CBR 2362-3 202604
Service Bulletin/Repair Instructions
CBR - Mack Carrier Nut Adhesive Change.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
CBR 2362-3 202604
CBR - Mack Carrier Nut Adhesive Change.
CBR 2573-1 202604
CBR - Mack Chassis - Through Shaft Bearing Retainer Breakage On Mack Carriers.
CBR 820-9 202601
CBR - Mack Chassis - Engine Brake Only Works With The Brake Pedal, No Function During Cruise. US07 And Newer Emissions, Model Year 2008 And Newer.
CBR 2488 072025
CBR - A significant GPS reporting issue is affecting fleet operations, with trucks maintaining back-office communication but failing to transmit GPS location data.
CBR 407 072025
CBR - To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP file will need to downloaded.
CBR 170-8 202505
Inactive Code P25AE00 Being Generated After A Hard Pull And A Momentary Drop In Engine Oil Pressure (Low Oil Pressure) (Possible Related Codes - SPN4811 , SPN 100 , PID 100)
CBR-561 202503
If oil dilution is suspected refer to the applicable CBR solution below: ∙ CBR-659Mack Chassis - Oil Diluted With Fuel; Fuel In Oil, Diagnostic Information - All Emissions, All Model Years
CBR-997 202411
Vehicles may present with oil leak coming from the clutch/flywheel housing and observation of burned clutch smell or clutch slipping. These symptoms can be mistaken as a crankshaft rear main seal leak, when the actual cause is the crankshaft adaptor O-ring.
CBR-407 202409
CBR: To correct the MID136 SID 66 FMI 7 fault code the latest Bendix VCP fi le will need to be downloaded.
CBR-561 202408
CBR: 11L, 13L, And 16L Engine Oil Analysis Specifications - US10 And Newer Emissions
CBR-2350 202407
CBR: Telematics Gateway (TGW) Connect Ability Issues
CBR-2383 202406
CBR - Accelerator Pedal: Inspection Instructions
CBR-1008 202404
CBR: Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F, mDrive) Missing X1 Value In VDA And Default Settings Guidelines, ParameterP1AOB; Fault Code P1052-54, Error 40,Or Error 18 Encountered During Clutch Or Tran.
CBR-2350 202402
CBR -Telematics Gateway (TGW) Connect Ability Issues
CBR-2014 202402
CBR - Driveline Noise, Suspension Ride Height Too High, Suspension Will Not Exhaust - Chassis Built 2016w01 And Newer.
CBR-202 202402
CBR - Automated Manual Transmission ( AMT ) Flywheel Pilot Bearing Wear On Input Shaft.
CBR-2347 202402
CBR - Active "Set Park Brake" Message On Drivers Information Display (DID).
CBR-2333 202401
CBR: TGW Will Not Connect After SIM Card Replacement
M-465-001 202311
TSB: Mack Trucks now offer an improved HD Inter-Axle Through Shaft for the CRD 125, 150, 180, and 200 family carriers. The new HD shaft went into production on January 23rd, 2023 for 2.54 - 3.50 axle ratios and April 1st, 2023 for 3.56 - 3.98 ratios. The new HD through shaft is an upgrade over the current standard shaft and can now be used as a replacement part instead of the standard shaft. The new HD shaft has a new design to increase strength, longevity and life over the standard shaft.
CBR-995 202310
CBR: Telematics Gateway ( TGW, MID 142 ) Losing Communication With The Instrument Cluster ( IC ) - Counts Of Fault Code (FC) MID 140 PSID 239 FMI 12 Data Link, MID 142 Faulty Device or Component Logging, Possibly Following Engine Start.
M-258-014 202309
TSB: Aftertreatment Diesel Exhaust Fluid (DEF) Tank, Level Sensor, Replacement
M-141-001 202308
TSB: Air Restriction Indicator
M728-005A 202308
TSB: Barksdale Leveling Valve, Leak Test
CBR-2303 202307
CBR: Mack DEF Dosing Valve Diagnostic Trouble Codes (DTC) P202D00, P208E00, P103B00 - US10+OBD13 And Newer Emissions
KC-503-Ver3
CBR: Automated Manual Transmission ( AMT ) -Transmission Electronic Control Unit ( TECU ) MID130 PSID 29 FMI 7 /P10AE81 Fault Codes Being Generated
KC-2229-Ver2
CBR: Automated Manual Transmission (AMT) Transmission Kickdown Mode
KC-474-Ver5
CBR: Diagnostic Trouble Code (DTC) P215A-64, Fault Code SPN 84 FMI 19
M-265-002
TSB-Charge Air Cooler t-clamp install.
M-728-001
2008 Document reformatted to be published as a TSB in Impact. Air suspension ride height.
M-652-002
2008 Document reformated to be published as a TSB in Impact. Torque rod interference.
M-801-001
2008 Document reformatted to be published as a TSB in Impact. Paint protection.
M-255-001
2009 Document reformatted to be published as a TSB in Impact. Turbo mounting hardware replacement.
M-255-016
2009 Document reformatted to be published as a TSB in Impact. Turbo Actuator Connector Repair.
M-652-001
2009 Document reformatted to be published as a TSB in Impact. Axle Alignment Specifications
KC-750
US10 Emission Engines - Diagnostic Trouble Code ( DTC ) SPN 1231 FMI 9 Troubleshooting.
KC-751
Vehicles Equipped With An Automated Manual Transmission Model D or F ( AMT-D, AMT-F ) - Transmission Oil Leakage From Transmission Input Shaft Seal Or Output Shaft Seal - US10 And Newer Emissions, Common Model Years 2010 And Newer.
KC-745
Automated Manual Transmission ( AMT ) I-Shift / mDRIVE - Ribbon Harness Replacement - Speed Sensor Bolts, Possible Fault Codes P1058 - 21 Or MID 130 PID 161 FMI 1
KC-2112
Programming Failure - Chassis With Cummins Engine And An Allison Transmission
KC-2143
(Back Office) - Cruise Control Inoperative After Updating Software VECU5 Without ESP Package (UESP).
KC-405
Warranty Automated Manual Transmission ( AMT, I-Shift, mDrive ) Control Housing Assembly; Guidelines For Filing A Claim For Chassis Return Visit With Transmission Issues After A Repair Requiring Control Housing Removal And Reinstallation - US07 And N.
KC-735
Premium Tech Tool (PTT) - Message For Data Mismatch, Product Configuration Mismatch; Instruction To Run An Accessory Kit Displayed When Attempting To Run Diagnostics For Diagnostic Trouble Codes (DTC) Or Programming - US10+OBD13 And Newer Emissions,
KC-2116
NOx Sensor Troubleshooting Guide - US10+OBD13 And Newer Emissions.
KC-2158
Selective Catalytic Reduction (SCR) Muffler Troubleshooting Guide - US10+OBD13 And Newer Emissions.
KC-2165
DEF Pump Troubleshooting Guide - US10+OBD13 And Newer Emissions.
KC-731
Mack Chassis - Equipped With An Automated Manual Transmission Model D or F (mDrive, AMT-D, AMT-F) - Transmission Oil Leakage From Transmission Input Shaft Seal Or Output Shaft Seal - US10 And Newer Emissions, Common Model Years 2010 And Newer
KC-2131
USE FOR NEW VEHICLES (US21+OBD22 Emissions) - Intermittent Diagnostic Trouble Codes U02A3, U029D, U029E
KC-2171
Temperature Sensor Troubleshooting Guide - US10+OBD13 And Newer
KC-714
Mack Chassis - Diagnostic Trouble Codes ( DTC's ) - P020113, P020213, P020313, P020413, P020513, P020613, Cylinders 1 Through 6 Injector A Open Circuit
KC-698
Mack Chassis - Diesel Exhaust Fluid ( DEF ) System Cleaning/Flush After DEF Pump Failure Or System Contamination
KC-699
Mack Chassis - Bendix Vendor Configuration Program ( VCP ) Software Download Information
KC-686
(Back Office Only) Mack Chassis - Cruise Control Inoperative After Disabling The Electronic Stability Program (ESP)
KC-663
Emcon (Spark Assist) Engine Aftertreatment System Troubleshooting Check Sheet - US07 Emissions
KC-644
Manual Compression Test Adapter For Engines With Stainless Steel Injector Sleeves (Conical Tip Injectors) - US07 And Newer Emissions, Model Year 2008 And Newer
KC-648
Mack - PTO Pump Speed Calculator
KC-652
Mack Low Oil Pressure Diagnostic Process For 11 Liter Engines
KC-2169
Low Voltage Disconnect (LVD), Function Description
KC-2170
Electronically Controlled Suspension (ECS) Losing Air Pressure
KC-2172
No Start Condition After Over The Air Programing - VECU5 No Start "Safe State"
KC-2161
DEF Pump Cycling periodically Hours After Key Off
KC-633
Mack Chassis - Front Hub With Unit-Bearings ( Unitized Wheel Bearings ), Inspection Information And Guidelines - Commonly Model Year 2008 And Newer
KC-626
Mack Chassis - Vehicles Equipped With An Automated Manual Transmission Model F ( AMT-F, mDrive ), Premium Tech Tool ( PTT ) Gearbox Calibration Failure; Gearbox Calibration Operation Stops And Fails At 33% When Run With Transmission Removed
KC-627
Premium Tech Tool ( PTT ) Training Materials And Support Tools
KC-629
Mack SNM14-038 When And How To Contact Tech Support ( eService & Phone )
KC-916
Mack Chassis - Replacement / Upgrade Of The Programmable Global Audio ( GLAD ) Radio With A Non-programmable Radio
KC-610
Mack Delphi Radio Theftlock Code Generator
KC-611
Mack SNM14-015 " Revised " Alternative Towing Procedures For m-DRIVE Equipped Chassis
KC-826
Volvo Chassis - Crankcase Ventilation ( CCV ) Oil Leaks - Technical Service Bulletin M-257 - 004, Technical Service Bulletin M-257 - 006 - US14 And US15 Emissions
KC-552
Aftertreatment Control Module ( ACM ) Diagnostic Trouble Codes ( DTC ) U0001-88 and U0010-88 Lighting The Malfunction Indicator Lamp ( MIL ); Possible Derate Warning â US10 And Newer Chassis
KC-561
Engine Oil Analysis Specifications - US10 And Newer Emissions
KC-492
Diagnostic Trouble Code (DTC) P04DB - Crankcase Ventilation Disconnected; US10+OBD13 To US14+OBD16 Emissions
KC-495
Intake Pre-heater Electrical Schematics (Diagrams) - US10+OBD13, US14+OBD13 To US14+OBD16 Emissions
KC-2157
Aftertreatment Hydrocarbon Injector (AHI) Troubleshooting Guide - US10+OBD13 And Newer Emissions
KC-478
Variable Geometry Turbocharger ( VGT ) Function Test ( 2551-08-03-02 ), OBD13 Model Year ( MY ) 2014 And Newer
KC-450
Diagnostic Trouble Codes ( DTC ) P20EE, P207F And P103C, Diagnostic Procedure - REPLACES GUIDED DIAGNOSTICS IN PREMIUM TECH TOOL ( PTT ) - US10+OBD2013 to US14+OBD2016 (Non-Common Rail) Emissions, Commonly Model Years 2014 To 2017
KC-415
Diagnostic Trouble Code ( DTC ) P26E8 Intermittently Lighting The Malfunction Indicator Lamp ( MIL ); Possible Derate Warning - US10+OBD13 And Newer Emissions, Model Year 2014 And Newer
KC-402
Volvo Chassis - Diagnostic Trouble Code (DTC) SA 0 FMI 0 or SPN 0 FMI 0 Present On Fault Code Readout - US10 And Newer Emissions, Model Year 2011 And Newer
KC-404
Volvo Chassis - Diesel Exhaust Fluid ( DEF ) Contamination In Fuel System, Inspection And Repair - US10 to US14 ( Non-Common Rail Fuel System )
KC-286
Mack Chassis - FSB 563-008 Plugs, Pressure Protection Manifold - New Brass Plugs For Noregon Pressure Protection Manifold (PPM)
KC-238
Mack Chassis - Where To Find The Body Builder Portal - Body Builder Manual ( BBM ) Information - US04 And Newer Emissions, Model Year 2008 And Newer
GDC21-011
Exhaust Gas Temperature Sensor Circuit Range/Performance
KC-145
Automated Manual Transmission (AMT) (Spigot Bearing) Input Shaft Repair Kit And Shim Kit, Part Number Information, Reference Guide - US07 And Newer Emissions, Model Year 2008 And Newer
KC-119
Mack Chassis - Equipped With An Automated Manual Transmission (mDrive, AMT) AMT-C, AMT-D Or AMT-F - Transmission Oil Specifications - Model Years 2010 To 2020
KC-73
Mack Chassis - Disabling The Driver ID; Removing the Driver ID Prompt - US07 To US14+OBD16 Emissions, Model Years 2008 To 2017
KC-167
Premium Tech Tool (PTT) Error Code 43: Service Regeneration Fails To Start; Service Regen Does Not Complete With Error 43 Displayed - US10+OBD13 And Newer Emissions, Common Model Year 2014 And Newer
KC-163
Diesel Fuel Information - Acceptable Biodiesel, Fuel Blend For Summer And Winter - US07 And Newer Emissions, Model Year 2008 And Newer
KC-136
Aftertreatment Control Module (ACM) Offline/Not Visible/Missing From Control Unit Information in Premium Tech Tool (PTT) - US10+OBD13 And Newer Emissions
KC-124
Automated Manual Transmission Gearbox Will Not Shift To High Range After Gearbox Repair; MID 130 PSID 24 FMI 1, P1072-92 Unintentional Disengagement Of High Range - US07 And Newer Emissions, Model Year 2008 And Newer
KC-115
Automated Manual Transmission ( AMT ) ( I-Shift, mDRIVE ) Equipped Chassis, OBD13 And Newer - Light Turbo Surge ( Chuff ) During Skip Shifting
KC-692
Lighting Control Module ( LCM ) Replacement - Refer To Technical Parts Information ( TPI ) 364 - 034 Control Unit
CBR-15
Diagnostic Trouble Codes (DTC) For The Engine Pre-Heat Relay: Supplementary Instructions
FSB 491-032
Transmission Oil Cooler Hose, Replacement
K53338075
Diagnostic Trouble Codes (DTC) For The Engine Pre-Heat Relay: Supplementary Instructions - US10+OBD13 And Newer Emissions, Model Year 2014 And Newer
K98892323
Diagnostic Trouble Codes ( DTC ) P20EE, P207F And P103C, Diagnostic Procedure - REPLACES GUIDED DIAGNOSTICS IN PREMIUM TECH TOOL ( PTT ) - US10+OBD2013 to US14+OBD2016 (Non-Common Rail) Emissions, Commonly Model Years 2014 To 2017
K17028411
Electronic Control Unit (ECU) Replacement (EMS, VECU, TECU, LCM) - Programming (Conversion Kit) Requirements When Installing An ECU With A Newer Part Number - US04 To US10 Chassis (9-Pin Diagnostic Connector)
K23884537
Diagnostic Trouble Code (DTC) P04DB - Crankcase Ventilation Disconnected; US10+OBD13 To US14+OBD16 Emissions (Non-Common Rail Fuel System), Common Model Years 2014 To 2017
K21250579
Mack Chassis - Equipped With An Automated Manual Transmission Model D or F ( mDrive, AMT-D, AMT-F ) - Transmission Oil Leakage From Transmission Input Shaft Seal Or Output Shaft Seal - US10 And Newer Emissions, Common Model Years 2010 And Newer
K91214678
Automated Manual Transmission (AMT) Faults - Diagnostic Trouble Codes (DTC) P1052-18 Or MID 130 PID 33 FMI 5 Intermittent Fault In Cold Weather - US07 And Newer Emissions, Model Year 2008 And Newer
K16925952
** Tech Tip ** TT - 007 - 2015 - Diagnosing The Aftertreatment Control Module DTCs P202D, P208E, P20E8 - OBD13 (Commonly Model Year 2014); Newer Chassis AFTER Reviewing Other Solutions
K84061935
Mack Chassis - Diagnsotic Trouble Code P026D-00, Fuel Injection Quantity Higher Than Expected; Diagnosis And Information - US14+OBD15 Emissions, Model Year 2016
K84940464
Expired - Refer To K45673535 - Mack Chassis SNM15-002b mDRIVE Transmission Service Strategy ( Revised failure mode descriptions )
K23315031
Fuel Tank Strap Insulator Design Update; Fuel Tank Strap Appearance Changed
K71448442
Mack Chassis - Diagnostic Trouble Codes (DTC) P2604 , P2606 - Intake Heater / Preheater / Preheat "A" Circuit Range / Performance - US10+OBD13, US14+OBD13 To US14+OBD16, Model Years 2014 To 2017
K93823300
Mack Chassis - Pinnacle (CHU,CXU,PI), Anthem (AN), Granite (GU,GR) With Mack Engine ONLY - Power Take Off ( PTO ) Engine Speed Control Inoperative; Engine Speed Does Not Ramp When PTO Is Activated - Model Year 2007 And Newer
K25229168
Automated Manual Transmission Gearbox Will Not Shift To High Range After Gearbox Repair; MID 130 PSID 24 FMI 1, P1072-92 Unintentional Disengagement Of High Range - US07 And Newer Emissions, Model Year 2008 And Newer
K09336850
Mack Chassis - Diagnostic Trouble Code ( DTC ) P2002, Diagnostic Information - US10+OBD13, US14+OBD13, US14+OBD15, US14+OBD16 Emissions (Non-Common Rail Fuel System), Commonly Model Years 2014 to 2017
K72614548
Diagnostic Trouble Code ( DTC ) P02FA Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
K01050303
Diagnostic Trouble Code ( DTC ) P0471 Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
K04342327
Diagnostic Trouble Code ( DTC ) P0420 Illuminating The Malfunction Indicator Lamp (MIL) - US17 (GHG17, Common Rail Fuel System) Chassis ONLY
K47547856
Particulate Matter ( PM ) Sensor Diagnostic Trouble Codes ( DTC ) Illuminating The Malfunction Indicator Lamp ( MIL ); Tech Tip TT-014-2016 - OBD16 And Newer Emissions (Commonly Model Year 2017, Includes Common Rail Fuel System Chassis), Rewritten to split emissions levels, reflect GHG17 software release
K58557784
Fuel Injector Offset Learning Diagnostic Trouble Codes ( DTC ) / Fault Codes Logged In Engine Control Module ( EMS ); Possible Rough / Uneven Idle - OBD15 Chassis
FSB284064
ECM and ACM Reprogramming, OBD2015
K43056254
Mack Chassis - Aftertreatment Control Module ( ACM ) not visible in Premium Tech Tool ( PTT ).Added more checks and procedures
K82320750
Automated Manual Transmission ( AMT - F ) ( mDRIVE ) Clutch Valve Unit ( CVU ) Makes Intermittent Buzzing Noise With The Key On And Engine Off.Changed repair information to reflect new software available.
K95422063
Mack Chassis - Diagnostic Trouble Code ( DTC ) P2459 Lighting The Malfunction Indicator Lamp ( MIL ); Possible Frequent Regeneration Requests - OBD15 And Newer Chassis
K86094641
Mack Chassis - Diagnostic Trouble Code ( DTC ) P226C Intermittently Lighting The Malfunction Indicator Lamp ( MIL ) - OBD15 And OBD16 Conventional Chassis.Updated to reflect release of FSB284-064 (Above)
K42708399
Diagnostic Trouble Code ( DTC ) P0422 Lighting The Malfunction Indicator Light ( MIL ) - OBD15 And OBD16 Chassis (Non-Common Rail).Updated to reflect release of FSB284-064 (Above)
K84412328
Diagnostic Trouble Code ( DTC ) P249C Intermittently Lighting The Malfunction Indicator Lamp ( MIL ) - OBD15 And OBD16, Model Year ( MY ) 2016 and 2017 Chassis.Updated to reflect release of FSB284-064 (Above)
K77864401
Mack Chassis - Diesel Exhaust Fluid ( DEF ) System Cleaning/Flush After A Pump Failure or System Contamination.Removed Tech Tip, Added correct operation ID
K53510452
Expired - Refer to K93039325 - Mack Chassis - SNM16-032 DEF (Diesel Exhaust Fluid) Contamination In Diesel Fuel.New solution released with improved information
FSB652-005
On some MACK CHU, CXU, GU, TD, LEU, LR, and MRU trucks built from 01/14/2013 and 01/20/2017, the V-Stay carrier bolt hole in the mRide suspension may become stripped, causing the V-Stay torque rod bolt to pull free from the carrier housing.
FSB373-024
Some Mack trucks equipped with mDrive transmissions built between September 6, 2010 and August 14, 2017 may have PTO solenoid bracket or transmission harness connector failures due to excessive vibration.
FSB 213-002
IN SOME INSTANCES THE EXHAUST ROCKER PISTON CAP SCREW MAY BECOME LOOSE AND BACK OUT CAUSING LOSS OF ENGINE COMPRESSION, OR A MECHANICAL INJECTOR DIAGNOSTIC TROUBLE CODE (DTC).
FSB 593-013
ON SOME MACK CHU, CXU, GU, AND TD TRUCK MODELS BUILT BETWEEN 04/31/2008 AND 05/12/2014, THE SOLENOID VALVE FOR THE GRADE GRIPPER FEATURE IS PRONE TO INTERNAL CONTAMINATION IN HARSH ENVIRONMENTS. THE INTERNAL CONTAMINATION OF THE SOLENOID VALVE IS CAUSED BY THE BUILDUP OF GRIME, SALT, ROAD DEBRIS AND OTHER SOLID CONTAMINANTS. IN SOME CASES, THE BUILD-UP OF SOLID CONTAMINANTS CAUSED THE SOLENOID VALVE TO MALFUNCTION. THE MALFUNCTION CAUSES THE TRAILER BRAKE CIRCUIT TO MAINTAIN TRAILER BRAKE PRESSURE AFTER A GRADE GRIPPER EVENT.
SC0403
INTERAXLE YOKE RETAINING NUT RECALL.
FSB873-020
HVAC FLANGE, INSTALLATION, CHU, CXU, GU, TD.
FSB 593-013A
GRADE GRIPPER SOLENOID, REPLACEMENT. ON SOME MACK CHU, CXU, GU, AND TD TRUCK MODELS BUILT BETWEEN 04/31/2008 AND 11/30/2015, THE SOLENOID VALVE FOR THE GRADE GRIPPER FEATURE IS PRONE TO INTERNAL CONTAMINATION IN HARSH ENVIRONMENTS. THE INTERNAL CONTAMINATION OF THE SOLENOID VALVE IS CAUSED BY THE BUILDUP OF GRIME, SALT, ROAD DEBRIS AND OTHER SOLID CONTAMINANTS. IN SOME CASES, THE BUILDUP OF SOLID CONTAMINANTS CAUSED THE SOLENOID VALVE TO MALFUNCTION. A SIMILAR MALFUNCTION IS POSSIBLE IF THE SOLENOID VALVE IS EQUIPPED WITH A VENT FITTING THAT FREEZES OVER. THE MALFUNCTION CAUSES THE TRAILER BRAKE CIRCUIT TO MAINTAIN TRAILER BRAKE PRESSURE AFTER A GRADE GRIPPER EVENT.
FSB 593 013
On some MACK CHU, CXU, GU, and TD truck models built between 04/31/2008 and 11/30/2015, the solenoid valve for the grade gripper feature is prone to internal contamination in harsh environments. The internal contamination of the solenoid valve is caused by the buildup of grime, salt, road debris and other solid contaminants. In some cases, the buildup of solid contaminants caused the solenoid valve to malfunction. A similar malfunction is possible if the solenoid valve is equipped with a vent fitting that freezes over. The malfunction causes the trailer brake circuit to maintain trailer brake pressure after a grade gripper event. Replacement of the existing solenoid valve, elbow, and the addition of a new tube fitting and tube will ensure proper functionality of the grade gripper feature.
PI 0862
V-STAY ROD COVER, REPLACEMENT. SOME MACK CHU, CXU, GU, TD, LEU, MRU, AND LR TRUCKS BUILT FROM 03/19/2012 TO 08/30/2015 AND EQUIPPED WITH MRIDE SUSPENSIONS MAY INADVERTENTLY LOSE THE V-STAY ROD COVER (PART NUMBER 21896762) FROM THE V-STAY ROD. THE REPLACEMENT V-STAY ROD COVER WILL BE INSTALLED AND SECURED WITH A TACK WELD IN TWO PLACES (180 DEGREES APART).
PI 0861
Clutch Pedal Micro Switch Replacement.
FSB 284-061
REGENERATION TEMPERATURES. CERTAIN MACK VEHICLES BUILT BETWEEN JANUARY 1, 2013 AND AUGUST 17, 2015 MAY EXPERIENCE A PREMIUM TECH TOOL (PTT) ERROR CODE 38 FOR SCR OVERTEMP WHEN PERFORMING A PTT REGENERATION. IF ERROR CODE 38 OCCURS, CHECK THE ENGINE ECU MAIN SOFTWARE BEFORE PERFORMING ANY TROUBLESHOOTING.
FSB-284-061
MACK TRUCK: SHOULD REPROGRAMMED ENGINE ECU AND AFTERTREATMENT CONTROL MODULE (ACM) DUE TO PREMIUM TECH TOOL EXPERIENCE AN ERROR CODE 38 FOR SCR OVERTEMP AND ENGINE ECU SOFTWARE NEEDS CHECKING FOR ANY TROUBLESHOOTING IS PERFORMED. MODEL 2013-15 CHU, CXU, GU, LEU, MRU, TD. *PE
PI 0855
OBD2013 SOFTWARE UPDATES. SOFTWARE UPDATES WITH ENHANCEMENTS ARE AVAILABLE FOR THE ENGINE CONTROL MODULE (ECM) AND AFTERTREATMENT CONTROL MODULE ACM) FOR MACK MP7, MP8 AND MP10 ENGINES ON OBD2013 VEHICLES BUILT FROM FEBRUARY 1, 2013 TO FEBRUARY 6, 2014.
293-027
EGR MASS FLOW RATE LOW. THIS BULLETIN IS RELEASED TO ADDRESS HIGH COUNTS OF DIAGNOSTIC TROUBLE CODE (DTC) SPN 2659 FMI 18 OR P0401 ONLY DURING NORMAL TO HIGH LOAD DRIVING CONDITIONS ON VEHICLES ASSEMBLED BETWEEN JANUARY 2010 AND DECEMBER 2013. IT HAS BEEN DETERMINED THAT DEPOSITS IN THE EGR COOLER CAN BUILD UP AND CAUSE HIGH RESTRICTION OVER TIME. THIS HIGH RESTRICTION PREVENTS THE REQUIRED AMOUNT OF EGR GAS FROM FLOWING THROUGH THE EGR COOLER CREATING DTC SPN 2659 FMI 18 OR P0401 EGR MASS FLOW RATE LOW TO BE LOGGED INTERMITTENTLY. NORMALLY, THIS IS ONLY REPORTED ON HIGHER MILEAGE VEHICLES.
FSB 371-040
ANTI-LOCK BRAKE SYSTEM (ABS) SENSOR CONNECTOR, REPLACEMENT. THE ANTI-LOCK BRAKE SYSTEM (ABS) SENSOR CONNECTOR ON SOME MACK TRUCKS BUILT BETWEEN 01/01/2013 AND 11/07/2014 MAY SHOW SIGNS OF CORROSION. CORROSION OF THE ABS SENSOR CONNECTOR CAN CAUSE ABS SENSOR FAULT CODES AND CAUSE THE ENGINE TO DE-RATE ON TRUCKS EQUIPPED WITH MDRIVE TRANSMISSIONS ONLY.
214-019
MACK TRUCKS: EXHAUST BRAKE ROCKER ARMS AND INJECTOR RETORQUE REQUIRES REPLACEMENT. ALL VEHICLES MODELS BETWEEN 09/2014-10/27/2014 SHOULD HAVE THESE PARTS CHANGED. *LJ
FSB 386-007
VEHICLE SPEED SENSOR. ON CERTAIN MACK TRUCKS BUILT FROM 5/7/2012 TO 11/07/2014 WITH THE M-DRIVE TRANSMISSION, THE VEHICLE SPEED SENSOR (VSS) MAY FAIL INTERNALLY. THIS IS DUE TO A MANUFACTURING DEFECT OF THE SENSOR. THIS FAILURE MAY CAUSE FAULT CODES RELATED TO ROAD SPEED. THIS FAILURE CAN CAUSE MULTIPLE SPN 84 FMI 19 FAULTS, BOTH ACTIVE AND INACTIVE, TO OCCUR AND MAY CAUSE THE MIL LIGHT TO COME ON IN THE DASH.
FSB 364-037
VEHICLE ELECTRONIC CONTROL UNIT (VECU), REPROGRAMMING, 5TH WHEEL SLIDE.
FSB 371-048
CAB HARNESS INSULATION, INSTALLATION. CAB WIRING HARNESS MAY EXPERIENCE CHAFING.
FSB593013
GRADE GRIPPER SOLENOID, REPLACEMENT. ON SOME MACK CHU, CXU, GU, AND TD TRUCK MODELS BUILT BETWEEN 04/31/2008 AND 05/12/2014, THE SOLENOID VALVE FOR THE GRADE GRIPPER FEATURE IS PRONE TO INTERNAL CONTAMINATION IN HARSH ENVIRONMENTS. THE INTERNAL CONTAMINATION OF THE SOLENOID VALVE IS CAUSED BY THE BUILDUP OF GRIME, SALT, ROAD DEBRIS AND OTHER SOLID CONTAMINANTS. IN SOME CASES, THE BUILD-UP OF SOLID CONTAMINANTS CAUSED THE SOLENOID VALVE TO MALFUNCTION. THE MALFUNCTION CAUSES THE TRAILER BRAKE CIRCUIT TO MAINTAIN TRAILER BRAKE PRESSURE AFTER A GRADE GRIPPER EVENT. REPLACEMENT OF THE EXISTING SOLENOID VALVE, ELBOW, AND THE ADDITION OF A NEW VENT WILL ENSURE PROPER FUNCTIONALITY OF THE GRADE GRIPPER FEATURE.
FSB-364-037
MACK: WHEN THE OUTPUT FROM THE VECU GETS SHORTED OUT TO GND, THERE IS NO WARNING AND CAUSES 5TH WHEEL TO SLIDE WITHOUT ACTIVATING 5TH WHEEL SLIDE SWITCH AND NEEDS TO BE REPROGRAM. MODEL 2010-2014 CHU, CXU, GU, TD. *PE
FSB 511-002
Brake Drum, Replacement (Steer Axle) Some MACK CHU, CXU, GU, and TD trucks built between 08/29/2011 and 06/30/2014, equipped with a MACK 14.6k steer axle, unitized hub, and 152 mm (6.0 in) wide Bendix brake shoes can show signs of brake shoe protrusion beyond the brake drum. This condition is resolved by installing new 152 mm (6.0 in) brake shoes, 178 mm (7.0 in) wide brake drums (20536276), new dust shields, and replace the existing Z-Brackets.
FSB 511-008
BRAKE DRUM, REPLACEMENT (STEER AXLE) SOME MACK CXU, CHU, GU, AND TD TRUCKS BUILT BETWEEN 08/29/2011 AND 06/30/2014, EQUIPPED WITH A MACK 14.6K STEER AXLE, UNITIZED HUB, AND 152 MM (6.0 IN) WIDE MERITOR BRAKE SHOES CAN SHOW SIGNS OF BRAKE SHOE PROTRUSION BEYOND THE BRAKE DRUM. THIS CONDITION IS RESOLVED BY INSTALLING NEW 152 MM (6.0 IN) BRAKE SHOES, NEW DUST SHIELDS, AND NEW 178 MM (7.0 IN) WIDE BRAKE DRUMS (20536276).
FSB 511-009
BRAKE DRUM, REPLACEMENT (STEER AXLE) SOME MACK CXU, CHU, GU, AND TD TRUCKS BUILT BETWEEN 08/29/2011 AND 06/30/2014, EQUIPPED WITH A MACK 14.6K STEER AXLE, UNITIZED HUB, AND 152 MM (6.0 IN) WIDE MERITOR BRAKE SHOES CAN SHOW SIGNS OF BRAKE SHOE PROTRUSION BEYOND THE BRAKE DRUM. THIS CONDITION IS RESOLVED BY INSTALLING NEW 152 MM (6.0 IN) BRAKE SHOES, NEW DUST SHIELDS, AND NEW 178 MM (7.0 IN) WIDE BRAKE DRUMS (20536276).
FSB-511-002
MACK: THE PROTRUSION OF BRAKE SHOES BEYOND BRAKE DRUM IS BEING REPLACED WITH NEW 152MM (6.0 IN) BRAKES SHOES, 178 MM (7.,0 IN) WIDE BRAKE DRUMS ON SOME TRUCKS. MODEL 2011-2014 CHU, CXU, GU, TD. *PE
FSB-511-009
MACK: BRAKE SHOES PROTRUDES BEYOND BRAKE DRUM AND CAN BE RESOLVED BY INSTALLING BRAKE SHOES 152MM (6.0 IN) AND WIDE BRAKE DRUMS 18MM (7.0 IN). MODEL 2011-2014 CHU, CXU, GU, TD. *PE
PI 0836
CRD 150/151 CARRIER INSPECTION COVER, REPLACEMENT, A MANUFACTURING DEFECT HAS BEEN IDENTIFIED AFFECTING CARRIERS BUILT FROM DECEMBER 2012 THROUGH JANUARY 2013. THE ISSUE IS MOLDING FLASH THAT MAY BE EXTENDING INTO THE O-RING GROOVE AT THE 12 AND 6 O'CLOCK POSITIONS OF THE COMPOSITE SIDE COVER. THIS FLASH MAY CUT INTO THE O-RING AND CAUSE IT TO DISTORT AND RESULTING IN OIL LEAKAGE. IT IS RECOMMENDED THAT THE COVER BE REPLACED TO CORRECT THIS CONDITION.
FSB-234-018
MACK TRUCK: TO INCREASED PROTECTION AGAINST FUEL INJECTOR TIP EROSION, A NEW FUEL TANK VENTILATION FILTER WAS IMPLEMENTED, AND MOUNTS ON OUTSIDE OF FRAME RAIL, USING FUEL TANK J BRACKET HUCK FASTENERS. MODEL CHU, CXU, GU, TD. *PE
FSB-234-019
MACK TRUCK: MOUNTED OUTSIDE OF FRAME RAIL, IS NEW FUEL TANK VENTILATION FILTER MOUNTING SLEEVE, USING FUEL TANK J BRACKET HUCK FASTENERS AND TO INCREASE PROTECTION AGAINST FUEL INJECTOR TIP EROSION. MODEL CHU, CXU, GU, TD. *PE
PI-0851
MACK TRUCK: MUST REPLACE, ON SOME TRUCKS, THE EGR COOLER COOLANT RETURN HOSE. *PE
FSB-593-013
MACK TRUCK: THE GRADE GRIPPER FEATURE, ON SOME TRUCKS, ARE PRONE TO HARSH ENVIRONMENTS WITH INTERNAL CONTAMINATION, CAUSED BY BUILD UP OF GRIME, SALT, ROAD DEBRIS AND OTHER CONTAMINANTS. MODEL CHU, CXU, GU, TD. *PE
FSB 722-002
INTERFERENCE BETWEEN THE BRAKE LINING AND THE SPRING CAP WAS DISCOVERED ON SOME MACK CHU, CXU, GU, TD, LEU, MRU TRUCKS EQUIPPED WITH 203 MM (8 IN) REAR DRUM BRAKES AND CAMELBACK REAR SUSPENSION.
FSB 371-047
POWER WIRES, REROUTING, CERTAIN MACK CHU, CXU, GU, AND TD TRUCK MODELS BUILT BETWEEN 01/01/07 AND 10/22/13, UTILIZES TWO (RED) POWER WIRES THAT ROUTE FROM THE BUSSED ELECTRICAL CENTER (BEC) AND BEHIND THE RADIO. THE (RED) POWER WIRES COULD POSSIBLY CHAFE ON THE RADIO BRACKET.
FSB 371-046
FRAME RAIL GROUND STUD, ON CERTAIN MACK TRUCKS BUILT FROM 01/01/2010 TO 10/7/2013 THE MAIN GROUND STUD, LOCATED ON THE FRAME RAIL BEHIND THE BATTERY BOX, MAY HAVE BEEN IMPROPERLY TORQUED. THIS IMPROPER TORQUE MAY HAVE ALLOWED CORROSION INHIBITOR TO GET BETWEEN THE RING TERMINALS WHICH MAY CAUSE MULTIPLE FAULT CODES AND/OR INTERMITTENT ISSUES.
FSB 284-048
SOME MACK VEHICLES WITH MP ENGINES BUILT BETWEEN JANUARY 2004 AND JANUARY 2013 MAY EXPERIENCE A MAIN OIL GALLERY PRESSURE SENSOR OR PISTON COOLING JET PRESSURE SENSOR FAILURE THAT LEADS TO OIL CONTAMINATION INTO THE ENGINE WIRE HARNESS.
PI 0826
ECM AND ACM SOFTWARE UPDATES, SOFTWARE UPDATES WITH ENHANCEMENTS ARE AVAILABLE FOR THE ENGINE CONTROL MODULE (ECM) AND AFTERTREATMENT CONTROL MODULE (ACM) FOR VEHICLES BUILT FROM THE START OF OBD2013 PRODUCTION TO MAY 29, 2013.
PI 0831
ECM AND ACM SOFTWARE UPDATES, SOFTWARE UPDATES WITH ENHANCEMENTS ARE AVAILABLE FOR THE ENGINE CONTROL MODULE (ECM) AND AFTERTREATMENT CONTROL MODULE (ACM) FOR VEHICLES BUILT FROM MAY 30, 2013 TO OCTOBER 4, 2013.
FSB 271-002
ON SOME MACK MODELS BUILT BETWEEN JANUARY 1, 2013 AND SEPTEMBER 13, 2013, MAY EXPERIENCE MULTIPLE COUNTS OF INACTIVE FAULTS: P113F-12, BUFFERED IDLE VALIDATION SWITCH WIRE VECU SIDE, CIRCUIT SHORT TO BATTERY. P113F-11, BUFFERED IDLE VALIDATION SWITCH WIRE VECU SIDE, CIRCUIT SHORT TO GROUND. THIS IS DUE TO A BUG IN THE SOFTWARE.
FSB 373-019
ON SOME MACK MODELS BUILT WITH AN ALLISON TRANSMISSION, BETWEEN MAY 16, 2011 AND AUGUST 9, 2013, MAY EXPERIENCE MULTIPLE OPEN CIRCUITS IN THE 31 WAY TRANSMISSION CONNECTOR. THIS IS DUE TO A SUPPLIER MANUFACTURING ISSUE WITH THE CONNECTOR.
FSB 221-011
DURING LONG HARD PULL CONDITIONS, DIAGNOSTIC TROUBLE CODES (DTCS) PID 100 FM1, SPN 100 FMI 1 OR P252400 CAN LOG ON CERTAIN MACK TITAN VEHICLES WITH MP10 ENGINES BUILT FROM JANUARY 2007 TO CURRENT PRODUCTION.
FSB 284-047
SOME MACK VEHICLES BUILT BETWEEN 2004 AND OCTOBER 2013 EXPERIENCE AN OIL LEVEL SENSOR FAILURE THAT LEADS TO OIL CONTAMINATION INTO THE ENGINE WIRE HARNESS.
PI 0829
THE AFTERTREATMENT SELECTIVE CATALYTIC REDUCTION (SCR) OUTLET PIPE BAND CLAMPS AND HEAT SHIELD FASTENER ON CERTAIN MACK VEHICLES BUILT BETWEEN JUNE 28, 2013 AND JULY 23, 2013 WERE NOT TORQUED CORRECTLY.
PI 0824
THE EGR COOLER OUTLET COOLANT HOSE ASSEMBLY MUST BE CHANGED ON ALL VEHICLES INVOLVED IN THIS CAMPAIGN.
FSB 364-031
TRIP RESET ERROR, VEHICLE ELECTRONIC CONTROL UNIT (VECU), REPROGRAMMING
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.