SMB191
Service Bulletin/Repair Instructions
Service Manual Bulletin - Changes to Cummins ISLG and L9N engine oil specifications and oil change intervals.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SMB191
Service Manual Bulletin - Changes to Cummins ISLG and L9N engine oil specifications and oil change intervals.
TSIB 20-01
Technical Service Information Bulletin describing changes to the Cummins ISLG, L9N, ISB6.7G and B6.7N engine oil specifications.
TSIB-18-01
This Technical Service Information Bulletin Decsribes How to Inspect and Reroute as Required the Cummins L9N Engine Crankcase Ventilation Hose.
SMB-182
This Service Manual Bulletin Identifies a New Requirement for Bolt Replacement in the Artic Joint Support Frame Installed on your New Flyer Vehicle.
PMB049
This Parts Manual Bulletin provides new part number information for the moveable arm kit for the Kongsberg brake and accelerator assembly on specifically equipped vehicles.
SMB178
This Service Manual Bulletin provides new OEM (Kongsberg) PM inspection requirements and new installation procedure for the adjustable floor pedal moveable arm on specifically equipped vehicles.
SMB177
This Service Manual Bulletin provides new inspection and replacement requirements for the coolant hoses located above the SDS enclosure on specifically equipped buses.
SMB176
This Service Manual Bulletin provides new information on how to check for proper chain tension, as measured by the chain deflection, while performing the ramp mechanism initial adjustments. This bulletin only applies to vehicles with New Flyer designed ramps.
PMB048
This Parts Manual bulletin provides information on the part numbers of the engine lift brackets
SMB173
This bulletin provides PM inspection requirements for the K-menber on the fuel tank support structure
SMB169
This Service Manual Bulletin provides a procedure for venting the tanks when the solenoid valve is stuck closed or not operating, and a procedure for the installation of the solenoid valve on the CNG tank.
ITS5909
NEW FLYER: 2010 EPA OR NEWER ENGINES AND MINI-HYBRID COOLING SYSTEM BUSES WITH ISOLATED PIPE CLAMPS MAY EXPERIENCE RADIATOR CORROSION. *TA
ITS5895
Technical Instruction to Secure Electrical Harness in Muffler Compartment.
ITS5642
TECHNICAL INSTRUCTION TO REPLACE COOLANT SYSTEM COMPONENTS.
ITS5533
Technical Instruction to Relocation of Excess Flow Valve on Rear CNG Roof Pack Assembly.
ITS5601
Technical Instruction to Correct Randon Shutdown of Instrument Panel.
ITS5426
Technical Instruction to Modify Front Curbside Skid Plate Installation.
ITS5424
Technical Instruction to Add Inline Filter for Air Intake Line.
ITS5233
Technical Instruction to Install Cosmetic Plugs and Cover Plates onto Articulated Joint Front Arch.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.