Launch NCU-VSXHE
Service Bulletin/Repair Instructions
eCall Hermes Software Update
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
Launch NCU-VSXHE
eCall Hermes Software Update
Initial NCU-Rear
Rear Wheel Speed Sensor (RV)
MY14-16 906 OM65
Stop Sale for Pending Emission Modification
Launch NCU - 202
Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for location based services, and an incorrect vehicle position may be displayed. Please note the E-call feature is not impacted by this issue. What We?re Doing MBUSA will conduct a Service Campaign. An authorized Mercedes-Benz dealer will update the PASS Control Unit Software
LI82.85-P-072218
The "Commuter route" option is activated in the settings of the MBUX multimedia system (A26/17). Therefore, the navigation system automatically detects that the vehicle is on a commuter route and automatically starts route guidance without any voice output.
Initial NCU - MY
Initial Notice - STOP SALE - Pending Emissions Modification
LI82 85-N-069567
MBUX multimedia system: Smartphone Integration (Apple CarPlay, Android Auto) not available
LI82 85-N-069752
MBUX multimedia system: Navigation and/ or Satellite Radio not selectable/not available
Sprinter 2018111
Status of Parts Ordering - Sprinter
Sprinter Weekly
Status of Parts Ordering - Sprinter
Weekly Parts Upd
Status of Parts Ordering - Sprinter
LI47 00-N-067942
Check Engine Light Illuminated with Stored Fault Code P008700 in ME Control Unit N3/34 and or P008A00 in FSCU N118
LI33 00-N-066643
Ball joint check on front axle
Sprinter October
Status of Parts Ordering - Sprinter
Sprinter Septemb
Status of Parts Ordering - Sprinter
Sprinter August
Status of Parts Ordering - Sprinter
LI27 00-N-066833
Transmission leak in area of oil pump
LI07-00N061850
XENTRY (DAIMLER): DUE TO SCN CODING BEING RESET TO 8KM/H MAXIMUM SPEED LIMIT, ITS NOT RELATED TO COUNTDOWN MODE AND CAUSES LIMP HOME MODE AND CDI CONTROL UNIT AND SPEED LIMITTER WILL BE SET TO ORIGINAL SETTING. MODEL SPRINTER 906. NO YEARS LISTED. *PE
LI54-25-N-061756
XENTRY (DAIMLER): FAULT CODE C007500 IS STORED IN ELECTRONIC STABILITY PROGRAM (ESP) CONTROL UNIT CAUSING INDICATOR LAMP TO BECOME ACTIVE AND DAMAGE, INTERNALLY, BY BEING OVERLOADED, BRAKE LIGHT SWITCH. MODEL 906. *PE
LI07.04-N-056999
XENTRY(MERCEDES) : COMPLAINT REGARDING ENGINE WARNING LAMP, REDUCED ENGINE POWER, FAULT CODE IN CDI CONTROL UNIT. *LJ
SCB-2014080001
MERCEDES: THE INSTRUMENT CLUSTER IS DISPLAYING THE DRIVER ASSISTANCE SYSTEMS FAILING TO CORRESPOND TO CURRENT PRODUCTION CONFIGURATION. MODEL 2014 906. *PE
V-SC-2014050008
Update Instrument Cluster Control Module Software
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.