Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MXR-TSB-032
McNeilus Truck and Manufacturing identified an issue with over-torqued bolts on the lower ladder platform. The bolts used to secure the lower ladders to the lower ladder platform were over-torqued causing the bolts to fail. New hardware needs to be installed in placed of the over-torqued bolts.
MXR-TSIB-036
McNeilus Truck and Manufacturing offers these instructions for changing the Record DVR settings on STONKAM® DVR system installed on some McNeilus Rear Discharge Mixers.
MXR-TSB-030
McNeilus Truck and Manufacturing has identified an issue where certain McNeilus Bridgemaster® vehicles produced between July 1, 2020 and April 17, 2022 may have the incorrect compensator setting on the pump which controls the maximum pressure adjustment for the tag axle. In some cases, the maximum pressure may be set to 2900 psi instead of 3200 psi. If the maximum pressure was not set correctly, depending on the load configuration of the truck, this may place additional weight on certain axles and may not allow the truck to conform to local bridge laws. The steering, braking, and handling of the truck is not affected by this issue.
MXR-TSB-029
Inspection and possible rework required on certain bolts on the Bridgemaster® V axle regarding torquing specifications.
MXR-TSIB-034
In this technical service information bulletin, McNeilus Truck and Manufacturing releases information for new decals created for the mixer serial number and Bridgemaster® Axle serial number. These new decals replace stamped serial numbers on the mixer front pedestal. The decals will be printed with the correct serial number for your mixer and if it is a Bridgemaster Mixer, then the serial number for your Bridgemaster Axle will have an additional decal. These new decals are located on the inside of the driverâs doorjamb, near the complete vehicle decal.
MXR-TSIB-033
McNeilus Truck and Manufacturing offers these instructions to restore lower ladder rung clearance.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.