Safety Recall 22
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
Safety Recall 22
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Lexus Safety Re
Safety Recall and Service Campaign - Technician Certification Requirements
L-SB-0008-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
L-SB-0179-17 Obs
TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
L-SB-0002-20
TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition.
L-SB-0001-18-Rev
TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
L-SB-0021-14_Obs
TSB: OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete. Please see L-SB-0001-18.
L-SB-0001-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit
L-SB-0048-08 Obs
TSB: Replacement Certification Labels. OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.
L-SB-0179-17
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
L-SB-0113-12_Rev
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
L-SB-0021-14 Rev
TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
L-SB-0025-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0025-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0007-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
L-SB-0041-11 Rev
TSB: OBSOLETE NOTICE-October 16, 2014: This bulletin is now obsolete. Please see L-SB-0082-14.
L-SB-0082-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
LSB008214
Auto matic Transmission Replacement kPrecautions
L-SB-002-01 - OB
TSB: OBSOLETE NOTICE: July 7, 2014: This bulletin is now obsolete.
LSB002514A
Immobilizer and Smart Key Reset
LSB002514B
Immobilizer and Smart Key Reset
LSB002514
Immobilizer and Smart Key Reset.
L-SB-0015-10 Rev
TSB: OBSOLETE NOTICE-June 12, 2014: This bulletin is now obsolete.
L-SB-0021-14
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
LSB002114
Techstream ECU Flash Reprogramming Procedure.
L-TT-0111-13
Lexus vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
L-BO-004-05 Obso
This bulletin is now obsolete. Please see L-SB-0092-13.
L-SB-0092-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
LSB009213B
Windshield Wiper Blade Maintenance and cleaning
L-SB-0143-11 Rev
Beginning in 1998, Lexus introduced side airbags as optional equipment. Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
L-TT-0031-10
Adhesive & sealant cross reference Information
L-TT-0145-13
Spots in Window glass
LTT014513
Spots in Window Glass - vehicle exterior
L-TT-0116-13
Navigation/ Multi Info Display Day Mode Operation
L-SB-0010-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
LSB001013
Brake Pedal Force Gauge SST for Parking Brake Inspection.
Lexus Floor Mat
In the recent Bi-annual Floor Mat reminder letter distributed November, 2012, Lexus indicated that we were developing support materials that will help remind dealership customers and associates of the importance of proper floor mat usage.
L-SB-0066-11 Rev
When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
LSB-0143-11
LEXUS: INFORMATION REGARDING THE SEAT COVER REPLACEMENT, EQUIPPED WITH SIDE AIR BAGS, THE MODIFICATIONS THAT MIGHT NEGATIVELY AFFECT SIDE AIR BAG PERFORMANCE CAN RESULT IN SEVERE INJURIES. *PE
5030B
HEATED OXYGEN SENSOR REPAIR MANUAL CORRECTION. 00245-RM105-4U2. *TT 00245-RM869-U2. *TT 00245-RM869-U2. *TT 00245-RM980-U2. *TT
002457791
REPAIR MANUAL CORRECTION. *SC
4440B
COMBINATION METER REPAIR MANUAL CORRECTION FOR THE 2001 LEXUS IS300. *TT
4445B
BODY ELECTRICAL - TROUBLESHOOTING REPAIR MANUAL CORRECTION FOR THE 2001 LEXUS IS300. 00245-RM779-U2. *TT
00204
HVAC CONTROL PANEL PEELING (HEATER CONTROL HOUSING SUB-ASSEMBLY). *MR
00503
IMPROVEMENT TO IGNITION CYLINDER PERFORMANCE. *TT
00103
CD CHANGER IMPROVEMENTS. *TT
00301R
THROTTLE RESPONSE AND DOWNSHIFT QUALITY IMPROVEMENTS. *TT
00502
ENGINE CONTROL MODULE (ECM) CALIBRATION UPDATE. HARSH 2-3 SHIFT CONDITION DURING ACCELERATION WITH LIGHT THROTTLE INPUT. *TT
01202
SUSPENSION BALL JOINT INSPECTION METHOD. *TT
EL00702
SOME VEHICLES MAY EXHIBIT THE IN-MIRROR COMPASS INOPERATIVE. *TT
LSC1LD
SUBJECT REGARDING 17INCH FACTORY INSTALLED TIRES, 215/45ZR17. *SLC
MN00241
INFORMATION ON THE REPAIR PROCEDURES FOR THE UNDERBODY PANEL.*JB
BO00901
INFORMATION ON PREVENTING PARTICLE BUILDUP AND PRESERVE THE APPEARANCE OF THE SHOULDER BELT ANCHOR.*JB
060801
SUBJECT REGARDING AN AMENDMENT TO LIMITED SERVICE CAMPAIGN (LSC) 1LC - UNDERBODY PANEL. *TT
1LC
LEXUS HAS INITIATED A LIMITED SERVICE CAMPAIGN ON CERTAIN 2001 MODELYEAR VEHICLES TO INSPECT AND, IF NECESSARY, REPLACE THE UNDERBODY PANEL. THE UNDERBODY PANEL MAY WEAR AND ALLOW THE PANEL TO BECOME LOOSE. THE LOOSE PANEL MAY COME INTO CONTACT WITH THE ROAD SURFACE AND MAY PRODUCE A KNOCKING NOISE FROM UNDERNEATH THE VEHICLE. *TT
SS00401
THIS BULLETIN INVOLVES THE CUSTOMIZE FEATURE OF THE ELECTRICAL FUNCTIONS. *JB
SS00301
SUBJECT REGARDING ELECTRONIC CONTROL UNIT FLASH REPROGRAMMING ERROR MESSAGE. *SLC
SS00101
SUBJECT REGARDING ECU FLASH REPROGRAMMING PROCESS. *TT
BO00201
SUBJECT REGARDING CONDENSATION IN HEADLAMP. *SLC
ST010101
SUBJECT REGARDING STEERING WHEELNUT SERVICE SPECIFICATION. *TT
BO00700
THIS BULLETIN ADDRESSES REAR QUARTER WINDOW WIND NOISE ON 2001 MODEL YEAR IS 300 VEHICLES. *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.