Safety Recall 22
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
Safety Recall 22
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Lexus Safety Re
Safety Recall and Service Campaign - Technician Certification Requirements
L-SB-0008-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
L-SB-0179-17 Obs
TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
L-SB-0048-08 Obs
TSB: Replacement Certification Labels. OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.
L-SB-0025-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0066-11 Rev
LSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
L-SB-0025-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0007-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
L-SB-0041-11 Rev
TSB: OBSOLETE NOTICE-October 16, 2014: This bulletin is now obsolete. Please see L-SB-0082-14.
L-SB-0082-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
LSB008214
Auto matic Transmission Replacement kPrecautions
LSB002514A
Immobilizer and Smart Key Reset
LSB002514B
Immobilizer and Smart Key Reset
LSB002514
Immobilizer and Smart Key Reset.
L-TT-0111-13
Lexus vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
L-BO-004-05 Obso
This bulletin is now obsolete. Please see L-SB-0092-13.
L-SB-0092-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
LSB009213B
Windshield Wiper Blade Maintenance and cleaning
L-TT-0031-10
Adhesive & sealant cross reference Information
L-SB-0010-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
LSB001013
Brake Pedal Force Gauge SST for Parking Brake Inspection.
01202
SUSPENSION BALL JOINT INSPECTION METHOD. *TT
BO00501
SUBJECT REGARDING NEW SEAT BELT TONGUE PLATE STOPPER SERVICE PARTS. *TT
AX00101
SUBJECT REGARDING RETRO-FIT INTERNAL TRUNK RELEASE KITS. *TT
ST010101
SUBJECT REGARDING STEERING WHEELNUT SERVICE SPECIFICATION. *TT
BO00200
SUBJECT REGARDING SEAT HEATER REPLACEMENT PROCEDURE. *TT
AU00198
VEHICLE EXPERIENCING STATIC NOISE ON WEAK AM STATIONS. *YC
98201
STARTER SWITCH SPECIAL SERVICE CAMPAIGN . *YC
PG00197
PUBLICATION CORRECTION INFORMATION. *JD
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.