Vehicle report

2016 MACK PINNACLE (PI/PN)

Compare every MACK PINNACLE (PI/PN) yearNHTSA and EPA records

Service bulletins

11 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

CBR 2362-3 202604

Service Bulletin/Repair Instructions

CBR - Mack Carrier Nut Adhesive Change.

CBR 2573-1 202604

Service Bulletin/Repair Instructions

CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.

CBR 820-9 202601

Service Bulletin/Repair Instructions

CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.

CBR 2171-11 202511

Service Bulletin/Repair Instructions

CBR - Mack Temperature Sensor Troubleshooting Guide

CBR 2488 072025

Service Bulletin/Repair Instructions

CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.

CBR 407 072025

Service Bulletin/Repair Instructions

CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.

CBR 170-8 202505

Service Bulletin/Repair Instructions

Inactive Code P25AE00 Being Generated After A Hard Pull And A Momentary Drop In Engine Oil Pressure (Low Oil Pressure) (Possible Related Codes - SPN4811 , SPN 100 , PID 100)

CBR 2464-1 202505

Service Bulletin/Repair Instructions

Mack Chassis - Rear Axle Overheat

CBR-2452 202503

Service Bulletin/Repair Instructions

If the vehicle door is open and the truck is in neutral, a popup message may appear on the Driver Information Display (DID) instructing the operator to shift into neutral. If this message appears while the vehicle is already in neutral, the Instrument Cluster (IC)requires a software update.

CBR-561 202503

Service Bulletin/Repair Instructions

If oil dilution is suspected refer to the applicable CBR solution below: ∙ CBR-659􀁡Mack Chassis - Oil Diluted With Fuel; Fuel In Oil, Diagnostic Information - All Emissions, All Model Years

CBR-2016 202412

Service Bulletin/Repair Instructions

Frame lean can be caused by several seemingly isolated possibilities. The two most common are suspension and frame assembly issues.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.