Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
SB-25-10-002
Service Bulletin/Repair Instructions
On some Cybertruck vehicles, customers may experience low frequency shaking, rattling, and/or vibrations at the door assemblies and/or LH side mirror when the vehicle is driven at high speeds. Upon customer complaint, inspect the vehicle for symptoms related to the condition. If symptoms are present, apply new adhesive to the reinforcement brackets and, if necessary, install additional butyl pads on the affected door assemblies.
SB-26-40-001
Service Bulletin/Repair Instructions
On certain Cybertruck vehicles, the halfshaft bolts may lose torque, which may cause a loud grinding noise if the hub and axle facespline teeth become unseated and damaged. If axle grinding noise is present before starting this bulletin, replace the hub, halfshaft, and halfshaft bolt on the impacted corner. Replace the remaining halfshaft bolts on the unaffected halfshaft locations. Then, run a Double Pedal Torque Test to confirm the hub and halfshaft facespline teeth are properly seated. If no axle grinding noise is present before starting this bulletin, replace all 4 halfshaft bolts and run a Double Pedal Torque Test to confirm the hub and halfshaft facespline teeth are properly seated.
SB-25-16-006
Service Bulletin/Repair Instructions
On certain Cybertruck vehicles, the AC junction box to fast charge contactor HV harness might have a poor crimp connection, which may cause increased resistance and localized heating in the harness. If the ancillary cover is removed for other procedures, replace the AC junction box to fast charge contactor HV harness with version -J or later.
SB-25-10-006
Service Bulletin/Repair Instructions
On some Cybertruck vehicles, the adhesive in top edge and/or center reinforcement bracket of the tailgate might delaminate, which may cause noise, vibration, and harshness (NVH). Inspect the vehicle for symptoms related to the condition. If symptoms are present, rework or replace the tailgate assembly.
SB-25-19-001
Service Bulletin/Repair Instructions
On certain Cybertruck vehicles, the Vehicle Emission Control Information label was printed with text that is illegible.
SB-25-11-001
Service Bulletin/Repair Instructions
On some Cybertruck vehicles, when the tonneau cover is closed, the tonneau slat water management channel is exposed, which under certain environmental conditions, may cause excessive water to enter the cargo bed.