Vehicle report
Technical service bulletins are instructions a manufacturer sent its dealers about a known fault. They are not recalls and the work is usually not free, but they are the clearest signal of a problem the manufacturer already knows about.
TSB003220
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
TTT063620
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
T-TT-0636-20 Rev
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0032-20 Rev
TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
T-TT-0636-20
TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
T-SB-0304-17 Obs
TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
T-SB-0032-20
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
PG004-97-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
PG006-01-Obsolet
Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
T-SB-0304-17_Rev
TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
T01_Dealer Packa
Dealer Package: July 25,2018 The Parts Ordering section has been updated with new contact information. Toyota will initiate a Special Service Campaign to notify vehicle owners to affix a label that identifies the location of the On Board Diagnostic (OBD II) Data Link Connector (DLC) on certain 1994 thru 1996 model year Toyota Camry and certain 1994 thru 1995 model year Previa vehicles. Toyota has determined that the location of this OBD II service connector may be difficult for service technicians to readily identify on the affected vehicles. As a result, Toyota is providing an adhesive label which illustrates the location of the service connector to the owners and asking them to install the label at a specified location on the vehicle. This will enable the service technicians to readily locate the data link connector. It is anticipated that most of the vehicle owners will affix the label themselves, however, some vehicle owners may choose to bring the vehicle in and request your service department to affix the label. If this is the case, please perform the label installation at no charge to the customer. The instruction and reimbursement procedures are provided in this package.
T-SB-0144-08_Obs
TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
T-SB-0304-17
TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
TSB018217
TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
Safety Recall an
Update on Technician Certification Requirements.
T-SB-0101-11 Rev
TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
T-SB-0014-11 Rev
TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
T-SB-0134-14
TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
T-TT-0010-10 Rev
Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
T-TT-0213-13
Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
T-SB-0185-13
The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
TS-BO030-01 Obso
This bulletin is now obsolete. Please see T-SB-0185-13.
T-SB-0071-11 Rev
The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
T-SB-0141-13
A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
T-SB-0071-11
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
01005
A541E TRANSMISSION SOLENOID IDENTIFICATION. *TT
03704
ENGINE BANK 1 AND BANK 2 A/F AND 02 IDENTIFICATION. VARIOUS TOYOTA MODELS. *TT
04013
OWNER RENOTIFICATION OF NON-COMPLETED SPECIAL SERVICE CAMPAIGNS AND LIMITED SERVICE CAMPAIGNS. *TT
TC01030
INFORMATION REGARDING STEERING WHEEL SET NUT. *YD
T-PG007-01
Replacement vin plates.
AX00101
TECHNICAL SERVICE BULLETIN REGARDING RETRO-FIT INTERNAL TRUNK RELEASE KITS. *TT
ST00200
INFORMATION REGARDING A CHANGE IN THE STEERING WHEEL INSTALLATION NUT TORQUE SPECIFICATION. *MR
AX00499
SUBJECT REGARDING TOYOTA DINGHY TOWING GUIDE. *TT
020499
INFORMATION REGARDING REVISED TIMING BELT TENSION SPRING. *TT
980812
SUBJECT ON PARKING BRAKE CABLE. *YC
BR00398
NEW FRONT BRAKE PADS ARE AVAILABLE TO REDUCE FRONT BRAKE GROAN NOISE, GRINDING NOISE, SQUEAK OR VIBRATION. *YC
DL00198
REPLACEMENT OF THE FRONT AXLE HUB NUT. *YC
970523003/97
AN IMPROVED ALTERNATOR BELT ADJUSTING BAR AND A/C COMPRESSOR MAGNETIC CLUTCH ROTOR SUB-ASSEMBLY ARE BEING MADE AVAILABLE TO ELIMINATE COMPRESSOR KNOCKING NOISE AT IDLE. *YC
TC00197
A541E VALVE BODY GASKET NO.2. *JD
TC00197A
THE SHAPE OF VALVE BODY GASKET NO.2 HAS BEEN CHANGED. *JD
EG00197
INTERAL ENGINE NOISE WHEN IDLING AT NORMAL OPERATING TEMPERATURE. *JD
TC95007
A541E ATM SHIFT QUALITY. *TW
COM0401C
CAMRY-FE ENGINE BALANCESHAFT ASSEMBLY. *TW
EG95003
CAMRY 5S-FE ENGINE BALANCESHAFT ASSEMBLY. *TW
COM0401A
AUTOMATIC TRANSMISSION FLUID SEEPAGE. *TW
TC95002
1994 CAMRY ATM (A541E) FLUID SEEPAGE. *TW
EG95001
CHANGES IN RADIATOR AND UPPER TANK ASSEMBLIES. *TW
T-PG002-91
Product general information.
Complaint counts are reports filed with NHTSA, not failure rates. A common model collects more of them than a rare one that breaks more often.