Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
MI26-00
The gasket thickness was increased from 1.5 mm to 3 mm to prevent interference between the collar ends, which previously made it impossible to reach the specified tightening torque. Increasing the gasket thickness ensures sufficient clearance between the collar ends and thus guarantees optimal tightening.
IS-23019A
Sway bar collars improvement. Revision A : Add front sway bar support replacement and change bolts lenght.
WB23-32A
On the vehicles affected by this bulletin, headlamps may have a premature deterioration of the aesthetics of the internal surface. This issue has no impact on the performance and quality of the headlamp. See procedures for replacement by improved headlamps. Revision A: Parts list change
IS-23019
SWAY BAR COLLARS IMPROVEMENT
WB23-32
On the vehicles affected by this bulletin, headlamps may have a premature deterioration of the aesthetics of the internal surface. This issue has no impact on the performance and quality of the headlamp. See procedures for replacement by improved headlamps.
WB23-37
On the vehicles affected by this bulletin, the wiper motor harness needs a modification to avoid connector terminals corrosion.
MI23-15
Window Gaps Minimum Clearance on Converted Shells
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.