to help reduce or potentially eliminate the noise.
L-SB-0030-24 Rev1
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0030-24
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0020-24
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
L-SB-0021-24
Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
L-SB-0022-24
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
L-SB-0023-24
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
L-SB-0024-24
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
LSB005523A
TSB: Some 2018 ? 2024 model year Lexus vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
LTT032623
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
LSB000723
TSB: Some 2020 ? 2022 model year vehicles equipped with 17CY+ Panasonic Audio (versions less than 1226) and Navigation (versions less than 1225 or 1245 with 20 Teammate) may exhibit one or more of the following conditions: ?Navigation reset while entering a destination. ?Voice command does not recognize Starbucks. ??Unable to establish audio connection? message, and Alexa is unable to resume after Android AutoTM interruption. ?Soft buttons grayed Out during panoramic view monitor transition. ?HVAC fan speed displayed incorrectly. ?Volume cannot be adjusted with the rear seat remote control. ?Multimedia system reboots when iPhone® is connected via USB. ?Energy flow information is missing on energy monitor screen. ?Clearance sonar indication on backup camera screen is missing. ?Audio from USB devices intermittently works. ?iPhone® ringer continues after answering call. ?Audio titles not displayed. ?Toyota apps screen menu not displayed. Some 2020 ? 2021 model year vehicles equipped with 17CY+ Panasonic Navigation (version less than 1150) and Audio (version less than 1163) may exhibit one or more of the following conditions: ?Poor map screen touch operation. ?Navigation system reset. ?Climate temperature control difficult to operate. ??Waiting for the Beep? message displayed, voice recognition does not start when pressing the push to talk button. ?Blower motor speed incorrectly displayed. ?White CarPlay® screen when connecting iPhone12®. ?Navigation sub-screen blank while playing a CD. ?Inoperative rear seat entertainment track controls. ?Abnormal energy flow screen appearance. ?Incorrect FM or SiriusXM® genre Information. A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to address these conditions.
L-SB-0057-22
TSB: Some 2018 ? 2022 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
L-TT-0321-22
TT: Confirm there is an abnormal noise coming from the front of the vehicle, some customers describe the noise as a roaring type noise. Confirm the vehicle meets the following criteria: ?Mileage is under 5,000 miles ?No previous repairs or accidents ?Noise is due to the left/right/both front hubs and bearings If the vehicle meets the above criteria, please recover the front hubs and bearings and submit a Dealership Product Report (DPR) including a video of the condition. If the vehicle does not exhibit an abnormal noise OR does not meet the above criteria, please proceed to diagnose the vehicle using the applicable repair manual.
22LC02 Dealer Pa
DP: The subject vehicles may have been equipped with an engine containing an incorrectly manufactured Crankcase Case Vent. If the engine is equipped with an incorrectly manufactured Crankcase Case Vent, the vehicle may release crankcase emissions
22LC02 Technical
TI: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 22LC02 Crankcase Case Vent
22LC02 Area Lett
AL: The subject vehicles may have been equipped with an engine containing an incorrectly manufactured Crankcase Case Vent. If the engine is equipped with an incorrectly manufactured Crankcase Case Vent, the vehicle may not comply with certain Federal emissions regulations
L-SB-0031-22
TSB: Some 2019 ? 2022 model year ES 300h and ES 350 vehicles and 2021 ? 2022 model year ES 250 vehicles may exhibit a whistle or wind noise from the rear left quarter window. An updated repair process has been created to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition
LSB003621Rev2
TSB: Some 2020 model year ES 350, ES 300h, UX 200, and UX 250h vehicles may exhibit one or more of the following conditions: ?Diagnostic Trouble Code (DTC) B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Lexus App does not accept the activation code. ?Lexus App is inoperative. ?SOS call center does not receive the vehicle?s location in a timely manner. ?Lexus App shows an error 42 when trying to execute a command. ?Unable to remote start the vehicle with the key fob (if equipped). ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Destination Assist is inoperative. Some 2020 ? 2021 model year ES 350, ES 300h, UX 200, and UX 250h vehicles may exhibit one or more of the following conditions: ?DTC B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Lexus App is inoperative. ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Depleted 12V vehicle battery when in IG-OFF. Some 2020 ? 2021 model year ES 350, ES 300h, UX 200, and UX 250h and 2021 model year ES 250 vehicles may exhibit one or more of the following conditions: ?Depleted 12V vehicle battery when in IG-OFF. ?Unable to reconnect out of network. A DCM reset and firmware update is now available to address these conditions. Follow the DCM Reset and Firmware Update Procedure in this bulletin to update the firmware.
L-SB-0040-20 Rev
TSB: This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger
LTT031622
TT: To improve guest support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
LSB000822Rev1
TSB: Some 2021 ? 2022 model year ES 250, and 2019 ? 2022 model year ES 300h and ES 350 vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated fitting kit is now available as a service part. Follow the Repair Procedures in this bulletin to address this condition
Safety Recall 22
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
L-SB-0036-21 Rev
TSB: Some 2020 model year ES 350, ES 300h, UX 200, and UX 250h vehicles may exhibit one or more of the following conditions: ?Diagnostic Trouble Code (DTC) B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Lexus app does not accept the activation code. ?Lexus app is inoperative. ?SOS call center does not receive the vehicle?s location in a timely manner. ?Lexus app shows an error 42 when trying to execute a command. ?Unable to remote start the vehicle with the key fob (if equipped). ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Destination Assist is inoperative Some 2020 ? 2021 model year ES 350, ES 300h, UX 200, and UX 250h vehicles may exhibit one or more of the following conditions: ?DTC B15A804 is present in current or history. ?Red SOS LED stays on after bulb check. ?Lexus App is inoperative. ?Unable to subscribe to remote services. ?Unable to activate Wi-Fi. ?Depleted 12V vehicle battery when in IG-OFF. Some 2020 ? 2021 model year ES 350, ES 300h, UX 200, and UX 250h and 2021 model year ES 250 vehicles may exhibit one or more of the following conditions: ?Depleted 12V vehicle battery when in IG-OFF. Some 2020 ? 2021 model year ES 350, ES 300h, UX 200, and UX 250h and 2021 model year ES 250 vehicles may exhibit one or more of the following conditions: ?Remote Engine Start inoperative (fob and app). ?Remote Engine Start inoperative (app only). ?B15CC49 backup battery malfunction. ?Power Door Lock inoperative (app and fob). Some 2020 ? 2022 model year ES 350, ES 300h, UX 200, and UX 250h, 2021 ? 2022 model year ES 250 vehicles may exhibit one or more of the following conditions: ?Connected Services inoperative. ?Safety Connect calls not completing intermittently. ?DCM signal strength grayed OUT on head unit with strike through. DCM reset and firmware update is now available to address these conditions.
L-SB-0008-22
TSB: Some 2021 ? 2022 model year ES 250, and 2019 ? 2022 model year ES 300h and ES 350 vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated fitting kit is now available as a service part. Follow the Repair Procedures in this bulletin to address this conditionme 2021 ? 2022 model year ES 250, and 2019 ? 2022 model year ES 300h and ES 350 vehicles may exhibit a brake squeal/squeak noise from the front brake components. For customers who find these characteristics objectionable, an updated fitting kit is now available as a service part. Follow the Repair Procedures in this bulletin to address this condition
LTT029721
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
L-TT-0297-21 Rev
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns
L-SB-0004-22
TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0025-21 Rev
TSB: Some 2020 ? 2022 model year Lexus vehicles equipped with Pioneer Audio (version 1804) or earlier may exhibit one or more of the following conditions: ?Abnormal Bluetooth® Audio Mode transition. ?Difficult radio tune knob operation when selecting audio source. Some 2020 ? 2021 model year Lexus vehicles equipped with Pioneer Audio (version 1799) or earlier may exhibit one or more of the following conditions: ?Album art inoperative. ?Low Volume from CarPlay® FaceTime Audio Calls. ?Pause function intermittently inoperative in CD mode. ?Intermittent Diagnostic Trouble Code (DTC) B15FE present. ?Abnormal energy flow screen appearance on Hybrid models. ?Abnormal phone call operation during Apple CarPlay®. ??No Information? displayed in Information Screen. ?No audio after voice guidance in Android Auto. ?Repeat Function Inoperative in Bluetooth® Audio Mode. ?Audio does not resume after CarPlay® Voicemail. ?Climate temperature control difficult to operate. ?Text message screen Reply button is inoperative using Apple iOS13® or later. Follow the Multimedia Software Update Procedure in this bulletin to install the latest software version
L-TT-0271-19 Rev
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
L-SB-0013-21 Rev
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
L-SB-0017-21 Rev
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
L-SB-0018-21 Rev
TSB: 2022 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
L-SB-0019-21 Rev
TSB: Some 2022 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
L-SB-0014-21 Rev
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
L-SB-0012-21 Rev
TSB: 2022 model year Lexus vehicles are equipped with a factory-installed SiriusXM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the SiriusXM satellite radio is activated and ready for use.
L-TT-0303-21
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
L-SB-0024-21
TSB: Some 2007 ? 2022 model year Lexus vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
L-SB-0022-21
TSB: Hybrid vehicles are equipped with two types of batteries: ?Hybrid Vehicle (HV) battery ?Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary
L-SB-0023-21
TSB: This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650V. These high voltages are dangerous and can cause personal injury, severe burns, electric shock, and death if proper safety precautions are NOT followed. Be sure to carefully review ALL applicable Repair Manual procedures BEFORE performing service. As a policy, and to help ensure safety, no Lexus dealership technician is qualified to service or repair hybrid vehicles until Lexus course L071 is successfully completed.
L-SB-0017-21
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Follow the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
L-SB-0018-21
TSB: 2022 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
L-SB-0019-21
TSB: Some 2022 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
L-SB-0013-21
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery.
L-SB-0014-21
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.