L-SB-0057-22 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 2, 2026: This bulletin is now obsolete. Please see L-SB-0004-26.
Vehicle report
2018 LEXUS LS HYBRID
Service bulletins
146 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
L-SB-0004-26
Service Bulletin/Repair Instructions
Some 2018 – 2025 model year Lexus vehicles equipped with the Enform™ 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
L-SB-0030-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-TT-0326-23 Rev2
Service Bulletin/Repair Instructions
Some customers may experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
L-SB-0043-23 Rev1
Service Bulletin/Repair Instructions
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
L-TT-0341-25
Service Bulletin/Repair Instructions
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
L-SB-0013-24 Rev1
Service Bulletin/Repair Instructions
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
L-SB-0017-19 Rev1
Service Bulletin/Repair Instructions
Some 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.
L-SB-0040-20 Rev2
Service Bulletin/Repair Instructions
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
L-SB-0030-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0030-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0020-24
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
L-SB-0021-24
Service Bulletin/Repair Instructions
Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
L-SB-0022-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
L-SB-0023-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
L-SB-0024-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
L-SB-0013-22 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2023 model year LS 500 and LS 500h vehicles may exhibit a knock/clunk noise from the rear of the vehicle when applying the brakes while driving forward and/or in reverse. The noise is most noticeable when coming to a complete stop. Improved rear brake pads are available to correct this condition.
LSB005523A
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2024 model year Lexus vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
23LE01
Service Bulletin/Repair Instructions
DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Lexus?s agreement to provide a Customer Support Program for certain 2013-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20LA01 or Special Service Campaign 21LC01. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
L-SB-0043-20 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE December 08, 2022: This bulletin is now obsolete. Please see L-SB-0057-22
L-SB-0057-22
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
L-SB-0003-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year LS 500 and LS 500h and 2019 ? 2022 model year RX 350 and RX 450h vehicles may exhibit a condition where the rear combination lamp front corner on the right and/or left-hand side expands and contacts the body. This condition may occur in hot and/or sunny conditions and may result in paint chipping on the body panel. Follow the Repair Procedure in this bulletin to address this condition
LSB001322
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2021 model year LS 500 and LS 500h vehicles may exhibit a knock/clunk noise from the rear of the vehicle when applying the brakes while driving forward and/or in reverse. The noise is most noticeable when coming to a complete stop. New countermeasure rear brake pads are available to correct this condition. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0040-20 Rev
Service Bulletin/Repair Instructions
TSB: This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger
LTT031622
Service Bulletin/Repair Instructions
TT: To improve guest support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
Safety Recall 22
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
L-SB-0010-22
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year LS 500 and LS 500h vehicles may exhibit one or more of the following HVAC conditions: ?Uneven temperature or air flow between the vents. ?Little or no air flow from the vent(s). ?Improper MODE control function. Additionally, some vehicles may store one or more of the following HVAC servo Diagnostic Trouble Codes (DTCs): ?B144A ? Air Outlet DEF Damper Control Servo Motor Circuit ?B1441 ? Air Mix Damper Control Servo Motor Circuit (Passenger Side) ?B1442 ? Air Inlet Damper Control Servo Motor Circuit ?B1443 ? Air Outlet Damper Control Servo Motor Circuit ?B1446 ? Air Mix Damper Control Servo Motor Circuit (Driver Side) ?B1448 ? Passenger Side FACE Servo Motor Circuit ?B1453 ? Air Outlet Damper Cool Control Servo Motor Circuit (Driver Side) ?B1454 ? Outlet Damper Cool Control Servo Motor Circuit (Passenger Side) ?B1455 ? Air Outlet Damper FOOT/DEF Control Servo Motor Circuit (Driver Side) ?B1456 ? Air Outlet Damper FOOT/DEF Control Servo Motor Circuit (Passenger Side) ?B1457 ? Driver Side Air Outlet Damper Control Servo Motor Circuit ?B1458 ? Air Outlet Damper Control Servo Motor Circuit (Passenger Side Front A/C Rear Air Flow) ?B148A ? Air Outlet Rear FOOT Damper Control Servo Motor Circuit (Driver Side) ?B148B ? Air Outlet Rear FOOT Damper Control Servo Motor Circuit (Passenger Side) ?B1486 ? Driver Side Air Outlet Damper Control Servo Motor Circuit ?B1487 ? Air Outlet Damper Control Servo Motor Circuit (Passenger Side Front A/C Air Flow)
L-SB-0004-22
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0043-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
L-TT-0271-19 Rev
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
L-TT-0293-20 Rev
Service Bulletin/Repair Instructions
TT: NOTE: This document ONLY applies to 2020 ES & 2020 NX vehicles built before 10/01/2019. (Vehicles built after that date use AT&T WiFi, not Verizon) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi pre-paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the pre-paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi trial.
L-SB-0018-14 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE July 26, 2021: This bulletin is now obsolete. Please see L-SB-0024-21.
L-SB-0024-21
Service Bulletin/Repair Instructions
TSB: Some 2007 ? 2022 model year Lexus vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part.
Lexus PRO21-UFRM
Service Bulletin/Repair Instructions
POL: UPDATES TO THE 2014-2021 LEXUS UNIVERSAL FLAT RATE MANUAL
Lexus Safety Re
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements
L-TT-0281-20 Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
L-TT-0283-20 Rev
Service Bulletin/Repair Instructions
TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle and is only informing the user of the expiration date.
L-SB-0002-19 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2021 model year LC 500, LC 500h, LS 500, and LS 500h vehicles; and some 2021 model year LC 500c vehicles may exhibit a ?spring? noise upon release of the accelerator pedal. Follow the Repair Procedure in this bulletin to address this condition.
20LC02 - RX - Fr
Service Bulletin/Repair Instructions
FAQ: SPECIAL SERVICE CAMPAIGN 20LC02
L-SB-0020-19 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE December 11, 2020: This bulletin is now obsolete. Please see L-SB-0043-20.
L-SB-0043-20
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
L-SB-0040-20
Service Bulletin/Repair Instructions
TSB: This bulletin includes basic procedures for performing an at battery rescue charge on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
L-TT-0294-20
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to blocked/clogged.
L-TT-0293-20
Service Bulletin/Repair Instructions
TT: NOTE: This document ONLY applies to 2020 ES & 2020 NX vehicles built before 10/01/2020. (Vehicles built after that date use AT&T WiFi, not Verizon) Head unit telematics services become inoperative after DCM replacement and activation if the guest has an ACTIVE Verizon Wi-Fi Pre-Paid subscription. Head unit services include Wi-Fi, Destination Assist, Dynamic Navigation, and Dynamic Voice Recognition. Verizon is not able to transfer the Pre-Paid subscription to the new DCM automatically. As a result, the guest is unable to use their head unit telematics services. At this time if the DCM is replaced and activated before confirming the guests Wi-Fi subscription status, this may require Verizon?s IT to perform a manual fix on the customer?s account. To simplify the diagnosis and prevent the unnecessary replacement of parts, please refer to the procedure below. NOTE: This Tech Tip does not apply if the guest is currently under their Wi-Fi Trial.
L-SB-0039-20
Service Bulletin/Repair Instructions
TSB: This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 ? 2021 model year Lexus vehicles.
L-SB-0026-20
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year LS 500 and LS 500h vehicles may exhibit a squawk/knock noise from the engine compartment when depressing and/or releasing the brake pedal at stationary or driving. Follow the Repair Procedure in this bulletin to address this condition.
L-TT-0265-19 Rev
Service Bulletin/Repair Instructions
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker
L-SB-0023-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
L-SB-0014-18 Rev
Service Bulletin/Repair Instructions
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
L-TT-0286-20
Service Bulletin/Repair Instructions
TT: After performing a battery test using the DCA-8000 battery diagnostic charger and the battery health has been considered a ?Good? condition, the DCA will automatically enter a post-test charging mode. In the post-test charging mode, the DCA analyzes the current state of charge of the battery and automatically begins to charge the battery to a fully charged condition, 100% state of charge. The time required to charge the battery to full will vary. Once the DCA enters the post-test charging mode the battery test has been completed, and further charging can be conducted under the Technician?s discretion. Selecting ?Stop? will cancel the automatic charging of the battery and return the user to the DCA results screen. The test results and charge time can be printed or emailed from the results screen.
L-SB-0008-20
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
L-SB-0179-17 Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
L-TT-0254-18
Service Bulletin/Repair Instructions
TT: In certain cases of leaking air conditioning systems, the root cause of the leak is inadvertently overlooked, causing a repeat repair. To improve customer satisfaction and repair A/C system leaks in one dealer visit, Toyota has developed a set of guidelines for evaluating A/C system components.
L-TT-0283-20
Service Bulletin/Repair Instructions
TT: Some vehicles equipped with Dynamic Navigation may experience a pop-up message notifying them that their map update service will end soon. The date that is shown could be more than one year in the future. This does not indicate any issues with the vehicle, and is only informing the user of the expiration date.
L-TT-0281-20
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
L-SB-0003-20
Service Bulletin/Repair Instructions
TSB: Some 2006 ? 2020 model year Lexus vehicles may exhibit odors that naturally occur from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
L-SB-0060-13 Obs
Service Bulletin/Repair Instructions
TSB: February 06, 2020: This bulletin is now obsolete. Please see L-SB-0003-20.
Lexus Version 19
Service Bulletin/Repair Instructions
Dealer Daily Message: In an effort to assist dealers in performing campaign 19LC05 on a customer?s first visit, Lexus is deploying stock of part number 04009-40131 (PIPE KIT, OIL COOLER) to all dealers. Dealers will receive enough parts to repair 2 days-worth of their peak demand based on the quantity of vehicles registered in the dealer?s area. Peak demand has been estimated based on historical campaign demand. Dealers should continue to place orders following the CPOR process for this campaign to replenish their stock. For additional details on the CPOR process, refer to the MAC report. Parts are stocked at the Parts Distribution Centers and are available in two days from order placement.
L-SB-0020-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE December 6, 2019 Rev1: ? Applicability has been updated to include 2018 ? 2020 model year Lexus vehicles. ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 ? 2020 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired or will expire within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
L-TT-0235-17_Rev
Service Bulletin/Repair Instructions
TT: HVAC drain tube is found to blocked/clogged.
L-TT-0271-19
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
L-TT-0221-17_Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
JLH_Clearance Wa
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN JLH INTELLIGENT CLEARANCE SONAR (ICS) SYSTEM REPROGRAM
L-TT-0268-19
Service Bulletin/Repair Instructions
TT: Panasonic exchange Multimedia Extension Unit (MEU) and Display Control Unit (DCU) parts are now being shipped with Apple CarPlay software already installed. If the updated MEU (Navigation) or DCU (Radio) exchange part is installed on a vehicle that has never been updated, a software mismatch can occur, and an error message may be displayed.
L-SB-0060-13_Rev
Service Bulletin/Repair Instructions
TSB: Some 2006 2020 model year Lexus vehicles may exhibit odors that naturally occur from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
L-TT-0265-19
Service Bulletin/Repair Instructions
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ? Circuit demand is too high for GFCI rating ? Worn out GFCI internal contacts ? Improper installation or wiring of GFCI breaker
L-SB-0001-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
L-TT-0263-19
Service Bulletin/Repair Instructions
TT: The new 12V Battery Warranty Testers (DSS-5000 & DCA-8000) require certain information to generate a test result and warranty code. Below is an explanation of what information is required when testing a 12V battery on the new Warranty Battery Testers.
L-SB-0014-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE June 17, 2019 Rev1: ? Applicability has been updated to include 2019 model year ES300h, ES350, LS500, LS500h, UX200, and UX250h and 2020 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded.L-SB-0014-18 Rev1 April 20, 2018 Page 2 of 36 Smart Key Immobilizer Reset and Add/Remove Key © 2019 Lexus, a division of Toyota Motor Sales, USA Required Tools. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system and to add and/or remove a key. NOTICE When performing a Smart Code Reset, ALL registered keys are erased and CANNOT be used again on ANY vehicle. For Undesignated Key Permanent Erasure utility, ONLY the keys that are NOT present will be removed. ANY keys that are NOT present can never be reused.
L-SB-0018-14_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE June 13, 2019 Rev2: ? Applicability has been updated to include 2018 ? 2019 model year Lexus vehicles. March 13, 2017 Rev1: ? Applicability has been updated to include 2015 ? 2017 model year Lexus vehicles. ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2007 ? 2019 model year Lexus vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.
L-SB-0028-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE June 04, 2019 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. The procedure in this Service Bulletin is a full reformat of the multimedia system. Failure to follow the procedure exactly as written may cause damage to the head unit. This reformatting changes the system from a Phase 2 to a Phase 3 system, which includes Apple CarPlay® and Amazon Alexa?. This reformat requires all linked files and folders extracted from the zip file to be placed onto the root directory of the USB flash drive, otherwise damage to the head unit will occur. NOTE ? This procedure is a two-part process that includes an automatic file download from the USB drive once it is inserted into the USB port. Once the headlight flash step is performed the system will begin the installation of the downloaded files. ? Performing this update may change certain head unit operation conditions. For a full list of changes, please see the System Limitations and FAQ. NOTICE Failure to follow the Software Update Procedure exactly as written may cause damage to the head unit.
L-SB-0030-19
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2019 model year RX350 and RX450h vehicles may exhibit a squeak noise from the rear suspension. This condition may be more noticeable in colder ambient temperatures and may occur when traveling over uneven roads or when the vehicle comes to a complete stop. Follow the Repair Procedure in this bulletin to address this condition. APPLICABLE WARRANTY ? This repair is covered under the Lexus Basic Warranty. This warranty is in effect for 48 months or 50,000 miles, whichever occurs first, from the vehicle?s in-service date. ? Warranty application is limited to occurrence of the specified condition described in this bulletin.
L-TT-0261-19
Service Bulletin/Repair Instructions
TT: While performing the retrofit TSB, and creating the USB stick, it is critical that all files that are included in the .zip folder are extracted in the root directory (not in any folders) of the USB drive.
L-SB-0029-19
Service Bulletin/Repair Instructions
TSB: Some 2011 ? 2019 model year Lexus vehicles (including RX350HL, RX450HL, LS460L, and LS600HL) with super chrome wheel finishes may become discolored and/or damaged when aftermarket cleaners, polishes, or brake dust removal products are used on wheels with super chrome finishes. Wheel cleaners and polish that contain acidic substances may damage the clear coat of the wheel, resulting in the undercoating (black) to become visible. See Figures 1 and 2 below for examples of wheel finishes damaged by aftermarket products. NOTE If using a wheel cleaning product, first test it in an area NOT visible to the customer.
L-SB-0028-19
Service Bulletin/Repair Instructions
TSB: Lexus navigation is now available with additional features such as Apple CarPlay® and Amazon Alexa? for applicable 2018 ? 2019 model year Lexus vehicles. Follow the Software Update Procedure in this bulletin to install these new features. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, please see the System Limitations and FAQ. NOTICE Failure to follow the Software Update Procedure exactly as written may cause damage to the head unit.
L-SB-0020-19
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year Lexus vehicles equipped with the Enform? 2.0 Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 9), and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 3). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update. NOTE Map data is released once each year through the shipment of an SST USB flash drive to each dealer. The SST MUST be stored in the SST cabinet to ensure it can be easily found.
JLH-Dealer Packa
Service Bulletin/Repair Instructions
Dealer Packet: April 16, 2019 ? UIO quantities and production ranges have been updated to reflect added vehicles. The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
JLH_Dealer Daily
Service Bulletin/Repair Instructions
Dealer Daily Message: **UPDATED Dealer Letter Available on TIS** Certain 2018 Model Year LS 500 and LS 500h Certain 2018 Model Year NX 300 and NX 300h Certain 2018 Model Year RX 350L and RX 450hL Certain 2017 ? 2018 Model Year RX 350 and RX 450h Intelligent Clearance Sonar (ICS) System Reprogram Special Service Campaign ? UIO quantities and production ranges have been updated to reflect added vehicles.
JLH_Region Email
Service Bulletin/Repair Instructions
Region Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
L-SB-0018-19
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LS500 and LS500h vehicles equipped with air suspension may exhibit an uneven ride height appearance (lean) after parked on an uneven road surface. This condition can be observed when viewed from the rear of the vehicle or while driving from behind. Follow the Repair Procedure in this bulletin to address this condition. NOTE It is recommended to print this Service Bulletin to record the requested measurement data points.
L-SB-0017-19
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2019 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0052-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE March 13, 2019 Rev1: ? Applicability has been updated to include 2018 model year LC500h vehicles. ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded.
L-TT-0218-17-Rev
Service Bulletin/Repair Instructions
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory. 1. First type is generation 6 or 7 which utilizes HDD (Hard Disc Drive). Pioneer models that begin with NXH, have map data, operating system and other information in the Hard Disc Drive. With this system if a radio is being sent back for an exchange. The original Hard Disc Drive needs to be removed and installed into the newly serviced radio.
L-SB-0006-19
Service Bulletin/Repair Instructions
TSB: This bulletin details the supplemental procedure to confirm Telematics Data Communication Module (DCM) activation for applicable 2018 ? 2019 model year Lexus vehicles after the process is initiated by Techstream. The steps outlined in this bulletin include: ? Techstream Messages ? DCM Activation Confirmation ? Vehicle Confirmation
L-SB-0003-19
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year LS500 and LS500h vehicles may exhibit a condition where the rear combination lamp front corner on the right and/or left-hand side expands and contacts the body. This condition may occur in hot and/or sunny conditions and may result in paint chipping on the body panel. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0002-19
Service Bulletin/Repair Instructions
TSB: Some 2018 - 2019 model year LC500, LC500h, LS500, and LS500h vehicles may exhibit a spring noise upon release of the accelerator pedal. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0052-18
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LS500h vehicles may exhibit a shudder/bump feeling during 3rd ? 4th gear shift at approximately 40 ? 60 mph. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0048-18
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year LC500, LC500h, LS500, and LS500h vehicles may exhibit an EPB malfunction warning message with DTC C13A8 (electric parking brake [EPB] actuator) present. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0108-17_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE December 04, 2018: This bulletin is now obsolete. Please see L-SB-0045-18.
L-SB-0045-18
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0108-17. ? Applicability has been updated to include 2019 model year UX200 and UX250h vehicles. Service Bulletin No. L-SB-0108-17 is obsolete and any printed versions should be discarded. A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.
L-TT-0252-18
Service Bulletin/Repair Instructions
TT: When adjusting the Forward Recognition Camera on vehicles with Lexus Safety Sense, it can be difficult to print the repair manual target to the proper size.
L-SB-0043-18
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
L-SB-0044-18
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0112-17. ? Applicability has been updated to include 2019 model year UX200 and UX250h vehicles. Service Bulletin No. L-SB-0112-17 is obsolete and any printed versions should be discarded. Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect vehicle systems and components. Any problems that are found should be corrected immediately.
L-SB-0105-17_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE December 03, 2018: This bulletin is now obsolete. Please see L-SB-0043-18.
L-SB-0112-17_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE December 03, 2018: This bulletin is now obsolete. Please see L-SB-0044-18.
L-SB-0084-15_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE November 30, 2018: This bulletin is no longer applicable and is now obsolete.
L-SB-0102-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 30, 2018 Rev2: ? Applicability has been updated to include 2019 model year UX200 and UX250h vehicles. June 20, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. 2018 ? 2019 model year Lexus vehicles are equipped with factory-installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
L-SB-0103-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 30, 2018 Rev2: ? Applicability has been updated to include 2019 model year UX200 and UX250h vehicles. April 25, 2018 Rev1: ? Applicability has been updated to include 2019 model year vehicles. Any previous printed versions of this bulletin should be discarded. 2018 ? 2019 model year vehicles are equipped with driver side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may also utilize retaining clips for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the appropriate Installation Procedure to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips.
L-SB-0038-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 28, 2018 Rev1: ? The Warranty Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2019 model year RX350 and RX450h vehicles may exhibit a condition where there is a noticeable seat heater temperature difference between the driver and/or passenger seats. Follow the Repair Procedure in this bulletin to address this condition.
L-TT-0242-18_Rev
Service Bulletin/Repair Instructions
TT: In some cases, customers may report the engine coolant temperature gauge on the combination meter intermittently reading max hot, or ?in the red zone,? (Fig.1) on a vehicle with no other symptoms of overheating.
JLH_Dealer Packe
Service Bulletin/Repair Instructions
Dealer Packet: 11/26/2018 ? Owner notification section has been updated. ? CAL ID clarification has been provided in the Op Code section. The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
L-SB-0107-17-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 26, 2018 Rev2: ? Applicability has been updated to include 2019 model year UX250h vehicles. May 10, 2018 Rev1: Applicability has been updated to include 2019 model year vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: Hybrid Vehicle (HV) battery Auxiliary (12V) battery If the vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and auxiliary battery.
L-SB-0013-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 2, 2018 Rev1: ? Applicability has been updated to include 2018 model year LC500h vehicles. Any previous printed versions of this bulletin should be discarded. All 2018 model year LC500 and LC500h vehicles are equipped with high-friction brake pads, specifically designed for superior braking performance and response. As a result, the brakes may exhibit a squeal or squeak noise. For customers who find these characteristics objectionable, brake pads with alternative material are now available as service parts.
JLH-Clearance Wa
Service Bulletin/Repair Instructions
Technical Instructions: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN JLH INTELLIGENT CLEARANCE SONAR (ICS) SYSTEM REPROGRAM
JLH-Dealer Daily
Service Bulletin/Repair Instructions
Dealer Daily Message: Intelligent Clearance Sonar (ICS) System Reprogram. Safety Recall JLH Dealer Letter, Q&A, and Technical Instructions are now available on TIS. Refer to the Dealer Letter and Q&A for additional information.
JLH-Dealer Email
Service Bulletin/Repair Instructions
Dealer Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
L-SB-0039-18
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LS500 vehicles may exhibit one or both of the following transmission-related conditions: ? R to D shift delay when vehicle is cold ? Shift bump when slowing to a stop The Engine Control Module/ECM (SAE Term: Powertrain Control Module/PCM) logic has been revised to address these conditions. Follow the Repair Procedure in this bulletin to address these conditions.
L-SB-0038-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2019 model year RX350 and RX450h vehicles may exhibit a condition where there is a noticeable seat heater temperature difference between the driver and/or passenger seats. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0021-18-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 01, 2018 Rev1: ? The Repair Procedure section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2016 ? 2018 model year RX350 and RX450h vehicles may exhibit a condition where water enters the door lock bezel. This condition may cause the door cable to become frozen and inoperable in freezing conditions. Follow the Repair Procedure in this bulletin to address this condition.
L-TT-250-18
Service Bulletin/Repair Instructions
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
L-TT-0245-18
Service Bulletin/Repair Instructions
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
L-SB-0026-18
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LS500 and LS500h vehicles may exhibit a warning message either under the speedometer (?Engine Oil Level Low Add or Replace?) or on the Navigation screen (?Low Engine Oil?). Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0025-18
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LS500 and LS500h vehicles equipped with air suspension may exhibit an air leak in the shock absorber seal when sitting stationary for long periods of time. This condition may cause a drop in the suspension ride height. Follow the Repair Procedure in this bulletin to address this condition
L-SB-0105-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 3, 2018 Rev2: ? Applicability has been updated to exclude 2018 ? 2019 model year ES300 vehicles. May 16, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
L-SB-0108-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 3, 2018 Rev2: ? Applicability has been updated to exclude 2018 ? 2019 model year ES300 vehicles. May 17, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required to ensure proper operation and optimal battery life. As a matter of policy, Toyota does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle's battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should check battery SOC and recharge, if necessary, within 48 hours of delivery to customers.
L-SB-0112-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 3, 2018 Rev2: ? Applicability has been updated to exclude 2018 ? 2019 model year ES300 vehicles. May 16, 2018 Rev1: ? Applicability has been updated to include 2019 model year Lexus vehicles. Any previous printed versions of this bulletin should be discarded. Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect vehicle systems and components. Any problems that are found should be corrected immediately.
L-SB-0022-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year RX 350 and RX 450h vehicles may exhibit decreased front windshield defroster performance at extremely low ambient temperatures. This condition may be the result of the fresh/recirculation servo actuator separating from the servo, causing the HVAC system to become stuck in recirculation. This condition does not affect the airflow of the defroster. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0021-18
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2018 model year RX 350 and RX 450h vehicles may exhibit a condition where water enters the door lock bezel. This condition may cause the door cable to become frozen and inoperable in freezing conditions. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0107-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE May 10, 2018 Rev1: * Applicability has been updated to include 2019 model year vehicles. Any previous printed versions of this bulletin should be discarded. Hybrid vehicles are equipped with two types of batteries: * Hybrid Vehicle (HV) battery - Auxiliary (12V) battery If the vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary. Perform the following maintenance service for the HV battery and 12V auxiliary battery. NOTE * Before disconnecting the auxiliary battery, confirm the shift lever is in the "P" position and apply the parking brake completely. The shift lever cannot be shifted from the "P" position with the 12V auxiliary battery disconnected. * If the negative (-) terminal of the auxiliary battery is reconnected, even if the power switch is selected to the Start mode, the hybrid system may not start. In this case, push the Power switch to select Start again to start the hybrid system (the Ready light is ON). If the hybrid system still does not start (the Ready light is OFF), refer to the Repair Manual. * If the vehicle is equipped with VGRS, the system must be initialized after the auxiliary battery has been reconnected. Refer to the applicable Service Bulletin for instructions.
L-SB-0084-15_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE May 08, 2018 Rev1: * Applicability has been updated to include 2017 - 2018 model year vehicles. * The Introduction and Download/Installation Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. A download and installation are required to activate the Enform suite of apps and data services before they are used for the first time on new vehicles. The download and installation process may also be performed under other circumstances such as following a head unit replacement or after the customer's personal settings are erased. The download and installation process requires between 3 and 15 minutes to complete, depending on file size, cellular connection speed, and other factors. Following the download and installation procedure, individual Enform apps may periodically update through an over-the-air update system. Follow the procedure in this bulletin to perform the download/installation procedure and app updates.
L-TT-0221-17Rev1
Service Bulletin/Repair Instructions
Diagnosis of bluetooth connectivity complaints.
L-SB-0164-17_Rev
Service Bulletin/Repair Instructions
TSB: To minimize battery discharge during transportation and storage, the D/C cut fuses (30A) have been removed at the assembly plant and temporarily stored in the blank spaces of the engine compartment Relay Block. During Pre-Delivery Service (PDS), reinstall the D/C cut fuses (30A) into their original locations.
L-TT-0223-17_Rev
Service Bulletin/Repair Instructions
TT: Techstream cannot perform a DCM (Telematics ECU) Activation following a DCM replacement. Techstream may exhibit an ?ATX web service unavailable? error or similar message when attempting a DCM activation. This is a known condition and will be remedied in the near future.
L-TT-0218-17_Rev
Service Bulletin/Repair Instructions
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory. 1. First type is generation 6 or 7 which utilizes HDD (Hard Disc Drive). Pioneer models that begin with NXH, have Map Data, Operating System and other Information in the Hard Disc Drive. With this system if a radio is being sent back for an exchange. The original Hard Disc Drive needs to be removed and installed into the newly serviced radio. 2. The Second type is Generation 8 Navigation system which utilizes the Micro SD Card. Pioneer models that begin with NXF, have map data in the Micro SD card. This is a customer accessible Micro SD card which can be found behind the front flip cover. The original Micro SD card should be removed and installed into the newly serviced radio.
L-TT-0234-17_Rev
Service Bulletin/Repair Instructions
TT: Some 2018 model year LC and LS models have been found with a bent front height adjustment sensor bracket. This is causing the headlights to be misaligned when auto adjusting based on the vehicle height position and in some cases, will set a DTC. 2018 model year LS and LC 2wd models share the same front suspension layout leaving the bracket vulnerable to damage if towed incorrectly. Vehicles found shipped by third party tow companies using flatbed trucks are not securing vehicles per the recommendations found in the Owner's Manual. Some methods seen include securing the vehicle with metal hooks around the front lower control arms as a mount point. The height adjustment sensor bracket is fixed to the lower control arm and using this method risks bending the bracket if the strap or chain contacts this bracket under load.
L-SB-0001-18
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit
L-SB-0014-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE January 19, 2018 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather care in Lexus vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care. NOTE Leather seat covers that are replaced for dye transfer or soiling are NOT eligible for replacement under warranty. Likewise, damage caused by unapproved cleaning methods are NOT eligible for replacement under warranty.
L-SB-0182-17
Service Bulletin/Repair Instructions
TSB: Some 2018 model year LC 500 and LC 500h vehicles may exhibit a condition in which a rattle noise occurs near the rear top mount center stop lamp area during operation. This condition is due to the housing and lens separation. Follow the Repair Procedure in this bulletin to address this condition.
L-SB-0179-17
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
L-SB-0113-12_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
L-TT-0234-17
Service Bulletin/Repair Instructions
TT: Some LC models have been found with a bent front height adjustment sensor bracket. This is causing the headlights to be misaligned when auto adjusting based on the vehicle height position and will set a DTC. Vehicles found shipped by third party tow companies using flatbed trucks are not securing vehicles per the recommendations found in the Owner?s Manual. Some methods seen include strapping the vehicle down using the front lower control arms as a mount point. The height adjustment sensor bracket is fixed to the lower control arm and using this method risks bending the bracket if the strap or chain contacts this bracket under load.
L-TT-0233-17
Service Bulletin/Repair Instructions
TT: After the DCM (Data Communication Module) has been replaced, Lexus Enform Remote is unable to remote unlock/lock the doors or remote start the vehicle.
L-SB-0124-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE October 10, 2017 Rev2: ? Applicability has been updated to include 2018 model year LS 500 and LS 500h vehicles. ? The Software Information section has been updated. Some 2018 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software has been installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin.
L-TT-0225-17
Service Bulletin/Repair Instructions
TT: The Repair Manual Specification for Front Camber is incorrect. 0°42' +/- 0°45' (0.70° +/-0.75°), 0.45' (0.75°) Right-left difference. The following are the correct specifications to use: -0°42' +/- 0°25' ( -0.70° +/- 0.41°), 0.30? (0.50°) Right-left difference.
L-SB-0128-17
Service Bulletin/Repair Instructions
TSB: When the DCC fuses are removed or the battery terminal is disconnected, the power source to the power seat ECU is cut off and initialization may be lost. To ensure proper function of the power seats, the seat ECU must be initialized after the DCC fuses have been installed during PDS (Pre-Delivery Service).
L-TT-0222-17
Service Bulletin/Repair Instructions
TT: During previous air conditioning service, leakage prevention agent (A/C stop leak) may have been added to the A/C system. Adding stop leak products to the A/C system is not a recommended or approved Lexus repair process. During A/C service, moisture enters the A/C system, and can react with the previously added A/C stop leak, forming a gelatinous substance. The gel substance that forms can cause the A/C compressor to bind and or seize.
L-TT-0182-15
Service Bulletin/Repair Instructions
TT: Rev1 iPhone text messages do not appear on multimedia display.
L-TT-0221-17
Service Bulletin/Repair Instructions
This bulletin is regarding the Diagnosis of Bluetooth Connectivity Complaints: Some customers may encounter Bluetooth® connectivity concerns such as: Difficulty to pair the phone. Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone or if they have restored their phone data/settings recently.
L-SB-0112-17
Service Bulletin/Repair Instructions
Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect vehicle systems and components. ANY problems that are found should be corrected immediately.
L-SB-0113-17
Service Bulletin/Repair Instructions
TSB: The front wheel opening extension pad set (right and left front wheel opening extension pads and self-tapping screws) is placed in the luggage compartment at the assembly plant to avoid damage in transit.
L-TT-0218-17
Service Bulletin/Repair Instructions
TT: This bulletin is regarding best practices when handling navigation systems that use Hard Disc Drive or Micro SD Card memory.
LSB010817
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life.
LSB010717
Service Bulletin/Repair Instructions
TSB: Hybrid vehicles are equipped with 2 types of batteries: * Hybrid Vehicle (HV) battery * 12-volt auxiliary battery If the vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary.
LSB010517
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Refer to the following procedure to ensure
LSB010317
Service Bulletin/Repair Instructions
TSB: 2018 model year vehicles are equipped with driver?s side floor mat retaining clips to secure the floor mat in the correct position. In addition, some models may utilize retaining clips for passenger side and rear seat floor mats as well. Follow the appropriate Installation Procedure to attach the driver?s side, and if applicable, the passenger?s side and rear seat floor mats to the vehicle carpet using the floor mat retaining clips during Pre-Delivery Service (PDS).
LSB010217
Service Bulletin/Repair Instructions
TSB: 2018 model year Lexus vehicles are equipped with factory installed XM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the XM Satellite Radio is activated and ready for use.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.