Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-PANT-2024-004-
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
S-SB-0015-14 Rev
SB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
S-SB-0005-15
SSB: The procedure in this bulletin is a general guideline on how to properly diagnose the air conditioning system after a component failure. Refer to the applicable Repair Manual for vehicle specific repair procedures and parts.
S-SB-0023-11 Rev
SSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
S SB 0024 14A
Automatic/Continuously Variable Transmission Replacement Precautions
S-SB-0003-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
S-SB-0020-11 Rev
TSB: OBSOLETE NOTICE-October 16, 2014: This bulletin is now obsolete. Please see S-SB-0024-14.
S-SB-0024-14
TSB: The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON," shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
S-SB-0017-14 Rev
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
S SB 0017 14A
Immobilizer and Smart Key Reset
S-SB-0017-14
TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
S-SB-0003-10 Rev
TSB: OBSOLETE NOTICE-June 6, 2014: This bulletin is now obsolete.
S-SB-0015-14
TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
S-TT-0059-13
Scion vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
S-SB-0042-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
S-SB-0037-11 Rev
All Scion models may include side airbags as optional equipment. Scion does NOT recommend replacement of original seat covers with non-Scion leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Scion may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Scion leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury.
S-TT-0075-13
The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
S-SB-0020-11
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
S-TT-0069-13
To receive satellite radio functions after the initial trial period has expired, the customer must enter into a contract with XM Satellite Radio Inc. After entering into a contract, registration of an 8-digit XM Radio ID is required. This 8-digit XM Radio ID is found by turning to channel ?0? of the satellite radio.
S-TT-0032-11 Rev
Prior to tire rotation use the quick reference chart below to verify the size of the lug nut and the lug nut torque specifications. The quick reference chart is applicable to current generation vehicles only.
S-SB-0019-13
California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
S-SB-0036-08 Rev
If a creak, tick, or rattle noise is heard at the top of the windshield, the source of the noise may be the two windshield stoppers bonded to the top of the windshield. This bulletin provides the recommended repair procedure to eliminate these types of noises from the windshield area.
POL13-01
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
TC-13-007
TOYOTA: SEE DOCUMENT SEARCH BUTTON FOR OWNER LETTER. ON CERTAIN VEHICLES, A WARRANTY ENHANCEMENT PROGRAM IS EXTENDED TO COVER BACK DOOR GARNISH THAT LOOSEN OR CAN BREAK WITH CONTINUOUS USAGE. MODELS 2005-2010 TC, 2004-2006 XB. *PE
ZTW Dealer Lette
In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the Back Door Garnish on 2005 to certain 2010 Model Year Scion tC and 2004 to 2006 model year Scion xB vehicles
ZTW Region Lette
In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Warranty Enhancement Program to extend the warranty coverage for the Back Door Garnish on 2005 to certain 2010 Model Year Scion tC and 2004 to 2006 model year Scion xB vehicles
ZTW WEP
Scion has received some reports where the Back Dorr Garnish may loosen. In certain cases, continued usage of the loose garnish could result in breakage of the Back Door Garnish
S-SB-0012-13
Some 2004 ? 2006 model year xB vehicles may exhibit a condition where the back door garnish becomes loose, and in some cases continued usage of the loose garnish may result in breakage. Please follow the procedure contained in this bulletin, which supplements the Repair Manual, to replace the back door garnish if it is loose or broken.
S-SB-003-10
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
SSB-0003-10
SCION: TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. FLASH REPROGRAMMING ALLOWS THE ECU SOFTWARE TO BE UPDATED WITHOUT REPLACING THE ECU. FLASH CALIBRATION UPDATES FOR SPECIFIC VEHICLE MODELS/ECUS ARE RELEASED AS FIELD FIX PROCEDURES DESCRIBED IN INDIVIDUAL SERVICE BULLETINS. *PE
00307
TECHSTREAM ECU FLASH REPROGRAMMING PROCEDURE. *KB
01105
CLOGGED OR BLOCKED FUEL INJECTORS. FUEL INJECTOR CLEANING. ALL 1990 - 2006 TOYOTA AND SCION MODELS EQUIPPED WITH PORT ELECTRONIC FUEL INJECTION (EFI). *TT
00905
U340E/U341E TRANSMISSION SOLENOID IDENTIFICATION. *TT
00205
LOOSE FEELING IN MANUAL TRANSMISSION SHIFT LEVER. *TT
00501
REPAIR MANUAL SUPPLEMENT: VEHICLE PULLING TO ONE SIDE. TOYOTA ALL MODEL YEARS. *MJ 2002 - 2007 MODEL YEARS. TOYOTA/SCION MODELS. *TT
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.