ITS60830
Service Bulletin/Repair Instructions
Instructions to modify ECP & MCP pump connectors to prevent water intrusion
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
ITS60830
Instructions to modify ECP & MCP pump connectors to prevent water intrusion
ITS61063
Instructions to Service to remove bypassed engine calibration from ECM and replace DEF sensor as required.
ITS61148
Instruction to Service to check the four mounting bolts that attach the steering box mounting bracket to the frame of the bus to ensure they are torqued to the correct value.
ITS61187
Instructions to Service to incorporate a PLC Update to prevent interlock activation when CAN speed messages are absent.
ITS61122
Instruction to Service for updating the battery program on certain ELFA2 buses for Improved BMS response to overcharging and other functional safety mechanisms, more robust detection of failure modes through DTCs, improving Battery Data Recorder (BDR) capabilities, streamlined flashing processes, and logic improvements for better integration with application.
ITS60838
Instruction to Service 60838 to check/replace fuse box mounting hardware as required.
ITS60452
Technical Instruction describing how to rework and adjust the stop request pull cord cover.
ITS60401
Technical Instruction describing how to tighten hardware and replace rivets on upper deck cantilever seats where required.
ITS60433
Technical Instruction describing how to reseal floor seam trims.
ITS60417
This technical instruction describes how to replace dust covers and seal and protect the harnesses associated with the Smart Rider suspension leveling system for 40 foot buses with components installed on both axles.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.