Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
L-SB-0037-22 Rev2
Over The Air
Some 2022 – 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definition maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multimedia head unit (version 4.00 or earlier). The updates include the following: • Enhancements to the detection and response of vehicle merging into the preceding lane. • Enhancements to Advance Drive to driver hand-over at lower speeds. • Expanded speed range for system operation. Some 2022 – 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multimedia head unit (earlier than version 5.00). The updates include the following: • Updates the Advanced Drive messages and displays. • Reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask). • Increases scenarios where lane change assist can be used. • Adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes. • Enhances peripheral recognition using LiDARs. • Reduces lane change assist activation when standard construction cones or barrels are detected. • Alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving. • Alerts driver when approaching a much slower vehicle ahead. • Increases the maximum Advanced Drive set speed to 85 mph. Some 2022 – 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multimedia head unit (earlier than version 5.01). The updates include the following: • Adjusts the emergency support brake activation timing. • Adjusts the conditions to warn for merging vehicles at low speed. • Increases scenarios where lane change assistance can be used. The release notes text below will be displayed to the customer: “Adjusts the emergency support brake activation timing. Adjusts the conditions to warn for merging vehicles at low speed. Increases scenarios where lane change assistance can be used.”
L-SB-0057-22 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 2, 2026: This bulletin is now obsolete. Please see L-SB-0004-26.
L-SB-0004-26
Service Bulletin/Repair Instructions
Some 2018 – 2025 model year Lexus vehicles equipped with the Enform™ 2.0 Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
L-SB-0030-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-TT-0326-23 Rev2
Service Bulletin/Repair Instructions
Some customers may experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
L-SB-0043-23 Rev1
Service Bulletin/Repair Instructions
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
L-TT-0341-25
Service Bulletin/Repair Instructions
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
L-SB-0013-24 Rev1
Service Bulletin/Repair Instructions
The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased and can never be reused. Another feature, Add/Remove Key, is also available. Once a key is removed, it can never be reused.
L-SB-0036-22 Rev2
Service Bulletin/Repair Instructions
Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Global Techstream+ (GTS+) ECU flash reprogramming procedures and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard+ (CUW+). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the GTS+ ECU flash reprogramming process.
L-SB-0017-19 Rev1
Service Bulletin/Repair Instructions
Some 2010 – 2026 model year Lexus vehicles may exhibit paint stains after the removal of Rapgard™. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard™. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk.
L-SB-0040-20 Rev2
Service Bulletin/Repair Instructions
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger.
L-SB-0030-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0037-22 Rev1
Over The Air
Some 2022 – 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multimedia head unit (version 4.00 or earlier). The updates include the following: • Enhancements to the detection and response of vehicle merging into the preceding lane. • Enhancements to Advance Drive to driver hand-over at lower speeds. • Expanded speed range for system operation. Some 2022 – 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multimedia head unit (earlier than version 5.00). The updates include the following: • Updates the Advanced Drive messages and displays. • Reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask). • Increases scenarios where lane change assist can be used. • Adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes. • Enhances peripheral recognition using LiDARs. • Reduces lane change assist activation when standard construction cones or barrels are detected. • Alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving. • Alerts driver when approaching a much slower vehicle ahead. • Increases the maximum Advanced Drive set speed to 85 mph. The release notes text below will be displayed to the customer: “Updates the Advanced Drive messages and displays, reduces the frequency of prompts to hold the steering wheel in certain circumstances (e.g., facial recognition impact reduced when wearing a medical mask), increases scenarios where lane change assist can be used, adjusts the speed to help avoid blind spots of other vehicles in adjacent lanes, enhances peripheral recognition using LiDARs, reduces lane change assist activation when standard construction cones or barrels are detected, alerts driver to nearby vehicles at certain highway entrance merging areas during low-speed driving, alerts driver when approaching a much slower vehicle ahead, increases the maximum Advanced Drive set speed to 85 mph.”
L-SB-0030-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0020-24
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
L-SB-0021-24
Service Bulletin/Repair Instructions
Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. •The entire bulletin has been updated.
L-SB-0022-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
L-SB-0023-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
L-SB-0024-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. •The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
L-SB-0013-22 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2023 model year LS 500 and LS 500h vehicles may exhibit a knock/clunk noise from the rear of the vehicle when applying the brakes while driving forward and/or in reverse. The noise is most noticeable when coming to a complete stop. Improved rear brake pads are available to correct this condition.
LSB005523A
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2024 model year Lexus vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
LTT032623
Service Bulletin/Repair Instructions
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features.
L-SB-0037-22
Service Bulletin/Repair Instructions
TSB: Some 2022 ? 2023 model year LS 500h AWD vehicles are equipped with Lexus Advanced Drive. This system provides driving support through automated steering, acceleration, and braking under specific operating conditions within controlled access highways. Lexus Advanced Drive utilizes an array of sensors and cameras, high definitions maps, and the vehicle navigation system to provide hands-free (SAE level: 2) driving assistance for engaged drivers. Updates to enhance Lexus Advanced Drive operation or to add features/functions are delivered to the vehicle directly through the Lexus Enform multi-media head unit. The updates include the following: ?Enhancements to the detection and response of vehicle merging into the preceding lane. ?Enhancements to Advance Drive to driver hand-over at lower speeds. ?Expanded speed range for system operation. Follow the Update Procedure section in this bulletin to complete these updates
L-SB-0035-22
Service Bulletin/Repair Instructions
TSB: When certain vehicle ECUs are replaced, the ECU security key must be written in order for that ECU to communicate on the vehicle network. The Techstream Software Health Check Results screen has been enhanced to help identify if a replacement ECU requires an ECU security key. Follow the procedures in this bulletin to write the ECU security key to the replacement ECU.
L-SB-0036-22
Service Bulletin/Repair Instructions
TSB: Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of TIS and the Calibration Update Wizard (CUW). To ensure the correct ECU software is installed, ECUs will require a Security Signature before the ECU will initialize the flash reprogramming sequence. This bulletin also details the process for acquiring a Security Signature from TIS during the Techstream ECU flash reprogramming process
LTT031622
Service Bulletin/Repair Instructions
TT: To improve guest support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
Service Campaign
Service Bulletin/Repair Instructions
DP: Due to improper programming of the Data Communication Module (DCM), which provides cellular communication in various situations, including emergencies, the driver and Safety Connect operator may not be able to hear each other?s voices during a Safety Connect call
Safety Recall 22
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
LTT029721
Service Bulletin/Repair Instructions
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
L-TT-0297-21 Rev
Service Bulletin/Repair Instructions
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns
L-SB-0004-22
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
L-SB-0044-21
Service Bulletin/Repair Instructions
TSB: This bulletin contains the vehicle specific pre-delivery services for 2022 model year LS 500 and LS 500h vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.
L-TT-0271-19 Rev
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
L-SB-0013-21 Rev
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery. To eliminate customer service concerns due to an undercharged battery during the first few weeks of ownership, ALL dealers should test the auxiliary (12V) battery and recharge, if necessary, no more than 48 hours before delivery to the customer.
L-SB-0017-21 Rev
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation.
L-SB-0018-21 Rev
Service Bulletin/Repair Instructions
TSB: 2022 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
L-SB-0019-21 Rev
Service Bulletin/Repair Instructions
TSB: Some 2022 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
L-SB-0014-21 Rev
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.
L-SB-0012-21 Rev
Service Bulletin/Repair Instructions
TSB: 2022 model year Lexus vehicles are equipped with a factory-installed SiriusXM Satellite Radio, including a 90-day free customer trial. As part of the Pre-Delivery Service (PDS) process, ensure that the SiriusXM satellite radio is activated and ready for use.
L-TT-0303-21
Service Bulletin/Repair Instructions
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
L-SB-0022-21
Service Bulletin/Repair Instructions
TSB: Hybrid vehicles are equipped with two types of batteries: ?Hybrid Vehicle (HV) battery ?Auxiliary (12V) battery If the hybrid vehicle is put into storage, the State-Of-Charge (SOC) of its HV battery and auxiliary battery will gradually decrease. To prevent the auxiliary battery from becoming discharged during storage, proper maintenance is necessary
L-SB-0023-21
Service Bulletin/Repair Instructions
TSB: This bulletin provides general high-voltage safety precautions for the hybrid system. The hybrid system circuits operate with up to 650V. These high voltages are dangerous and can cause personal injury, severe burns, electric shock, and death if proper safety precautions are NOT followed. Be sure to carefully review ALL applicable Repair Manual procedures BEFORE performing service. As a policy, and to help ensure safety, no Lexus dealership technician is qualified to service or repair hybrid vehicles until Lexus course L071 is successfully completed.
L-SB-0017-21
Service Bulletin/Repair Instructions
TSB: During the manufacturing process, tires are mounted on the vehicle as matched sets to help reduce conditions such as pulling or drifting. If the wheels are replaced or refinished before vehicle delivery, it is important that the tires remain on the vehicle in the same location and in the same direction of rotation. Follow the Tire Positioning Procedure in this bulletin to ensure that the original tires stay in the same location on the vehicle.
L-SB-0018-21
Service Bulletin/Repair Instructions
TSB: 2022 model year Lexus vehicles are equipped with driver side floor mat retaining hooks (clips) to secure the floor mat in the correct position. In addition, some models may also utilize retaining hooks (clips) for passenger side and rear seat floor mats. During Pre-Delivery Service (PDS), follow the Installation Procedure in this bulletin to attach the driver side, and if applicable, the passenger side and rear seat floor mats to the vehicle carpet using the floor mat retaining hooks (clips).
L-SB-0019-21
Service Bulletin/Repair Instructions
TSB: Some 2022 model year Lexus vehicles are equipped with an eOwner?s Manual (eOM), which is installed into the head unit while the vehicle is in transit. During Pre-Delivery Service (PDS), follow the instructions contained within the Software Confirmation section of this bulletin to ensure that the software is installed correctly. If it is found that the software is not installed correctly, proceed to the Software Installation section of this bulletin. It may also be necessary to reinstall the eOM software after replacing the head unit. Refer to the Software Confirmation section of this bulletin to determine if the software is already installed. If the software is not installed, proceed to the USB Flash Drive Preparation and Software Installation sections of this bulletin.
L-SB-0013-21
Service Bulletin/Repair Instructions
TSB: A battery in a stored vehicle is subject to conditions that can reduce its performance and service life. These conditions include storage period, temperature, parasitic drain, and battery load. Because of these factors, battery inspection and maintenance are required in order to ensure proper operation and optimal battery life. As a matter of policy, Lexus does not provide battery warranty coverage for discharged and/or failed batteries due to lack of maintenance. It is the dealer?s responsibility to maintain the specified State-Of-Charge (SOC) of the vehicle?s battery while in stock and ensure proper SOC at delivery.
L-SB-0014-21
Service Bulletin/Repair Instructions
TSB: Long-term or off-site storage requires special care to keep vehicles factory fresh and ready for delivery. The following guidelines should be performed to minimize vehicle component/part degradation due to extended vehicle storage conditions. Long-term storage can affect a vehicle?s systems and components. Any problems that are found should be corrected immediately.