Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
131-26018
Service Bulletin/Repair Instructions
TITLE - Carconfig update on EmiraDS. REASON - A new Carconfig file is available on EmiraDS to support any future ECU (Electronic Control Unit) software upgrades. Because the Carconfig is a common file shared across all ECU software packages, the “New Software Available” notification will be displayed on multiple ECUs, (except for CPC, EIS, EMS, FSCM, and TCM 2L ECUs). Important - This does not necessarily indicate that a specific upgrade is required for each ECU listed, but if a software notification is also available for the DDM (Driver Door Module), upgrading the DDM first will clear the notification for all other ECUs that do not have individually applicable upgrades. ACTION - If a vehicle connected to EmiraDS is displaying the “New Software Available” notification across multiple ECUs, then check to see if software notification is also available for the DDM. Upgrade the DDM first and then check to see if the “New Software Available” notification on other ECU’s has now been deleted.
131-26017
Service Bulletin/Repair Instructions
TITLE Availability of Emira service replacement lower front wishbone ball joint dust covers. REASON An unfinished rough edge, on the steering knuckle assemblies (hub carriers), can, under full suspension/steering movement, contact the lower wishbone ball joint dust cover, resulting in premature wear or damage to the dust cover. Service level dust covers are now available which prevent the replacement of complete front lower wishbones assemblies and associated labour times for suspension/steering alignment procedures because of split or damaged ball joint dust covers. ACTION If damage to the ball joint dust cover as shown above is seen during an underbody inspection (such as routine servicing etc), but the ball joint is still in a serviceable condition, then the rough edge of the steering knuckle casting should be smoothed and the ball joint dust cover replaced.
131-26016
Service Bulletin/Repair Instructions
Odometer mileage adjustment implications of module substitutions on Emira vehicles. For security, necessary data collection and to ensure the correct vehicle mileage is maintained in the event of a DIM/DHU (Driver Information Module/Display Head Unit) replacement, other specific modules as well as the odometer are constantly recording information such as vehicle speed, operating hours and the total vehicle mileage at the same time. Modules Recording Mileage Data Emira DIM (Driver Information Module) SRS (Supplementary Restraint System) module CEM (Central Electronic Module) VDDM (Vehicle Dynamics Domain Module) ECM (Electronic Control Module) Sometimes components including modules are taken either from stock or substituted/swapped over from other vehicles available to aid in diagnosing the cause of a fault with an owner’s vehicle. Any of the modules listed above must NEVER be fitted from a ‘donor’ (correctly functioning vehicle) for this purpose, as once connected to the faulty vehicle, the module with the highest mileage will overwrite the current recorded mileage stored in ALL those modules to that higher mileage. Never be tempted to swap over any of the modules shown on page 1 of the bulletin for either diagnostic fault finding purposes, or in an attempt to get an Emira back on the road.
131-26015
Service Bulletin/Repair Instructions
Checking the pyrotechnic seat belt pre-tensioner harness connector for security. The SRS (Supplementary Restraint System) seat belt pre-tensioner harness connectors are fitted with locking tabs to ensure their security to their pretensioner/seat belt reel assemblies. It cannot be confirmed if the locking tabs to the 2023 - 2025 model year VIN range* have been correctly secured during the production build process. *Safe VIN from SCCLEJAX1SHA11255. There is a possibility that the harness connectors may loosen or disconnect if the locking tabs are not secured, which may result in inoperative seat belt pre-tensioners and a warning message being displayed in the driver display module (SRS Service Required). Note: The mechanical locking functionality of the seat belts will still operate as normal even if the warning message is displayed.
131-26014
Service Bulletin/Repair Instructions
Fitment of tail lamp link lead harnesses to prevent rear tail lamp failure. Under a specific usage condition* one or both of the rear tail lamps can stop illuminating. *Hazard warning lights have been continuously activated for a prolonged time period with the ignition off and the tailgate closed. Turning the ignition on or opening the tailgate will reactivate the position lights, but the turn indicator fault will remain. Only turning on the engine will reactivate the CEM and correct the turn indicator fault. Link leads fitted between the engine compartment harness and rear lamp connector plugs are now fitted as a production running change to resolve this issue. The actions of this bulletin supersede the contents of Technical Service Bulletin TSB-131-26004 which affected 2024/2025 model year 4-cylinder vehicles only.
131-26009
Service Bulletin/Repair Instructions
Availability of ASO exhaust muffler (rear silencer) valve actuator as service replacement part. Until recently the failure of the exhaust muffler valve actuator has required the exhaust muffler and valve to be renewed as a complete assembly. The exhaust muffler valve actuator is now available as a separate replacement part. The advantages of not having to replace the combined assembly are for a faulty actuator are: - Less labour-intensive procedure to replace. - More practical to keep an exhaust muffler valve actuator as a parts stock item. If an exhaust muffler valve actuator is diagnosed as faulty then please determine if the exhaust flow valve mechanism in the rear silencer is operating and moving correctly*, if it is then please fit a new valve actuator instead of a complete muffler assembly. *Actuator replacement is only suitable if the exhaust flow valve mechanism in the rear silencer is operating and moving correctly. If the exhaust flow valve is not operating or seized, then the exhaust silencer or actuator assembly should be replaced.
131-26010
Service Bulletin/Repair Instructions
Installation of the latest DIM (Driver Information Module) software release. Following release of a previous DIM software release (IP18O.02), a false positive telematic notification is triggered in Central and South Americas vehicles which are not fitted with a Telematics Module (TEM). This generates an unnecessary warning symbol and failure message in the DIM for those market vehicles. A new global DIM software upgrade is available on EmiraDS classed as ‘Urgent’ for those market vehicles to resolve this issue. This upgrade is classed as ‘Non-urgent’ for all other market vehicles. Because this is a ‘Non-urgent’ upgrade, it is recommended to only perform this specific software upgrade in the event that the vehicle enters the workshop for any other service, repair or Class 2 action campaign work etc, allowing this upgrade to download at the same time. Any affected vehicle’s campaign status will be displayed on the Lotus Commercial Management System (LCMS). This software upgrade will not affect current vehicle functionality.
131-26007
Service Bulletin/Repair Instructions
Diagnosing medium temperature engine coolant thermostat operation to prevent unnecessary thermostat replacement. The information in this bulletin is intended as a procedure that should be performed if a 4-cylinder Emira has generated Diagnostic Trouble Code (DTC) P2CEF00 Auxiliary Thermostat “A” Stuck Open (see image for thermostat location). Generation of DTC P2CEF00 may also result in: - Illumination of the Malfunction Indicator Lamp (MIL). - A low coolant temperature warning message being displayed. IMPORTANT: Do not continue with the procedure in this bulletin If DTC P2CEF00 has NOT BEEN generated. 1. If the thermostat MOVES FREELY when heated and cooled, then refit the original thermostat with a new gasket and refill the engine with new antifreeze/coolant. 2. If the thermostat DOES NOT move freely when heated and cooled, then fit a NEW thermostat and gasket and refill the engine with new antifreeze/coolant. Carefully package the thermostat and contact Emira Support using LCMS to arrange collection.
131-26003
Service Bulletin/Repair Instructions
Updating the TEM (Telematics Module), to the latest level software. software update is now available to remove car configuration related DTCs (Diagnostic Trouble Codes) when the TEM is set to eCall or voice call only. Check and identify any affected Emira vehicles from your inventory stock, dealer demonstrators and customer vehicles to ensure that this campaign action is performed at the first opportunity. Any affected vehicle’s campaign status will be displayed on the Lotus Commercial Management System (LCMS). This software update will not affect current vehicle functionality.
131-25012
Service Bulletin/Repair Instructions
Introduction of the instrument panel upper trim assembly as a service replacement part. REASON - Soon, it will be no longer necessary to order a complete instrument panel assembly if replacement is required because of trim cracking/shrinkage etc to the upper trim assembly. Instrument Panel Upper Trim Assembly Improvements A. Additional leather and fixing staples above the DIM area. B. Addition of top hat and speaker bracket. C. Additional 5mm fold back area of leather trim. ACTION - Instrument panel upper trim assemblies should be available from week beginning 01/12/2025. Full details of the 8 instrument panel upper trim assembly part numbers options now available to order on LCMS can be found in section 6 (interior trim) > subsection 19 Instrument Panel > 620 14.05 (instrument panel) in the Emira parts catalogue. The service level upper trim assembly is pre-fitted with the Plate-Instrument Panel Mid Uppr Trim, but a replacement emblem (5), as well as an upper trim assembly fixing kit (part number 8902630235) with the items listed below must also be ordered on LCMS. Upper Trim Assembly Fixing Kit Contents Item Part Number Description Qty/Kit 1 8902585734 Bolt-Self-Tap Screw T4.2X019 4 2 8904423493 Speaker Bracket 1 3 8901423491 Top Hat Bracket 1 4 A132V6050V/1 Anti-Squeak Tape 25mm 1 Not Supplied Order Separately Qty/Vehicle 5 Emblem 1
131-25021
Service Bulletin/Repair Instructions
Brake pad to rotor stiction damage caused by incorrect vehicle storage maintenance. REASON - Prolonged contact between brake pads and rotors (discs) can result in them sticking to each other (also referred to as brake stiction). This could result in the brake pad material pulling away from its backing plate when the vehicle is eventually moved. Brake stiction occurs when the vehicle remains stationary for extended time periods and can also be exacerbated by: - Long term storage in a moist environment. - The presence of chemical contaminates (such as those found in some cleaning products). - Salt contaminated moisture in coastal regions. Background - Brake stiction is a known issue for sports cars such as the Emira. This is caused by several factors such as the specific chemical composition of the brake pad/rotor material as well as the brake pad, caliper and rotor geometry set up required to achieve the desired braking performance characteristics expected from a sports car. The Lotus Emira was designed and developed as a high-performance sports car and the engineering selection of a mixed metal pad material, the dimensions, and other specifications were tested and approved by the attributes team as well as tested to meet the stringent vehicle homologation targets across the regions, and durability requirements. ACTION - Due to a small number of complaints where brake pad separation has occurred caused by stiction on very low mileage cars, Lotus wishes to confirm to their importers and retail partners the importance of following the vehicle stock maintenance guidelines. Also refer to the ‘Dynamic’ section in long term storage check list attached to the end of this bulletin. As well as to stress that after any cleaning the vehicle it should be driven to dry the brakes, and vehicles should not be exposed to prolonged high humidity or stored in wet areas. To ensure ongoing enjoyment of the product, a specific recommendation was included in the customer handbook under the vehicle maintenance and care section: “NOTE: To prevent binding between the brake pads and discs as well as avoiding any potential corrosion, it is recommended to drive the vehicle for a short distance immediately after washing”.
131-25010
Service Bulletin/Repair Instructions
Updating the VDDM (Vehicle Dynamics Domain Master), to the latest level software. A new VDDM SW update is being installed as a production running change. This new SW update will improve vehicle functionality for continued customer satisfaction as well as fixes including: Customer Improvements - AEB Allowed Speed Drop Adjustment. - ACC and Speed Limiter Improvement. Bug Fixes - EGSM ‘shifter stuck’ implementation. - PMF. PSCM PMF Monitoring Deactivation. - ECM DTC. ACTION - Check and identify any affected Emira vehicles from your inventory stock, dealer demonstrators and customer vehicles to ensure that this campaign action is performed at the first opportunity. - Any affected vehicle’s campaign status will be displayed on the Lotus Commercial Management System (LCMS). - Ensure that the vehicle owner has been made aware of the updates to vehicle functionality. Procedure Preparation: Using the Lotus Insight tool*, the Emira Diagnostic System will show the availability of a new software version for the VDDM. *Note: This MUST be done using the Lotus Insight Tool.
131-25011
Service Bulletin/Repair Instructions
Updating the CEM (Central Electronic Module), to the latest level software. A new CEM SW update is being installed as a production running change. This new SW update will implement the Car Configuration Logic changes to reduce the DTCs reported when cars with a non-convenience seat pack are requested, (memory seats and auto angling mirrors not fitted). - Check and identify any affected Emira vehicles from your inventory stock, dealer demonstrators and customer vehicles to ensure that this campaign action is performed at the first opportunity. Any affected vehicle’s campaign status will be displayed on the Lotus Commercial Management System (LCMS). NOTE: This CEM SW update will not affect current vehicle functionality Preparation: Using the Lotus Insight tool*, the Emira Diagnostic System will show the availability of a new software version for the CEM. *Note: This MUST be done using the Lotus Insight Tool.
TSB 131-25001
Service Bulletin/Repair Instructions
Confirmation of windscreen preparation requirements prior to fitment if required. REASON - The windscreen replacement procedure shown in the Emira service notes (operation code 11.01.01-02), describes the process for the fitment of a windscreen onto a new production windscreen frame. The procedure currently shown in the service notes will be amended at the next scheduled update to include additional information for aftersales windscreen replacement. Note: Most replacement windscreens are installed by professional auto glass fitters using best industry practices including windscreen frame and glass preparation, using methods similar to the text as shown below in this bulletin. ACTION - If required, please ensure that any Lotus technician or auto glass representative who is fitting a new windscreen to an Emira on your Dealerships behalf is made aware of this bulletin.
TSB-131-24030
Service Bulletin/Repair Instructions
Inspection of transmission driveshaft fitment/security if specific faults are reported. Lotus has received reports from the dealer network of: ̵ Loss of drive. ̵ Oil leaking from the transmission driveshaft seals. ̵ Transmission noise while driving. It has been identified that a potential cause of these issues is as a result of the driveshafts not being fully locked in position into the transmission at the time of vehicle assembly. Start of production for both Emira V6 powertrain (manual and automatic) and Emira 4-cylinder DCT up to 2025 model year VIN SCCLEKAX4RHB12094 inclusive. If an Emira owner contacts you, or you are presented with a vehicle within the affected VIN range which has any of the transmission faults listed above*, then the following transmission components must be checked for damage caused by incorrect installation: ̵ Driveshaft splines. ̵ Driveshaft circlips. ̵ Driveshaft oil seal. *Note: If the only fault is transmission fluid leakage from a driveshaft seal because the driveshaft is not fully locked into position and the vehicle is only at delivery mileage (less than 100 miles/160 km), then it is acceptable to push the driveshaft back into position if a visual inspection shows that the driveshaft seal has not been damaged, (and then check/top up the transmission oil level). Refer to the operation codes for driveshaft removal and re-fitment shown in sections 47.15. for both V6 and 4-cylinder powertrains from the Emira service notes which are available to view from the aftersales dealer portal at: https://dealerportal.uslotservice.lotuscars.com/log-in - from the Aftersales tab, select Service Manuals > Emira.
TSB-131-24020
Service Bulletin/Repair Instructions
New operation required for Emira service schedule sheets. During normal road use, it has been identified that dirt/grease/road debris can accumulate around the WSS (Wheel Speed Sensors) and the magnetic rings located on the rear of the hub units. This accumulation may affect the signal being transmitted to the VDDM (Vehicle Dynamics Domain Master), also known as the ABS module, which can result in the generation of diagnostic trouble codes, activating the illumination of the amber colour MIL (Malfunction Indicator Lamp). ACTION To ensure continuing customer satisfaction, Lotus will update the ‘Braking’ section of the V6 and 4-Cylinder Emira service schedule sheets to include a new operation to remove any loose debris on all four WSS using a suitable airline, then inspect and clean the WSS with a clean cloth and brake cleaner to remove any dirt deposits. At the same time the corresponding magnetic rings on the rear of the hub units should also be cleaned. This new procedure should be carried out at every service interval. Emira V6: Original Part Number - LSL689 Updated Part Number - LSL689a Emira 4-Cylinder: Original Part Number - LSL692 Updated Part Number - LSL692a
TSB-131-24011
Service Bulletin/Repair Instructions
Fitment of lower spring seat isolator to front damper assemblies to eliminate scraping noise whilst driving. Movement between the contact areas of the front damper spring seats and road springs can cause a scraping noise whilst driving. If this scraping action is occurring, then it will also cause visible witness marks on the spring seat/spring contact area. To prevent this scraping action on customer vehicles, the isolators already fitted to the upper spring seat, can now also be fitted to the base of the front road springs. As a production running change, lower spring seat isolators will also be fitted from: Emira V6 VIN: SCCLEKAX5PHN10585