T-SB-0051-26
Service Bulletin/Repair Instructions
This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries.
Vehicle report
2018 TOYOTA CAMRY HYBRID
Service bulletins
119 bulletinsTechnical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
T-SB-0110-20 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE August 20, 2026: This bulletin is now obsolete. Please see T-SB-0051-26.
24TE04
Warranty Program/Extension
Although the flow shut-off valve is covered by Toyota’s New Vehicle Limited Warranty for 36 months or 36,000 miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is providing coverage for repairs related to Flow Shut-off Valve Coolant Leak.
26TF01
Emissions
TECHNICAL INSTRUCTIONS FOR EMISSION NONCOMPLIANCE RECALL 26TF01 Certain 2018 – 2024 Model Year Camry HV and 2019-2022 Avalon HV Fuel Cap Negative Pressure Valve & Fuel Filler Dust Intrusion
T-SB-0097-23 Rev1
Service Bulletin/Repair Instructions
Some 2018 – 2024 model year Camry and 2018 – 2026 model year Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass.
T-SB-0104-21 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE February 27, 2026: This bulletin is no longer applicable and is now obsolete.
T-SB-0106-22 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE January 30, 2026: This bulletin is now obsolete. Please see T-SB-0001-26.
T-SB-0001-26
Service Bulletin/Repair Instructions
Some 2018 – 2024 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software.
T-SB-0055-24 Rev2
Service Bulletin/Repair Instructions
Some 2005 – 2026 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0112-24 Rev2
Service Bulletin/Repair Instructions
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0058-23 Rev1
Service Campaign
The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. The procedures outlined in this Service Bulletin aid in locating, inspecting, and repairing refrigerant leaks.
T-TT-0780-25
Service Bulletin/Repair Instructions
To assist with the early detection and early resolution of audio related concerns you may be asked to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by FTS and/or FPE.
T-SB-0112-24 Rev1
Service Bulletin/Repair Instructions
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0035-24 Rev2
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev2
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev2
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0061-23 Rev2
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application.
T-SB-0112-24
Service Bulletin/Repair Instructions
Some 2018 – 2021 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit a condition in which an “Engine Maintenance Required” message is displayed in the Multi-Information Display (MID). Additionally, the vehicle will exhibit DTC(s) P268111 (Engine Coolant Bypass Valve Circuit Short to Ground) and/or P268115 (Engine Coolant Bypass Valve Circuit Short to Battery or Open).
T-SB-0062-23 Rev2
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
T-SB-0032-23 Rev2
Service Bulletin/Repair Instructions
OBSOLETE NOTICE November 05, 2024: This bulletin is now obsolete. Please see T-SB-0101-24.
T-SB-0101-24
Service Bulletin/Repair Instructions
Some 2019 – 2022 model year Avalon and Avalon Hybrid, 2018 – 2024 model year Camry, and 2018 – 2025 model year Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked and/or a carpet loop is torn. The condition(s) can occur on both the driver and front passenger sides of the vehicle. An improved floor mat No. 2 has been developed to reduce the likelihood of these conditions.
T-SB-0055-24 Rev1
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
T-SB-0035-24 Rev1
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24 Rev1
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
T-SB-0039-24 Rev1
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-SB-0055-24
Service Bulletin/Repair Instructions
Some 2005 – 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
T-SB-0103-20 Rev1
Service Bulletin/Repair Instructions
This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 – 2025 model year Toyota vehicles.
T-SB-0061-23 Rev1
Service Bulletin/Repair Instructions
Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
T-SB-0062-23 Rev1
Service Bulletin/Repair Instructions
Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
T-SB-0035-24
Service Bulletin/Repair Instructions
Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: •Minor damage: requires only buffing to repair. •Moderate damage: usually requires neutralizing, color sanding, and buffing. •Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealer’s responsibility to protect and maintain the quality of the vehicle’s paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
T-SB-0038-24
Service Bulletin/Repair Instructions
To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. •The entire bulletin has been updated.
T-SB-0039-24
Service Bulletin/Repair Instructions
The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicle’s paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
T-TT-0754-24
Service Bulletin/Repair Instructions
Customers have expressed concerns about the performance of Qi Wireless Chargers. Wireless chargers on applicable vehicles are designed to work with Qi Certified devices only. MagSafe devices, that are not Qi Certified, may not charge as expected with Qi Wireless Chargers.
T-PANT-2024-004-
Service Bulletin/Repair Instructions
This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
TSB010622
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an Activation Card Number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
TSB011620
Service Bulletin/Repair Instructions
OBSOLETE NOTICE December 04, 2023: This bulletin is now obsolete. Please see T-SB-0097-23.
TSB009723
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2024 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
TSB008523A
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
TSB008523
Service Bulletin/Repair Instructions
TSB: Some 2016 ? 2023 model year Toyota vehicles may exhibit a hybrid system warning lamp occurring in below-freezing temperatures (below 32°F or 0°C). After performing a Health Check, one or both of the following Diagnostic Trouble Codes (DTCs) may be present: ?P1C8449 ? (High Voltage Power Resource Circuit Short during Ready ON) ?P300449 ? (High Voltage Power Resource Circuit Short during Pre-Charge) Follow the Repair Procedure in this bulletin to address this condition.
TSB005823
Service Bulletin/Repair Instructions
TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
TTT073723
Service Bulletin/Repair Instructions
TT: A very small percentage of customers experience operational difficulties with some telematics features which they cannot resolve on their own. These resources, in conjunction with the Repair Manual, are for dealership personnel to assist those customers with user issues, user errors, and compatibility issues with other vehicle systems and external applications encountered while operating telematics features. Toyota has developed and provided the following Telematics Diagnostic Guide to assist dealer technicians.
T-SB-0032-23
Service Bulletin/Repair Instructions
TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles.
T-SB-0047
Service Bulletin/Repair Instructions
TSB: Some 2019 model year Avalon Hybrid, 2018 ? 2019 Camry Hybrid, and 2019 ? 2021 RAV4 Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P019064 (Fuel Rail Pressure Sensor ?A? Signal Plausibility Failure). The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition.
TSB-0032-23
Service Bulletin/Repair Instructions
TSB: Some 2019 ? 2022 model year Avalon and Avalon Hybrid and 2018 ? 2023 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the carpet underneath the door scuff plate becomes untucked or a carpet loop is torn. The condition(s) can occur on both the front driver and front passenger sides of the vehicles
23TE04
Service Bulletin/Repair Instructions
DL: On December 20, 2022, a settlement of claims for certain low pressure fuel pumps was approved by the federal court. The settlement includes Toyota?s agreement to provide a Customer Support Program for certain 2014-2020 model year (MY) vehicles originally equipped with low pressure fuel pumps repaired under Safety Recall 20TA02, Safety Recall 21TA03, Safety Recall 21TA05 or Special Service Campaign 21TC03. The purpose of this Customer Support Program letter is to help clarify how to administer this coverage in accordance with the settlement.
T-TT-0611-20 Rev
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-SB-0106-22
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System, require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update, however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the expiration date of the dynamic subscription (stored in the head unit), must be checked. If the expiration date has not passed, a license key may be generated without the purchase of an activation card number (ACN). Updating the map without the use of an ACN is considered an Embedded Navigation Update (refer to pg. 10) and performing this update does not extend the subscription to dynamic map services. If the subscription period has expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an ACN. Utilizing an ACN, will initiate the Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the embedded navigation update and provide dynamic map services for a period of two years from the date that the Dynamic Navigation Update is performed. ACNs are provided in a pamphlet available through the normal parts ordering system
T-SB-0015-20 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE September 26, 2022: This bulletin is now obsolete. Please see T-SB-0088-22.
TTT069922
Service Bulletin/Repair Instructions
TT: Some Model Year 2018-2021 vehicles equipped with A25A-FKS/FXS or M20A-FKS/FXS engines may display the following message ?Engine Maintenance Required Visit Your Dealer? on the combination meter.
TSB001221Rev2
Service Bulletin/Repair Instructions
TSB: Some 2010 ? 2022 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard?. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard?. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition
T-SB-0110-20 Rev
Service Bulletin/Repair Instructions
TSB: This bulletin includes basic procedures for performing a rescue charge at battery on high voltage (HV) Ni-MH and Li-ion batteries. This bulletin should be used in conjunction with the applicable model and model year Repair Manual while performing the battery rescue charge. The GRX-5100 should be used wherever the Repair Manual references the Toyota Hybrid System (THS) charger
TSB009421Rev1
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
TTT069522
Service Bulletin/Repair Instructions
TT: To improve customer support of telematics connected services features, additional resources have been provided in the Service Lane - Knowledge Center.
TSB004722
Service Bulletin/Repair Instructions
TSB: Some 2019 model year Avalon Hybrid, 2018 ? 2019 Camry Hybrid, and 2019 ? 2021 RAV4 Hybrid vehicles may exhibit a MIL ON condition with Diagnostic Trouble Code (DTC) P019064 (Fuel Rail Pressure Sensor ?A? Signal Plausibility Failure). The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition. Follow the Repair Procedure in this bulletin to address this condition.
TSB013118Rev2
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Camry and Camry Hybrid vehicles with a panoramic roof may exhibit a gap between the interior center garnish panel and roof and/or an interior center garnish panel that is loose. Follow the Repair Procedure in this bulletin to address this condition
22TE02
Service Bulletin/Repair Instructions
RL: Although the Steering Intermediate Shaft is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to a steering wheel which potentially, over time, requires the effort to turn the steering wheel to gradually increase and/or for the steering wheel to gradually become slower to return to center. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
CSP 22TE02
Service Bulletin/Repair Instructions
Toyota Safety Recall and Service Campaign - Technician Certification Requirements 3.24.2022
Customer Support
Service Bulletin/Repair Instructions
DP: Although the Steering Intermediate Shaft is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to a steering wheel which potentially, over time, requires effort to turn the steering wheel to gradually increase and/or for the steering wheel to gradually become slower to return to center
TSB002822
Service Bulletin/Repair Instructions
TSB: Some 2018 model year Camry and Camry Hybrid vehicles may exhibit a condition in which the steering wheel requires increased effort and/or exhibits reduced return to center. The steering wheel may exhibit a slight resistance at certain points during low-speed steering maneuvers. This condition may be caused by the lower universal joint of the steering intermediate shaft assembly. A new steering intermediate shaft assembly has been developed to address this condition
TSB002019
Service Bulletin/Repair Instructions
OBSOLETE NOTICE March 22, 2022: This bulletin is now obsolete. Please see T-SB-0024-22.
TSB002422
Service Bulletin/Repair Instructions
TSB: Some 2018 model year Camry and Camry Hybrid, 2019 model year Avalon and Avalon Hybrid, 2020 ? 2021 model year Highlander, Highlander Hybrid, and Corolla, and 2021 model year Sienna Hybrid vehicles may exhibit decreased front windshield defroster performance at extremely low ambient temperatures. This condition may be the result of the fresh/recirculation servo actuator separating from the servo. This condition does not affect the airflow of the defroster. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0119-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2020 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 10) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 4). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-SB-0104-21
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2022 model year Toyota vehicles equipped with an A25A-FKS, A25A-FXS, or M20A-FKS engine may exhibit one or more of the following conditions: ?Milky/Discolored engine oil. ?An ?Oil Pressure Low? warning message on the Multi-information Display (MID). ?A MIL ON condition with Diagnostic Trouble Codes (DTCs) P05202A (Engine Oil Pressure Sensor/Switch "A" Signal Stuck in Range) and/or P052477 (Engine Oil Pressure too low [Severe]). Moisture from blow-by gases condenses and accumulates in the engine oil during short trips in extreme cold weather. When the moisture in the oil freezes, the oil pressure may drop, and the aforementioned warning indicators may display. Follow the procedures in this bulletin to address these conditions.
T-SB-0094-21
Service Bulletin/Repair Instructions
TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
T-TT-0578-19 Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ?Difficulty to pair the phone. ?Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ?Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-SB-0116-20 Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2021 model year Camry and Camry Hybrid vehicles may exhibit the weatherstrip on the panoramic roof center glass peeling on the edges of the glass. Follow the Repair Procedure in this bulletin to address this condition.
21TC03 Dealer Da
Service Bulletin/Repair Instructions
DD: SPECIAL SERVICE CAMPAIGN 21TC03 (Remedy Notice)
21TC03 Region Le
Service Bulletin/Repair Instructions
RL: The subject vehicles are equipped with a low-pressure fuel pump which may stop operating. If this were to occur, warning lights and messages may be displayed on the instrument panel, and the engine may run rough. This will lead to the vehicle entering a failsafe driving mode in which the vehicle can still be driven for certain distances.
21TC03_DL_Toyota
Service Bulletin/Repair Instructions
DL: The subject vehicles are equipped with a low-pressure fuel pump which may stop operating. If this were to occur, warning lights and messages may be displayed on the instrument panel, and the engine may run rough. This will lead to the vehicle entering a failsafe driving mode in which the vehicle can still be driven for certain distances.
21TC03_Fuel Pump
Service Bulletin/Repair Instructions
TI: TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN 21TC03 LOW-PRESSURE FUEL PUMP
Special Service
Service Bulletin/Repair Instructions
RE: The subject vehicles are equipped with a low-pressure fuel pump which may stop operating. If this were to occur, warning lights and messages may be displayed on the instrument panel, and the engine may run rough. This will lead to the vehicle entering a failsafe driving mode in which the vehicle can still be driven for certain distances.
T-SB-0046-20 Obs
Service Bulletin/Repair Instructions
OBSOLETE NOTICE July 09, 2020: This bulletin is now obsolete. Please see T-SB-0053-21.
T-SB-0053-21
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation. ?Screen freezing. ?Intermittent rebooting. ?Abnormal clock operation. ?Abnormal Apple CarPlay® operation. ?Echoing during Apple CarPlay® phone call. ?Abnormal Pandora® operation after answering WhatsApp phone call. ?Alexa® app inoperative when using iOS devices. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1010) or Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation. ?Screen freezing. ?Intermittent rebooting. ?Abnormal clock operation. ?Abnormal Apple CarPlay® operation. ?Echoing during Apple CarPlay® phone call. ?Abnormal Pandora® operation after answering WhatsApp phone call. ?Alexa® app inoperative when using iOS devices. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Audio Plus (version 1050) or Premium Audio (version 1050) or earlier may exhibit one or more of the following conditions: ?Intermittent rebooting. ?Pixelated screen during phone calls when using Apple CarPlay®. Some 2018 ? 2019 model year Camry and Camry Hybrid and 2018 ? 2020 model year Sienna vehicles equipped with Premium Audio (navigation version 1030 or 1040) or earlier may exhibit one or more of the following conditions: ?Navigation expiration pop-up that is more than a year in the future. ?Destination ETA calculation does not account for time zone change or daylight-saving time.
Toyota PRO21-UFR
Service Bulletin/Repair Instructions
UPDATES TO THE 2014-2021 TOYOTA UNIVERSAL FLAT RATE MANUAL
Toyota Safety Re
Service Bulletin/Repair Instructions
Toyota Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0618-20
Service Bulletin/Repair Instructions
TT: During the Phase 3 update to add Apple CarPlay® to 2018 model year Camry, Camry HV, and Sienna vehicle head units, if the procedure in the TSBs aren?t followed exactly as written, damage to the head unit may occur. Please take extra precautions when performing these TSBs.
T-TT-0553-19 Rev
Service Bulletin/Repair Instructions
TT: The new DCA-8000 Diagnostic Charger may cause your facility?s Ground Fault Circuit Interrupter (GFCI) breaker to trip. A GFCI breaker can be tripped for various reasons, one of the reasons may be related to the DCA-8000. We are investigating this issue to determine the root cause. Other reasons the GFCI breaker may trip ?Circuit demand is too high for GFCI rating ?Worn out GFCI internal contacts ?Improper installation or wiring of GFCI breaker
T-TT-0611-20
Service Bulletin/Repair Instructions
TT: To assist with the early detection and early resolution of audio related concerns, it may be requested as part of the remanufactured head unit return to recover MMR data from the head unit. The following steps are instructions on how to retrieve the data from the system and are only to be used when requested by audio suppliers, FTS, and/or FPEs.
T-SB-0041-19_Rev
Service Bulletin/Repair Instructions
TSB: Some 2018 ? 2019 model year Camry, Camry Hybrid, and Sienna vehicles equipped with Entune? 3.0 Audio Plus (version 1010) or Entune? 3.0 Premium Audio (version 1010) or earlier may exhibit one or more of the following conditions: ?Abnormal navigation operation ?Screen freezing ?Intermittent rebooting ?Abnormal clock operation ?Abnormal Apple CarPlay® operation ?Echoing during Apple CarPlay® phone call ?Abnormal Pandora® operation after answering WhatsApp phone call ?Alexa® app inoperative when using iOS devices ?Intermittent rebooting ?Navigation location inaccurate ?Too many or inconvenient U-turns ?Inaccurate speed categories ?Inaccurate search matches ?Flashing map update screen A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0047-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE December 13, 2019 Rev1: ? Applicability has been updated to include several 2020 model year Toyota vehicles. ? The Required Tools & Equipment section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 ? 2020 model year Toyota vehicles equipped with a Premium Audio with Dynamic Navigation System require a Special Service Tool (SST) USB flash drive to update the map, points of interest, and system software. The SST is used with applicable vehicles to deliver the update; however, the process for generating license keys differs from previous generations. Before attempting to perform a map update, the head unit?s expiration date must be checked. If the expiration date is still valid, a license key may be generated without the use of an activation card number. Updating the maps without the use of an activation card number is considered an Embedded Navigation Update (refer to pg. 9) and performing this process does not extend the duration of telematic map services. If the head unit?s expiration date is expired, or is expiring within the next 90 days, it should be recommended to the customer to purchase an activation number. Utilizing an activation number will initiate a Dynamic Navigation Update (refer to pg. 3). This Dynamic Navigation Update will perform the Embedded Navigation Update and provide telematic map services for a period of two years from the day that the Dynamic Navigation Update is performed. Activation card numbers are provided in an activation card number pamphlet available through the normal parts ordering system. Follow the process in this bulletin to perform the update.
T-SB-0055-19_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE August 09, 2019 Rev2: ? Step 25 of the Software Update Procedure section has been updated with a Note. May 28, 2019 Rev1: ? The Introduction and Software Update Procedure sections have been updated and the Software Download and Extraction Procedure has been added. Any previous printed versions of this bulletin should be discarded. The procedure in this Service Bulletin is a full reformat of the multimedia system. Failure to follow the procedure exactly as written may cause damage to the head unit. This reformatting changes the system from a Phase 2 to a Phase 3 system, which includes Apple CarPlay® and Amazon Alexa?. The reformat requires all linked files and folders extracted from the zip file to be placed onto the root directory of the USB flash drive, otherwise damage to the head unit will occur. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ.
T-TT-0560-19
Service Bulletin/Repair Instructions
TT: Some customers may experience "tightness" when turning the steering wheel. No Power Steering DTCs are recorded.
T-TT-0558-19
Service Bulletin/Repair Instructions
TT: In some situations, the Blind Spot Monitor (BSM) Beam Axis may not update during the Blind Spot Monitor Beam Axis Confirmation. The procedure recommended below can be used to confirm the beam axis has been updated when performing the Blind Spot Monitor Beam Axis Confirmation.
T-SB-0131-18_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE August 02, 2019 Rev1: * Applicability has been updated to include 2019 model year Camry and Camry Hybrid vehicles. Any previous printed versions of this bulletin should be discarded. Some 2018 - 2019 model year Camry and Camry Hybrid vehicles with a panoramic roof may exhibit a gap between the interior center garnish panel and roof and/or an interior center garnish panel that is loose. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0080-19
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0033-14. ? Applicability has been updated to include 2019 model year Toyota vehicles. Service Bulletin No. T-SB-0033-14 is obsolete and any printed versions should be discarded. Some 2006 ? 2019 model year Toyota vehicles in particular geographic areas may exhibit a condition where the HVAC evaporator drain hose has become obstructed with an insect nest. An insect repellent drain hose tip (ARINIX® Tip) is available to help minimize future occurrences of this environmental condition. For some models, a new drain hose is required to properly fit the ARINIX® Tip. Follow the procedures in this bulletin for proper handling and installation of this optional service part. NOTE The ARINIX® Tip is NOT registered or labeled for sale or use outside the United States or Puerto Rico.
T-SB-0134-16-Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0012-13. Service Bulletin No. T-SB-0012-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Toyota specific control unit
T-TT-0551-19
Service Bulletin/Repair Instructions
TT: Some customers may experience an Entune? update pop-up message after every key cycle.
T-SB-0055-19
Service Bulletin/Repair Instructions
TSB: Entune? 3.0 Audio is now available with additional features such as Apple CarPlay® and Amazon Alexa? for 2018 model year Camry, Camry Hybrid, and Sienna vehicles. Follow the Software Update Procedure in this bulletin to install these new features. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ.
T-SB-0057-19
Service Bulletin/Repair Instructions
TSB: Entune? 3.0 Premium Audio is now available with additional features such as Apple CarPlay® and Amazon Alexa? for 2018 model year Camry, Camry Hybrid, and Sienna vehicles. Follow the Software Update Procedure in this bulletin to install these new features. NOTE Performing this update may change certain head unit operation conditions. For a full list of changes, see System Limitations and FAQ. NOTICE Failure to follow the Software Update Procedure exactly as written may cause damage to the head unit.
T-TT-0442-17_Rev
Service Bulletin/Repair Instructions
TT: Safety Connect is a vehicle option which requires a subscription fee for the system to be active after the initial trial period. Once the subscription has expired the DCM (Telematics Transceiver) will be in an inactive state. In some instances, a DCM may need to be replaced even though the customer is not using the service. If registration of the replacement DCM part is attempted using the Techstream utility after the account has become inactive, the registration will fail, and messages such as ?ATX webserver is Down? or ?ATX error? will be displayed.
T-TT-0537-19
Service Bulletin/Repair Instructions
TT: The blind spot monitor (BSM) sensor angle inspection is used to confirm that the BSM sensor is within the specified angle before performing axis beam adjustment. When used in conjunction with the repair manual, these BSM tips leverage SSTs and readily available tools to support sensor angle confirmation in varying shop environments.
J0R_Region Email
Service Bulletin/Repair Instructions
Region Email: The involved vehicles are equipped with Intelligent Clearance Sonar (ICS). Due to improper software programming in the ICS system, the ICS system may improperly activate when an involved vehicle enters certain types of carwash facilities and is placed into neutral. If the ICS system activates, the ICS system will exhibit warnings and the system may apply the brakes.
J0R_Clearance Wa
Service Bulletin/Repair Instructions
Technical Instructions: Update 4/9/2019: Note added on p. 5. TECHNICAL INSTRUCTIONS FOR SPECIAL SERVICE CAMPAIGN J0R INTELLIGENT CLEARANCE SONAR (ICS) SYSTEM REPROGRAM CERTAIN: 2018 CAMRY & CAMRY HYBRID 2016 ? 2018 PRIUS 2017 - 2018 PRIUS PRIME
T-SB-0020-19
Service Bulletin/Repair Instructions
TSB: Some 2018 model year Camry and Camry Hybrid and 2019 model year Avalon and Avalon Hybrid vehicles may exhibit decreased front windshield defroster performance at extremely low ambient temperatures. This condition may be the result of the fresh/recirculation servo actuator separating from the servo. This condition does not affect the airflow of the defroster. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0414-16-Rev
Service Bulletin/Repair Instructions
TT: Some customers may encounter Bluetooth® connectivity concerns such as: ? Difficulty to pair the phone. ? Intermittent Bluetooth® failure to connect to the vehicle when first turning on the vehicle. ? Various Bluetooth® Audio functions are no longer functioning with customer?s phone such as ability to change the track using the steering wheel controls. These concerns can be caused by changes made on the customer?s phone. Make sure to inquire with the customer if the connectivity concerns occurred after receiving an operating system update on their phone, or if they have restored their phone data/settings recently.
T-TT-0511-18-Rev
Service Bulletin/Repair Instructions
TT: Vehicle control apps might not operate as expected at times due to preconditions (normal operating parameters) not being established, vehicle settings and/or network/cellular coverage concerns.
T-SB-0019-19
Service Bulletin/Repair Instructions
TSB: This bulletin details the supplemental procedure to confirm Telematics Data Communication Module (DCM) activation for applicable 2017 ? 2019 model year Toyota vehicles after the process is initiated by Techstream. The steps outlined in this bulletin include: ? Techstream Messages ? DCM Activation Confirmation ? Vehicle Confirmation
T-SB-0044-16_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 7, 2019 Rev2: * Applicability has been updated to include 2010 - 2014 model year Matrix, 2017 - 2019 model year C-HR, 2019 model year Corolla Hatchback, and 2018 - 2019 model year Toyota vehicles. G418 The Introduction and Repair Procedure sections have been updated. March 7, 2017 Rev1: * Applicability has been updated to include 2017 model year Toyota vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0040-08. * Applicability has been updated to include applicable 2016 model year vehicles. Service Bulletin No. T-SB-0040-08 is obsolete and any printed versions should be discarded. Some 2010 - 2019 model year Toyota vehicles may exhibit paint stains after the removal of Rapgard. The paint stains may appear to be under the clear coat but are usually under wrinkles in the Rapgard. The wrinkles may trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof, and trunk. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0516-18_Rev
Service Bulletin/Repair Instructions
TT: The microphone circuit passes through the DCM before reaching the radio/navigation system. To simplify the diagnosis of the microphone, Safety Connect SOS button lights, and DCM (Telematics transceiver) inoperative conditions, refer to the procedure below to prevent unnecessary parts replacement.
Lexus Safety Rec
Service Bulletin/Repair Instructions
Safety Recall and Service Campaign - Technician Certification Requirements
T-TT-0503-18_Rev
Service Bulletin/Repair Instructions
TT: When used in conjunction with the Repair Manual, these Blind Spot Monitor, Forward Recognition Camera, and Front Millimeter Wave Radar tips leverage SSTs and readily available tools to support target placement in varying shop environments.
Technician Certi
Service Bulletin/Repair Instructions
Safety Recall and Service Campaign - Technician Certification Requirements
T-SB-0052-18
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0274-17. * The entire bulletin has been updated. Service Bulletin No. T-SB-0274-17 is obsolete and any printed versions should be discarded. Some Japan-produced 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio (version 1000) or earlier may exhibit one or both of the following conditions: * Bluetooth® continuously connects and disconnects * Inoperative Entune voice recognition Some 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio (version 1021) or earlier may exhibit one or more of the following conditions: * Unable to update radio * Software Information screen displays in French * Phone Number Favorites missing from Home screen * Intermittent radio freezing * Software enhancements * Terms of Service has garbled characters * Incorrect Entune application is recommended for installation on the phone after Bluetooth® pairing * Certain apps disappear when reordered A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0274-17_Obs
Service Bulletin/Repair Instructions
TSB: OBSOLETE NOTICE June 22, 2018: This bulletin is now obsolete. Please see T-SB-0052-18.
T-SB-0050-18
Service Bulletin/Repair Instructions
TSB: Some 2018 model year Camry and Camry HV vehicles equipped with Blind Spot Monitor (BSM) may exhibit a BSM outer mirror indicator that stays on without a vehicle in the detection area, after being passed by another vehicle. Follow the Repair Procedure in this bulletin to address this condition.
T-SB-0285-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE May 21, 2018 Rev2: * The entire bulletin has been updated. January 19, 2018 Rev1: * The Introduction, Software Update Information, and Software Update Procedure sections have been updated. Any previous printed versions of this bulletin should be discarded. Some 2018 model year Camry and Camry HV vehicles equipped with Entune 3.0 Audio Plus (version 1004 or earlier) or Entune 3.0 Premium Audio (version 1000 or earlier) may exhibit one or more of the following conditions: * Abnormal display operation in the destination screen after "IG-ON" * Abnormal turn-by-turn direction operation * Inaccurate traffic information displays * Abnormal navigation routing * Abnormal destination and ETA operation while navigation is operating * Abnormal rerouting operation * Abnormal navigation operation after "IG-OFF/ON" cycle * Navigation will not avoid areas that have been set to avoid * Intermittent rebooting * Navigation will not set from Destination Assist * Navigation will intermittently not boot up after "IG-ON" * Abnormal operation when selecting unplayable songs from the USB flash drive * Abnormal screen appearance * Abnormal music browsing when manually browsing music * Apps take a long time to load * Abnormal shuffle function when listening to iPhone * Voice output for temperature is incorrect unit * Rebooting when connecting an Apple® device with more than 501 podcasts * Abnormal brightness of Entune apps * Voice Recognition inoperative * Delay after answering a phone call * Incoming call continues to ring (unable to answer or decline).
T-TT-0472-17_Rev
Service Bulletin/Repair Instructions
TT: Some customers may experience an inoperative Entune Apps Suite and Scout moving maps when connecting an Apple device with iOS version 11.2.1 - 11.2.5 via USB tethering.
T-SB-0274-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE February 19, 2018 Rev2: ? The Software Update Procedure section has been updated. January 4, 2018 Rev1: ? The entire bulletin has been updated. Any previous printed versions of this bulletin should be discarded. Some Japan-produced 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio (version 1000) or earlier may exhibit one or both of the following conditions: ? Bluetooth continuously connects and disconnects ? Inoperative Entune? voice recognition Some 2018 model year Camry and Camry HV vehicles equipped with Entune? 3.0 Audio (version 1001) or earlier may exhibit one or more of the following conditions: ? Unable to update radio ? Software Information screen displays in French ? Phone Number Favorites missing from Home screen ? Intermittent radio freezing ? Terms of Service has garbled characters ? Incorrect Entune? application is recommended for installation on the phone after Bluetooth pairing ? Certain apps disappear when reordered A software update is now available to address these conditions. Follow the Software Update Procedure in this bulletin to update the software.
T-SB-0009-18
Service Bulletin/Repair Instructions
TSB: The purpose of this Service Bulletin is to elevate awareness and provide best practices for leather and synthetic leather care in Toyota vehicles. As an additional resource, if the vehicle is equipped with factory leather seats, the vehicle Owner?s Manual will highlight the importance of proper maintenance and provide guidance for care.
T-SB-0304-17_Rev
Service Bulletin/Repair Instructions
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
H0X_Toyota Safet
Service Bulletin/Repair Instructions
Safety Recall and Service Campaign - Technician Certification Requirements.
T-TT-0472-17
Service Bulletin/Repair Instructions
TT: Some customers may experience an inoperative Entune? Apps Suite after connecting an Apple device with iOS version 11.2 or later via USB tethering.
T-SB-0322-17
Service Bulletin/Repair Instructions
TSB: Some 2018 model year Camry and Camry HV vehicles may exhibit a condition where the incoming caller will hear an echo during a Bluetooth call through the head unit. This applies to Panasonic head units equipped with JBL. Updated head units are available through the exchange program to address this condition. Follow the Repair Procedure in this bulletin to address this condition.
T-TT-0467-17
Service Bulletin/Repair Instructions
TT: While performing T-SB-0274-17, some vehicles may not accept the software update. To verify the current software version and to see if the head unit needs to be updated, please see the recommendations below.
T-SB-0204-17_Rev
Service Bulletin/Repair Instructions
TSB: REVISION NOTICE November 14, 2017 Rev2: ? The Warranty Information, Before Inspection, and Road Test sections have been updated. July 11, 2017 Rev1: ? The Warranty Information and Before Inspection sections have been updated. Any previous printed versions of this bulletin should be discarded. Pre-Delivery Service (PDS) is a critical step in satisfying our new car customers. Customer feedback indicates the following areas deserve special attention when performing PDS: ? Careful inspection for paint chips/scratches and body dents/dings. ? Proper operation of electrical accessories (including interior light, clock, and radio reset). ?Interior cleanliness. ? Proper function of mechanical systems. A new PDS Check Sheet has been developed for the 2018 model year Camry/Camry HV. Some check points have been added, expanded, or clarified. Bulletins are available for items in bold type.
T-SB-0304-17
Service Bulletin/Repair Instructions
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
Safety Recall an
Service Bulletin/Repair Instructions
Update on Technician Certification Requirements.
T-PG007-01
Service Bulletin/Repair Instructions
Replacement vin plates.
T-PG002-91
Service Bulletin/Repair Instructions
Product general information.
Reading this report
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.