Safety Recall 22
Service Bulletin/Repair Instructions
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
Safety Recall 22
Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
L-SB-0006-22
TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).
Lexus Safety Re
Safety Recall and Service Campaign - Technician Certification Requirements
L-SB-0008-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
L-SB-0179-17 Obs
TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
L-SB-0002-20
TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition.
L-SB-0021-14_Obs
TSB: OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete. Please see L-SB-0001-18.
L-SB-0001-18
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. * Applicability has been updated to include applicable 2018 models and 2016 * 2018 model year RC 300 and 2015 * 2018 model year RC 350 vehicles. * Applicability has been updated to exclude 2001 - 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of TIS and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: * Powertrain Control Module (PCM) * Engine Control Module (ECM) * Transmission Control Module (TCM) * Any other Lexus-specific control unit
L-SB-0048-08 Obs
TSB: Replacement Certification Labels. OBSOLETE NOTICE November 28, 2017: This bulletin is now obsolete. Please see L-SB-0179-17.
L-SB-0021-14 Rev
TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
L-SB-0025-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0066-11 Rev
LSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
L-SB-0025-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
L-SB-0007-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
L-SB-0041-11 Rev
TSB: OBSOLETE NOTICE-October 16, 2014: This bulletin is now obsolete. Please see L-SB-0082-14.
L-SB-0082-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
LSB008214
Auto matic Transmission Replacement kPrecautions
LSB002514A
Immobilizer and Smart Key Reset
LSB002514B
Immobilizer and Smart Key Reset
LSB002514
Immobilizer and Smart Key Reset.
L-SB-0015-10 Rev
TSB: OBSOLETE NOTICE-June 12, 2014: This bulletin is now obsolete.
L-SB-0021-14
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
LSB002114
Techstream ECU Flash Reprogramming Procedure.
L-TT-0111-13
Lexus vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
L-BO-004-05 Obso
This bulletin is now obsolete. Please see L-SB-0092-13.
L-SB-0092-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
LSB009213B
Windshield Wiper Blade Maintenance and cleaning
L-SB-0143-11 Rev
Beginning in 1998, Lexus introduced side airbags as optional equipment. Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
L-TT-0031-10
Adhesive & sealant cross reference Information
L-TT-0145-13
Spots in Window glass
LTT014513
Spots in Window Glass - vehicle exterior
L-TT-0095-12
If a customer states there is an unpleasant odor in the vehicle from the HVAC system, there are various factors that may be involved.
L-TT-0116-13
Navigation/ Multi Info Display Day Mode Operation
L-SB-0010-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
LSB001013
Brake Pedal Force Gauge SST for Parking Brake Inspection.
Lexus Floor Mat
In the recent Bi-annual Floor Mat reminder letter distributed November, 2012, Lexus indicated that we were developing support materials that will help remind dealership customers and associates of the importance of proper floor mat usage.
LTT-0111-13
LEXUS: SOME VEHICLES COME WITH THE SUPPLEMENTAL RESTRAINT SYSTEMS (SRS) AND TO HELP REDUCE INJURIES IN A COLLISION, SEAT BELT PRE-TENSIONERS DEVICES, THAT MAY OR MAY NOT PERFORM AS EXPECTED. MODELS YEARS LISTED 1990-2013. *PE
LSB-0059-12
LEXUS: PRECAUTION INFORMATION ON REMOVAL, INSPECTION, INSTALLATION OF ACCELERATOR PEDAL SENSOR ASSEMBLY, WHICH REQUIRES NO LUBRICATION. MODELS 2001-13 CT200H, ES300, 300H, 330, 350, GS300, 350, 450, 450H, 460, GX460, 470, HS250H, IS F, IS250, 250C, 350, 350C, LFA, LS430, 460, 600H, LX470, 570, RX330, 350, 400H, 450H, SC430. *PE
LSB-0143-11
LEXUS: INFORMATION REGARDING THE SEAT COVER REPLACEMENT, EQUIPPED WITH SIDE AIR BAGS, THE MODIFICATIONS THAT MIGHT NEGATIVELY AFFECT SIDE AIR BAG PERFORMANCE CAN RESULT IN SEVERE INJURIES. *PE
LSB-0015-10
LEXUS: TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. *PE
01206
FUEL TANK DIFFICULT TO FILL. *TT
002458122
REPAIR MANUAL CORRECTION. *SC
00304
ACCESSORY DRIVE BELT NOISE. *TT
4
LIMITED SERVICE CAMPAIGN 4LA INVOLVES REMOVING THE LEXUS LINK SYSTEM PANEL BUTTONS, INSTALLING A SUNGLASSES HOLDER IN THEIR PLACE, AND DISABLING THE LEXUS LINK SYSTEM HARDWARE. *TT
00104
STEERING COLUMN NOISE. (2004 LEXUS LS430) *JB
00103
FRONT BRAKE GROAN NOISE. REVISED. *TT
EL01203
LEXUS LINK DIAGNOSTIC TROUBLE CODE 6. *TT
3LD
LIMITED SERVICE CAMPAIGN 3LD LEXUS LINK SYSTEM FLASH REPROGRAMMING - CAMPAIGN DETAILS. *TT
00203
BUZZ NOISE ON THE LAND LINE SIDE DURING A HANDS-FREE CALL. *TT *JB
020603
2001 LS430 REPAIR MANUAL CORRECTION - WIRELESS DOOR LOCK CONTROL SYSTEM. *TT
00501
DIAGNOSTIC TESTER IMMOBILIZER FUNCTIONS. *TT
01102
INTERMITTENTLY VEHICLE MAY NOT SHIFT OUT OF PARK AFTER DEPRESSING THE BRAKE PEDAL. *TT
01202
SUSPENSION BALL JOINT INSPECTION METHOD. *TT
EL00602
TECHNICAL INFORMATION INTRODUCING THE RAIN SENSOR FAILSAFE MODE OPERATION. *TT
BO00302
TECHNICAL INFORMATION ON A NEW DOOR LOCK WIRE DEVELOPED TO IMPROVE DOOR HANDLE FEEL. *TT
AX00301
HANDS FREE SOUND QUALITY IMPROVEMENTS FOR VEHICLES EXPERIENCING POOR SOUND QUALITY ON THE LANDLINE SIDE DURING A HANDS FREE CALL. *TT
AU00101
CUSTOMERS MAY COMPLAIN OF PROBLEMS REGARDING THE MARK LEVINSON SOUND SYSTEM. *SLC
ST00301
SUBJECT REGARDING STEERING COLUMN GROAN NOISE. *SLC
BR00301
SUBJECT REGARDING FRONT BRAKE GROAN/SQUEAK. *SLC
NV00901
SUBJECT REGARDING DOOR MIRROR WIND NOISE REDUCTION. *SLC
EL00501
SUBJECT REGARDING PROGRAMMING WIRELESS DOOR LOCK REMOTE TRANSMITTERS.*JB
EL00401
SUBJECT REGARDING TRUNK CLOSER MISOPERATION. *SLC
SS00501
DIAGNOSTIC TESTER IMMOBILIZER FUNCTIONS. *TT
SS00401
THIS BULLETIN INVOLVES THE CUSTOMIZE FEATURE OF THE ELECTRICAL FUNCTIONS. *JB
NV00801
SUBJECT REGARDING MOON ROOF DRAIN HOSE BEING LOOSE. *SLC
SS00301
SUBJECT REGARDING ELECTRONIC CONTROL UNIT FLASH REPROGRAMMING ERROR MESSAGE. *SLC
BO00701
SUBJECT REGARDING MOON ROOF REAR CORNER AIR LEAK. *SLC
NV00701
SUBJECT REGARDING REAR SEAT AND LUGGAGE COMPARTMENT CREAK REDUCTION. *SLC
NV00601
SUBJECT REGARDING SQUEAK AND RATTLE TIPS FOR THE INSTRUMENT PANEL METER CLUSTER. *SLC
EG00101
MALFUNCTION INDICATOR LAMP ON, P0300-P0308. *SLC
SS00101
SUBJECT REGARDING ECU FLASH REPROGRAMMING PROCESS. *TT
NV00301
SUBJECT REGARDING SQUEAK AND RATTLE TIPS. *SLC
SU00101
INFORMATION ON REDUCING FLUTTER AT HIGHWAY SPEEDS, THE FRONT SUSPENSION LOWER ARM NO.2 BUSHING HAS BEEN CHANGED.*JB
PG00501
INFORMATION ON ERASING DIAGNOSTIC TROUBLE CODES ONCE THE D/C CUT FUSE HAS BEEN INSTALLED DURING PDS. *TT
EG00200
THIS TECHNICAL SERVICE INFORMATION BULLETIN MENTIONS TO PREVENT OF OVERHEATING OF THE ENGINE WHEN TOWING A TRAILER WITH 2001 MODELYEAR VEHICLES, THE STANDARD RADIATOR SHOULD BE REPLACED WITH A HIGH COOLING EFFICIENCY RADIATOR. *TT
PG0100
SUBJECT REGARDING PRECAUTIONS USED FOR HANDLING OF REAR DOOR SUNSHADE. *TT
PG01100
TECHNICAL SERVICE INFORMATION BULLETIN REGARDING PRECAUTION FOR HANDLING REAR DOOR SUNSHADE. *TT
PG01000
THIS BULLETIN EXPLAINS THE INITIALIZATION PROCEDURE FOR THE DRIVER'S SEAT POSITION AND HEAD RESTRAINT HEIGHT ON CERTAIN 2001 MODEL YEAR VEHICLES. *TT
BR00200
INFORMATION ON THE INSTALLATION BOLTS FOR THE FRONT AND REAR BRAKE CALIPERS. *TT
PG00900
SUBJECT REGARDING FRONT LICENSE PLATE MOUNTING BRACKET INSTALLATION. *TT
PG00800
SOME VEHICLES WITHOUT NAVIGATION SYSTEMS ARE EQUIPPED WITH A COMPASS IN THE INSTRUMENT CLUSTER, JUST TO THE LEFT OF AND BELOW THE SPEEDOMETER. THIS BULLETIN CONTAINS PROCEDURES TO COMPLETE INITIAL CALIBRATION OF THE COMPASS DURING THE ROAD TEST SECTION OF PRE-DELIVERY SERVICE (PDS). *TT
SU00300
SUBJECT REGARDING WHEEL BALANCE ADJUSTMENT PROCEDURES (17
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.