Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSIB 26-07
This bulletin is to provide instructions for clearing DTC 1067 FMI 7 (Pressure Sensor Not Calibrated) and FMI 11 (Primary and Secondary Circuit Pressure Sensor (PS1/PS2) Plausibility Error - BS Pressure), when required to prevent the loss of Adaptive Cruise Control functionality and the illumination of a warning indicator.
TSIB 26-05
This bulletin introduces an optional product improvement to the A/C compressor drive system for coaches equipped with a Cummins X12. The improved pulley system is available for customers who wish to reduce noise and vibration characteristics and may be installed at the customer’s discretion.
TSIB 26-01
This TSIB provides information to provide a software update. Some coaches using MCC HVAC Eco-Tempo ECU # 07-10-009 software T35-1581 / V1.04 may be experiencing random fault codes due to MCC software errors.
TSIB 26-04
This TSIB is to inform customers the recommended steering axle cleaning/greasing instructions to prevent damage on axle components due to displacement of grease from the bearings, lubrication reduction and accelerate wear for coaches with independent front suspension.
TSIB 24-03
Information to owners showing the proper procedure for checking the oil level in a BITZER HVAC compressor.
ITS61012
Service instruction for updating plug doors to improve reliability and reduce wind noise.
ITS60634
Instructions to properly adjust entrance door to ensure proper operation.
ITS60624
Instructions for improving fuel tank venting while fueling.
TSIB 22-04
Technical Service Information Bulletin describing the retrofit for the front junction box cover on specifically equipped buses.
TSIB 22-02
This Technical Service Information Bulletin is a supplemental reminder to all MCI owners/operators of vehicles which are affected by the Cummins Equipment Recall 21E-099 and MCI Vehicle recall 21V-971.
TSIB 21-01
This Technical Service Information Bulletin (TSIB) describes an update from Meritor for the bolt torque application requirements on hub-to-rotor bolts for the front, drive and tag axles, on specific coaches equipped with Meritor EX225 disc brakes, on either Conventional, PreSet or Unitized Wheel-End hubs.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.