Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSIB 26-07
This bulletin is to provide instructions for clearing DTC 1067 FMI 7 (Pressure Sensor Not Calibrated) and FMI 11 (Primary and Secondary Circuit Pressure Sensor (PS1/PS2) Plausibility Error - BS Pressure), when required to prevent the loss of Adaptive Cruise Control functionality and the illumination of a warning indicator.
TSIB 26-05
This bulletin introduces an optional product improvement to the A/C compressor drive system for coaches equipped with a Cummins X12. The improved pulley system is available for customers who wish to reduce noise and vibration characteristics and may be installed at the customer’s discretion.
ITS61738
Instructions for installing updated software to allow the PLC system to "sleep".
TSIB 26-01
This TSIB provides information to provide a software update. Some coaches using MCC HVAC Eco-Tempo ECU # 07-10-009 software T35-1581 / V1.04 may be experiencing random fault codes due to MCC software errors.
TSIB 26-04
This TSIB is to inform customers the recommended steering axle cleaning/greasing instructions to prevent damage on axle components due to displacement of grease from the bearings, lubrication reduction and accelerate wear for coaches with independent front suspension.
TSIB 25-08
MCI noticed that some customers operating in severe duty environments were experiencing the exterior U-Joints of the lower steering shaft binding due to corrosion. Because of this, MCI has developed a new re-greaseable U-Joint service kit (NF PN: 6505981) to replace the existing greased for life U-Joint on lower steering shafts. Rework instruction and preventive maintenance guide are provided below. Following this procedure and preventive maintenance will increase the life of MCI lower steering shafts.
TSIB 25-05
This TSIB is to remind MCI coach operators that when servicing the HVAC belts, idler pulleys or the lower mount of the idler pulley bracket, ensure that the lower mount is adjusted so it is not contacting the bumper support beam nor the bumper itself.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.