Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
PB_750
To improve the fitment and operational reliability of manual window cranks by installing a fabricated collar over the regulator splines, eliminating looseness and reducing effort when raising or lowering the window.
SB_446_4
The GEN 1 Husky 3 foam pump from FSC is being discontinued. To keep supporting our customers, a conversion kit is available to install the GEN 2.1 Husky 3 foam pump in place of the GEN 1.
SB_714
Secondary lock-tab washers are commonly used in applications where parts are subjected to rotational forces. It is crucial for safe operation of the apparatus that these retainers remain in place.
PB_725
As a product improvement, Pierce is now offering an exclusive HosemateTM Safety Swivel. These flanges will be bolt-on and retrofitted to any Akron/Elkhart four-bolt flanged valves using the same bolts and gaskets found on the standard swivel and plug. We also offer the Trident Hosemate in the flange sizes for the F1, F3, and F5 lengths. This new safety swivel allows the end user to avoid twists in hose lines as they are charged.
SB_709.1
This bulletin will provide proper installation instructions and torque ratings for constant torque clamps that are used to secure coolant hoses on Pierce Fire Apparatus.
SB_446.3
The GEN 1 Husky 3 foam pump from FSC is being discontinued. To keep supporting our customers, a conversion kit is available to install the GEN 2.1 Husky 3 foam pump in place of the GEN 1.
SB_651_1
This bulletin is to support the dealer network when replacing a ASL 360 ECU that requires programming on the truck.
SB_474_1
Software update for fault codes on Command Zone display: This software update may help remove ambiguity between active and inactive engine error codes shown on the Command Zone display.
WB_706
All Roto Rays are warranted to the purchaser for twenty-four months from the date of service against defects in material or workmanship. During the warranty period products found to be defective will be repaired or replaced (at Roto Rays option) without charge. The defective light must be returned to Roto Rays, INC., 722 Park Ave., Herndon, VA 201·70. The light will be returned to the purchaser prepaid.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.