Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
L-SB-0013-26 Rev1
Service Bulletin/Repair Instructions
Some 2024 – 2026 model year GX 550 vehicles may exhibit a vibration at idle when in drive. The Engine Control Module (ECM) logic has been modified, in addition to improved exhaust hangers, to help improve this condition
L-SB-0053-25 Rev2
Service Bulletin/Repair Instructions
Some 2022 – 2026 model year LX 600, 2024 – 2026 model year GX 550, and 2025 – 2026 model year LX 700h vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse
L-SB-0009-25 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE Month ##, 2026: This bulletin is now obsolete. Please see L-SB-0018-26
L-SB-0017-26
Service Bulletin/Repair Instructions
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
L-SB-0018-26
Service Bulletin/Repair Instructions
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
L-SB-0019-25 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE June 18, 2026: This bulletin is now obsolete. Please see L-SB-0017-26.
L-SB-0011-25 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE June 15, 2026: This bulletin is now obsolete. Please see L-SB-0016-26.
L-SB-0016-26
Service Bulletin/Repair Instructions
Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Anyproblems that are found should be corrected immediately.
L-SB-0013-26
Service Bulletin/Repair Instructions
Some 2024 – 2026 model year GX 550 vehicles may exhibit a vibration at idle when in drive. The Engine Control Module (ECM) logic has been modified, in addition to improved exhaust hangers, to help improve this condition.
L-SB-0050-25 Rev1
Service Bulletin/Repair Instructions
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: • Careful inspection for paint chips/scratches and body dents/dings. • Proper operation of electrical accessories (including interior light, clock, and radio reset). • Interior cleanliness. • Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus Warranty Policy. • GTS+ Health Check • Completed PDS Check Sheet • Battery Charge Test Print Out • GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year GX 550 vehicles.
L-SB-0053-25
Service Bulletin/Repair Instructions
Some 2022 – 2026 model year LX 600, 2024 – 2026 model year GX 550, and 2025 – 2026 model year LX 700h vehicles may exhibit a condition where the front brakes produce a squealing noise when driving forward or in reverse.
L-SB-0014-25 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 10, 2026: This bulletin is now obsolete. Please see L-SB-0005-26.
L-SB-0005-26
Service Bulletin/Repair Instructions
The 2026 model year Lexus vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle’s glove box for customer reference.
L-SB-0030-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0050-25
Service Bulletin/Repair Instructions
Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: •Careful inspection for paint chips/scratches and body dents/dings. •Proper operation of electrical accessories (including interior light, clock, and radio reset). •Interior cleanliness. •Proper function of mechanical systems. The PDS process helps identify potential vehicle concerns before customer delivery. After completing the PDS process, maintain accurate PDS records by ensuring the required documents listed below are completed and recorded in accordance with Lexus Warranty Policy. •GTS+ Health Check •Completed PDS Check Sheet •Battery Charge Test Print Out •GTS+ Tire Pressure Information Customer retention and proper maintenance of vehicles are and have always been a major focus for Lexus. To help remind customers that regular service is essential to the proper maintenance of the vehicle, dealers are required to install a service reminder sticker before delivery. By doing this, customers will be reminded to return to your dealership for service. Your current service reminder sticker may be used. This bulletin contains the PDS procedures that apply specifically to 2026 model year GX 550 vehicles. Refer to L-PDSB-CS001-D the universal Check Sheet that contains PDS steps that apply to all 2026 model year Lexus vehicles. To properly perform a complete PDS, you must complete all procedures contained in this TSB as well as the PDS Check Sheet. In addition, if the vehicle is stored for over 30 days, refer to L-SB-0011-25, Long-Term Vehicle Storage Guidelines.
L-SB-0011-25 Rev1
Service Bulletin/Repair Instructions
Long-Term Vehicle Storage Guidelines Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems that are found should be corrected immediately.
L-SB-0019-25 Rev1
Service Bulletin/Repair Instructions
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
L-SB-0009-25 Rev1
Service Bulletin/Repair Instructions
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
L-TT-0326-23 Rev2
Service Bulletin/Repair Instructions
Some customers may experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
L-SB-0019-25
Service Bulletin/Repair Instructions
A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
L-SB-0014-25
Service Bulletin/Repair Instructions
2026 model year Lexus vehicles are equipped with driver side floor mat retainers to secure the floor mat in the correct position. In addition, some models may also utilize retainers for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retainers. If installation instructions are included in the floor mat kit, place the instructions in the vehicle’s glove box for customer reference.
L-SB-0011-25
Service Bulletin/Repair Instructions
Long-term or off-site storage requires special care to maintain vehicle condition. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle’s systems and components. Any problems that are found should be corrected immediately.
L-SB-0009-25
Service Bulletin/Repair Instructions
During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.