Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
NTB26-030
NEW PROCESS TO REPLACE THE TCU SERVICE INFORMATION For the APPLIED VEHICLES, the process to replace the Telematics Communication Unit (TCU) has changed. If the TCU for the APPLIED VEHICLES needs to be replaced for any reason, an email must be sent to Aeris Global Services Operation Center (Aeris) to activate the TCU before it is installed. Follow the steps starting on page 2 to activate the replacement TCU.
NTB09-131C
CERTIFICATION LABEL AND VIN PLATE REPLACEMENT SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement “Certification Label” or “VIN Plate/Label” may be needed. HINT: Certification Label = FMVSS (Federal Motor Vehicle Safety Standards) label. These items may be available from Nissan by request if certain criteria are met. This bulletin lists the criteria and provides an application form for such replacements. · The “VIN Plate/Label” (metal plate or vinyl label) is attached to the instrument panel or body on the driver side at the base of the windshield (see Figure 1). · The “Certification Label” (vinyl adhesive label) is located on the lower area of the driver side B-Pillar (see Figure 1).
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.