24KWL/PBL
Service Bulletin/Repair Instructions
The verbiage in the Introduction section has been updated.
Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
24KWL/PBL
The verbiage in the Introduction section has been updated.
43-088
The procedure has been updated to include additional steps for verifying the software level on the vehicle electronic control unit (VECU2) and digital display (DD). Steps have also been added to the PACCAR Common Rail Injection 2 (PCI2) software verification.
E316
235 chassis have been removed from the chassis list and unflagged in PRWS due to expiration of applicable warranty coverage. 5 chassis have been added to the chassis list. The total chassis population is now 15,637.
E318
The Condition, Chassis Affected, Service Action, Warranty, and Procedure sections have been updated to include the latest prognostics bulletin verbiage. The Warranty section has also been updated to include Peterbilt specific SRT codes for filing cross-division repairs.
43-080
KW: A new recommended repair has been added to verify the software level and close the campaign in SIR.The repair procedure has been updated with additional note boxes for clear instructions. PB: The repair procedure has been updated with additional note boxes for clear instructions.
E335
Warranty section has been updated to include hood length definitions and filing instructions for progressive damage.
E338
Certain EPA21 PACCAR MX engines are equipped with PHINIA fuel injectors that do not meet PHINIA’s manufacturing specifications.
45-070
The attached procedures document has been updated with more detail and explanations. This is not a stand-alone procedure. Cummins Quickserve troubleshooting will specify the use of these procedures while troubleshooting specific fault codes.
22KWE/PBE
Sheppard Recall Order Process Update - The Parts section has been updated with revised steps for opening a TCS365 Order Support – Order Inquiry case.
CE031
Fuel Injection Pump part number 2344776PEX for MX-13 engines has been added to this warranty policy.
24PBE_KWE
The Parts section has been updated to clarify that freight charges for safety recall orders should not be passed on to the end customer.
24PBE
The right-hand shift stalk may have an improper wire harness terminal crimp within the wire harness connector. Loss of communication between the right-hand shift stalk and the vehicle may result in the vehicle being disabled after it comes to a stop, thereby increasing the risk of crash or injury. A warning will appear on the dash display when communication is lost, including transmission or engine warnings, “!” next to DNR/DNRP indicator, “-“ in the DNR/DNRP indicator, and/or chimes, depending upon whether you are operating a diesel/gas or battery electric vehicle.
E311
Condition, Chassis Affected, and Warranty sections updated with the following verbiage “E311 must be flagged and open in Service Information Record (SIR) at the time of RO open date to qualify.” Also, “Through Standard Warranty or any applicable active Extended Warranty” verbiage was removed from Warranty section.
T016 / 26-040
T016: Warranty section updated to include 0.5 hours for test drive. Recommended Repair T016C has been updated from 6.4 hours to 6.9 hours. SRT codes updated in PRWS Claim Coding Table: B25-17A for 6.9 hours created to replace all other codes. 26-040: Warranty section updated to include 0.5 hours for test drive. Recommended Repair 26040C has been updated from 6.4 hours to 6.9 hours. SRT codes updated in PRWS Claim Coding Table: B25-17A for 6.9 hours created to replace all other codes.
43-080 PB
As of 03/25/2025, this campaign has resumed. Software updates are now available to complete this campaign.
E327
Vehicles equipped with PACCAR MX engines with Engine Software Version NA202 or NA206 may display a dash STOP lamp incorrectly. PCI-2 software on these chassis must be reverted from NA202 to NA201 (Pack 2 injectors) or from NA206 to NA191 (Pack 1 injectors) to prevent incorrect STOP lamp display. 11014768 20250304 E327 20250227 E327 Emissions PETERBILT 365 2022 ENGINE Vehicles equipped with PACCAR MX engines with Engine Software Version NA202 or NA206 may display a dash STOP lamp incorrectly. PCI-2 software on these chassis must be reverted from NA202 to NA201 (Pack 2 injectors) or from NA206 to NA191 (Pack 1 injectors) to prevent incorrect STOP lamp display.
24PBL
Safety Recall Updated software and procedures are now available. Certain Vehicle Model Year 2021-2025 Peterbilt chassis configured for trailer towing require a software update for the Bendix EC80 ABS ECU. Software update procedures for certain Battery-Electric Vehicles (BEV) and EC80 ABS ECU part numbers are not yet available. This bulletin will be updated when software update procedures are available for these chassis. Safety Recall publish date: 1/10/25
32-025
Info Only Unnecessary starter replacements can result from customer complaints regarding engine starting issues. A new Starter Troubleshooting Guide has been created to provide a comprehensive list of starting system checks, which should reduce unnecessary starter replacements and associated warranty claims. Engine starting system warranty claims now require a completed Starter Checklist, a Battery Pack Midtronics Report, and a Cable Drop Midtronics Report. Claims filed without these documents may be denied.
02-194
Fix-As-Fail The window switch fails prematurely due to excessive amperage flowing through the window switch circuit. A new door harness design has been developed to prevent failures. Fix-As-Fail start date is 11/11/2024.
13-065
13-065 DAVIE4 Chassis Air Leak Testing Info Only A new test is now available in DAVIE4 to properly measure chassis air system pressure decay, provide test results, and pass/fail criteria. Your DAVIE tool must be at version 24.05 or newer for the test to be available. A test procedure document has also been made available that shows all necessary setup and testing procedure criteria (procedure document attached in Links section). The DAVIE4 “Check the air pressure decay rate” test and the test procedure document MUST be followed anytime a chassis comes in for a warranty related air system repair where excessive air system pressure decay is suspected. Warranty claims filed for air system pressure decay may be denied if DAVIE4 test AND test procedure have not been followed.
16-044
Fix As Fail The height control valve (HCV) rod on vehicles with low air leaf suspensions is prone to toggling over center during rough road conditions. With full suspension articulation, HCV bracket flexes and toggles over center the HCV linkage, which results in either deflated airbags or makes them unable to inflate. Fix-as-fail start date is 07/30/2024.
CE019
07/24/2024 - Updated the Emissions Warranty Coverage tables. Added new coverage tables and PartsLists for GHG/Vehicle Parts and ZEP/BEV Parts. 03/07/2022 - New Emissions bulletin which consolidates older versions and accounts for new CARBemissions requirements that go into effect with Engine Model Year 2022.
E306
Incorrect fuel filter drain and replacement procedures on EPA21 MX-11 and MX-13 engines can result in the following: .Debris and contaminants introduced into the high-pressure fuel system. .Denial of warranty claims for injector and/or fuel system faults. .Misfire, rough running, engine knock, and other associated faults and symptoms. Correct fuel filter procedures are outlined in attached service documentation.
45-064
Info Only - PACCAR is introducing Over-the-Air (OTA) software updates for engine MY17 and newer chassis equipped with Cummins X15, X12, ISX12, ISX12N, L9N, PX-7, and PX-9 engines The technology will leverage the existing Remote Diagnostic cs hardware to deliver secure software updates remotely. This will reduce downtime and save on maintenance costs for eligible vehicles.
23-005
Clutch pedal linkage lubrication service interval information is missing from the Service manual for Model 365, 367, and 389 chassis.
13-060
The service information for Bendix Air Dryer maintenance is being updated to include new procedures.
56-005
During PTO mode, the engine will not ramp up to the set RPM speed.
E297
When updating the software on a truck to RC6 or higher, please ensure a PM sensor is physically installed before performing the software update.
02-169
Info Only - Chassis equipped with a flush mounted battery box between the frame rails, and containing 3 batteries, may experience battery movement on the side where the single battery resides. This bulletin contains a procedure to fabricate a bracket to hold this battery in place.
E285
Emissions Recall: Engine Model Year 2021 MX engines built to EPA 21 emission standards (MY21B) and manufactured without a Particulate Matter (PM) sensor are required to have a PM sensor installed and the engine software updated. This is required for chassis to comply with current emissions standards.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.