Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MTB005 -24 MV
Service Bulletin/Repair Instructions
In the course of continuous product improvement and further development, the MCU equipped on the models Enduro Veloce and LXP has been improved with an upgraded hardware. The target of the improvement is to avoid potential power supply problems of the GPS and IMU systems during the vehicle ignition phase. The new MCU unit has got the new code SPMV8A00D1269. In the event that “IMU LINK” and “GPS LINK” faults occur at the same time when the vehicle is turned on (key ON) the issue can be directly related to the MCU driver that won’t ensure the proper power supply to the two devices. The errors previously indicated are attributable to the power supply by the MCU only when both appear and at the time of the initial vehicle check (key ON). In this case it will be possible to proceed with the replacement of the MCU under the actual warranty policies equipping the bike with the upgraded unit code SPMV8A00D1269. It is needed to provide a documentation of the error occurring, please check the warranty table at the end of the document for more information.
MTB012 - 24 MV
Service Bulletin/Repair Instructions
New Dashboard software – LXP 950 Orioli MY 24 Enduro Veloce MY 24 - Wi-Fi, BLE, BT modules update for LXP EV dashboards - Dashboard SW update: availability of OTA process on Enduro Veloce model on dashboards delivered in 2023 or later CASE 1: Dashboards with production date 2023 (indicated on the sticker in the back of the part, see picture below) must go through a mandatory update process in order to: - Update and have fully working the Wi-Fi, BLE, BT modules - Make SW update available - Make iOS iPhone available as a supported device CASE 2: Dashboards produced after 2023 can run the updates directly from the MV Ride App. Check the next points for identify the type of dashboard.
MTB341
Service Bulletin/Repair Instructions
Following continuous monitoring of the quality of our product, it has been found that on the above vehicles it is necessary to change the routing of the wires coming out of the ignition block aimed to reduce the stress on the wires during the steering operations.
MTB344
Service Bulletin/Repair Instructions
Following continuous monitoring of the quality of our product, it has been found that on the abovementioned vehicles it is necessary to replace one of the crankcase’s closing screws.
MTB345
Service Bulletin/Repair Instructions
Following continuous monitoring of the quality of our product, it has been found that on the vehicles mentioned above it is necessary to add a retention strip on the water hose to ensure the correct distance of the same from the exhaust manifold in every situation.