SMB180
Service Bulletin/Repair Instructions
This Service Manual Bulletin Provides Updated Preventive Maintenace Interval for the Crankcase Breather Tube Element on Buses Equipped with a Cummins Diesel ISL 07 or ISL 09 Engine.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SMB180
This Service Manual Bulletin Provides Updated Preventive Maintenace Interval for the Crankcase Breather Tube Element on Buses Equipped with a Cummins Diesel ISL 07 or ISL 09 Engine.
PMB049
This Parts Manual Bulletin provides new part number information for the moveable arm kit for the Kongsberg brake and accelerator assembly on specifically equipped vehicles.
SMB178
This Service Manual Bulletin provides new OEM (Kongsberg) PM inspection requirements and new installation procedure for the adjustable floor pedal moveable arm on specifically equipped vehicles.
SMB177
This Service Manual Bulletin provides new inspection and replacement requirements for the coolant hoses located above the SDS enclosure on specifically equipped buses.
SMB176
This Service Manual Bulletin provides new information on how to check for proper chain tension, as measured by the chain deflection, while performing the ramp mechanism initial adjustments. This bulletin only applies to vehicles with New Flyer designed ramps.
PMB048
This Parts Manual bulletin provides information on the part numbers of the engine lift brackets
SMB173
This bulletin provides PM inspection requirements for the K-menber on the fuel tank support structure
SMB170
This Service Manual Bulletin provides a correction for the information regarding the replacement of the DEF tank suction filter.
SMB168
Service Manula Bulletin provides revised OEM information on the exhaust, after treatment System and DEF tank.
ITS6273
TECHNICAL INSTRUCTION - REPLACE COOLANT SURGE TANK - SPECIFICALLY EQUIPPED VEHILCES
ITS6244
TECHNICAL INSTRUCTION TO INCORPORATE AN ADDITIONAL PRESSURE PROTECTION VALVE (PPV) TO THE EMERGENCY BRAKE RELEASE SYSTEM, FOR SPECIFICALLY EQUIPPED VEHICLES OPERATING IN NEW YORK STATE ONLY.
ITS6192
Technical Instruction to Add PPV valve to Parking Brake Optional Emergency Release System for New York State.
ITS5909
NEW FLYER: 2010 EPA OR NEWER ENGINES AND MINI-HYBRID COOLING SYSTEM BUSES WITH ISOLATED PIPE CLAMPS MAY EXPERIENCE RADIATOR CORROSION. *TA
ITS5850
TECHNICAL INSTRUCTION TO REMOVE AND REPLACE SMARTREND FOOT SWITCHES.
ITS5603
TECHNICAL INSTRUCTION TO REMOVE AND REPLACE DEF TANK FILLER NECK AND CAP.
ITS5681
TECHNICAL INSTRUCTION TO REMOVE AND REPLACE EMP BOOSTER PUMP.
ITS-5322
NEW FLYER: INFORMATION PROVIDED ON THE REMOVAL OF THE ISE COOLING LOOP BYPASS. NO MODEL OR YEARS LISTED. *PE
ITS5601
Technical Instruction to Correct Randon Shutdown of Instrument Panel.
ITS5487
Technical Instruction to Add Thermo-L-Wrap to Coolant Lines.
ITS5426
Technical Instruction to Modify Front Curbside Skid Plate Installation.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.