Vehicle report

2022 MAZDA MX-30

Compare every MAZDA MX-30 yearNHTSA and EPA records

Service bulletins

200 bulletins

Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.

SA-038-26a

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-038/26 06/15/26 DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote functions inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Index MAZDA CONNECT 2 Center Display Status Icon MAZDA CONNECT 3 Center Display Status Icon Remote Engine Start Will Not Function Remote Engine Start Function Will turn engine OFF Customer Subscription Status TCU Communication Line Status

SA-039-26a

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red text. SA-039/26 06/15/26 Mazda Connect Symptom Troubleshooting DESCRIPTION Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-053-26

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued bulletin(s) listed below. The changes are noted in Red text. SA-006/23 01/23/23 DESCRIPTION Some customers may complain about the infotainment system and/or the MyMazda App showing incorrect clock and/or tire pressures and/or tire pressure missing. This may be caused by: Incorrect calendar entry (month/day/year) after a battery disconnect Infotainment system software update. BCM TPMS unlearn during vehicle storage or transport. Wheel/Tire change REPAIR PROCEDURE This can be corrected by the customer driving the vehicle for a day or two so that the following will occur.

SA-042-26

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued SAs listed below. The changes are noted in Red text. SA-017/25 12/16/25, 09/08/25, 07/14/25, 05/15/25 and 03/21/25 DESCRIPTION Mazda Connect Frequently Asked Questions (FAQ) Index General Questions MAZDA CONNECT Indication Setup and Getting Started Dealer Processes Registration / Enrollment / Take-Over Customer Subscription Status WI-FI General Informatio Opening the TCU Communication Line WI-FI How-To Conditions for Remote Engine Start Will Not Function WI-FI Trial Period Conditions for Remote Engine Start Function Will turn engine OFF Interacting With The App TCU Communication Line Status Service Issues Educational Videos Troubleshooting Resources MyMazda App Error Codes Customer Opt-Out

SA-041-26

Service Bulletin/Repair Instructions

This SA supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-061/25 12/17/25 DESCRIPTION If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices. Examples: 1. Devices connected to the DLC-2 (battery discharge/DTC stored) 2. Devices plugged into the 12V outlet 3. GPS tracking device (engine no start/battery discharge) 4. Dash cam (DTC stored) 5. Non-certified USB cable (Apple Carplay™/ Android Auto™ will not connect) 6. Over-sized wheels/tires (incorrect GPS location) 7. DTC C0023:14 8. Decorative trim and/or cover on the START/STOP ENGINE button Example 1: Some electrical devices connected to the DLC-2 connector by insurance or mobile phone companies may cause: Battery discharge. The device may disrupt the CAN system battery saver mode. • IDS/MMDS will not communicate with the vehicle due to poor DLC-2 connection. The aftermarket device may cause DLC-2 female terminals to spread open.

SA-027-26a

Service Bulletin/Repair Instructions

This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-027/26 04/16/26 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings (excluding i-STOP batteries e.g. Q-85, S-95) molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. REPAIR PROCEDURE 1. Perform appropriate repair to vehicle. If needed, use the Battery Diagnostics of the DCA-8000 to test the charging and starting systems by following the on-screen instructions for entering the appropriate information. Refer to the Mazda DCA-8000 Instruction Manual for more information.

SA-0-38/26

Service Bulletin/Repair Instructions

DESCRIPTION Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Index MAZDA CONNECT 2 Center Display Status Icon MAZDA CONNECT 3 Center Display Status Icon Remote Engine Start Will Not Function Remote Engine Start Function Will turn engine OFF Customer Subscription Status TCU Communication Line Status

SA-039-26

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued SA listed below. The changes are noted in Red text. SA-012/25 10/06/25, 08/21/25, 05/15/25 and 02/27/25 DESCRIPTION Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE NOTE: Before proceeding: Document the vehicle's current MAZDA CONNECT CMU software version. • 2019-2022 Models - Go to TSB 16-003/23 and confirm the CMU Serial Number is not within the affected range. • Document customer device Brand/Model/Model Number/software version on the repair order. • Confirm that the Connectivity Master Unit (CMU) is updated to the latest software version. Go to MGSS -> Infotainment -> MAZDA CONNECT Updates ○ • If possible, complete the Microsoft Forms Questionnaire. Go to MGSS -> Infotainment -> MAZDA CONNECT Questionnaire.

SA-040-26

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued SA(s) listed below. The changes are noted in Red. SA-009/25 08/22/25 and 02/18/25 DESCRIPTION Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs. Index System Outline • MYMAZDA App Connected Vehicle (CV) Error Codes • Vehicle Confirmation Instructions • Troubleshooting Instructions • Resources

SA-034-26

Service Bulletin/Repair Instructions

This service alert supersedes the previously issued service alert listed below. The changes are noted in Red text. SA-047/25 10/07/25 DESCRIPTION When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated. CAUTION: DO NOT swap TCU with another vehicle as the TCU is VIN locked after activation. A TCU swap with another vehicle will disable Connected Services on both vehicles. • If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to the dealer for repairs. • If the Telematics Control Unit (TCU) replacement is necessary, check "Vehicle Communication Line Status Reference" status detail first. The TCU can only be replaced under the following "Status Detail" conditions: Open Completed (OK) ○ Closed Completed (OK) ○ ○ If the TCU is replaced under the following "Status Detail" conditions, the customer may not be able to enroll into the replacement TCU. Processing (NG) ○ Request Failed (NG) ○ Open Failed (NG) ○ Flag Setting Failed TCU Activation 1. Install the new TCU.

SA-031-26

Service Bulletin/Repair Instructions

DESCRIPTION Some vehicles may require the replacement of a damaged VIN plate or vehicle certification label. To obtain a replacement VIN plate (bulkhead-mounted and visible through the lower-left area of the windshield), contact DAG (Dealer Assistance Group) using VIN Plate Request Form available on One Mazda. To obtain a replacement vehicle certification label (located on the B􀀀pillar or front door), contact your assigned DSM (District Service Manager) to place the order. If DSM contact information is not available, refer to the Dealer & Field Contact Directory.

SA-029-26

Service Bulletin/Repair Instructions

This Service Alert supersedes the previously issued SA listed below: The changes are noted in Red. SA-011/24 02/12/24, 06/06/24, 07/29/24 DESCRIPTION Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers. SCHEDULED MAINTENANCE Refer to the applicable Workshop Manual or Owner's Manual for vehicle -specific manufacturer scheduled maintenance. Workshop Manual - Refer to section 00-00 SCHEDULED MAINTENANCE. Owner's Manual - Refer to section 8 Maintenance and Care. b. Note: Please refer to the information below outlining the services not included in Mazda's Factory Scheduled Maintenance: IMPORTANT: Recommending fluid flushes when not necessary can lead to customer confusion and dissatisfaction. Fluid flushing for preventive maintenance purposes is strongly discouraged, unless otherwise specified in a published procedure (Owner’s Manual, Workshop Manual, Technical Service Bulletin, etc.).

SA-027-26

Service Bulletin/Repair Instructions

This SA supersedes the previously issued bulletin(s) listed below. The changes are noted below in Red. SA-007/25 10/22/25, 06/02/25 and 02/03/25 DESCRIPTION The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings (excluding i-STOP batteries e.g. Q-85, S-95) molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps): CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery’s Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda DCA-8000, it will result in a false result and invalid Warranty Code from the tester. This will also result in unnecessary replacement of batteries. TEST PROCEDURE 1. Connect the charger clamps to the appropriate battery posts.

09-013-26

Service Bulletin/Repair Instructions

DESCRIPTION Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. Symptom 2: The touch sensor of the front door outer handle does not unlock the doors. Door outer handle touch sensor for locking (1) / unlocking (2) NOTE: If the concern occurs after specific operation as described below, refer to the TSB 09-046/22 (DOOR OUTER HANDLE TOUCH SENSOR DOES NOT LOCK AND UNLOCK AFTER A SPECIFIC OPERATION). 1. [MX-30] After using cabin preconditioning or hazard warning lights for approx.15 minutes. 2. [MAZDA3 and CX-30] After using hazard warning lights for approx. 15 minutes. 3. [MAZDA3, CX-30 and MX-30] When both touch sensors are touched at once. Cause 1 (for Symptom 1): Water may accumulate around the touch sensor in the outer handle, resulting in temporary lower sensitivity of the capacitive sensor. Also, if car wash foam gets inside the outer handle while washing the vehicle, the foam may disturb the touch sensor detection. Mazda is still working on a mass production change for this concern. Cause 2 (for Symptom 2): Improper soldering in the production process may disturb the touch sensor detection. To eliminate this concern, the production process has been modified. Customers having this concern should have their vehicle repaired using the following repair procedure. REPAIR PROCEDURE 1. Verify customer concern. 2. Repair the vehicle depending on the experienced symptom(s). Symptom 1: Follow the "Procedure to waterproof a touch sensor” below to make the touch sensor waterproof. Symptom 2: Replace the front outer handle with a modified one according to the instructions on MGSS. Mazda3 (FRONT OUTER HANDLE REMOVAL/INSTALLATION) CX-30 (FRONT OUTER HANDLE REMOVAL/INSTALLATION) MX-30 (FRONT OUTER HANDLE REMOVAL/INSTALLATION) If both symptoms are experienced: Replace the front outer handle with a modified one and follow the “Procedure to waterproof a touch sensor” below to make the touch sensor waterproof. NOTE: DO NOT repair the other front outer handle for the vehicle if it is not experiencing any problems. 3. Verify the repair by checking if the new outer handle locks/unlocks the door correctly.

SA-005-26

Service Bulletin/Repair Instructions

There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method • B. Auxiliary Key Code Cut Method 2019 and newer models require a 10-digit key code to accurately cut keys • 5-digit codes CANNOT be provided for 2019 and newer vehicles (the traditional 5-digit code from the key tag or driver's door lock cylinder is not sufficient and will not be issued for key cutting on these models). • Only Mazda-approved key cutting machines can process these 10-digit codes. • Many older key machines do not support 10-digit codes and cannot be updated to do so. In these cases, dealers will need to purchase one of the newer Mazda-approved key cutting machines capable of handling this requirement. • For a list of current Mazda-approved machines and purchasing options, refer to the Mazda Dealer Equipment Program or view the current Mazda approved key machines below.

09-001-26

Service Bulletin/Repair Instructions

There are wrinkles on the leather seat cushion and/or seat back surface at PDI, when new vehicle is delivered, or when new upholstery is installed under Warranty repair. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. Wrinkles may not be completely removed after the repair is completed. Leather is a natural material and may develop some wrinkles due to aging and wear during normal usage.

SA-001-26

Service Bulletin/Repair Instructions

Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.

04-003-25a

Service Bulletin/Repair Instructions

Some vehicles may experience premature wear of the front inner brake pads. The pads wear down by about 0.1 in (3 mm) every 6200 miles (10,000 km), and may require replacement at less than 12,400 miles (20,000 km). This is caused by intrusion of dirt and sand into the gap between the pad and the rotor. To eliminate this concern, the shape of the dust cover has been changed, and the brake pad chamfer shape has been revised.

SA-017-25d

Service Bulletin/Repair Instructions

Mazda Connect Services - Frequently Asked Questions (FAQ)

SA-061-25

Service Bulletin/Repair Instructions

If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.

SA-023-25c

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop • Door Lock / Unlock • Lights ON / OFF • Climate Control • 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ". Page

09-045-25

Service Bulletin/Repair Instructions

Some customers may experience that the fuel lid and charge lid do not lock or unlock during door lock/unlock operation. This is caused by: Improper dimensional accuracy of the lid actuator lock mechanism Incomplete control logic in the R-ESU software To eliminate this concern: The mold design of the lid actuator was modified. The control software of the R-ESU was revised.

SA-055-25

Service Bulletin/Repair Instructions

Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern. NOTE: Before following this Service Alert repair procedure, ensure published TSBs in MGSS have been completed per model year.

SA-051-25

Service Bulletin/Repair Instructions

Noise, Vibration, and Harshness (NVH) Diagnostic Guidelines Diagnostic Guidelines When diagnosing NVH concerns, it is essential to first classify the issue into one of three primary categories: Noise, Vibration, or Harshness. Many customer complaints may involve overlapping symptoms, such as both noise and vibration, so identifying the dominant characteristic is critical. Once the primary symptom is determined, follow the appropriate diagnostic path. For example, if a concern includes both noise and vibration but is related to vehicle speed, the vibration diagnostic path should be followed. When considering component replacement during the diagnostic process, it is best practice to start with the lowest cost or most accessible part unless diagnostic evidence clearly identifies a more expensive or complex component as the root cause. This approach helps minimize repair costs and avoids unnecessary part replacements. For example, a growling or bearing whine noise may be mistakenly attributed to internal components in the differential, transfer unit, or transmission, when the actual source is a wheel bearing. Misdiagnosis like this can lead to unnecessary repairs, added time and cost. To help prevent this, always follow the guidelines in the repair procedure.

SA-007-25b

Service Bulletin/Repair Instructions

The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings (excluding i-STOP batteries e.g. Q-85, S-95) molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery.

SA-047-25

Service Bulletin/Repair Instructions

SA-012-25c

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

04-003-25

Service Bulletin/Repair Instructions

30-002-25

Service Bulletin/Repair Instructions

Some vehicles may exhibit sparks when the charging cable is connected or disconnected during AC charging. Removing the charging cable while it is energized can cause sparks because the air’s insulation breaks down. To eliminate this concern, the control logic of the PCM has been modified to temporarily stop AC charging upon a door unlock trigger.

SA-044-25

Service Bulletin/Repair Instructions

For improvement of electrical diagnosis, the SKYACTIV® Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV® vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.

SA-042-25

Service Bulletin/Repair Instructions

SA-043-25

Service Bulletin/Repair Instructions

Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles] B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen 7 vehicles built on or before March 2, 2019] No DTC - Warning Message only [Gen 7 vehicles built after March 2, 2019] DTC C1001:92 or B14F0:92 set as a past record for low visibility of the Forward Sensing Camera (FSC). It does not mean there is an actual FSC defect. In some cases the customer may have a concern with the Lane Departure Warning System (LDWS) and/or High Beam Control system (HBC). In other cases this DTC might be found without a related customer concern.

SA-017-25c

Service Bulletin/Repair Instructions

Mazda Connected Services - Frequently Asked Questions

SA-009-25a

Service Bulletin/Repair Instructions

Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.

SA-023-25b

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-039/25

Service Bulletin/Repair Instructions

Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection. If a structure's windows create enough of a curve, the concave glass can focus the sun's rays onto a small area and acting like magnifiying glass direct the sunbeams into a hot pinpoint of light. This magnifcation of the sun's rays can cause damage to vehicle trim (see examples). Additional information and exemplar images regarding this phenomenon can be found by performing a google search.

SA-012-25b

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-038-25

Service Bulletin/Repair Instructions

When replacing the MAZDA CONNECT remote tuner (RT) with a replacement tuner for any reason, a call must be made to inform SiriusXM of the existing Radio ID and the new/replacement SAT Radio ID as soon as possible to ensure the customer leaves the dealership with an active SAT radio.

SA-035-25

Service Bulletin/Repair Instructions

Some vehicles may show “TSR system performance is reduced. Navigation Data Unavailable" or "Check Navigation SD Card" in the meter while driving.

09-029-25

Service Bulletin/Repair Instructions

Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process and the fan motor bearing may become worn out during use. To eliminate this concern, the fan motor has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).

SA-017-25b

Service Bulletin/Repair Instructions

Mazda Connected Services - Frequently Asked Questions (FAQ)

SA-023-25a

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

09-026-25

Service Bulletin/Repair Instructions

Some customers may complain that the parking sensor alarm fails to sound until the vehicle is extremely close to an obstacle. This is due to improper PAU (Parking Assist Unit) control software. To eliminate this concern, the PAU control software has been modified.

SA-032-25

Service Bulletin/Repair Instructions

Some customers may complain about a noisy HVAC blower motor or odor after a cabin air filter replacement. Foreign debris on the blower motor after servicing the cabin air filter may be the cause. During the removal of the cabin air filter, foreign debris (leaves, dust, dirt....ect.) may fall on the blower motor causing a fluttering type noise or odor.

SA-031-25

Service Bulletin/Repair Instructions

Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.

SA-007-25a

Service Bulletin/Repair Instructions

The Mazda DCA-8000 is required for all warranty battery testing. If the Mazda DCA-8000 is not used, incorrect battery testing may result in unnecessary battery replacement. Use the following test procedures in this Service Bulletin to test Mazda vehicle batteries and to generate a Warranty Code. NOTE: A Warranty Code is required for warranty claim submission Battery Identification (Mazda batteries have 2 rating types) 1. JIS (Japanese Industrial Standard): JIS codes are six-digit alpha-numeric markings molded into the top of the battery to identify a battery by the capacity (amps), dimensions, and battery terminal type. Vehicles manufactured in Japan come from the factory with a JIS rated battery. NOTE: Replacement batteries may use a CCA rating. If so, use the CCA rating listed on the battery. 2. CCA (Cold Cranking Amps): CCA ratings are normally located on a sticker affixed to the top of the battery to indicate a battery’s Cold Cranking Amps. CCA rated batteries are supplied with domestically produced vehicles. NOTE: If an incorrect CCA rating is entered into the Mazda DCA-8000, it will result

SA-029-25

Service Bulletin/Repair Instructions

This service information provides testing and charging procedures in order to promote proper battery maintenance, to deliver new vehicles with fully charged batteries, and to reduce unnecessary battery replacement cost. For new vehicles in stock at the dealer, inspect and maintain the batteries periodically according to the repair procedure.

SA-012-25a

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-017-25a

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ) for Mazda Connected Services.

SA-023-25

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-025-25

Service Bulletin/Repair Instructions

Some vehicles may exhibit wiper blade contact with the A-pillar trim, with or without a chattering noise. This condition may be caused by worn or contaminated wiper blades. It can also be caused by bent wiper arms, or loose wiper arm retaining nuts due to improper handling. Improper handling occurs when pulling on or forcing the wiper arms. Technicians should be aware that while replacement of the wiper blade may resolve some cases, correction of bent components or repositioning of the wiper arms, particularly when the retaining nut is loose, requires additional steps to ensure proper alignment and function.

SA-017-25

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ)

09-013-25

Service Bulletin/Repair Instructions

Some CX-5 and CX-30 customers may find that the liftgate does not close when pressing the power liftgate (PLG) rear switch (A) located on the interior liftgate trim. This may be caused by PLG switch corrosion. Water from a high pressure car washer and/or condensation may drip onto the switch connector and cause corrosion. To eliminate this concern, the PLG rear switch has been modified with a waterproof connector.

SA-012-25

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-009-25

Service Bulletin/Repair Instructions

Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.

15-001-25

Service Bulletin/Repair Instructions

Some vehicle may experience the i-ACTIVSENSE/ALH warning lights on and a system error messages may be found in the center display as well. DTC U3000:04 (FSC) is stored in memory • DTC U3000:04 (FSC) - Forward sensing camera (FSC) internal malfunction • This may be caused by a hardware failure in an internal device of the FSC that results in the malfunction detection. To eliminate this concern, the production process of the FSC has been modified.

SA-004-25a

Service Bulletin/Repair Instructions

Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life and the following will occur: The engine will not start unless the key transmitter is held over the Start Stop button. • Outside door handle lock/unlock touch sensor is inoperative. • Key transmitter indicator lights are inoperative. • The following DTC's may be stored: DTC B13D3:94 (Communication error with remote transmitter) ○ DTC P1260:00 (Immobilizer system problem).

SA-007-25

Service Bulletin/Repair Instructions

09-006-25

Service Bulletin/Repair Instructions

Some customers may notice the front door window(s) do not open. This may be caused by the lower window cable corrosion and damage. To eliminate this concern, the following improvements have been made: The shape of the power window regulator pulley has been modified to prevent cable damage. The shape of the carrier plate has been modified to prevent the cable from being exposed to water/moisture.

SA-005-25

Service Bulletin/Repair Instructions

Before judging a steering wheel as having premature wear or a defect, first clean the steering wheel as explained in the repair information. Some vehicles may have steering wheel stains caused by chemicals such as hand lotions.

SA-004-25

Service Bulletin/Repair Instructions

Key Transmitter Power Saving Function: When the key transmitter Power Saving Function is turned ON, transmitter battery power consumption is restricted, thereby extending the transmitter battery life. NOTE: Some customers may complain about an engine no start. This may be caused by the customer inadvertently putting the key transmitter in Power Saving Function.

SA-003-25

Service Bulletin/Repair Instructions

When performing the MGSS Workshop Manual 360° View Monitor System Aiming Procedure, M-MDS may show error message "Procedure unsuccessful". This may be caused by light glare on the SST.

09-003-25

Service Bulletin/Repair Instructions

Some customers may experience that the out-of-area (reception area) type auto lock function sometimes fails. When the front door is being closed with a hand touching one or both of the touch sensors on the front outer handle, the out-of-area (reception area) type auto lock function may fail. Control software of the LF control unit (LFU) has been modified.

SA-009-24e

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ)

SA-017-24c

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF Climate Control 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-081-24

Service Bulletin/Repair Instructions

Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.

SA-070-24a

Service Bulletin/Repair Instructions

SA-031-24a

Service Bulletin/Repair Instructions

SA-016-24c

Service Bulletin/Repair Instructions

SA-007-24b

Service Bulletin/Repair Instructions

This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle.

09-001-24g

Service Bulletin/Repair Instructions

Some customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:00-TCU (Emergency call unit/telematics communication unit internal malfunction) or U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.

SA-009-24d

Service Bulletin/Repair Instructions

Mazda Connect Services - Frequently Asked Questions (FAQ)

SA-064-24

Service Bulletin/Repair Instructions

Some customers may experience a Connected Vehicle failure. The MyMazda App may display an Error Code. This document provides Error Code description and recovery information to assist with repairs.

SA-070-24

Service Bulletin/Repair Instructions

SA-068-24

Service Bulletin/Repair Instructions

Some customers may complain about scratches on the instrument cluster lens.

04-001-24b

Service Bulletin/Repair Instructions

Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. The brake pad has insufficient disc-rust prevention performance, resulting in the disc plate rusting. To eliminate this concern, the pad material has been improved to prevent rust on the disc surface. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disc pad surface fluctuating. To eliminate this concern, the brake pads have been modified.

SA-006-24c

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-009-24c

Service Bulletin/Repair Instructions

Mazda Connect Services - Frequently Asked Questions (FAQ)

SA-017-24b

Service Bulletin/Repair Instructions

SA-065-24

Service Bulletin/Repair Instructions

Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.

SA-066-24

Service Bulletin/Repair Instructions

Some customers may complain that the MyMazda App Remote Engine Start function fails. MX-30 and PHEV vehicles do not have a Remote Engine Start function; instead, they are equipped with the following remote functions: Start / Stop Charge Climate On / Off

04-001-24a

Service Bulletin/Repair Instructions

SA-062-24

Service Bulletin/Repair Instructions

SA-016-24b

Service Bulletin/Repair Instructions

SA-057-24

Service Bulletin/Repair Instructions

SA-058-24

Service Bulletin/Repair Instructions

Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.

SA-060-24

Service Bulletin/Repair Instructions

SA-056-24

Service Bulletin/Repair Instructions

Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.

SA-053-24

Service Bulletin/Repair Instructions

Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method

SA-006-24b

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-011-24b

Service Bulletin/Repair Instructions

Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.

SA-047-24

Service Bulletin/Repair Instructions

Some customers may report that the charge lid (door) on the vehicle was stuck closed and would not open to charge the vehicle. The charge lid may or may not be missing.

09-036-24

Service Bulletin/Repair Instructions

At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface. NOTE: This repair is not a permanent fix, it is meant to make new seats look their best when the vehicle is first presented to the customer. • Wrinkles may not be completely removed after the repair is completed. • Leather is a natural material and may develop some wrinkles due to aging and wear during normal useage.

09-001-24e

Service Bulletin/Repair Instructions

Some customers may experience a “Telematics Malfunction” message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.

SA-009-24b

Other

Mazda Connected Services - Frequently Asked Questions (FAQ)

09-001-24d

Service Bulletin/Repair Instructions

SA-038-24

Other

Some customers may experience the master warning light and/or the "In-Vehicle Network Malfunction" warning message in the instrument cluster on with DTC B119F:01 (TCU - Tel antenna No. 1 malfunction) stored.

09-030-24

Service Bulletin/Repair Instructions

Some customers may experience the following symptoms: No sound from some audio sources (AM, FM, SiriusXM®) after turning the ignition on. Radio station selection (AM, FM, SiriusXM®) changes unintentionally after turning the ignition on. Audio source cannot be changed. Diagnosing according to MGSS online does not solve the problem. These concerns may be caused by the remote tuner not operating properly under certain situations. To eliminate these concerns, the remote tuner control software has been modified.

SA-011-24a

Other

SA-016-24a

Other

SA-022-24a

Other

Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.

07-003-24a

Service Bulletin/Repair Instructions

Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 °F (10 °C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.

SA-036-24

Other

Some customers may complain about color discrepancies (brightness differences) of the image displayed on the screen when using the 360°view monitor. As this phenomenon is not a system failure, do not make any repairs or replace any parts. Explain the cause of this occurrence to the customer as follows: The 360°view monitor is a system that provides a complete picture of the vehicle surroundings by combining the pictures captured by 4 separate cameras. These cameras are installed in the front, rear, right and left sides of the vehicle. Each camera has a color adjustment function (white balance) that operates independently from each other, which can result in color discrepancy when the combined picture is displayed on the screen. This is especially true when one of the cameras captures more green objects than the remaining cameras.

SA-031-24

Other

SA-032-24

Other

09-001-24c

Service Bulletin/Repair Instructions

Some customers may experience a âTelematics Malfunctionâ message in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored in memory. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified.

04-002-24

Service Bulletin/Repair Instructions

Some vehicles may exhibit the initial setup of the Electric Parking Lock (EPL) does not complete and is indicated as 'incomplete' when performing the initial setup of the EPL. This is caused by the initial learning program of the EPL not setting properly. To eliminate this concern, the control software of the EPL has been modified.

07-003-24

Service Bulletin/Repair Instructions

Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 Â°F (10 Â°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.

09-023-24

Service Bulletin/Repair Instructions

Some customers may experience one or both of the following symptoms while locking and unlocking the doors works fine using the remote transmitter. Symptom 1: The touch sensor of the front door outer handle does not lock the doors after rain and/or car washing, even though unlocking is possible. Symptom 2: The touch sensor of the front door outer handle does not unlock the doors.

SA-017-24a

Service Bulletin/Repair Instructions

SA-022-24

Service Bulletin/Repair Instructions

SA-007-24a

Service Bulletin/Repair Instructions

09-020-24

Service Bulletin/Repair Instructions

Some customers may experience that, with a specific operation, the touch sensor of front door outer handle does not lock and unlock the doors but the remote transmitter operates correctly. Description of the specific operations: Specific Operation 1 [MX-30]: After using cabin preconditioning or hazard warning lights for approx.15 minutes. Specific Operation 2 [MAZDA3 and CX-30]: After using hazard warning lights for approx. 15 minutes. Specific Operation 3 [MAZDA3, CX-30 and MX-30]: When both touch sensors are touched at once. Specific Operation 1 and 2 Cause: The touch sensor has been disabled to avoid the unintended locking/unlocking operation caused by rain. Specific Operation 3 Cause: The control logic is not appropriate. NOTE: If the concern occurs without the specific operation above, refer to TSB 09-019/22 (DOOR OUTER HANDLE TOUCH SENSOR DOES NOT LOCK AND/OR UNLOCK). To correct this issue, the control software of the LF control unit (LFU) has been modified.

09-017-24

Service Bulletin/Repair Instructions

Some vehicles may exhibit a rattle noise near the driverâs and/or passengerâs head rests at the B-pillar area while driving on rough roads. This is caused by an interference between the rear end of the front door glass run-channel and the front end of rear sash molding.

09-001-24b

Service Bulletin/Repair Instructions

SA-017-24

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, Climate control

SA-016-24

Service Bulletin/Repair Instructions

PF-24-03

Service Bulletin/Repair Instructions

Due to limitations, certain vehicles from 2016 to current models might display an inaccurate transmission part number in the Global Electronic Parts Catalog (GEPC). To provide support in such cases, a temporary lookup guide has been developed for assistance.

09-014-24

Service Bulletin/Repair Instructions

When encountering a vehicle with paint damage, refer to the "Mazda Paint Warranty Guide" to determine cause, prevention, remedy, and warranty coverage (if applicable).

04-001-24

Service Bulletin/Repair Instructions

Symptom 1: Some customers may complain about hearing a grinding noise and/or vibration occur when applying the brake. This is due to rust on the rear brake disc plate. Symptom 2: Some vehicles may exhibit a squeal noise from the rear brakes when braking lightly while driving at a slow speed. The squeal noise is caused by the disk pad surface fluctuating.

SA-009-24a

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ): General Questions, Reception Level Inspection, Setup and Getting Started, Dealer Processes, Registration / Enrollment, TCU Activation, WI-FI General Information, Conditions for Remote Engine Start Will Not Function, WI-FI How-To Conditions for Remote Engine Start Function Will turn engine OFF, WI-FI Trial Period, Deactivation Mode, Interacting With The App, Educational Videos, Service Issues, Resources, Troubleshooting Page.

SA-013-24

Service Bulletin/Repair Instructions

Some vehicles may exhibit a steering shimmy or body vibration during the PDI test drive or during the first few miles of driving after the vehicle has been delivered to the customer due to flat spots on the tires. Flat spots on tires may be caused by improper maintenance during dealer storage (e.g.: Vehicle was left stationary for a prolonged period of time in high ambient temperatures).

SA-014-24

Service Bulletin/Repair Instructions

Some customers may complain that the tire sidewalls are distorted or "damaged". Sidewall waviness/indentations/undulations are common on radial tires and are more noticeable on tires with taller sidewalls. The higher the tire pressure, the more noticeable the effect will be. Be sure to set the tire pressures at the recommended tire pressure on the vehicle tire label. Sidewall indentations are a cosmetic condition that does not affect the performance of the tires.

09-001-24a

Service Bulletin/Repair Instructions

SA-011-24

Service Bulletin/Repair Instructions

SA-009-24

Service Bulletin/Repair Instructions

SA-007-24

Service Bulletin/Repair Instructions

NOTE: Before proceeding, perform MGSS Vehicle Inquiry (MGSS -> Other Applications -> Warranty Veh. Inq. -> RECALLS / SPECIAL SERVICE PROGRAMS -> Status) and check for Open campaigns. If any of the following campaigns are open, complete the campaign before proceeding with this service information. SSPC5 - 2019-2021 MAZDA3 AND 2020-2021 CX-30 - CONTROL UNITS REPROGRAMMING 4219L - 2019MY MAZDA3 SUDDEN DECELERATION FROM FALSE BRAKE ACTIVATION 2024 CX-90 with VINS lower than JM2KK******151673 (produced before November 25, 2023), VCM software update available using TSB 15-001/24. DESCRIPTION This information will give you the necessary knowledge to respond to customers concerns of Smart Brake Support (SBS) unintended braking. By educating the customer on the system operation, it should reduce their anxiety or distrust of the vehicle. IMPORTANT: Humans recognize an object with their eyes and decide whether or not to apply the brakes using their brain. The vehicle recognizes objects using the Forward Sensing Camera (FSC) and Front Radar sensor (FR), to determine brake application. Therefore, drivers may feel that the operation does not match the human feeling.

SA-006-24

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

09-001-23a

Service Bulletin/Repair Instructions

Some vehicles may exhibit an âIn Vehicle Network Malfunctionâ message appearing in the instrument cluster with DTC U3000:04-TCU (Telematics communication unit internal malfunction) stored after the connected service contract has been discontinued. This is caused by improper control software of the telematics communication unit (TCU). To eliminate this concern, the control software of the TCU has been modified

09-039-23a

Service Bulletin/Repair Instructions

Some customers may experience no sound from the audio system and/or the audio source cannot be changed. This concern may be caused by the remote tuner not operating properly under certain situations. To eliminate this concern, the remote tuner control software has been modified.

SA-082-23

Service Bulletin/Repair Instructions

SA-015-23e

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ): General Questions Reception Level Inspection Setup and Getting Started Dealer Processes Registration / Enrollment TCU Activation WI-FI General Informatio Conditions for Remote Engine Start Will Not Function WI-FI How-To Conditions for Remote Engine Start Function Will turn engine OFF WI-FI Trial Period Deactivation Mode Interacting With The App Educational Videos Service Issues Resources Troubleshooting Page

SA-025-23a

Service Bulletin/Repair Instructions

When the Telematics Control Unit (TCU) replacement is necessary due to a failure, use MDARS to activate the new TCU after replacement. Use the information in this service alert to initialize the new TCU until the procedure on MGSS is updated.. CAUTION: DO NOT swap TCU with another vehicle as the TCU is VIN locked after activation. A TCU swap with another vehicle will disable Connected Services on both vehicles. If TCU activation is not performed, connected vehicle functions will not operate. This will have a negative impact on the customer because they will need to return to the dealer for repairs.

SA-079-23

Service Bulletin/Repair Instructions

Some customers may complain about color discrepancies (brightness differences) of the image displayed on the screen when using the 360Â°view monitor. As this phenomenon is not a system failure, do not make any repairs or replace any parts.

09-007-23c

Service Bulletin/Repair Instructions

At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.

SA-077-23

Service Bulletin/Repair Instructions

09-039-23

Service Bulletin/Repair Instructions

SA-027-23c

Service Bulletin/Repair Instructions

In-Vehicle Network Malfunction error message and Master Warning light ON with DTC U3000:04 (Telematics communication unit internal malfunction) stored.

09-029-23a

Service Bulletin/Repair Instructions

01-007-23a

Service Bulletin/Repair Instructions

SA-072-23

Service Bulletin/Repair Instructions

Some customers may report a dent at the side or rear of the front seat. This is caused by the seat belt buckle resting against the seat.

SA-009-23i

Service Bulletin/Repair Instructions

02-001-23a

Service Bulletin/Repair Instructions

Some customers may complain that oil leaks from the rear shock absorber. Due to the structure, a small amount of oil is leaked out, but there is no functional concern. However, this oil leak level is almost the same where shock absorber replacement is required. To eliminate this concern, the structure of the oil seal in the rear shock absorber has been modified

SA-032-23a

Service Bulletin/Repair Instructions

09-015-23c

Service Bulletin/Repair Instructions

Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).

SA-042-23a

Service Bulletin/Repair Instructions

Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.

SA-053-23

Service Bulletin/Repair Instructions

Some customers may report that the charge lid (door) on the vehicle was stuck closed and would not open to charge the vehicle. The charge lid may or may not be missing.

04-002-23c

Service Bulletin/Repair Instructions

SA-003-23a

Service Bulletin/Repair Instructions

PF-23-09

Service Bulletin/Repair Instructions

MNAO has recently found an increase in non-returned cores within the United Radio (UR) exchange program. As a reminder, dealers have 90 days, after the order is placed, to return the exchanged part. Failure to return the exchanged part will result in a debit of the full component price. It is highly recommended to set a calendar reminder at the time of the order for no more than 60 days to ensure all orders are returned if repaired and if not repaired, contact the customer to cancel the order and return the unit.

SA-039-23a

Service Bulletin/Repair Instructions

Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.

09-015-23b

Service Bulletin/Repair Instructions

Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).

SA-009-23h

Service Bulletin/Repair Instructions

SA-038-23a

Service Bulletin/Repair Instructions

SA-050-23

Service Bulletin/Repair Instructions

Some customers may complain about scratches on the instrument cluster lens.

SA-009-23g

Service Bulletin/Repair Instructions

09-015-23a

Service Bulletin/Repair Instructions

Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified. NOTE: It is normal for some noise to occur within the first few seconds after starting the engine, when the front combination lights perform a self check (sweep).

SA-042-23

Service Bulletin/Repair Instructions

Some customers may complain about the Active Driving Display not displaying turn by turn (TBT) travel direction or navigation information.

30-002-23

Service Bulletin/Repair Instructions

Some customers may complain that the electric motor sound (also known as EV sound) is not heard. NOTE: The EV sound is provided for the driver to inform the vehicleÃ¢ÂÂs behavior, such as level and changes of motor torque, by an electronically generated sound through the audio system, instead of an engine sound.

SA-027-23b

Service Bulletin/Repair Instructions

Some customers may experience the following: In-Vehicle Network Malfunction error message, Master Warning light ON, Connected Vehicle Reception Icon shows "X".

09-029-23

Service Bulletin/Repair Instructions

09-028-23

Service Bulletin/Repair Instructions

SA-039-23

Service Bulletin/Repair Instructions

Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.

SA-009-23F

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

09-026-23

Service Bulletin/Repair Instructions

Some vehicles may exhibit the warning message "Ultrasonic Sensor Malfunction" in the instrument cluster and the following DTC(s) stored after replacing the front and/or rear ultrasonic sensor(s) during body or paint repair.

SA-015-23d

Service Bulletin/Repair Instructions

Connected Services, Frequently Asked Questions (FAQ)

16-005-23

Service Bulletin/Repair Instructions

Some vehicles may experience the symptoms mentioned below, which can be fixed with the latest software update (Version 7000C0A-NA02_11046). Ver. 7000C0A-NA02_11046 fixes these software errors (bugs): Ã¢ÂÂ¢ The system does not resume the play list after editing a play list for an USB audio device. Ã¢ÂÂ¢ The screen does not show proper picture when receiving SiriusXM data. Ver. 7000C0A-NA02_11044 fixes these software errors (bugs): Ã¢ÂÂ¢ Beep sounds every couple of minutes. Ã¢ÂÂ¢ Language setting may not be accepted correctly. Ã¢ÂÂ¢ When refusing the incoming call while playing audio tracks using the Apple CarPlay, the screen shows Ã¢ÂÂPhone in useÃ¢ÂÂ message and it stops playing audio tracks. Ã¢ÂÂ¢ The audio track may not pause when pressing the mute button. Ã¢ÂÂ¢ The screen freezes when smartphone receives messages under BluetoothÃÂ® connection. Ver. 7000C0A-NA02_11036 fixes these software errors (bugs): Ã¢ÂÂ¢ Screen freezes and goes to white screen, then the system reboots. Ã¢ÂÂ¢ Cannot control the audio system with steering switches and command switch. Ã¢ÂÂ¢ If another incoming call comes in immediately after the hands-free call is ended, the call is automatically accepted. Ã¢ÂÂ¢ Establishing BluetoothÃÂ® connection takes tiime. Ã¢ÂÂ¢ DTC U3000:49 is stored which may be accompanied with following symptoms. -No sound comes out from the speakers. -Audio source selection is unavailable. Ã¢ÂÂ¢ The vehicle icon rotates when using the navigation with "head-up" mode.

SA-038-23

Service Bulletin/Repair Instructions

SA-008-23a

Service Bulletin/Repair Instructions

SA-027-23a

Service Bulletin/Repair Instructions

IN-VEHICLE NETWORK MALFUNCTION AND MASTER WARNING LIGHT ON. DTC U3000:04 STORED (DOES NOT APPLY TO 09-001/23)

09-024-23

Service Bulletin/Repair Instructions

SA-009-23e

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-036-23

Service Bulletin/Repair Instructions

09-007-23b

Service Bulletin/Repair Instructions

At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.

SA-005-23a

Service Bulletin/Repair Instructions

Customers having MAZDA CONNECT concerns should have their vehicle repaired using the following repair procedure.

SA-009-23d

Service Bulletin/Repair Instructions

Some customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF, 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-015-23c

Service Bulletin/Repair Instructions

Frequently Asked Questions (FAQ)

SA-032-23

Service Bulletin/Repair Instructions

16-003-23

Service Bulletin/Repair Instructions

Some customers may complain that Mazda Connect does not start (blank screen) or that it takes a long time to restart/ reboot after starting the vehicle. This is caused by the initialization process with the CMU failing at startup due to a defective circuit board element. To eliminate this concern, the internal hardware (DRAM) of the CMU has been improved.

SA-031-23

Service Bulletin/Repair Instructions

01-007-23

Service Bulletin/Repair Instructions

30-001-23

Service Bulletin/Repair Instructions

Some customers may complain that the quick charging does not start or stops immediately when using specific charging points. This may caused by the onboard charger not being compatible with some brand chargers. NOTE: For reference, Ã¢ÂÂEVTronic," and "AlpitronicÃ¢ÂÂ brands are reported as the inapplicable type of DC charger at this moment. To eliminate this concern, the control software of the onboard charger has been modified.

SA-015-23b

Service Bulletin/Repair Instructions

Mazda Connected Services - Frequently Asked Questions (FQA)

SA-027-23

Service Bulletin/Repair Instructions

In-Vehicle Network Malfunction error message. DTC U3000:04 (Telematics communication unit internal malfunction) stored. NOTE: The vehicle does not apply to 09-001/23 because CSP04 is not "OPEN".

SA-009-23c

Service Bulletin/Repair Instructions

Some customers may complain about any of the following:1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative.Engine Start / Stop,Door Lock / Unlock,Lights ON / OFF. 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-025-23

Service Bulletin/Repair Instructions

15-001-23

Service Bulletin/Repair Instructions

Some vehicles may exhibit the warning messages Safety and Driver Support Systems Temporarily Disabled or Front Radar Obscured. Drive Safely displayed in the instrument cluster despite no dirt on the front radar sensor while driving in specific locations as follows:

SA-022-23

Service Bulletin/Repair Instructions

Some customers may complain about an intermittent Beep sound (popping sound) every 1-2 minutes while driving. This may be cause by a software error in the navigation SD card.

SA-018-23a

Service Bulletin/Repair Instructions

09-007-23a

Service Bulletin/Repair Instructions

At PDI or when new vehicle is delivered, some customers may complain about wrinkles on the leather seat cushion and/or seat back surface.

SA-009-23b

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: 1. Infotainment Center Display does not provide the Authorization Code (OTP) during the MyMazda App Connected Vehicle enrollment. 2. Remote function(s) inoperative. Engine Start / Stop Door Lock / Unlock Lights ON / OFF 3. MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-018-23

Service Bulletin/Repair Instructions

02-001-23

Service Bulletin/Repair Instructions

SSPC8

Service Bulletin/Repair Instructions

SPECIAL SERVICE PROGRAM SSPC8 - 2023 CX-9, 2023 MAZDA3, 2022-2023 MX-30 - REMOTE TUNER CONCERN. Mazda Motor Corporation has decided to conduct a Special Service Program on certain 2023 CX-9, 2023 Mazda3 and 2022-2023 MX-30 vehicles equipped with a Remote Tuner module. There are 16,405 U.S. vehicles in the United States affected by this SSP.Certain Remote Tuner modules were built with outdated software and therefore the power shutdown processing of the module may not be completed. In this condition, if the vehicle is left unused for a certain amount of time, the 12V battery may discharge and run out.

SA-015-23

Service Bulletin/Repair Instructions

Mazda Connect Services - Frequently Asked Questions (FAQ)

SA-012-23

Service Bulletin/Repair Instructions

Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.

09-015-23

Service Bulletin/Repair Instructions

Some customers may notice an abnormal noise (i.e. whine, groan, rattle or squeak) coming from the front combination lights when turning them on, or a few minutes after turning them off. The noise may be due to contamination by foreign matter during the manufacturing process. The fan motor bearing may become worn out during use. To eliminate the noise, the production process at the supplier and the material has been modified.

SA-009-23

Service Bulletin/Repair Instructions

Some customers may complain about any of the following: Infotainment Center Display does not provide the Authorization Code during the MyMazda App Connected Vehicle enrollment. Remote function(s) inoperative. Engine Start / Stop, Door Lock / Unlock, Lights ON / OFF MAZDA CONNECT connected vehicle reception strength icon shows "X" or " ".

SA-008-23

Service Bulletin/Repair Instructions

07-002-23

Service Bulletin/Repair Instructions

Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 Â°F (10Â°C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced since December 2021 at the supplier.

Reading this report

Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.