NTB08-097L
Service Bulletin/Repair Instructions
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
NTB08-097L
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB23-049
12 VOLT BATTERY TESTING FOR IN-SERVICE VEHICLES SERVICE INFORMATION The following Service Information lists NNA procedural recommendations for establishing good connections while performing 12V battery testing. These recommendations are expected to promote uniformity during the connection process, therefore reducing the number of incorrect âTest with DCAâ and âReplaceâ results. HINT: If 12 volt batteries are allowed to discharge for a prolonged period of time, battery life may be drastically reduced. This condition may lead to premature battery replacement and customer dissatisfaction. IMPORTANT: ï· CPX-900 is now an accepted testing tool to use along with or in place of the DSS-5000 ï· CPX-900 operating instructions are found at: https://nissancpx900.midtronics.com/ ï· DSS-5000 operating instructions are found at: https://nissandss5000.midtronics.com/ ï· DCA-8000 is now a required testing tool to be used for all warranty replacement decisions. The DCA-8000 is also a more efficient charger than previously available, and will charge any available 12 volt lead acid battery safely and accurately as long as all precautions and inputs are made correctly. The DCA-8000 operating instructions are found at: https://nissandca8000.midtronics.com/
NTB23-053
SILICONE-BASED LUBRICANT OR GREASE CAN DAMAGE ELECTRICAL COMPONENTS SERVICE INFORMATION Do not apply Silicone-based lubricants or grease to, or around, any interior electrical components. To avoid the risk of death or severe personal injury, do not directly spray Silicone-based lubricant or grease, or inadvertently overspray Silicone-based lubricant or grease onto any interior electrical components. These types of lubricants can be detrimental to the proper operation of electrical components.
NTB13-107F
VEHICLE KEY NOT DETECTED / AUTHENTICATED, ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB16-003C
INTELLIGENT KEY REPLACEMENT OR SWAPPING BETWEEN VEHICLES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Discard all previous versions of this bulletin.
NTB09-081J
WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB13-028H
REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB08-097K
DIAGNOSIS OF VEHICLE PULL (DRIFT) AND/OR STEERING WHEEL OFF-CENTER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB10-126C
WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB99-001F
STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB99-001e
STRUT AND SHOCK ABSORBER REPLACEMENT GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NTB00042D
SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Nissan STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
NTB-08-055-A
NISSAN: SRS PRECAUTIONS DURING SERVICE;IMPROPER MAINTENANCE, INCLUDING INCORRECT REMOVAL AND INSTALLATION OF THE SRS, CAN LEAD TO A SERIOUS INJURY OR DEATH CAUSED BY UNINTENTIONAL ACTIVATION OF THE SRS ON ALL NISSAN MODELS WITH THE SRS SYSTEMS. *PE UPDATED 2/21/14. *PE
NTB08055C
SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle. IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
NTB92123D
Nissan Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Nissan design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Nissan's standards. Nissan Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Nissan most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletinfor further detail.
NTB00033E
SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake incidents fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake incident based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific incident. See this bulletin for further details.
NTB04094A
If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see NTB00-033). See this bulletin for further detail.
NTB98018G
As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
NTB-13-038
NISSAN: LOCK/UNLOCK REQUEST BUTTON ON OUTSIDE HANDLE DOES NOT RESPOND. *JS
NTB99001A
SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
NTB-09-101
NISSAN: TIRE PRESSURE MONITORING SYSTEM (TPMS) WARNING LIGHT ON/FLASHING. NO MODELS OR MODEL YEARS LISTED. *PE UPDATED ON 08-11-2011. *KB
NTB-09-129
NISSAN: VENT CONTROL VALVE REPLACEMENT. WHEN REPLACING THE EVAP CANISTER VENT CONTROL VALVE FOR REASON: USE THE ONE LISTED ON PAGE 2; FOR VENT CONTROL VALVE REPLACEMENT PROCEDURE, REFER TO THE APPROPRIATE SECTION OF THE ELECTRONIC SERVICE MANUALS (ESM; WHEN INSTALLING THE NEW VALVE, DO NOT ADD ANY LUBE TO ITS O RING; FOR FRONTIER (D40 SERIES) ONLY, INSTALL THE PROTECTOR LISTED IN PARTS INFORMATION. *PE INCLUDES 2005-09 FRONTIER. UPDATED 12/8/10. *PE
NTB-09-030
NISSAN: THE 12 VOLT BATTERY IS AN IMPORTANT PART OF THE VEHICLE ELECTRICAL SYSTEM AND IS REQUIRED TO STAY CONNECTED WHEN THE ENGINE IS RUNNING. TO PREVENT DAMAGE TO VEHICLE ELECTRONIC COMPONENTS FOLLOW THE INSTRUCTIONS/CAUTIONS. NO MODEL YEARS LISTED. *PE
99022
FRONT SEAT BELT LATCH PLATE RETAINING BUTTON MISSING. *TT
NTB99067A
NISSAN INTEGRATED HOMELINK TRANSMITTER SYSTEM USED TO ACTIVATE MOST ELECTRONIC GARAGE DOORS AND SECURTY GATES. VARIOUS MODELS INCLUDING THE 2004 PATHFINDER ARMADA. *TT
NTB99022C
FRONT SEAT BELT LATCH PLATE RETAINING BUTTON MISSING. *TT
NTB99053B
SUBJECT REGARDING REVISED THROTTLE POSITION SENSOR (TPS) ADJUSTMENT PROCEDURE. *TT
NTB01063
INFORMATION ON VALVE SHIM LIFTER SET.*JB
NTB01057
SUBJECT REGARDING REVISED MAINTENANCE PROCEDURES. *SLC
NTB01044
SERVICE INFORMATION REGARDING INNER TIE ROD WRENCHES. *SB
NTB99022B
SEAT BELT LATCH PLATE RETAINING BUTTON MISSING. *TT
NTB01023
INFORMATION REGARDING ESSENTIAL TOOL: THROTTLE POSITION SENSOR TEST CONNECTOR. *SLC
NTB00079
ON APPLIED VEHICLES, THE POWER AUDIO ANTENNA IS INOPERATIVE, THE ANTENNA ASSEMBLY CIRCUIT BOARD MAY BE CORRODED DUE TO IMPROPER WATER DRAINAGE. *TT
NTB00054
VEHICLES BUILT BEFORE JN1CA31D1YT746029 MAY EXHIBIT A ENGINE TIMING CHAIN NOISE. *TT
NTB99014A
SOME VEHICLES WITH AUTOMATIC TRANSMISSION MAY EXHIBIT A SITUATION WHERE THE SHIFT HANDLE IS HARD TO MOVE OR OPERATE. THIS PROBLEM MAY BE WORSE DURING HOT WEATHER. *TT
NTB99031B
SOME VEHICLE MAY EXHIBIT A GROAN OR HUMMING NOISE FROM THE REAR OF THE VEHICLE AFTER RELEASING THE BRAKE PEDAL AND MOVING FORWARD SLOWLY AT APPROXIMATELY 5 MPH (8 MPH). *TT
NTB99-036A
INFORMATION REGARDING KEYLESS REMOTE ENTRY PROGRAMMING. *TT
NTB00043
SOME VEHICLES MAY EXHIBIT THE SRS LIGHT FLASHING, WITH SELF DIAGNOSIS INDICATING EITHER SIDE MODULE LH [OPEN] (CODE DA) OR SIDE MODULE RH [OPEN] (CODE 7A). *TT
NTB00042
SUBJECT REGARDING MODIFICATIONS TO AND / OR TAMPERING WITH THE SUPPLEMENTAL SIDE AIR BAG SYSTEM. *TT
NTB00015
CONCERNS WITH THE TRUCK LID POPPING OPEN. *TT
NTB99017A
SOME CUSTOMERS MAY INDICATE THAT A LIGHT TICKING OR HUMMING NOISE CAN BE HEARD COMING FROM THE BLOWER MOTOR OF AN APPLIED VEHICLE WHEN THE MOTOR IS RUN AT LOW FAN SPEEDS. *TT
NTB99082
THIS BULLETINS STATES THAT THE SECOND SASH GUIDE WAS DELETED FROM THE SERVICE PART SEAT BELT ASSEMBLY, HOWEVER; DELETION OF THE SECOND SASH GUIDE DOES NOT AFFECT THE OPERATION OF THE SEAT BELT ASSEMBLY. *TT
NTB98070A
SOME VEHICLES MAY EXHIBIT A SRS LIGHT FLASHING, AND SIDE MODULE LH / RH (OPEN) OR CODE DA / 7A. *TT
NTB99067
NISSAN INTEGRATED HOMELINK TRANSMITTER SYSTEM USED TO ACTIVATE MOST ELECTRONIC GARAGE DOORS AND SECURTY GATES. *TT
NTB98008B
SUBJECT REGARDING EGI HARNESS WIRE BREAKAGE DIAGNOSIS AND REPAIR PROCEDURE. *TT
NTB99022A
CONCERNS WITH THE FRONT SEAT BELT LATCH PLATE STOPPER BUTTON MISSING. *TT
NTB9811A
SOME VEHICLES WITH AN AUTOMATIC TRANSMISSION MAY EXHIBIT A HESITATION OR THROTTLE SHOCK AFTER THE ACCELERATOR IS GENTLY APPLIED AND THEN RELEASED. *TT
NTB99030A
INFORMATION REGARDING AUTOMATIC TRANSAXLE OUTPUT GEAR WHINE (60 - 70 MPH). *TT
NTB99005A
KEY VALUE BRAKE PAD SERVICE INFORMATION. *TT
NTB99031A
VEHICLES MAY EXHIBIT A GROAN OR HUMMING NOISE FROM REAR AFTER RELEASING BRAKE PEDAL. *TT
NTB99036
INFORMATION REGARDING KEYLESS REMOTE ENTRY PROGRAMMING. *TT
NTB99030
SOME VEHICLES MAY EXHIBIT A WHINE NOISE WHEN THE VEHICLE IS DRIVEN BETWEEN 60 AND 70 MPH, IN THIRD AND FOURTH GEAR. *TT
NTB99031
EXHIBITING REAR BRAKE GROAN / HUMMING NOISE AFTER RELEASING BRAKE PEDAL. *TT
NTB99019
SERVICE MANUAL PROCEDURE CHANGE FOR REAR OXYGEN SENSOR DTC(S) P0137, P0138, P0139, P0140, P0141 AND THREE-WAY CATALYST DTC P0420. *TT
NTB99022
SUBJECT REGARDING MISSING FRONT SEAT BELT LATCH PLATE RETAINING BUTTON. *TT
NTB99024
REPAIR PROCEDURES FOR VEHICLES EXHIBITNG WIND NOISE. *TT
NTB99005
SERVICE INFORMATION ON KEY VALUE BRAKE PADS. *TT
NTB98111
VEHICLES WITH AN AUTOMATIC TRANSMISSION EXHIBITS A HESITATION OR THROTTLE SHOCK AFTER THE ACCELERATOR IS GENTLY APPLIED AND THEN RELEASED. *TT
NTB9100
CONDITIONS WITH LEFT REAR DOOR DOESN'T UNLOCK WITH REMOTE. *YC
NTB98097
VARIOUS INFORMATION EXHIBITING INTERIOR SQUEAKS AND RATTLES WHILE DRIVING. *YC
NTB98101
EXPERIENCING FRONT SPRING RATTLE/ BUZZ NOISE. *YC
NTB98081
VEHICLES EXHIBITING STEERING PULL AND / OR DRIFT WHEN DRIVEN AT HIGHWAY SPEEDS. *YC
NTB98080
SOME OWNERS MAY COMMENT THAT THE DRIVER'S OR PASSENGER'S POWER SEAT DOES NOT MOVE FORWARD OR BACKWARD. *TT
NTB98076
SERVICE PROCEDURES FOR CONSOLE LID REPAIR. *YC
NTB98070
AIR BAG LIGHT FLASHING. YD
NTB98053
CONDITION WITH (MIL) MALFUNCTION INDICATOR LAMP ON WITH REAR OXYGEN SENSOR DTC P0137 ( MINIMUM VOLTAGE MONITORING ) ( REAR H02S ) STORED IN THE ECM. *YC
NTB98029A
VEHICLES EXHIBITING A MIL 'ON' WITH ONE OR MORE OF THE BELOW DTCS STORED, THE CAUSE MAY BE INSECT NEST(S) IN THE EVAPORATIVE ( EVAP ) EMISSION CONTROL SYSTEM. *YC
NTB98050
EXPERIENCING SPARK KNOCK DURING ENGINE START. *YC
NTB98054
INFORMATION REGARDING SECURITY SYSTEM FALSE ALARMS. *YC
NTB98023
EXHIBITING A STEADY RATTLE NOISE FROM THE FRONT DASH AREA. *YC
NTB98003
SOME VEHICLES MAY DISPLAY A MALFUNCTION INDICATOR LAMP ON WITH DIAGNOSTIC TROUBLE CODE 1335 DUE TO HARNESS CONTACT WITH POWER STEERING PULLEY. *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.